beko WM/WMB - error code meanings and solutions

[@alescoderl4658]

Hi l got WMB 81466 and show me safety on display. What is the problem?

[@Amy-ye1eh]

I have an E13 code, but E12-16 are missing from this helpful instructional. Can you please tell what E13 is?

[@thelaundrycookie1200]

beko don't provide information about E12-E16. can you describe what the machine does before the E13 code appears? or even better, email me a video if possible. it might give us a clue of the faulty component(s)

[@Amy-ye1eh]

@@thelaundrycookie1200From the LED lights, machine looks like it will start normally in a cycle, yet when I press start, the wash light comes on solid for about 30 seconds, then starts blinking, with no cycle start. Does this on all wash cycles.

[@thelaundrycookie1200]

does it take water in? or does it not even reach that point?

[@adinazainea2133]

Hi! I got an htv8636xs0, error code E00. I'm at a loss, can't find the error anywhere for the life of me. I know it's not the same model but I'm desperate :( do you know what it may be about?

[@thelaundrycookie1200]

E00 shouldn't be an error, rather the machine telling you that there are no stored errors, in the same way as mine displays E-- when i do error reading. are you able to tell me what happens just before you see E00 appear?

[@snailcarpaccio]

We have E18 error but the door will not open at the end of the cycle to allow us to redistribute the load? Is there a way to override the door lock? The machine is definitely draining and we have cleaned and drained the filter

[@thelaundrycookie1200]

unusual, perhaps try running a drain cycle (spin but set to "no spin") to see if it unlocks after that. if not then there must be an issue with the lock not releasing

[@DaxellWells]

Did you ever find a solution that worked?

[@snailcarpaccio]

I did, I used a piece of ribbon to open it, I saw it demonstrated in another video!

[@DaxellWells]

@@snailcarpaccio Can you link me please?

[@DaxellWells]

@@snailcarpaccio Awesome! Can you give a link?

[@MrDonovan124]

I have this exact machine and I washed a heavy duvet in it. It finished the cycle and seemed okay but now won't spin or start a new cycle for anything else. Showing e18 and won't start even if i redistribute the load

[@thelaundrycookie1200]

E18 indicates failure to spin due to unbalanced load. you mention it won't start at all - E18 should not prevent the machine starting. try unplugging the machine for a minute or so, then plug it back in and try starting a cycle again. if it still doesn't start then there's a potential PCB fault. hard to diagnose such a fault without being in front of the machine.

[@Nabagerekka]

What if the machine simply shows err with no number?

[@mikoajf1617]

Hi what if the machine have got na error number 18? Won't start and I have a problem to remove the error.

[@thelaundrycookie1200]

E18 means the machine couldn't complete the final spin due to not being able to balance the load. this should not stop you from starting a cycle. turn the dial to off, then try starting the cycle that you're trying to run.

[@mikoajf1617]

Again the same it won't start but I've noticed also that the door doesn't lock.

[@mikoajf1617]

I can't reset this fault. Washing machine has number wmb 71032 (Beko).

[@thelaundrycookie1200]

you mention the door not locking, it sounds like you could have an issue with the door lock. it's possible that the E18 error was either stored from a previous wash cycle, or it could be a false error. beko can be weird with door lock issues, mine had an issue where the door suddenly just never locked (yet worked as normal), but it also never gave an error. even before it broke, i once started it without the door shut and the only thing it did was reset the cycle as if i had never started it. no error. so if it's not locking, i suggest checking the door lock. you could also try entering service mode and seeing if it'll pass through that (i have a tutorial video for that if you need it). let me know how you get on.

[@algerianeagle13]

hi j have the same problem did you solved it?

[@johnkennedy1242]

what if the machine will not work at all (can't rinse) due to E17 Thanks

[@thelaundrycookie1200]

E17 is an oversuds error. if the drum is full of suds, add a bit of fabric softener into the main wash compartment of the drawer, followed by some water. this will help to remove the suds because fabric softener neutralises detergent.

[@johnkennedy1242]

@@thelaundrycookie1200 Drum is empty .. Flashing start symbol at 12 oclock position which changes to @12000 at Rinse position

[@johnkennedy1242]

@@thelaundrycookie1200 won't cycle through options in test mode .

[@thelaundrycookie1200]

hmmm strange that it doesn't cycle through the options in service mode. maybe it's glitched🤔

[@AnjanduudLLC]

How to fix that it doesn't work on 4 5 when tested

[@thelaundrycookie1200]

4 and 5 are motor tests so if it's not doing anything then the motor likely needs new brushes (for brushed models), or there's likely a fault on the inverter board (for brushless models).

[@davidmoore1473]

What is f3 code on beko washer please

[@thelaundrycookie1200]

do you mean E03? as mentioned in the video, this is an indicator of a fault with the NTC (ie the thermostat). could also be a fault with the heater relay on the PCB

[@nabingorkhali2367]

What is the solution for E10

[@thelaundrycookie1200]

E10 means the door is jammed. the door lock is probably at fault so try replacing that. however be aware that E10 may be caused by other internal issues such as the PCB

[@nabingorkhali2367]

@@thelaundrycookie1200 thank yoj so much for your suggestion

[@nassormbarouk4006]

E17

[@allin-wh7ks]

What is the solution for e11

[@thelaundrycookie1200]

E11 is a motor fault. first step is to check the brushes. if they're still good then it could be the motor itself or a potential board fault

[@allin-wh7ks]

@thelaundrycookie1200 Thanks for your reply. I have beko wtb741r2a 7kg. Moter brush is fine but when machine start then stop after 5 minutes no spinning.

[@thelaundrycookie1200]

when you say no spinning, do you mean there's no movement in the drum at all?

[@allin-wh7ks]

Yes when it starts then it moves but after few minutes it torally stops nd doesn't move at all

[@thelaundrycookie1200]

if you check the brushes and they are fine, then it's either the motor itself or a PCB fault