Benelli TNT135 UPGRADED Clutch Springs!

I got these off of steady garage, really good company and never had any problems with them! They are actually honda grom springs so don't be worried when you see that on the packaging they come in, and they are supposed to increase the tension about 30% over stock!
Buy them here!
www.steadygara...
Overall this install didn't take too much effort or time and is an upgrade I would recommend to anyone! Whether you are trying to do stunts or not the stock springs just don't feel great and this really tightens the lever up.

[@62g12cs]

I suggest you do remove the clutch lever after taking out the slack. Then remove the cable from the arm on the cover. This is a good opportunity to service the lever pivot and grease that and also lube the cable if necessary.

[@Hoodratshiit]

So grom springs and benelli springs interchange?

[@ridesoftail]

Very important to add about a 1/8 of an inch of free play in the cable or your clutch will slip no matter how strong your springs are. I did not see you show the free play in the clutch cable which is most important.

[@Jabb8055]

Hey man whats that white plastic sprocket called? I found small pieces of white plastic in my oil and I think k it might be broken

[@62g12cs]

That would be the oil pump

[@daltonlawler1933]

What’s the purpose of the upgraded clutch springs

[@ExploitGarage]

A stronger bite when releasing the clutch, allowing for clutch dumps for wheelies, or if you just want more control over your clutch this would definitely help compared to soft springs

[@m0n3ym1k3420]

You didn't do the clutch discs? How those come out

[@ExploitGarage]

No, no need they bite hard enough. But when you take off the springs the disc's should come out just by pulling on them

[@johnedwards277]

Hi can you tell me what springs you used please can't find out what i need

[@ExploitGarage]

Steady garage has them, they're from sex machine racing

[@toffeeavatar5011]

What bike or so that new clutch spring from?

[@ExploitGarage]

The package said it was for a Grom but I got it off steady garage.com and it was under the Benelli category

[@_jdgeorge_]

Watching you use a pry bar was painful for me to watch you struggle. Surely you realized when taking the cable bracket off you coulda just released the cable then. 🤣🤣

[@ExploitGarage]

I'm reluctant to say... I never thought of doing that.

[@maxph581]

Top speed?

[@ExploitGarage]

I will have that info in a couple days! Currently making a video on the speedo calibration and will have accurate results soon

[@cckidd53]

which sprocket did you buy? and how long did it take you to install

[@ExploitGarage]

I got the pbi 14tooth sprocket, I'm currently editing that video so stay tuned!

[@timdavis74]

@@ExploitGarage i just got a 14 in the mail and put on mine this evening. also bought the 16 to try out.