Benley Episode 3 The Tinkering Continues

  Рет қаралды 5,444

Guy Willison

Guy Willison

Күн бұрын

In this episode we try to figure out why the engine isn't running as smooth as it could be

Пікірлер: 22
@rumien1383
@rumien1383 2 жыл бұрын
Lucky for some eh !. Must be great, being able to phone Millyard for help.
@Davidthomasv8
@Davidthomasv8 2 жыл бұрын
Great really enjoying this series skid
@andrewgirling6069
@andrewgirling6069 2 жыл бұрын
I had this exact issue with an old CJ250t - after hours of fiddling it was the springs in the auto-advance mechanism - They had lost their “springiness” - a new pair sorted it right out - no more running on.
@scottcolley8925
@scottcolley8925 2 жыл бұрын
Loving the videos thank you
@braikka
@braikka 2 жыл бұрын
I've used that photograph trick many times when I've been working on bikes/machines
@kevinbutler3636
@kevinbutler3636 2 жыл бұрын
looking forward to more of these, Thanks.
@davidroberts5175
@davidroberts5175 2 жыл бұрын
super perfect timing. pun intended. I have an 85 200 benley in the shed in its working clothes and this set of vids has super inspired me to get her fired up. great , can't wait for more Sir . Dai Roberts
@guywillison7447
@guywillison7447 2 жыл бұрын
Go for it.
@michaelstanley7742
@michaelstanley7742 4 ай бұрын
My CD200 timing is also right at one end of the slotted holes, in fact I had to file them out a little, I have put this down to aftermarket points being of slightly different proportions to the original.
@jamescornwall2561
@jamescornwall2561 2 жыл бұрын
Great video's Guy, keep them coming please.
@guywillison7447
@guywillison7447 2 жыл бұрын
Thanks for your support.
@garybrown4854
@garybrown4854 2 жыл бұрын
Hope that sorted it , see in the next episode .
@stevebme2163
@stevebme2163 6 ай бұрын
I have had Benleys for years. I did 160000 miles on one, 66000 on another and the one i am putting back on the road after getting it historical, has only done 50000. Carburettor problems with is leaking fuel from the overflow. Any suggestions. You should be proud of your Benly as lt has been garaged most of its life by the look of things. Clean as a whistle. Mine not so.
@350esp
@350esp 2 жыл бұрын
Try adjusting the idle jet that will sort it
@guywillison7447
@guywillison7447 2 жыл бұрын
I’ll have a go now it’s running a bit better. Before it was so rich adjusting the pilot made no difference.
@timc5303
@timc5303 2 жыл бұрын
You can fit a black and silver number plate if the bike is over 40 years old.
@guywillison7447
@guywillison7447 2 жыл бұрын
Are you sure.
@timc5303
@timc5303 2 жыл бұрын
@@guywillison7447 Hi Guy,Yes. I have a 1973 CB750 and a 1972 CB450 both on black and silver plates.You can check on the DVLA website. Cheers Tim
@jeffsayle7529
@jeffsayle7529 2 жыл бұрын
@@timc5303 From the DVLA and Footman James.........coming into effect from the 1st January 2021, there has now been a change and going forward, any vehicle constructed after 1 January 1980 are now ineligible to display the black and silver number plate despite being recorded in the DVLA’s historic tax class. Those vehicles with a construction date prior to 1 January 1980 will continue to be able to legally display black and silver number plates to avoid any undue costs of replacement.
@girlinagale
@girlinagale 2 жыл бұрын
Are you in Suffolk, because I sold an identical Benly 6 years ago and wonder if it's the same one. Oh I've just seen the number plate and it's a different bike.
@guywillison7447
@guywillison7447 2 жыл бұрын
No Cambs
@girlinagale
@girlinagale 2 жыл бұрын
@@guywillison7447 I'm in Ely now, whereabouts are you?
Benly Restoration Episode 6 (Part 1), My Dream Period Accessory
24:41
Slow motion boy #shorts by Tsuriki Show
00:14
Tsuriki Show
Рет қаралды 9 МЛН
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 7 МЛН
Red❤️+Green💚=
00:38
ISSEI / いっせい
Рет қаралды 84 МЛН
DEFINITELY NOT HAPPENING ON MY WATCH! 😒
00:12
Laro Benz
Рет қаралды 63 МЛН
Iron Head Sportster Final Tinkering Before First Ride-out
21:18
Guy Willison
Рет қаралды 12 М.
guy martin starts a norton nrs 588
3:36
Andover Classic Motorcycle Workshop
Рет қаралды 29 М.
Benly Oil Leak and Timing Gremlins
20:28
Guy Willison
Рет қаралды 8 М.
Fitting Rickman Panniers To The CD200 Benly
33:59
Guy Willison
Рет қаралды 6 М.
When Henry Cole met Allen Millyard
5:45
Henry Cole TV
Рет қаралды 432 М.
5Four Bespoke CB1000R
19:05
Guy Willison
Рет қаралды 6 М.
The problem with Cafe Racers
12:57
bart
Рет қаралды 726 М.
Honda CB1000R 5Four - Steve Plater & Guy Willison Interview
8:43
Benly Build Episode 4, Can I Get My Ride-out
9:44
Guy Willison
Рет қаралды 4,8 М.
Slow motion boy #shorts by Tsuriki Show
00:14
Tsuriki Show
Рет қаралды 9 МЛН