Build A 12'x20' Modern Shed and Deck by Yourself: With Material List

[@tamarathecreator1111]

I would have loved to see the inside

[@NilesProductions]

Check out my follow up video I recently posted about making it solar powered. You can see a bit of the inside. Mostly just shelving and a couple work benches as I did build it to be a storage shed/bike shop. kzbin.info/www/bejne/bWXHq4ilh658mtk

[@Vanessa123nice]

How can I buy plans for this project? Please forward your email or contact info

[@willywonkabar]

@@NilesProductions How's the solar treating you?

[@NilesProductions]

@@willywonkabar So far so good. I bought a little propane heater to warm things up during the winter so I've mainly been using the solar generator to power my lights, electric drums, and guitar amp. Zero issues, been super reliable so far. I must say I'm pretty happy with it. If I were convert the shed to a full time use space, like using it for an office or studio, I'd probably want power from the grid though. Solar generator is perfect for how I use the shed.

[@rccpromotions]

​@@NilesProductions this was an awesome video! How much did it cost in materials to build?

[@anniesthesia]

Those paw prints are seals of approval.

[@NilesProductions]

I wish I left them

[@wendellf8659]

Hands-down the best shed build on youtube.

[@NilesProductions]

Thanks Wendell F! Glad you liked it :)

[@mikerooney7600]

This video is truly a gem. You walk away knowing *exactly* how to do every step of this build. No 1,2 skip-a-few. There should be an award! Thank you

[@NilesProductions]

Thanks Mike! Glad you enjoyed the video 🤙

[@StormyMonday0896]

there are a number of things that could be improved.

[@the_family_jewels9223]

Just love how your fur baby tags along with you as your building.

[@NilesProductions]

I sat on the video footage for a little over a year after the shed's completion before I started cutting. I finally got around to editing it because I wanted to watch Hanson cruising around and getting up to mischief 😋

[@lordvonmanor6915]

Oh geez, this is the nicest shed I've seen on KZbin.

[@NilesProductions]

Thanks Lord von Manor! It's the nicest shed I've built for sure.... it may be the only shed I've ever built but I feel it turned out nice. lol

[@jameskirk3]

For sure. 16' centers would stand up to a heck of a load of snow.

[@jameskirk3]

@@NilesProductions how much did this cost?

[@NilesProductions]

@@jameskirk3 the shed and the deck was a little over $12k

[@MrSlimification]

@@NilesProductions aa

[@ragnarlothbrok3948]

Amazing shed. Really impressed he did all that in only 24 minutes.

[@NilesProductions]

I work fast lol

[@IvanYanev]

I'm still processing the fact that he built that tiny little house on his own ! Hats down ! I have no intention to build anything but still I find you video very satisfying and I really enjoyed it ! Thank you

[@NilesProductions]

Thank you Ivan! Glad you enjoyed the video and build. 🤙

[@garystew2077]

It would be cool to have a rain collection system off of that roof! And it would be so close to your awesome garden. I'm looking to do a shed/rain collection build sometime in the future and will definitely be utilizing this great video. Thank you!

[@NilesProductions]

Yeah, that would be handy 🤙

[@Ironwill_Games]

Some of the greatest multi million dollar companies started with a shed... I wish I had this one!

[@NilesProductions]

Thanks for the kind words. I don't know if I'll ever be a big company but I'm pretty happy to work on my bike and play music in my shed LOL

[@Marley369-r4t]

Wow 😮 that’s so beautiful!!! You did an amazing job! You have great taste! Your wife did a great job with the garden 🪴 ☀️ it makes it really pop! Absolutely gorgeous!

[@NilesProductions]

Thanks! Glad you liked the build/video. I really appreciate the kind words :)

[@JasonExplainsThings]

Ben! This video was fun, inspiring and informative. DIY video gold. I'd love to see a follow-up video on what you did with the interior. Congrats on your beautiful project.

[@NilesProductions]

Thanks Jason! It might be cool to do a walkthrough and show off the inside. It's really just a garden shed/bike shop on the inside, looks way fancier on the outside lol

[@jaylay9524]

The editing for this video is absolutely perfect. It shows everything without getting monotonous. Nice work. I know that's much more difficult than it looks.

[@NilesProductions]

Yeah, I sat on the footage for more than a year before I started editing it. No one in their right mind wants to sift through 18 days of footage 😆

[@ThingEngineer]

I’m not sure at what point this went from shed to tiny house. Awesome job!

[@NilesProductions]

It's still all shed on the inside. Just some shelving and a work bench. LOL Glad you liked it Josh :)

[@AndrewOvenden]

Oh come now, who hasn’t ever ended up with a much larger project than originally intended. What I tell my wife I’m building, and what we end up with frequently don’t match.. Not sure how that happens 😃

[@tortron]

For legal reasons you have to say its a shed lol

[@glenedajoseph2843]

That is what I am saying

[@enrique88005]

@@tortron os that what it is. Then that is an outstanding shed

[@discosanandreas]

This is the video I needed to see today. Great job. Thanks!

[@NilesProductions]

Glad you found and enjoyed the video :)

[@JuicesJuicyJuiceShack]

I love how you got your pup a comfy blanket to lay on while he watched you

[@NilesProductions]

Got to keep the ol boy comfy

[@brendanthegreek]

I am one of North America’s premiere un-handy men, and I thoroughly enjoyed watching this entire video. Congrats on the shed, it looks fantastic.

[@NilesProductions]

Thanks B Williams! Glad you enjoyed the build. I wasn't always "handy" but I feel I get a little better with each project. I find it good to try new things that take you out of your comfort zone sometimes. It has helped me grow as a person and give me confidence to try and do more.

[@MrPicklejuice98]

As a carpenter, you did some really solid work! A few things I would've done differently, but overall a really nice shed. Mainly, larger joist hangers with proper hanger screws instead of construction screws. But I think your method will hold up for decades, so I'm probably just being particular

[@NilesProductions]

Thanks! If I ever build another one I’ll do bigger hangers for sure and nails or hanger screws to fasten it 🤙 After three years it feels as solid as the day I finished. I’m pretty proud of the build being it’s my first shed and all 😆

[@gerryvalentine7671]

I am in awe, by your build quality, your video quality, and your wonderful garden...but especially your old timey fuzzy foreman !! These are the perfect videos to decompress to after a stressful day. God bless you all !

[@NilesProductions]

Thanks Gerry! The fuzzy foreman is the best and why I actually I got around to editing the video. I wanted to watch him cruise around and get up to mischief on video :)

[@barkershill]

Thankyou for posting this vid . Very very helpful to me . Great that you put on some ear defenders and a mask when doing the demolition work but maybe a safety helmet would have been more useful

[@NilesProductions]

Glad you enjoyed the video and I agree with what you say, safety should be a priority. :)

[@yurifrl]

Right soundtrack, great narration, no padding. I really enjoined the video ❤

[@NilesProductions]

Thanks Yuri! Glad you enjoyed the video and thanks for the kind words 🤙

[@julietphillips1991]

I can well imagine how very rewarding this was! It's beautiful and you did a super job!

[@NilesProductions]

Thanks Juliet, it was a good for the soul for sure.

[@adammm8964]

Hands down one of the bed shed build / edits, keep it up would love to see the inside and your plans there !

[@NilesProductions]

Thanks for the kind words Adam m m. I currently plan on keeping the inside pretty simple, just some shelving and a workbench. I'll probably add a small solar generator in the future for lighting and power needs. When I do I'll make a little walk through video.

[@denisesmith209]

I am so glad I stumbled across this. It is almost exactly what I will be building on my land. Thanks for sharing. Nice job!

[@NilesProductions]

Glad you enjoyed the build, thanks for the kind words 🤙

[@jeffbren2151]

Very nice video showing all the steps in a way normal people can understand. Only the cutting of the “Bird boxes” (i.e birds mouth) on the rafters was amusing (shows your human). The tools you used are ones every basic carpenter should have, and you make it look so easy, and your explanations were very logical and uncomplicated. You kept it all very very “doable”, for anyone afraid of taking the step to do it themselves.

[@NilesProductions]

Thanks Jeff. I’m not a professional by any account. Just a guy with some cheap tools that likes to DIY stuff. In life I find I’m using the wrong terminology or mumbling and stumbling my way through it most of the time (bird boxes) With misguided confidence I even wrote “bird box template” on my graphic showing how to make the “bird mouth” cuts. LoL I try and laugh at myself when I sound like an idiot and make mistakes. In the end I hope that people can still understand what I’m trying to communicate. This is the first shed I’ve ever built. I’m proud and very happy with how it turned out. I’m glad you enjoyed the video and want to thank you for the kind words 🤙

[@jeffbren2151]

@@NilesProductions as much as it seems I'm being a jerk picking a little detail apart. Professionals would have a stroke if they say some of my twisted engineering I did on my 2 story shed. And I'm sure I'd get 20 terms wrong if I was good enough to even make a presentable video lime you did. Any "criticism" is more my jealousy that you did a great job, and made an extremely presentable video while doing it.

[@JasonExplainsThings]

The views are climbing! Well deserved Barnyard!

[@NilesProductions]

Thanks homie 🤙

[@GuitarGuyAl]

I'll be starting my own 10x12 build in the coming months. Feels like a massive undertaking already - just in the planning stages. Videos like yours make me feel like it is possible.

[@NilesProductions]

This was my first shed build. It was a little intimating when I started but I took my time and tried to think things through. As the build progressed and everything started falling into place I started feeling more confident. Once finished I was really happy with how things turned out and am glad that I stepped out of my comfort zone and decided to build this vs buying a pre built shed or paying someone else to do it for me :)

[@eltiburon5240]

How much did you spend on this build?

[@NilesProductions]

@@eltiburon5240 It was a little over $12k for shed and deck at the time i built it

[@wrlprchnx]

Almost makes me sad I just went with a Fibreglass pre-built (basically lego) shed for my back yard with how beautiful this looks

[@NilesProductions]

@@wrlprchnx Nothing wrong with going pre-built. I'm glad you liked the build. Thanks for the kind words, Marc Seewald.

[@breavofox360]

Very nice! One of the very few she build videos I’ve watched start to finish.

[@NilesProductions]

Thanks for the kind words Breavo Fox 🙌

[@MDavilus]

I’ve watched a lot of shed videos and this is by far the most detailed. Great job. Hope to it one day.

[@NilesProductions]

Thanks Mark Davilus! Glad you enjoyed the video and build 🤙

[@alfredsarkodie3909]

Loved the background music.

[@NilesProductions]

The music is from Zachariah Hickman :) Glad you enjoyed it

[@boschlotz]

Shingling the whole door in set the whole look over the top! Great work...

[@NilesProductions]

Thanks Bo! Glad you liked it 🤙

[@DanielRichards644]

Joists sitting on Joist Hangers (properly attached to Joist Hangers) don't need the headlok screws from the outside, thats a chunk of change that didn't need to be spent. Also depending on your region and local codes consider Slab on Grade so that you can park a Mower or other equipment in the Shed. Side Note, after setting the "outer frame" of the floor (the 2 end joists and 2 big beams) check for square then and adjust before bolting the plates set in the concrete to the 4x10's, I'm sure you thought of this, but since it wasn't shown felt worth mentioning.

[@L.Scott_Music]

When setting your joist hangers try fashioning a metal bracket to the top of your scrap 2x10 so it hangs on the beam even with the top. Metal strap screwed to the top of the scrap bent into a L shape to clip around the bean outer edge. Really nice job. Much envy.

[@smitaaay]

That's a good idea. I'm gonna do that. 👍👍

[@twzimage]

Great job Ben! I’d love to see the finished interior as well.

[@NilesProductions]

The interior is just shelving and a work bench...I could do a walk through video maybe and show off how it's organized?

[@NilesProductions]

Check out my follow up video about making it solar powered. You can see a bit of the inside. kzbin.info/www/bejne/bWXHq4ilh658mtk

[@NilesProductions]

You can see a little bit of the inside of the shed in my video were I set it up with solar power kzbin.info/www/bejne/bWXHq4ilh658mtk

[@simonlynch4204]

We just bought a piece of land that's wooded and we wanted to put down the first building to store gear and run power to charge our car when camping.... You just gave the the feeling I could pull this off! Thanks!

[@NilesProductions]

This was my first shed. I feel it went pretty well. My advice is do your research, take your time, and don’t be afraid to ask your carpenter friends if you have questions. Good luck on your build 🤙

[@jenniferjeppsen9684]

Your fuzzy supervisor is adorable 🥰

[@NilesProductions]

If you got to have someone barking orders at you and telling you your cuts look ruff there is no one better :)

[@gregwytcherley]

I am in the planning phase of my backyard shed and this inspires me to do it all myself. The pride you must have is well deserved. Thanks for including the supply list as I might use that. Great build and the video was well done! I'm a little worried about my foreman but I'm sure a few tosses of the ball and some treats he will be encouraging.

[@NilesProductions]

A good foreman will bark orders and let you know when your cuts are ruff. Good luck with your build :)

[@ceciliaescobedo5624]

Loved watching your video. It was really educational and entertaining. Learned a lot. My husband and I have a small old house. It's practically ready to be bulldozed. However, you gave me some really great ideas as to how we can salvage some of this 1949 old little house. God bless.

[@Mars21681]

Inspiring. And one of the best build videos I've ever seen. Thank you!

[@NilesProductions]

Thanks for the nice comment! Glad you enjoyed the build and video 🤙

[@Rooster4Grain]

I love the timelapse of you picking up your dogs and disappearing from the frame carrying him. 17:34

[@NilesProductions]

I wish I never painted over those little paw prints.

[@jaminLA]

Very impressive how one man armed with basic tools and materials can build a great looking shed like this.

[@NilesProductions]

Don’t forget I had a very helpful dog as well 😆

[@LibbyClarkeStudio]

First of all, what a great dog! Second, I am so inspired! Thank you! I will be building my own shed soon and this is SO helpful!! I will need to insulate mine a bit, but with this design that would be simple!

[@NilesProductions]

Best dog ever :) As a foreman he could be a little harsh though... always barking orders and telling me my cuts look ruff. Thanks for kind words I'm glad you liked the video Libby Clarke

[@danterusso6354]

Beautiful project!!! Two things: It would have been equally amazing to see electrical/water ran as part of the build. Also, how great would it be to have a ‘roll-up’ or ‘barn door’ entrance on that wall in the front? With that said: I can’t do what you do and my thoughts are part of a wish list for a similar building in our backyard. I am VERY appreciative of you for sharing this!!!

[@NilesProductions]

Thanks Dante Russo :) At the moment I have no plans to run water inside the shed maybe add a hose bib to the outside? The water main from our well runs right next to the shed so it shouldn't be to crazy to install. For electricity I plan on adding a solar generator for lights/small power needs. I considered installing a roll up door on the side but decided against it in the end as I wanted to maximize shelving and storage on the inside plus I already have a small garage off the main house for larger storage needs.

[@bfroutdoors]

Great video man! Huge thank you! I am about to start building a 12x20 cabin in the mountains and I have been debating how to make the two main beams, seeing your 4x10x20 beams I found my solution. Lots of information here so again thanks!

[@NilesProductions]

Very cool, If I ever build another one I want it to be a cabin in the mountains or at least the middle of nowhere.

[@Greg8872]

Very nice, glad YT suggested your video!

[@NilesProductions]

Thanks Greg! Glad you enjoyed the video :)

[@schrodingerscat7218]

No jackals here, just love. Great job, inspiring.

[@NilesProductions]

Thanks Schrodinger's Cat! Question for you. Is the state of a radio active substance and quantum collapse driven by the conscious observer and can be both True and False until observed therefore reality itself is ultimately determined by the conscious observer? Or was Schrodinger's Cat just a teaching tool invented to try and show the absurdity and misconception that quantum state (therefore reality itself) is determined by the observer? Glad you liked the video :)

[@schrodingerscat7218]

@@NilesProductions The answer to your first question is The Many Worlds Theory. The answer to your second question is yes, that was the original intent. You are welcome.

[@johnlysic6727]

Most excellent! I have built 2 sheds on my own but never one this nice- I do need to build one with my middle son next summer, so some of your process will definitely be helpful - thank you

[@NilesProductions]

Glad you liked the build 🤙 This was my first shed build. I learned a lot along the way. The main things I regret was not installing insulation under the subfloor before I laid down the plywood. Probably add it when the weather improves but I have a feeling it’s going to be a little tricky. Lol

[@runewafflz8264]

This is beautiful. Simply amazing. You made this look so easy and fun. Really motivating to us future carpenters and DIY home owners

[@NilesProductions]

Thanks Rune Wafflz! Glad you enjoyed the video and build 🤙

[@benhoff8443]

Thanks for doing the video. You did a great job! Has anyone else already commented about doing your sheathing wrong? You placed your plywood vertical but you want the 8’ running horizontal and then stagger. You give it a lot more structural stability.

[@NilesProductions]

You are the first to make this comment. What you say makes sense though and is good advice.

[@ian18dudley]

No you’re installing the plywood correctly. Installing the plywood vertically allows you to nail rim joist, bottom plate and top plate all within the same sheet. If your sheet doesn’t reach the top then just add a row of blocking.

[@rgbking488]

@@ian18dudley so what was that guy saying about adding more "structural stability?" Doing them vertically is more stability, but horizontally is the standard?

[@george8706]

FIVE STAR A pleasure to watch, you are a professional... you had me 100% when I saw the black plastic vapor barrier go down ... perfect, I would have thrown a little gravel or crush and run on top around the edge to protect it and I only serious suggestion I have is buy some nice foam knee pads-- no more squatting or on your knee caps, that will come back to haunt you in your 60s Excellent information

[@NilesProductions]

My knees got a little raw especially when I was doing the roof. Knee pads are great advice. Glad you enjoyed the video and thanks for the kind words.

[@dontask7898]

This "shed" is built better than most houses and I bet cost as much as a house also. Great job!

[@NilesProductions]

Thanks! Glad you liked the build! It ran a little over $12g for shed and the deck.

[@namelesscleric6657]

Excellent job, very inspiring. Also thanks for the material list helps to put the scale of the endeavour into perspective.

[@NilesProductions]

Thanks Chikwanda, glad you liked the build :)

[@AndrewThronImprovements]

Awesome build with great, detailed instructions! As someone who just built a 10'x10' modern shed, it was great to compare notes. Adding the top plate before lifting the walls vertical was a way better idea 🤣 I went with standalone T1-11 (no plywood sheathing beforehand) as the siding, used a steel roll up door, and went with a asphalt shingle roof. Installing the soffit was probably the most brutal part of the build - at least for me. Curious to see if you felt the same. For my 10'x10' I spent around $3,600 for materials (steel roll up door was $450 of that). You went the extra mile on nearly every aspect of this build, so I am guessing around $8,500? I am currently editing my Modern Shed Build Video for my Channel - so I appreciate the time that went into filming the building process and the editing time afterwards. Excellent job!

[@NilesProductions]

Glad you liked it! I'm a little over $12k into mine with the deck. When I started I budgeted $10k but wood prices kept going up throughout the build. T&G soffit is a nightmare but it looks so good lol. I would love to see your build when your video is done. Reply back with a link when it's up :)

[@clreed9690]

Thanks for sharing your costs!

[@NilesProductions]

@@clreed9690 No problem

[@AndrewThronImprovements]

@@NilesProductions Worth every penny - Looks awesome. And will do! Plan to release it in early Spring 👌

[@Mezzanine99T]

I wondered about the value of plywood sheathing under the T1-11 as well. I suppose it's serving as a shear panel?

[@EightNinePreservation]

This was mesmerizing to watch and has bolstered my confidence for an upcoming build I have. Your explanations were really helpful and it was all the perfect balance of informative without being info overload or drawing it out. Thanks! Also. It looks amazing!! Well done.

[@NilesProductions]

Thanks for the kind words. Glad you liked the build and video :)

[@casewhite5048]

I think you have to film it otherwise it doesn’t work

[@NilesProductions]

That’s sound thinking… you are probably right lol @case white

[@arhodes2866]

The garden and shed with deck look amazing.

[@NilesProductions]

Thanks A Rhodes! I love how the garden looks when everything is in full bloom. The deck is a nice place to relax during summer to watch the bees buzz about doing their work for sure.

[@victorbenner539]

I've been looking for something for my catering commercial kitchen and outside bbq smokers area. This is close to what I had in mind. Of course I'll need to tweak it some but this is a very good start. Nice video. Have a great day 🌤 😀.

[@NilesProductions]

Thanks Victor! Glad you enjoyed the build/video.

[@orionred2489]

Step 0... tell your wife you're gonna be busy for six weeks.

[@jnorris8649]

You should’ve used nails for the floor joist hangers. They have much higher shear strength than screws. I found using a pneumatic palm-nailer was the best way to get into the relatively tight spaces.

[@NilesProductions]

Good advice for sure

[@051biohaz]

I thought that too, until I saw the head-lock’s from the outside

[@NilesProductions]

According to Hilman’s technical data for the Deck Plus #10 screws I used the sheer strength is 2317 lbs. stfasteningsystems.com/deck-plus/#12type I should have used their Structural screws instead of the deck screws as the head sits flush against the hanger vs how the deck screws head is tapered.

[@jnorris8649]

Not trying to miss the forest because of the trees- That shed & deck are gorgeous. Glad you tracked down the tech-specs. It should be alright. Manufacturer approved, application-specific fasteners are an obvious alternative. I will, however, point out that the specs do not suggest joist hangers, or any metal connectors for that matter. I can only assume one reason is the risk of galvanic corrosion when the coating is inevitably stripped as the screw is driven in. This causes the bare metal of the screw to be in direct contact with the dissimilar metal of the hanger. Being exposed to humidity/moisture in general, or even the chemicals in the treated lumber is the last ingredient for fairly rapid oxidation. I’m no engineer, but I’ve done my fair share of home repair, demo, and renovation. I had to renovate a shed, which included gutting/replacing the rotted floor. I spent days and days reading building codes, tips/tricks, etc., and I came across the “don’t use screws for joist hangers” thing. Inspectors will literally fail an entire build if the see 1 unapproved screw in a joist hanger. I’m 110% a “why-guy” & this struck me as a bit extreme, so I chased it down until I came across what made the most sense to me to be the answer. I can’t necessarily tell you where I found it, but wood screws(i.e., deck/general purpose) are specifically designed for tensile loading, rather than radial/sheer loading. When a screw is used to fasten something, it is essentially being stretched as it’s torqued. Having something push on the side of a relatively brittle fastener that is already under tensile load is asking for trouble. Nails(i.e.,10d/16d), however, are not dealing with any real tensile loading. Sure, there’s friction holding them in the wood; but they’re not being stretched. This allows them to be more reliable/robust when dealing with radial/shear loads, or even any movement resulting from the edifice settling. Plus, they’re typically galvanized to inhibit corrosion. Again, I’m just here to share info that will hopefully help.

[@051biohaz]

@@NilesProductions I didn’t mean to come off critical, the shed looks great dude. Really nice job with the t1-11 and the cedar shingles..:)

[@loduke3905]

I am currently knee deep in my 16x20 cabin/tiny house build. She's around 9' on the back and just shy of 14 up top (technically road legal w cheap permit, and easy for a shed moving co to transport). Very close to the exact same modern design with the shed style roof and awning windows up top. I got lucky on some FB MP buys and scored (4) 54"x36" casement windows for only $250 total. They were brand new low E yadda's, still in plastic wrapping never touched. I ran them on either side of my full glass french doors. Flipped 2 of them horizontal and they're now giant awning style windows. Finally finished my exterior work and wrapped up the little 4ft deck on front. I am now getting to the interior build which is exciting and challenging for a single female build. I just installed a lvl beam to run a 8'x20' loft, it'll be close to 5'6 head height and be used as a bedroom and storage. You did a fantastic job on this build 👏. Everything was so organized and thoroughly planned out, lots of little tricks and tips I picked up from the vid. Nice quality material choices all the way around, no short cuts. She'll last a very long time (much longer than my chap lipped of a mess build 🙄🤦🏼‍♀️). Thanks for sharing this 🙏 and I look forward to seeing what else you have in store. ✌🍻

[@NilesProductions]

Wow, your build sounds pretty cool. Are you making a video? I would love to see it when finished. Link back here with a walkthrough or build video when done :)

[@constructionhacks8162]

Hello, This a great video ! My boyfriend and I built our own home. It's a timber house with a concrete slab built on screw piles foundations. Here's a video on how we built the walls ! Hope you will like it :-D

[@rgbking488]

@@constructionhacks8162 where's the video?

[@louisbrown4620]

It’s a nice shed. Beautiful part of the country you live.

[@NilesProductions]

Thanks Louis! Glad you like it 🤙

[@markrev117]

BEst part of these vids is the creativity. Seen so many vids where I prefer the floors of your build than others, but prefer the roof of another vid, but the one slope looks so much easier. GJ!

[@NilesProductions]

Lot of different ways to build a shed for sure. By no means is my way the end all be all it suits my needs and style. For people looking to build I suggest looking at a lot of different designs and builds, then taking the pieces that work for you and build the shed that suits your needs. A lot of inspirational builds out there. 🤙

[@jasonbutler419]

Seriously LOVE this build! Very close to what I'm considering putting up for backyard shop/flex space.

[@NilesProductions]

Thanks Jason Butler! Glad you liked it 😬

[@DeaconDeacon-st9ph]

Love it!Perfect as a tiny house project :) Well done.

[@NilesProductions]

Glad you liked it 🤙

[@darinking1343]

I'm just curious, ballpark, how much do you think the materials were for everything? I think it looks wonderful. Great job! The only thing I would add is insulation as it gets pretty cold here, and if it were my escape room, so to speak, I'd want a little heat in it. ;). Again, awesome job!!

[@NilesProductions]

It was a little over $12k for deck and shed at the time of my build.

[@NotOnYourLife]

Excellent job! Nicely designed and constructed. You did an outstanding job on this and should be proud. One thing to note to anyone trying to replicate this, the subfloor is not 3/4 treated marine plywood, it is just 23/32 treated plywood, typically CD grade or also called Rated Sheathing. Marine plywood is not treated, it is a structurally strong plywood with no voids and constructed with waterproof glue and typically "a" and "b" veneers on the face and back, it will rot just like any untreated plywood. If you go to the lumberyard and ask for treated marine plywood you will either get marine plywood that is not treated (and hideously expensive) or you will get treated plywood that is not marine grade.

[@NilesProductions]

The marine plywood they sale at Home Depot has a lifetime warranty against rot and termites. It's an AB marine-grade pressure-treated plywood. It offers protection against fungal decay in wet environments. It is approved for saltwater applications so is probably a little overkill. You can save a little money by going with regular pressure treated plywood. www.homedepot.com/p/3-4-in-x-4-ft-x-8-ft-AB-Marine-Grade-Pressure-Treated-Fir-Plywood-154459/203527614

[@NotOnYourLife]

@@NilesProductions If I struck a nerve, I didn't mean to, there no need to delete comments that are intended to help.

[@NilesProductions]

Didn’t delete anything. It’s all good brother.

[@idhatemet00]

that feeling when a guy on youtube frames better than most of the framing i see on actual job sites (i'm an electrician, but do a lot of woodworking on my free time.). nice work man, also just an fyi the rafter notches at 7:52 are called birds mouths, not bird boxes😜 lol

[@NilesProductions]

It's funny how much confidence I had when saying bird boxes. I even wrote bird boxes on my little graphic LOL Soon after posting the video I was made aware of my mistake LOL I'm Just over here speaking in mumbles and using the wrong terms stumbling my way through life with all the confidence in the world LOL Glad you liked the video 😁

[@stevenbuffalohead2509]

I’m looking to build a 12x16 “finished” shed, for a backyard office. This video really sums up the structure process. Would you do anything differently with plans to finish the inside? We have a 4 season climate. Thanks and amazing work btw!

[@NilesProductions]

I’m pretty happy with my design for the most part. If I was to use it as a studio or living space I might want bigger windows? I should have used structural screws or hanger nails when installing my joist hangers. Maybe synthetic deck boards? Glad you liked the build Steven.

[@davidcamacho444]

would using a thick concrete slab offer any benefits in cold climate areas (north east)? Perhaps insulation between floor joists an option?

[@TheBellvueRanch]

Awesome build! Thank you for sharing! We are designing something similar, this is a great inspiration!

[@NilesProductions]

Awesome Tom George! I'm glad you enjoyed it :)

[@kieronmonahan2349]

Great video, thanks for taking the time to produce this and edit it, so helpful. Now I want to/need to build one :-D

[@NilesProductions]

Thanks for the kind words Kieron Monahan 🤙

[@dmcguire1442]

Very nice work...I love the design.

[@NilesProductions]

Thank you : ) Was trying to keep the design simple but give add a little flare with the finishes.

[@patchadams4me]

Around here those cuts are called bird's mouth and box returns are called bird boxes. Thanks for sharing!

[@NilesProductions]

I feel there is a good chance that I’m using the wrong words or lingo 90% of the time when I’m trying to communicate on projects like this 🤣 Despite using the wrong term I hope everyone can still understand the step I was trying to convey. Lol

[@Shellz006]

You did an amazing job and I think you have convinced me to give it a shot! I'm looking to do pretty much exactly what you did but 12 x 24 ft instead. I think my biggest hurdle is doing the foundation. I've never had to level something so large. Have any tips on doing the foundation or have a video?? Anyways thanks for making this video. I'm sure you are helping a ton of people by sharing this.

[@NilesProductions]

Thanks Sheldon Gray. I found the batter board method for laying out the foundation to be very useful. The 3-4-5 measuring technique is key in making sure everything is square. Also they make these little bubble leveling tools that hang on the line as well that work great. www.amazon.com/Rope-Bubble-Level-Hanging-Leveler/dp/B07Y8GPJ7H I personally don't have a video showing the method but there are a ton of them across KZbin that should show you the basic concept. kzbin.info/www/bejne/routZ5V7o5V7h7s

[@Shellz006]

@@NilesProductions Thanks for the info man! I really appreciate it! I will definitely look into those.

[@robertforster9482]

If you build a deck longer than the building this gives you outside working and relaxing space. You need it after a hard day in the shed.! 😄

[@Shellz006]

@@NilesProductions I forgot to ask do you know the shed height from highest point of the roof to the shed floor? I'm trying to see if this falls within my 12 ft height limit.

[@NilesProductions]

@@Shellz006 From the floor to the peak cap it's aproxamently 11'. From the bottom of the 4x10 beams it's just under 12'. My front wall is just under10' and the rear wall is just under 8'. The over hangs is 30" in the front and 18" on the back

[@conorreynolds9739]

Really enjoyed this video. Seeing you get everything square was impressive. Really well thought out and organized, I’ve got a termite-ridden shack out back that a replacement like this would be perfect for. As someone who’s been working on a never ending house renovation for over a year, it’s soothing to see something taken near completion in one video…how long did this take you?

[@NilesProductions]

I captured the footage and logged the dates at the end of each day. Looking at my folders of footage it looks like I worked on it a total of eighteen days over the course of a couple months. Some days were just a couple hours others were dawn to dusk.

[@CrosshairLunchbox]

Those brown decking screws aren't made for the shear load of a hangar application. The hangars should be used with nails or the Simpson structrual screws that are stocked near the hangars at the big box store.

[@NilesProductions]

Thanks CrosshairLunchbox. You are correct, I should have used structural screws instead of deck screw for the hangers. I'm not a professional carpenter and am learning as I go... Here is a good video about shear load and screws vs nails for anyone looking to learn more. kzbin.info/www/bejne/p57Em357odOqnKc

[@juniorcarmack8741]

And you only used 2 x 6 hangers for 2x10s they actually sell 2 x 10 hangers so that way the hangers actually a lot taller to get more nailing surface so the board doesn’t twist

[@xpert1111]

true but didn't he add lag bolts to each joist at the exterior side of the rim band? He should be good

[@rgbking488]

@@juniorcarmack8741 any big diff between nails vs construction screws? Forgetting the obvi work of screwing vs nailing. I'm talking like structurally....are screws better? Or what's the dealeo. Curious because I'm going to rip on one of these here this next year

[@D-Z321]

@@rgbking488it’s not whether one is better than the other…. They’re used for different purposes. Nails for “moving or shifting” points, screws for weight or gravity points. Example ive heard used is to screw a screw and hammer a nail equally into a board, then try pulling the nail out and then try pulling the screw out. The nail comes out more smoothly, the screw probably won’t come out. Now, whack the exposed nail and then the screw from the side. The nail will bend, and the screw will most likely break off. The nail handles movement better, while the screw is better for retention…

[@Moondoggy1941]

0:58 We used to use old traffic cones we cut off about 1/3 of it, made a real nice funnel.

[@NilesProductions]

If poring cement that seams like a good idea 👍

[@DanO530.8]

One of the best sheds I’ve ever seen absolutely gorgeous

[@NilesProductions]

Thanks! Glad you like it 🤙

[@brianparker859]

AMAZING WORK! I am just beginning to prep my site for a new cabin and wanted to go modern with rustic elements-- precisely as you have done. Bravo on your craftsmanship! How did you finish the inside? And do you happen to have a list of all the materials?

[@NilesProductions]

The interior isn’t finished as I really did build this to be a shed. It’s just some shelving, storage boxes, and a work bench. I plan on adding a little solar generator for small power needs and lighting in the future. You will find the material list in the video description

[@alejandroperales5424]

Few questions…did you design the structure or hire out to get the plan done for you? Was it a matter of cost to go with pillars vs full on foundation? First time picking up tools or is this what you do for a living, contractor? Final cost?

[@NilesProductions]

Good questions Alejandro. I bought some books and other material on how to build sheds/garages at my local hardware store as well as some simple plans online. I took different design elements from what I found in the book/plans modified them and made my own. For the foundation, the ground is a bit uneven and slightly sloped where I built the shed. I figured it would be less labor intensive to do pier and beam vs trying to level the ground and pour a slab. I also wanted the deck to be slightly raised. The price didn't really factor into the decision. When it comes to tools, I've been a home owner for a couple years and have slowly picked up tools for little projects here and there. I'm not a professional carpenter just a guy with a saw and a hammer that likes to DIY stuff. The final cost was a little over $12k

[@alejandroperales5424]

I *really* appreciate your response! And thanks for all the info as well! Reason I ask is that many “DIYers” that post vids like yours that have “zero” experience turn out to be pro carpenters/contractors and not believable. and the price, WOW!!! Definitely pays off to learn building something like this! I’ve been quoted $40-60k for 20x30….now may look into what you did, learn on my own! Oh, and AMAZING JOB!!! 👍🏽👍🏽👍🏽

[@alejandroperales5424]

And forgot to mention, I can watch and rewatch your video of this build and enjoy it every single time more than the last! 🙌🏽👏🏽🎉

[@NilesProductions]

@@alejandroperales5424 I find watching people build stuff is very soothing/relaxing for some weird reason as well. Who would of thought watching some guy build a shed would be so popular.

[@fakepseudonym669]

Things I'd do differently: - Roll the joists on top of girders instead of rim joists on concrete pylons - Double rim joists - Put block lines on joists for rigidity and landing plywood breaks (every 4ft.) - Use construction adhesive on the joists when putting on the subfloor, this is the number 1 reason for callbacks about squeaks in the floor, which this building will have many over time (I swear youtube doesn't know about this) - I like to use frieze (or pressure) blocks instead of hangers for joists, but that's just preference - Use 3/4" OSB tongue and groove ply for subfloor - Used California corners on framed walls - Framed the windows on the door side of the shed correctly (sill plates, trim studs and headers) - Call birds mouth by the correct name (a bird box is a much different thing in framing) - Make my rafter plumb cuts after their installation for maximum straightness of fascia - Installed bird blocking between rafters - Installed Z flashing around the entire roof before rolling the standing seam... that's gonna be an issue - Never heard about not caulking or taping the bottom flanges of windows and have lived in high precip areas, if water is getting in, you have much bigger problems than drainage - Girders/block lines/pressure blocks/double rim joist for lanai as well You asked =) Overall it looks nice and it's a shed, so it'll be fine.

[@dondieu3154]

Nice shed. I love the 'patio'. Wish I were young enough to copy this, but age as caught up with me and my abilities.

[@NilesProductions]

I don’t think that I’m that old but I sure was sore after a couple of the long days working on this project. I understand how the body begins to betray us as we age. I’m glad you enjoyed the video. Thanks for the kind words

[@kennetheady1347]

😎 you are just way cool. Thanks for the step by step for people like me. This is why I told my children get friends that can help you go places and you can help them. Too bad I don't have you as a friend. Your skills are magnificent sir 😎

[@NilesProductions]

Thanks for the kind words Kenneth 🤙 Glad you enjoyed the build

[@markf.4063]

You don't use deck screws on joist hangers. That would fail inspection in a heartbeat not mention that screws shear strength is shit compared to the proper fastener....either joist hanger nails or structural screws.

[@NilesProductions]

You are correct, I should have used structural screws instead of deck screw for the hangers. I'm not a professional carpenter and am learning as I go... Here is a good video about shear load and screws vs nails for anyone looking to learn more. kzbin.info/www/bejne/p57Em357odOqnKc

[@olybears57]

“How to build a shed for yourself….. firstly, take out a $50,000 loan….”

[@NilesProductions]

LOL, It was a little pricey as far as a DIY shed goes. All in it was a little over $12k for the shed and deck. You could make it a little more affordable by using OSB sheeting and forgoing the metal roof, and all the pressure treated lumber in the foundation and floor. Also the cedar shingles and T&G was really expensive. Had I not used premium products I probably could have saved a couple thousand dollars for sure.

[@joesmith3829]

This is beyond a do it yourself… you must be a pro.

[@NilesProductions]

I'm by no means a pro, this is my first shed build. Most of my carpentry skills come from building skateboard ramps and speaker boxes over the years lol

[@brentmoss8738]

It's amazing the different terms that are thrown around in America compared to Australia. It's really interesting to learn the different terms and techniques

[@NilesProductions]

I'm sure I used a couple wrong terms in there LOL Mumbling my way through life and not learning the proper terminology It's just the way I roll.🤣😂🤣

[@gladysprouty]

This educational video is beautiful, I am not a carpenter; but seeing you and your detailed description, make feel I can began my journey to build my shed, although I have never build one, neither know how to use the tools. Thank you

[@NilesProductions]

Thanks Gladys Prouty, I'm glad you enjoyed the build. This was the first shed I ever built. I'm no professional carpenter either. Just a guy with some cheep tools that isn't afraid to try new things. My carpentry skills come from building skateboard ramps as a kid lol. My recipe for success is: take your time, do your research, and think things through. If you know pros ask them for advice along the way and share your plans with them. Measure and make sure your math is correct on paper before you actually start cutting your lumber. At the end of the day it's just making boxes :) You can do it if you put your mind to it :)

[@farvasstache6532]

Nice job. Looks great. Dont sweat the "learning" as you go. You can always add some strength if you need to. OH... and the twangy old school country music sounded like it was straight out of the series Deadwood... awesome show.

[@NilesProductions]

Thanks for the kind words. Glad you enjoyed the build and music @farvasstache6532

[@shanevanhove8026]

Very nice! Perfect roof to collect rain water with two sideways stacked rain barrels for garden.

[@NilesProductions]

That’s a great idea 🤙

[@scottdavis3795]

This guy's shed is better built than most homes nowadays.

[@NilesProductions]

Thanks for the props Scott! Glad you liked the build. :)

[@joerigillissen9324]

In a time of lots of frustration and anger in a lot of people, it is refreshing to see such an upllifting and interesting video. I loved every single second of it. And the fuzzy foreman is the best!

[@NilesProductions]

Thanks Joeri! I agree the fuzzy foreman is the best and was the reason I actually found time to edit the video. I wanted to be able to relive watching him cruise around the yard and get up to mischief for years to come. This project was good for the soul especially with all the hardships that came with 2020 and 2021. Thanks for the kind words I do appreciate them :)

[@-krakk3rjack365]

Paw prints?? That was the signature of approval ;)

[@0-Seya-0]

That's one extremely beautiful green lush area.

[@NilesProductions]

It rains over a 100 inches a year here. Keeps things nice and green lol

[@pureformdance]

That end reveal with the fiddle music!!! Heaven!! Can you build one for me?

[@NilesProductions]

Thank Mary Ann!!! Glad you liked the build and for making it all the way to the end 🤙

[@beardbuilds5140]

Bloody hell , never built one ?!? You should be bloody proud AF of what you achieved !! Most builders should watch how you built this !!!

[@NilesProductions]

Thanks for the kind words Beard Builds!!! Glad you liked it 🤙

[@lmcgowan3]

Damn, son. Your great, great grandchildren will inhertit that shed. No harm in overbuilding, I suppose. Certainly done right and built to last. Great work.

[@NilesProductions]

Thanks Les McGowan! I hope it last for a long time. Glad you liked the build

[@flintredfeather9124]

Hello, I totally love this video. My wife and I have to move from the house we have been renting for the last three years; two weeks ago, we were given till June 1st to move out. We are researching build templates for a tiny house we will have to build. I love this video and the size of the tiny house because it will fit my wife and me. I want to say you have done an amazing job on the build; I think that we can go with the materials list, and size it is the size of a tiny house we are looking for. Both, my wife and I are college students living on the Pine Ridge Indian reservation and buying materials will be costly but I do believe we can do this. Once again, Wopila Tanka ( Native Lakota Language for " A BIG THANK YOU").

[@NilesProductions]

Thanks Flint Red Feather, I'm glad you enjoyed the video and build : ) I think with a little bit of planning, water, and power, you could totally build out a shed like mine into a cool tiny home/studio. Good luck with your build!

[@supcheema]

Really like the way that you break down the overwhelming build into discrete small steps. Really impressive.

[@NilesProductions]

Thanks Supinder Cheema! Glad you liked the video :)

[@davem16]

Doing a shed now. Was eyeing that true coat. Think I'll make it happen based on this use.

[@NilesProductions]

I'm pretty happy with it. If money was no object I think the cordless version would be pretty cool but it's a bit pricey IMHO

[@Mr-Enac]

Needs a shed. Ends up with a stunning tiny house.

[@NilesProductions]

Thanks Vincent Rodak :) Maybe someday I'll turn it into a studio. It looks nice on the outside but it's still a shed on the inside at the moment. Just some shelving and a workbench lol

[@Jack-j3l7o]

Great info, presented extraordinarily well. Beautiful result on a paradise property. You're a very fortunate man. Thanks for the inspiration.

[@NilesProductions]

Awesome! Glad you found inspiration in the video 🤙