Maytag Washing Machine Reset, Diagnostic Mode & Error Code Guide

[@Onemattressatatime]

Been in the appliance service business 32 years. Love Your videos. Man, you are killing it for a job.

[@bensappliancesandjunk]

Thanks! We're getting a new shop soon so I can get my hands on some newer stuff to test and tear down like the GE WD Combo w/ heat pump. Also got a GE SmartHQ to test on it too!

[@justinjones6810]

​​​@@bensappliancesandjunklooking forward to it hope you can get the all in one whirlpool too

[@Kam-p8f]

help them...please ...no codes just my knob won't work

[@Kam-p8f]

help them...please ...no codes just my knob won't work

[@Onemattressatatime]

@@Kam-p8f unplug live unplugged for one hour . User interface pull the knob off put back on.

[@solidrock6524]

I used one of your old videos to get a dryer going , an old Frigidaire. As soon as you used the phrase "a criminal amount of lint" I hit subscribe... my wife is a nonbeliever of the correlation between a dryer working and a clean dryer

[@jonboy545]

Really appreciate helping others repair their own stuff and supply the information needed for these new advanced models. Many thanks, subscribed!

[@LynnSJ]

Purchased this washer/dryer less than 6 months ago.. washer would not leave sensing mode, error said clothes detected during afresh cleaning cycle. And washer screen stuck on clean washer reminder.. unplugged, turned on off turned to different cycles. Enter sending then said finished, turned off. With the help of this video…!!! I did a factory reset.. and. WALA! Selected language and away we go! Seems our stinky xfinity internet has been wonky all day causing problems w washer computer, and controlling via app. T goodness for this video just saved us from calling Maytag and a service call to have them do a factory reset!

[@LynnSJ]

Will not connect washer to WiFi or App for a bit. Internet connection is still spotty

[@kennethfoley3536]

We have one of these. Always thought you couldn’t go wrong with a maytag. Boy was I wrong. Absolute garbage!

[@BoeingAviation737.]

I have that washer, its sucks

[@VideoWorld99]

It does, we call it The Knot Master 1000

[@feliciastrange3328]

Yes!!! 1000%!!! And what’s worse is trying to get the technicians to fix it! The warranty company is awful! The whole reason to buy the warranty was so I didn’t have to fix it myself!!! I will never buy another one and I will never own another Maytag!!!

[@MarioMan-iw7xl]

I have this washer …bought new in February. Tore up on July 4th…took 55 days to fix. Tore up again and now Maytag says gotta go to “product review board” to find a resolution. The repairman said they would replace it. Company is absolute joke.

[@DanielHoover-tt3yv]

I have this washer. It will not work right

[@angelawillis6215]

I'm disappointed with this washer too. It's horrible.

[@chintanshah18]

Great Video! Thanks for sharing. I was quoted $500 to repair this junk! The new one costs $700

[@ThePhilipJFry__]

Beautiful. Just beautiful. Your videos have saved me hundreds of dollars.

[@bensappliancesandjunk]

Wonderful!

[@ernelmontgomery34]

I’ve had this washer 2 years. Today it’s not powering on and can’t get my wash out of the drum as lid won’t open. Any help?

[@joseplascencia9546]

I'm here for the same reason. Mine just did the exact same thing. Hopefully we can get some help from the comments.

[@mazensubhi4621]

On behalf of my daughter, I wanna say thank for your help we managed to get school clothes ready.

[@katiesers6007]

Just a single momma trying to get the load to wash 😂 ty kindly!!

[@bensappliancesandjunk]

Hope it helped!

[@marykoharchick1485]

Same my friend! I’m about to attempt to figure it out too!

[@Sparky-413]

Had an over flow event in this same washer . Like 20 gallons of water in the machine , spilling onto the floor. It kept tripping the gfci so I had to vacuum it out with my shop vac . Tool back panel off . Everything was dry . Plugged it back in worked fine . Next day it won’t fill.

[@debraglenn3611]

Thanks for this helpful video. My question how do I get my machine out of soaking mode?

[@jasontilley2979]

My washer is the same one you are showing in the video. It will not hold water it continues to try to wash with no water. What do i do to fix that? Thank you

[@ashleytaylor2309]

I have this washer. Mine stopped mid cleaning cycle and now won't power on. So hopefully this video will help me.

[@stripedrajang3571]

Did it help?

[@clitt4730]

Mid cycle, mine like this lost the main control board when that happened

[@user-hc3vk9lo1s]

Where can I find instructions for this thing. I can’t make it stop and soak. When if stops due to an unbalanced load, it starts over. No way to get it to just spin after a rebalancing load. It also chewed holes in two clothing items.

[@marykoharchick1485]

I have this washer, and it is leaking at the bottom. I’m going to try going through the diagnostic process and see if that sheds any light. The idea of “fixing” this is very intimidating

[@CarlaDarnell-e4l]

My washer which is the model in this video keeps showing close lid. I run through all these codes and it gives me no error code but the lid won’t lock and keeps saying close lid. I even bought a new hinge to replace it but still same thing”close lid” please help!!!

[@demasjuarez9932]

I just replaced the clutch now it only fills up with water, do I have to reset the machine? Or recalibrate?

[@Shaggasaurus_rex]

Can you provide a link to where you get the list of error codes and what tests to perform that you showed in the video?

[@a.a.4924]

This is the worst washing machine I’ve ever had

[@krakenhits1587]

I have this exact washer and I'm getting an f3 e2 I'm just wondering where that pressure hose is I've got the back off is there a clear line next to the electrical line leading to the drum?

[@franpost9800]

My Maytag washing machine and dryer have so far lasted 26+ years.

[@aaronmacy9134]

If it ever breaks, have it fixed! Don’t do what we did and buy one of these new machines. Ours is 2 years old and I’m here to learn how to take it apart to fix it myself because it’s direct drive electric motor is already having problems and nobody can get to it *FOR SIX WEEKS.*

[@denniswier5627]

Ihad a big old Commercial pre millennium model. Needed a fill sensor I believe. Really wish I wouldn't have scrapped it. This one...JUNK

[@protanto2794]

@@aaronmacy9134I agree with you 100%. Things produced recently suck - and this applies to every item of any field.Karl Marx predicted this happening over 150 years ago.

[@schneiderm94]

When I go into the diagnostic mode it won’t run the diagnostic cycle or the factory cycle. Any ideas?

[@JeffConachen]

Hey Ben. Love your videos. I have a a Maytag washer with this display and I have an F7E1 code. I replaced the tachometer (actuator) and the cam it connects to. I still have the same issue. Any ideas?

[@melissaanne2023]

Mine is giving this now.

[@Cyberglyph]

too bad there is not a way to change the value for the clean cycle. Increase it to 40 instead of 30. great video saving this one for sure!

[@bensappliancesandjunk]

That would be a good one. These companies really need truly cusomizable cycles that let you pick eeeeeeeeeeverything via an app.

[@matildamastiff8667]

What if my f2e2 code won't go away, even after I kept it unplugged and replugged it back in?

[@SuperMaximus45]

I have a dryer with that interface. Every time I flip my breaker to do work around the house I have to call a service tech to restart it. How can do you restart it your self ? Please help

[@Turbomontess]

I have this washer and lts sensing and no water fill then says washing complete and like drains. Ive order a part w10754448 replaced it. And still doing same thing. Any help? Thanks in advance

[@Insurancequote-nz8ix]

Same washer! Keeps showing ‘please rotate then know to an available cycle’ knob rotated nothing changed. Power disconnected for 24hours still not working. Factory reset not working.

[@Kam-p8f]

Same ..have you fixed it! Help

[@Insurancequote-nz8ix]

It’s covered by warranty. Waiting part for replacing panel.

[@Kam-p8f]

I purchased mine from someone off of Facebook...no warranty 😭

[@Insurancequote-nz8ix]

@@Kam-p8f Better buy from Costco with extra 1year warranty.

[@gabecraver4807]

Checked washer it was off the washer is still full of water and locked and won’t power on. Do you have any ideas of what might be the issue. Would appreciate any help. I unplugged and plugged a fan in so it’s not the outlet. Thank you for your time, god bless you for your helpful videos

[@hector64259]

I have the same exact issue right now

[@atinwoodsman]

My Maytag dryer has lost audio, everything else seems to work. How can I perform a factory reset?

[@izzyrehrauer6233]

This is my exact machine and this is a very helpful video if it applied, but what about when there is zero power. The outlet is good, tried every reset possible on the machine (mentioned here and other videos) and nothing happens. I can't access this mode because the panel won't activate at all. Any advice at this point? I think it needs a new control panel and it's stuck on Lock because it died mid-cycle. Any other help available?

[@bensappliancesandjunk]

Check for green flashing light on the control board itself. If no light = board or wiring to board is bad. If green light = check for VDC going to UI

[@izzyrehrauer6233]

@@bensappliancesandjunk Thank you for the reply. We opened the top panel and looking at the Control Panel there is no green flashing light. Going to order a new CP and attempt a replacement. Maytag should rethink where they place their model and serial number sticker for the cases where the lid gets locked and you cannot access it!

[@pattiadamson1607]

I have a similar model that died mid cycle 2 weeks ago. Got a new control panel installed it and smoke from back when ran test cycle. Repairman today drain pump short which killed the new control panel. He had a used one for free, new drain pump but even still all together cost me $475. If it dies again I will get anything but and extended warranty.

[@christopherturner9123]

Hey Ben the slot where the bleach goes...the bleach is just standing as if its clogged? What do i do? The bleach wont drain

[@jetterbetters1985]

I actually love this washer and this video helped me SOOO MUCH. Thank you!!!

[@damianflores8302]

Could i use the diagnostic cycle immediately or do i have to have tools on the side to prepare it something goes wrong?

[@michelleleonard1843]

what does F3 F2 on that same exact washing machine mean?and how can I fix it?

[@melquesedekcastro7480]

It is related to water pressure sensor, could be the hose that is not connected properly or it has a hole, or you have a defective board.

[@new_hampshire]

My washer just like this, after I did a small load, just gave me the flashing colon w/zeros and I had to unplug to clear it. Does this mean trouble is coming?

[@ngoiloi9174]

Hi Ben, I have liked and subscribed your channel because your video is very helpful. My Maytag washer is MHWE201YW00, everything works fine, but it skips spinning to extract the water out of the wet clothes. To spin the drum, I wait until the washing cycle finishes then select the spin function only to spin and extract the water. I unplugged the power many times but no luck. Can you show me how to run the diagnostics so I can find out what prevents it from spinning for this specific model. Right now there is no code. Thank you.

[@bensappliancesandjunk]

That unit is quite old. I dont have any diagnostic videos for it and Im not sure if they can do diagnostics.

[@shewho333]

This washer is awful. If you have a choice, don’t buy it. You can’t just set a load for how you want it and go do other chores. You have to stand and babysit the machine for over an hour while it “senses” and doesn’t fill and fills partially with the wrong temperatures, and tries to agitate with no water and has no rinse cycle except a couple of spritzes of water during the spin. Doesn’t fill all the way and then instead of agitating, it dumps water all over the floor. It’s terrible. Garbage. Complete garbage.

[@protanto2794]

Agree. I biggest piece of junk ever. In normal world, the company that would br selling such junks would be required to refund the entire amount to the customers and pay extra for damages. In this crazy world, however, the blame is shifted on buyers while the owners of the company make millions and they ate not worrying about facing any consequences.

[@renerodriguez6300]

At if you run all diagnostics all test and it then says at the end wash end.

[@ps6474]

Great video and helpful advice. I recently purchased this exact Maytag washer, it's working fine, but two things...First, for the last few loads I've washed when a load finishes, the washer automatically turns off, is that normal? And what should the washer say when a load is finished?

[@emmathenia1495]

It is normal for that to happen. It turns off after about 5 minutes. When the cycle ends it says " Washing complete".

[@ps6474]

@@emmathenia1495 Oh Ok, well glad I now know. Thank You for the reply, I was about to sign off for the night and saw your reply right before. Anyway, may you have a good evening.

[@wadederrick]

I have this washer and the lid wont close flat. I have to hold it down to start wash cycle. How can I get the lid to lay flat like normal?

[@1GrandmaFeeBee]

My washer showing code F0E9. Can I reset or fix myself without having to call out a service tech?

[@bgetz1513]

I keep getting the F0E7 error code when trying to run the clean cycle. Seems simple take clothes out of washer. Only thing no clothes in washer. Thoughts?? Any help much appreciated.

[@GenXMafia]

I get the same thing this washing machine is the biggest piece of shit I ever owned in my life

[@lennimation231]

Thank you. Very informative.

[@morenitaramirez611]

My washer keeps saying F7E3 this is the 2nd time in four years and now it don’t want to work. What should I do pay 500 to fix again

[@cliffordlopez2083]

What if its "stuck on please turn knob to select cycle" but i turn the knob and it doesnt work

[@eyesopen6110]

How about for the equivalent dryer?

[@jb122761]

Is there a way to cancel the cleaning cycle?

[@mariomillan9613]

What do you have on the MVW6200KW0 won't shut off power at the control panel, and will not complete the cycle and lock the door.

[@heathertee3362]

Have a Maytag MVW6230HC that if there is anything more than half a load and it’s on Normal/bulky/heavy it just continues to “sensor” while trying to rinse. The load will be soaked and it will be a chore to get it to spin out. Sometimes you can put it on quick wash and it will run through. I ran the diagnostic and there were no fault errors listed. I also did the diagnostic cycle and nothing came up. The barrel when washing looking a loose and I don’t know if the barrels are meant to be super loose. Could that be a reason for the sensor issue? Great video by the way, it’s very helpful and informative!

[@bensappliancesandjunk]

Hi, yes, a loose drum could cause that. Usually if there's a mechanical fault, codes aren't going to show up because there isn't a sensor alloted to the issue. I'd check the tub nut in the drum for possible issues. Additionally, I have a video about the sliders underneath the Direct Drive styles, those can cause a ton of problems.

[@lindabennison4167]

We need a recall

[@kevindeluca1]

Great video! Thank you very much. My whole unit control panel appears to not have any power (even after attempting to unplug/replay and service tech mode). Any tips for opening the lid if it’s closed shut?

[@bensappliancesandjunk]

Watch my video on how to open the top of the lid up from the chassie. That's the only way you're going to do it to bypass the leadlock without causing any damage.

[@CharlieLucas-b6d]

My washer is currently show “F2E2 Contact service” it won’t even let me enter the diagnostics mode

[@mrld3005]

I hate this washer is there any way to remove sensing? and just make it wash with lots of water always?

[@daveanderson2833]

I have been leaving it on colored clothes and setting it to Max Fill....it's the only way the clothes come clean. Id love to throw this machine through Maytag's Corporate office front window..

[@mrld3005]

@@daveanderson2833 will try it thanks, there should be a hack just to make the sensing sensor think all the time there are tons of clothes, I bought this stupid machine thinking it was better than my old GE worst mistake ever....

[@alexandriav3956]

@@mrld3005this washer is actual garbage. I hate it so much. I have the faucet in my washer so I’ll turn that on when I load the clothes, make sure they’re all wet, then turn the washer off so it drains. I then run a wash cycle so it maybe thinks the clothes are heavier than they are. No idea if it’s even worth doing.

[@mrld3005]

@@alexandriav3956 I just discovered that putting them on bulky fills the whole thing but takes more than an hour !

[@sagiebbii1850]

Mine doesn’t display anything what can I do? It turns on but can’t see anything on it

[@dougpedersen3733]

yes, Maytag is garbage, washer & dryer both had major issues within 2 years. Cheaply built with very expensive to repair.

[@KolbyStelly-i9g]

Hey man you helped me fixing a washer with a different video I figured to get a response I’d come to a new video. You saved me a lot of time and money I’d like to make make a donation if possible please let me know how I could.

[@krakenhits1587]

Just wondering how I run the test six I'm getting the f3 e2 code think it says that's the pressure hose fault

[@ernestgarza4133]

Would this apply for model number MVW7230HW0 Thanks Ben

[@mikesocash7140]

Ben, i have this same washer, and i get no power to the touch screen. I have 120 to it, but Nothing there, so i cant get into diagnostic mode. Would you assume touch screen bad?

[@bensappliancesandjunk]

Could be. I'd check the control board. It should have a flashing green light on the board if the board has power and is running. If it has the green light, then its the UI. If it doesn't, its the board.

[@rudy2ndjr]

Hi. I have this same washer i had this error before once and i hars reset and worked fine. The error came when new. F7E4. It stoped working. Its sensing and no water fill. Thwn stops washing complete and like drains. Ive order a part w10754448 replaced it. And still doing same thing. Any help? Thanks in advance.

[@Cruising200]

Same problem here, any luck?

[@rudy2ndjr]

@@Cruising200 no unfortunately not yet, i just purchased a new one.

[@Cruising200]

@@rudy2ndjr ok thanks

[@morenitaramirez611]

I have the same problem this is the 2nd time I fix it and it’s the same thing 😢I’m giving up it’s only 4 years old

[@белаяполоса-й7я]

Really helpful video 👍👍

[@bhavanisukhdeo7548]

Just got this washer had 30 day warranty.. my machine messed up 60 days later its not powrring on😢

[@leepope171]

I have tried the DMLS calibration and it does not go past cycle/Spinning. What are my options?

[@bensappliancesandjunk]

Did you check or find error codes?

[@ROsieG12]

My washer won’t turn on, is locked and has clothes inside. the power is on because the dryer is working just fine. Please help. What do I do next?

[@melquesedekcastro7480]

Is your dryer a gas dryer? because if ti is electric it does use 240V and not 120V. The first thing is to disconnect power for about one minute and reconnect power. If that doesn't solve the problem. You could have a latch mechanism, water pump or even the main board.

[@michellebarrett4767]

F6E3 code can u help .

[@alongley3825]

I have just purchased this washer and it’s a large capacity washer but I’ve never seen more than 6 inches of water? Am I doing something wrong?

[@daveanderson2833]

Need to put it on MAX FILL. Otherwise it will only add water based on the weight of the clothes you put in. These machines are absolutely the worst.

[@alexandriav3956]

Can confirm! This washer is garbage. I have to make sure all my clothes are wet before I begin a cycle so it will add more water because it thinks the load is heavier than it is.

[@daveanderson2833]

​​@@alexandriav3956just leave it on Colored clothes and set water level to "Max Fill" and you will only have to adjust your water temp and wash time...

[@РинокРибалки]

Hi, please tell me what I need to do with f3e3 ? Thank you for your video!

[@lindabennison4167]

Did you get a answer. How do you know

[@lindabennison4167]

Ben way wont it fill .l bought this new .l have try all setting to get the right way l wont it to work for me .what it does does .is turn on heavy washer .water comes on but cant see any water then it starts to beat the close with out any water . .can the custom mode video .will it let the machine fill with water before washing .please get back to me.

[@lindabennison4167]

Yes mine does the same .l hate the washer .there should be a recall on them

[@Zanenoth]

Lol who needs a video on thr UI with a screen?

[@verogl484]

Code F8E1 what needs to do ?

[@Ray-___o]

I need help with this error, you have a solution bro?

[@Condor1970]

I have the Maytag MVW6230HC0 model control board. Can I use any of the alternates from Whirlpool? The one online seller lists it very expensive, yet it looks the same as the ones for Whirlpool. The board locked up and has a little heart symbol on the screen.

[@domingamckinney-cofield1456]

Did u ever get it fixed. If so, what did u do?

[@Condor1970]

@@domingamckinney-cofield1456 ...Yes, I tried an alternate off Amazon that turned out to be slightly different, and so the cheaper alternate didn't work. I went on Ebay, and bought a used board with the exact original model number, taken from a recycled unit (but had a 90 warranty). It was a little more expensive... about $100. But it works perfectly now.

[@ebonymangwiro633]

I purchased this washer in the Summer of 2020. Within the first year we had to replace the display panel. Nearly 4 years later we had to replace the ACU. Now that it has been replaced, the machine gets stuck on the spin cycle. When I do laundry, I have to turn off the machine and use the Drain/Spin feature to complete the cycle. We have called Whirlpool about the issue, and they thought the system needed a software update. It shows that there are no updates needed at this time, but it still gets stuck on the spin cycle. They have sent out a tech twice, but nothing seems to work. We have been dealing with this for nearly a month with no resolve. I'm ready to give up and purchase a new washer. I am now questioning my faith in the Whirlpool/Maytag brand.

[@bensappliancesandjunk]

My impression is that this washer is becoming the most hated one on the market by techs

[@daveanderson2833]

This washer is definitely the worst. I've never in my life purchased a larger piece of junk.

[@steveyek627]

Consumers also​@@bensappliancesandjunk

[@FDCGaming2010]

hey man you should make a video about what happens if the fridge and freezer temperatures are to cold and to high.

[@bensappliancesandjunk]

I'm not sure what you are wanting exactly? That will vary by model

[@FDCGaming2010]

@@bensappliancesandjunk mabye just a bone basic frigadaire fridge because thats what i have and also mine is from 2006 so if you want i can tell you the model

[@JC-hl7nx]

Mine keeps turning off saying cycle complete. Literally wont kick over. What do i do?

[@KeishaLewis-38]

Same. What did you do to fix it?

[@JoJoB.1324]

I need help but with my dryer.. any videos on that?

[@bensappliancesandjunk]

Not on this style yet sadly

[@karinacaraveo3716]

Hi. Where can I download the error code list? The error code F7E4 was cut off in the middle on the video. Thank you!

[@wylykyotys]

F7E4 = motor drive module over voltage from the sheet inside my washer. I can't help you further on that.

[@user-yn7sr2qf9e]

Mine will sense for washing then go straight to wash complete and hasn’t done a thing I’ve done a factory reset and cleared any error codes… what else can I do???

[@KeishaLewis-38]

Mine too. What did you do to fix it?

[@victorialopez3691]

@@KeishaLewis-38mine too!!! How did you guys fix it?

[@wylykyotys]

I have a code F2E1 stuck button. What needs to be replaced?

[@melquesedekcastro7480]

Try to disconnect the user interface from the main controller and then reconnect them it if works it is ok. Or the user interface needs to be replaced.

[@shaiware4450]

On my Maytag model MVW7230HWO washer I changed the motherboard and now I have a code F2E2 displayed and nothing I do removes it from the screen I tried unplugging it for 1 minute The machine has down for about 3week while waiting on the new motherboard so how do I reset the machine so I can use it

[@bossalba612]

I’m literally having the same problem. What’d you do?

[@dopeFr3shinc]

Factory reset it

[@DarleneKirkpatrick]

Your right the magtag commerical technology sucks I have one I would not recommend to anyone

[@pameliahagerhager4089]

Do not buy this washer unless you want clothes that are worn out and not clean. Wish I had never bought it.

[@billrobinson9308]

Great except codes will lock out the touch screen …. No access to diagnostics

[@masont8829]

do anyone know where i can get these manuals he is talking about

[@stephanyandres5968]

There is a diagnostic code manual hiding in the plastic pocket inside the front panel of your washer. There might be another one on the back of the washer. It's crazy.

[@patthemaniacful]

Thank you

[@olddave4833]

we have this washer, it is the worst thing we bought in over 60 years., we basically got stuck with it do to covid when a few people got sick and everyone turned crooked

[@chintanshah18]

Thanks!

[@crazee6821]

This will not work if your screen says “ power failure E2F2

[@bensappliancesandjunk]

Should be able to press the start or power button and off to reset that error assuming it was suddenly unpligged

[@mikeseng4953]

thank you man i know how to do it keep some update there some rumor on maytag because ge got the all in one washer and dryer combo will see what happen

[@bensappliancesandjunk]

If they make one ill buy and review. I will have the review for the GE this week.

[@Jeffrey-h8g]

Bought a new massage washer it will not even start to try it out

[@jeffrobodine8579]

I bought a Maytag dishwasher a few years back that barely lasted a year. For some stupid reason I bought a Maytag over the range microwave that konked out in about one year. At this point you could not give me a Maytag product, absolute junk.

[@StormSongs7]

We had a Maytag fridge and washer when I was a kid. The fridge lasted around 25/30 years and was replaced because we wanted something more modern looking. The old one was moved to our cellar. The washer lasted a good 20/25 and was replaced simply because it was worn out. Doing family laundry and sets of sheets at least 3x does that, I guess. The quality has seriously gone down…😢

[@woodrowwilliams1812]

I still have a Maytag refrigerator bought new 25 years ago. I’ve replaced door gasket and defrost heater element.

[@StormSongs7]

@@woodrowwilliams1812 They don’t build them to last the way used to. Its gone to quantity over quality now.

[@nathanriddle3368]

@@StormSongs7 on purpose/ buy parts or buy another not 25 yrs, cant make money like that

[@dougpedersen3733]

I’d like to give Maytag an FU code!!!

[@Freminet_offical2000]

My Maytag keeps saying “maytag washer message please rotate knob to an available cycle” and i can’t figure out why! Someone help lol

[@Kam-p8f]

Same did you fix it?! It was fine earlier this morning and all of a sudden NOTHING

[@velmapainter1196]

My washer dances around when spinning😅

[@dianewhite330]

I have that same washer. Its the worst one i ever bought by far.

[@JC-qg4sh]

This is a total shit wagon, mine is 6 months old won’t agitate completely garbage! Under warranty back and forth with parts twice now parts are on back order at least 2 weeks! Isn’t this consumer fraud?? Maybe dragging their ass into court is in order. Whirlpool (maytag) has gone totally to junk, wish i knew this before i put this trash in my house!

[@KayBee-m5q]

I agree horrible washer @maytag

[@oneeyedjack8806]

I am spend $2000 on a washer. AND IT WON'T BE A POS MAYTAG!!!!!!!🤮