MAX Steering Angle for MINIMUM $$$$$

Рет қаралды 11,805

Күн бұрын

This is the best low budget way to get the most out of your steering angle!
BCW Parts + Merchandise:
www.bennyscust...
Perks & Extras on our Patreon:
/ bennyscustomworks
Socials:
/ bennyscustomworks
/ bennyscustomworks
Sparesbox:
sparesbox.com....
Benny's Custom Works brings you everything automotive!
Weekly Episodes right here on KZbin, as well as the shop with new & used performance parts for most Japanese makes and models.
Benny makes this stuff look like a walk in the park. Please consider the risk factors and talk to a qualified mechanic, as well as a psychologist, if you’re thinking of attempting anything you’ve seen on the show.
Take into consideration your safety, the safety of others, as well as your vehicle’s best interests- warranty, etc.
Unless you’re trained & qualified to do so, we don’t recommend modifying your vehicle in any way. Stickers don’t add HP unless installed correctly.

Пікірлер: 73

@Sysiphos Ай бұрын

DON'T TELL ME NOT TO BE OFFENDED The show is funnier as it's looser, I like it

@PerrinYou Ай бұрын

BCW is awesome. BCW with good chats with Gian is even awesomer

@paule4204 Ай бұрын

It's like combining BCW with unicorn circle

@HL-hw6qp Ай бұрын

Giovanni is a funny bloke

@earlebird4262 Ай бұрын

Wait... In Australia you hammer with your left hand? Is that cuz of the Coreolis things too?

@BennysCustomWorks Ай бұрын

@@earlebird4262 spot on mate

@i976scirocco3 Ай бұрын

Welcome to Benny's Falcon works !

@james777cox Ай бұрын

Bottom ball joint on Falcon can be checked using a screwdriver prying between the lower arm and the knuckle. Even with full sag no need to jack up the arm. I used to do lower ball joints in car, no need to remove the lower arm. Pull the boot off and belt the body of the joint with a big hammer. You can then reinstall the new one with a big socket and a hammer or one of those ball joint big G clamps. I did once shoot a lower ball joint out when belting it and it smashed into my foot. Right behind the steel cap in my boot. Jumping around and yelling followed. Can you tell I did my time at a Ford dealership in the BA-FG era? 🤣

@ArthurCole-mn7qy Ай бұрын

Benny's in pants...Gian must have 2 parka's on.

@giangulli Ай бұрын

haha that's not far from the truth!

@Stiffkovic Ай бұрын

Been in the hospital the last 3 days and finally got something to keep me occupied. I said this last week this long form no party trick style of video is great. Feels like I’m hanging out with mates. Onya fellas

@dzitezracing Ай бұрын

Handy ball joint info there. I will check mine properly now lol

@U43A Ай бұрын

4:48 Same with the rear spericals, the lower ones need the LCA loaded in the air with a jack (on the ground ), then you put a big lever under the wheel to check for vertical movement. The top ones you just push in at the top of the wheel when the susp is fully drooped.

@Devastator0 Ай бұрын

Another Falconry episode, I click like. I'm glad that you're enjoying the Falcon so much mate, I am too! Keep up the great work!

@1jeremyneale916 Ай бұрын

I used ford Transit van rack ends

@tturi2 Ай бұрын

which transit?

@paucatuman Ай бұрын

The shorter engagement with threadlocker will give you a considerably stronger joint than the longer engagement with out threadlocker 👍 I'd suggest LOCTITE 270 and yes, Benny will be able to get that undone again if needed (you'll have to put some effort in though)

@MrGusman200 Ай бұрын

I’ve had to replace the lower ball joints several times in my old ba. Serve me right for buying cheep. I got an in car press kit for the falcon for the exact reasons you had issues getting the arm out. Still have it if you wanted it.

@darcyjane1704 Ай бұрын

Great Episode. You'll love the 4.1:1 diff! I had that ratio with a Kazz LSD in my BA ute & Manual & it was awesome to drive.

@Riley180sx Ай бұрын

4.1s so good in a 6 speed falcon!

@daviddeakin2006 Ай бұрын

Literally saw this morning a falcon Ute with its left front wheel at right angles under the guard as you showed

@notold37 Ай бұрын

We have a Territory 2005 AWD, love the car, and this series is freaking brilliant

@Stiffkovic Ай бұрын

Anyone else start yelling at Benny to cut the bolt off the cross member for the LCA haha that’s how they do it at ford dealers 😅

@jim-lj1ns Ай бұрын

Yep I did!

@HL-hw6qp Ай бұрын

VT Commodore rack ends use a sheer thread that strips as you tighten it into the rack, meaning it can’t back itself out without great effort.

@jameshusband3302 Ай бұрын

When others set the bar too high, just walk under it.

@lachlanhum5092 Ай бұрын

You can do those ball joints in the car by using your blue stand. Put it under the arm and smash the top of the threads to get it on out. Then to put it in put the stand under the ball joint and smash the arm. Works with a jack on the ground to

@papapetad Ай бұрын

I changed steering rod ends on an E46 and it had no locking mechanism...being used to seeing lock tabs on other cars, it didn't give me much confidence...so I tightened it and drove the car anyway...as you do. I'll remember the locktite trick one day when I decide to take them off again...or they fall off, whichever comes first.

@deancunningham4539 Ай бұрын

Love the content and banter Ben 😉👍👍

@tyronestock8044 Ай бұрын

That Ford FALCOON looks amazing Well Done Benny Fixing it up 👏👏👏👏

@doug-core8850 Ай бұрын

Videos like this remind me of all the work I've been putting off from when i last worked on the front end and went ah fuck thats for another day

@MrReef90 Ай бұрын

Long videos are great

@nickgrech9634 Ай бұрын

Loving this series!

@paule4204 Ай бұрын

I am no psycho proceeds to use locking multigrips 😂

@xUnholyBluntz Ай бұрын

YESSSSSS MORE FALCON CONTENT LETSSSS GOOOO PEELIN BUDDA

@WARxMACHIN3 Ай бұрын

I think the revised PS pump and spill tray was learnt from the intech which leaked horrendously and had no spill tray on base models both directly onto the alternator

@DailyBadDecisions Ай бұрын

Don’t have to press lower ball joint. If you have a hammer and a block of timber you can remove it with one hit.

@TimMoore-gv7hu Ай бұрын

in regards to keeping the stock power steering pump alive, apparently Luke fink swears by under drive pulley kits as that's what he's done with his falcon in japan. personally, I'm not too sure how effective they are as I've never used one before, I'm still using the stock setup. Keep up the good work though 👍

@BennysCustomWorks Ай бұрын

@@TimMoore-gv7hu thanks mate, yes an under drive pulley is on the list for sure

@tturi2 Ай бұрын

@@BennysCustomWorks can you just underdrive the power steering and not the whole lot?

@AmirPomen Ай бұрын

@@BennysCustomWorksUnderdrive is good option.. But i would prefer eletro-hydraulic pump swap (with bigger ampere alternator) This will free up belt drive losses (although alternator will take up abit more)... Atleast when belt is gone mid drift, the eps will still work on battery power..ensuring safe way to control the car to stop..

@MichaelSmith-pd5pt Ай бұрын

Maybe nolathene provide them per side as Gian may need the side he used to door you replaced.

@grantferguson1416 Ай бұрын

get a g&g press for the joints... will probs pay for itself with the amount of falcons you work on now, beats removing the arms

@chriswrx94 Ай бұрын

Bought one off an ebay auction years ago for $60. Haven't owned a falcon in years but it's one tool I always keep in my toolbox. Makes ball joints so easy to do and with your brain can use it for multiple other jobs

@firefighter_dj Ай бұрын

Ball joint press kit from supercheap. Saves fkn hours. Take the upright and shock off and plenty of room to use the tool both ways

@tturi2 Ай бұрын

im messing with mine while you are on in the background messing with yours, falcon I mean

@MrEgghead1999 Ай бұрын

Used your Sparesbox code. Thanks for the discount

@aSinisterKiid Ай бұрын

3 Newton meters is like the equivalent of a half and ugga dugga

@BennysCustomWorks Ай бұрын

@@aSinisterKiid it’s not even an ug.

@caynnfittler1628 Ай бұрын

Stock/NASCAR style racing needs camber on one side and tie on the other type of shit 🤷🏽🤷🏽 maybe that why they sell one and not a set

@wallafied Ай бұрын

Ba xr has a smiley mouth look and bf xr has a frowney mouth look. That’s the biggest difference and the frowney looks way better

@cracklingice 28 күн бұрын

Put it into the wall once or twice and I'm sure you'll be down for the per side situation.

@ChristopherHallett Ай бұрын

Yeah bro, do uppers. Wait, what did YOU mean?

@S1KRR-l5v Ай бұрын

Can you ask the aligner if you can get a video or share the specs?

@BennysCustomWorks Ай бұрын

@@S1KRR-l5v will do mate

@ChristopherHallett Ай бұрын

Standard engineering procedure is 1.5x thread diameter in engagement. Very strange that Ford went with 0.9 from the factory like that. I get it's a fine thread but c'mon Ford, do it right you pricks.

@BennysCustomWorks Ай бұрын

@@ChristopherHallett I was pretty shocked too.