Bernette Winding Thread / Threading & Test Sewing / Bernette 330 / Bernette 320 Sewing Machine

[@gudruncrittendon6070]

Thank you so much for this video! I own this machine but have notbeen able to use it for a long time due to something stuck somewhere. Your video helped refresh my memory as to its general functions once again. I have always loved this machine for its simple design and reliability.

[@MasinskiKutak]

Is your sewing machine still malfunctioning?

[@gudruncrittendon6070]

@@MasinskiKutak unfortunately yes. I have had health issues and cannot walk at he moment, so have not been able to try to clean it out properly. I am having trouble with thread getting stuck somewhere while sewing and then it just tears the thread and the machine stops. It’s also difficult finding a service nearby that could help me with it. I appreciate your asking about it. Thank you!

[@MasinskiKutak]

OK, still you turn more to your treatment, get well soon and good luck 🤗

[@coreilly008]

I found one of these at the weekend and the only thing wrong with it is the stitch length dial is a bit stiff but thinking this is probably because it hasn't been used for ever. Looks like it has been stored away. Definitely feels a little easier as I use it but still bit hard on my wrists!

[@MasinskiKutak]

It seems that this is their shortcoming, with this example in the video clip, the upper button of the programmer was very stiff, I remember that I had a hard time fixing that problem. Try to lubricate the inside and outside with a slight heating, the best option would be the complete construction of the button, detailed cleaning of the bearing and lubrication, now I don't know how ready you are for that, maybe it's a job for a good technician.

[@agardmelanie3509]

hello, could you tell me what is the motor of this sewing machine. And also if it is efficient and if it passes the layers well when sewing?

[@MasinskiKutak]

As with most home sewing machines, the motor is nothing special, I don't know the exact power, it is usually around 75-80W. Sewing machines that have electronics usually have a stronger needle penetration. I haven't tested how it goes sewing over multiple layers of fabric.

[@happilyeveramber1119]

My feed dogs seem to be stuck in a lowered position. Do you know how to fix this on this model?.

[@MasinskiKutak]

Of course I know how to fix it, but it's very difficult to describe in words and I need an accurate insight into the state of the sewing machine.? There are two possible situations for you. first maybe the feed dog is turned off, I can't remember where and how it turns off, look for the user manual on the Internet, the second situation is a mechanical failure, and the feed dog has failed, in that case you will have to visit the first service for sewing machines.

[@merciaforbes6300]

My sewing machine s motor is running but the needle not running up and down

[@MasinskiKutak]

Is your sewing machine a Bernette 330 or another model?

[@ياسر-م2ض4ر]

المنشء

[@MasinskiKutak]

خبير