Best AGF RC Servos tested - 66kg, 23kg fast, low profile, 12v 50kg servos all measured

[@shadow7796]

Very nice numbers. I've got a Reefs 777 on 3s direct power and have no complaints. They're an AGF servo.

[@gucciskunkit]

Great review, even better servos. i use the 55kg in my k6s. What a monster!

[@RCReviewChannel]

The 55kg from AGF is so good. It's just like the 66kg and it delivers the promised goods.

[@beesod6412]

holycrap, how have I never seen these before? Thank you! RTRs I always have the worst luck of the servos getting the shakes after a month or two of light bashing. So now I replace them right out of the box.

[@RCReviewChannel]

Yeah, RTR will usually get you ready to run the store to get a real servo.

[@DeRock401]

I use the agfrc 32kg in all my rcs. Love them

[@scottoblander9419]

I’ve been using the A73CHLW in a rock crawler and have been happy with it. Only $60

[@shadow7037932]

That AGF Low Profile seems perfect for some Tamiya kits.

[@RCReviewChannel]

For sure. Any tight application with scale cars or ones with an interior require a shorty servo. We tried MKS low profile servos too but they are pretty weak.

[@llorulez]

great review those seem a good quality servos

[@RCReviewChannel]

Thank you. The results surprised us as most servos at Amazon over-inflate their torque claims.

[@llorulez]

@@RCReviewChannel What is your opinion of JX servos?

[@billielynnross9771]

FYI, most of their programmable servos do not come set to full power and they have safety cutoff values that heat affects.

[@RCReviewChannel]

great advice.

[@dadsrcworkbench1322]

I have a few AGFrc 45kg in my crawlers and they are rock solid. For performance , price and I can get them on Amazon . Winner winner chicken dinner !

[@robertflower3226]

Hey Guy, I think the torque should be higher than this test, i saw their video before to measure the stall torque should be fixed firmly for the test stand. I saw the metal part with screw lock is too loose, so the torque should goes higher than these.

[@galactusgalan4233]

Why did the first two servos get a pass? Their torque was rated 50% and 70% more than the actual values?

[@mojaverc1585]

I got the 55kg one for my capra. I like how it has the programming usb

[@JohnSmith-lk8me]

Can you review this one A280BVSW I'm having a hard time finding a good 1/5 servo for my Kraton exb. Any recommendations from anyone would be helpful. I have a 4pm radio. Reefs Beast 1000 won't fit.

[@MrBoomtheroom]

who do they supply servose to in the states? protek rebranded?

[@patrickturri]

I need some new servos for my 1/8 scale nitro truggy and electric truggys. What models AGF servos would you recommend. Thanks for the video!

[@pisaitsun]

Is the servo black wire the same line? While rx and tx can manage Volt lower than servo.

[@290DIRT]

Please test 9imod servo 35kg and 45kg 🙏

[@theirishaxe9405]

Will you try some power hobby servos please. I have a powerhobby 190mg in my kraton on 8v and it works great it's a 30 dollar servo claims over 500oz/in. I doubt it's that high but i like it.

[@RCReviewChannel]

I measured those before and they came out at about 70% of what they claim. So definitely false claims but for the price still strong and a good value

[@damaylaphoenix1155]

what companies does agf make servos for?

[@robertflower3226]

Why the test current is much lower than what AGF declared? I saw A81BHPW on the link, the current can go to 4.6A at 8.4V and torque up to 320oz. Which is correct?

[@miasam9666]

why ounce not KG? The rating of the servo is in KG

[@simonanderson3961]

Hmmm so low profile says 35kg but it's actually 20kg. The 23kg is actually 14kg... What's up with that??? Are all servos over rated like that? I want to replace my Maxx servo... The 2090 is rated at 20kg... Is thinking of getting a 35kg agf but if it's only actually 20kg then why bother? I don't get why you say "they're not lieing" when you have demonstrated that they're lieing?

[@xxlilstevexx420]

Can you test OMG servos next please?

[@RCReviewChannel]

That's a real thing?

[@mickd8188]

I think you'll find that they are AGF servo's. Many companies get them painted to their company or brand logos

[@beesod6412]

Have you done a under $100 bashing radio recommendation or reviews? I'm looking to get one that I can use with all my 1/10 bashing rigs. Thanks!

[@RCReviewChannel]

Right here: kzbin.info/www/bejne/bojbi5Vsq7GXj6s

[@stevestonrcguy5393]

The SA86 sounds like a good choice for my Traxxas UDR,🤔 What are your thoughts, I guess I would have to buy a BEC as well???

[@RCReviewChannel]

Yes, that would be ideal. A BEC is not required but to get the most out of the servo requires a configurable BEC that can go to 12.6v

[@Aykutreyes]

It sounds like what you're saying is AGFRC has used plans and designs that were entrusted to them and misused intellectual property to sell as their own product. If I did not understand the statement correctly please correct me. 5:17

[@mastodonseven]

No AGF do the designing

[@jookya2]

you think reefs is out there doing a bunch of electrical and mechanical engineering? Nah they're just youre typical "buy USA pride" rebranding of a chinese product with an american markup. Some dudes get rich doing minimal work business...

[@NepDouble07]

The ratings on their low profile servos are extremely disappointing. A lot of their standard size servos are usually underrated... I would like to see them plugged into the programmer to see if their lower profile ones are neutered out of the box for heat reasons...

[@loranzobaker7293]

Wow didn’t know they made servos for Reefs, i have 2 triple 7s. I would be better off buying direct from them, and not dealing with Reefs markup.

[@davidgt754]

When you invite me, I have my xmaxx updated and unused for 1 year

[@NCmountainsYouTubeChannel]

💯👌👉👍👍

[@richardcranium5393]

Savox sucks for twitchy servos js