Benchy McBenchface - The extreme benchtable gaming PC / workstation

This build was done to try something new. A build without a case, where everything would be visible.
So much work has went into this. The distro plate alone has taken an absurd amount of time to plan, machine & polish.
The build was completed quite a while ago, but I have never gotten around to actually editing a video until now.
Specs:
Mobo: ASUS ZENITH EXTREME X399
GPU: 2 x ASUS ROG POSEIDON 1080ti
CPU: AMD RYZEN THREADRIPPER 1950X
RAM: CORSAIR DOMINATOR PLATINUM 32 GB 3200 MHZ
SSD: 2 X CORSAIR MP500 480 GB M.2
PSU: CORSAIR RM1000X
CASE: OPENBENCHTABLE BC1
Total cost of this PC for the hardware parts alone was around 5500 USD - Add in the custom parts, and time spent and that number would go up quite a bit.
A lot of people wonder where the radiators are located. The build is actually done with external radiators in mind, and I will be showing off the radiator station that cools this thing later on. The hybrid graphic cards actually help keeping the fluid temp down as I run them at low fan speeds at all time where they are barely audible.
Facebook: / designsbyhps
Instagram: / hans_peder_sahl
Music by: www.bensound.com

[@seanning1276]

forgot to mention , your work is unbelievably breathtaking

[@HFIT]

Definitely quality over quantity with a Hans Peder Sahl video...waits ages, gets 53 seconds :) ...but what a 53 second video that was! Amazing piece of kit.

[@murrayjamieson9502]

Always fantastic builds, great colour coordination, layout and choice of parts. I guess a lot of planning goes into these builds.

[@hemoverthere13]

Dude so inspired, no idea where to start.

[@hed420]

That's sick! Wish I had a cnc machine and a 3d printer.

[@MuseyAJLYu]

I never expected this form of chassis! Super creative!

[@rach911]

This is amazing work. Extremely impressed.

[@martindamm5306]

Your builds are unbelievable

[@upsnef11]

the master strike back , im so impressed every time you post something

[@metap0Pe]

Thanks buddy, appreciate it!

[@jedidefinitivo]

Clean, Beautiful and minimalistic. Great taste as always.

[@ericpipe141]

Easily one of the coolest bench tables I have ever seen.

[@PCSheepy]

Amazing job! You need to get these into mass production dude 👍🏽

[@metap0Pe]

Thank you! The price would be way to high for any sort of mass production, and to get the price down, an injection mold would have to be made, and no way that investment would be paid off.

[@PCSheepy]

hans peder sahl ye I guess so. Equally it wouldn’t be as special if anyone could have one.

[@metap0Pe]

“With everyone super, no one will be” - Syndrome

[@rafael21cheb]

@@metap0Pe I would like to ask. Have you posted the technical details of this project? 3d model, etc?

[@TheDutchmanModifies]

I admire your skills, Hans! Keep up the epic work!

[@waggie]

without words to descripe this masterpiece

[@adrien9219]

Beautiful !

[@colinrafferty4697]

Absolutely Stunning

[@audiotestchanneltm]

Amazing work Hans!

[@martinkent_]

Let’s just take a minute to realize that this work of art is a computer

[@TrailFeatures]

This is amazing! ...unless you have a cat. It would last about five minutes before it ended up on the floor.

[@metap0Pe]

Hulk-cat confirmed.

[@audiotestchanneltm]

Or …unless you have a Linus. ;)

[@sumwunudontknow]

Flexing with that Spacemouse ;) Awesome work as always!

[@puertadlm163]

Damn finally someone recreated the build from pc part picker.

[@metap0Pe]

This is the same build :-)

[@PC_Gaming_Tech]

Masterpiece! Well done!

[@grogers717]

Great job, Hans! I like it. Build one for me since I don't have a cat, no worries.

[@hebu560]

I love your work :)) Beautiful

[@Michael-Madrid]

Glorious!

[@philippemongenie7167]

C'est une pure merveille 🤩 !!!!!!!!!!!!!!!!!!!!!

[@joshuagreening3713]

Awesome man... Good Job!

[@maximebakleh8052]

He is back!

[@ErraticBuddha]

MORE!!! need to see more!!!!!

[@adrianpicos4447]

could you make the files public or send it to me to do it whit a cnc and customice it please

[@TheRipper3564]

Amazing. Do you have a Blog or any kind of Way to follow your Work?

[@설설-h9n]

It's awesome. May I buy that water plate though?

[@amshermansen]

Top notch work man :D

[@Pr0toc01]

THATS AMAZING! Absolutely stunning work. Maybe I missed it, but wheres the radiator???

[@nithitpiriyasathit6161]

Awesome!! I love it! 😍😎

[@seanning1276]

wahahahahahaha finally hans upload AAAAAAnother VIDEO!!!!!!!!!!!!!!!!!!!!!!!

[@mrferreira5751]

OMG!!! Insane piece of work. Would you make another and sell the full acrylic pieces??? It looks sooooo dammm GOOD!!🧐🧐🧐🧐

[@gymweeb9229]

Oh yes! A new video from Hans?! Instant like! Now let me get a tissue to clean up the drool pool I made on my desk by watching this art!

[@gymweeb9229]

Also sick song! Finally someone not using the metroid theme for the 1,000,000 time... "Cough" Declassified systems "cough"

[@metap0Pe]

Hah, I think I was the first to use the particular melody in the Project NV video. I do believe quite a few people has taken it after that without asking the original author. I always loved the Metroid Prime games, so I have used a lot of remixes from the games in my video, and have one more mix lined up for a future video:D

[@yawg333]

insane. where would you put the rads tho

[@12ayner]

Wow. just wow.

[@muhammadabdul6887]

Good luck all so

[@logic02004]

With mass production of this being unattainable, do you plan to sell or share the G-code files?

[@kieferrecycling]

richtig coolll,sehr schöne arbeit

[@chinguin2617]

What is the model of the CNC machine you use?

[@tgdxdrakoon7019]

How is it cooled? Connected with Radiators under the desk?

[@muhammadchandrazulfikar9813]

no fan and radiator?

[@metap0Pe]

I have it hooked up to an external radiator station

[@user-xh5pi2nf9q]

Hans, what happened with Hex Gear? Can't find them anywhere.

[@kongmengxiong3132]

Would you ever consider selling the distribution plate? Or sell the design for it?

[@jakesullivan3017]

What power button is that? Seen it on test benches but can’t seem to find it anywhere

[@metap0Pe]

It is the one that sits on the motherboard.

[@bobderbraumeister6919]

Next time a completely cubic build! (Just some ideas)

[@carlover4239]

Do you make custom reservoirs? Trying to watercool the Louqe Ghost S1

[@thomasnunn6343]

I want it

[@acquacow]

Why so long for a video? I've been drooling over the photos on the forums for months =)

[@metap0Pe]

I have been super busy with other stuff, and just now found the time and motivation to finish up this video:D

[@tathkara]

Why did you not made the extension cables (GPU) on top of each other. Looks bether i think.

[@metap0Pe]

Then they would not fit under the motherboard. If you pause the video when the pictures flashes trough, you can see the cables.

[@imapow]

i can't find the hard drive. what are you using and where?

[@imapow]

Never mind. Found it.

[@FP3DStudio]

Is this your PC? The 3D mouse says that he is an engineer!! ahahahah Good job!

[@metap0Pe]

I am indeed. The 3D mouse is one of the best investments I have made:D

[@FP3DStudio]

Amazing configuration!! Congrats :D

[@MrGarfi]

Gorgeous! Den er lækker er den :)

[@elascaelasca8154]

How did you build this?

[@metap0Pe]

Drew it up in solidworks, machined from solid acrylic, and did all the cables from scratch. You can see all the work in progress pictures on my facebook: facebook.com/DesignsByHPS

[@gymweeb9229]

Btw I have always been wondering, how wide are the channels in mm?

[@metap0Pe]

Check out my video on how to make distro plates, that shows how these type of things are made.

[@deegleedee]

I'll take one for mini itx pls thx :)

[@1pqlamz466]

How come no one mentioned this thing had no radiators??? How the hell are you gonna the the heat out 😂

[@metap0Pe]

At 0:18 you can see two quick disconnect adapters. They are normally hooked up to an external radiator station. The build can however cool itself if I disable sli since the graphics cards can act as radiators (they are hybrid cards). I had it running bf1 on max settings at a show on a Asus ultra wide monitor like this as I forgot the radiator station. GPU fans had to be at 100% but it worked.

[@1pqlamz466]

@@metap0Pe not exactly sure how fluid can flow with those 2 quick disconnect being unconnected. I would assume u still need a section of tube the complete the loop right? Have you posted anything about your external rad? I would be very interested in that since I'm currently building one myself

[@nithitpiriyasathit6161]

Is the radiator external ??

[@metap0Pe]

Indeed! Another video will come showing that, and maybe even a giveaway of one of them:D

[@mat66hub]

Gg guy I love what do

[@metap0Pe]

"guy" :P I stopped believing I was multiple persons years ago.

[@mat66hub]

@@metap0Pe sorry I was wrong in writing 😂😅

[@papabar8461]

👍

[@sjn8099]

Only Great :)

[@josiasperez03]

youtube algorithim .... not gonna lie ...its beutiful

[@gengpan]

Wow

[@adent6x7]

hawt

[@spitorswallow6579]

slap af det er godt lavet det der😱

[@RetroBerner]

yo....

[@manuelbiedermann4538]

Shut up and take my money!!!!

[@nellynelson965]

Get the fek outa here, thats awesome

[@kV18mAs81]

Like if you came from OCN

[@jamieco0o]

You really need to sell these :)