Best AIO (All in one) Car Polish - (Traditional) HD 3D Speed vs Menzerna 3in1 vs Rupes Uno Protect!

​‪@CarCraftAutoDetailing‬ 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoff...
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com...
Products used in video: (some items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
HD Speed: amzn.to/3ClzSYL
Menzerna 3in1: amzn.to/3rJNSqk
Rupes Uno Protect: amzn.to/3elXwMD
Microfibre Towels For Sealants/Compounds:
Car Paint Markers: amzn.to/3fx13rB
Car Polisher Used: amzn.to/3RThn3s
Detailing Inspection Light: amzn.to/3rHWoWF
Detailing Shop/Mobile Lights: amzn.to/3MktbdY
Hose Multi-pattern Sprayer: amzn.to/3emxTv
🇦🇺 Australia Links:
HD Speed: amzn.to/3CHYuw8
Menzerna 3in1: amzn.to/3SR1r39
Rupes Uno Protect: www.waxit.com....
Microfibre Towels For Sealants/Compounds: www.waxit.com....
Car Paint Markers: amzn.to/3fIavZr
Car Polisher Used: www.waxit.com....
Detailing Inspection Light: www.waxit.com....
Detailing Shop/Mobile Lights: www.waxit.com....
Hose Multi-pattern Sprayer: amzn.to/3EqKUhW
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
🎧 Music tracks in order of play:
Bionic Games by Ian Post
The French Connectiom by Stanley Gurvich
Spank by Disiac
#rupes #3dcarcare #carcraftautodetailing

[@CarlosSilva-cn1bc]

Definitly Rupes Uno Protect is a game changer 🔥🔥🔥

[@eatmoreeats9566]

Rupes uno looking good!!

[@PumaM90]

The only detailer that made me hit that bell for your alerts. Very professional and full of useful information. My 2nd favorite detailer KZbinr would be Brian from Apex Detailing. You guys are awesome 💯

[@bekiro28]

rupes couldn't even show how good they made this product i hope this company's taking care of you man this is most detailed professional honest review i see just like your other videos rupes owe's you big one on this

[@adhisanjaya235]

ya just like tht, i hv use rupes uno, and its resault amazing, easy to polish,the shine is good, also last the smell is good

[@ronayotte3571]

Allow the Rupes a half hour or so to set up, then spray GTechniq C2V3 on the finish and wipe off the residues with microfiber toweling. It will increase protection for the paintwork, up to 6 months+!

[@bignoise6702]

Thorough and fair review as usual Sandro, always love your product comparison videos. As much as I love ceramic coatings they’ve taken the fun out of weekend warrior detailing as it’s now just about maintenance and toppers, rarely get to use these type AIO products now. My old car wasn’t coated and I was a big fan of getting the HD Speed out every 6 months, couldn’t go wrong with it and results spoke for themselves on a black car.

[@SaltyC-v2k]

HD speed paired with a Buff n Shine euro 50/50 pad ,15 or 21 DA is a really good combo.

[@billpapakostas5382]

Awesome video brilliant results speak for themselves go rupes!

[@cojventures7911]

Thanks mate I enjoy your videos very much 👍🙏

[@detailtv9743]

Hello from Turkey! I came for 3D, I'm going with Rupes :)

[@roadreg1820]

You’re supposed to leave Menzerna 3-1 to cure.. then it’s easy to wipe off. It’s not designed to be wiped off immediately like a normal polish. Great comparison though, enjoyed that.

[@danlc95]

Speed also benefits from leaving it on the paint for at least 15 minutes.

[@J_S209]

Thanks

[@CarCraftAutoDetailing]

Thank you so much for the support!

[@alanwallace3253]

Looks like I missed this somehow when it first came out, I have notifications on too! Good video and I use some polishes like 3D1 for a one step but as a rule have stayed away from total all in one’s preferably to add my protection of choice. I’m becoming a fan extreme solutions acrylic polishes for finishing, ( just another option in the shop) might be a good video. I then add protection over it. Getting good results especially on jobs where I maintain the cars and can use protection that can be layered in a drying phase. It can extend time period between corrections on some vehicles I maintain without coatings.

[@paulwarren1586]

I did a side by side comparison with the 3D one and the Rupes UNO protect on my 2019 Camaro ZLE, I got 2 of the Rupes yellow medium wool pads (3 1/2 inch) for the DA polisher yesterday, I tried a spot on the trunk lid where I had scratch that bugged the heck out of me, so I tried the UNO first and yes it was slick but the scratch was still there, so I tried the 3D and that did the trick, I even did a couple of areas on the nose of the car with a white finish pad, needless to say, I will be sticking with the 3D, so I will be correcting with the 3D then use the UNO on top of that just for the protect part.

[@CarCraftAutoDetailing]

Great to hear 3D One worked well! Rupes Uno Protect is an AIO polish that would be more comparable with 3D Speed - also an AIO 3D One is a medium or one step compound comparable to Rupes Fine compound both of which will have more cut than an AIO, so that makes sense in having more success with obvious scratches.

[@petert696]

That's my favourite combo, too, when not chasing perfection. I even mix the 2 regularly.

[@c6z061]

I’ve never thought 3D speed did well on soft paint, regardless of pad. It’s cut is decent. Never thought it lived up to its hype, other than ease of use. Rupes UNO looks good! Hydrophobicity doesn’t matter to me with AIO’s.

[@Diggers_Workshop]

Another great demo! Never really considered 'All in ones' before, but I might try Rupes Uno.

[@agresta723]

Still love your videos. Expertly narrated, well filmed and clearly laid out for the viewer to understand and extract pertinent information for making a decision on what will work for their situation. Keep up the great work!

[@naeemdoola3640]

Hi, noticed that you used a Shinemate DA, how do you rate this machine vs Rupes and Flex in a similar size?

[@gregmannos]

Although you clearly know your business and do fantastic work you never come off as a know it all and even seem surprised by your results during your testing.

[@TheCeki1982]

@@CarCraftAutoDetailing Greetings from Belgium! Thanks for sharing your experience.

[@Amor1990]

He didn’t show us the foam pads in the soft paint.

[@chicagomike2111]

Great job Sandro...!

[@TheVetusMores]

In the past, I'd always thought that you get what you deserve with these all-in-one polishes. The problem with that philosophy is 1) Polishing technology has changed a lot over just the past 10 years alone, and 2) My original philosophy is admittedly a bit harsh anyway. Depending on the needs and expectations of the client (or oneself!), this can be the ideal solution. You've just convinced me to take another look at these. Besides, you're using high-end AIOs, not big-box store knockoffs, and that makes a huge difference. Thanks again, Sandro!

[@CornettoGospel]

Be interesting to see a comparison with AutoGlyms SRP, just to see how far AIO’s have come

[@yasinalan6674]

Bilgiler için teşekkürler.

[@Danialdaneshmand]

Thank you I was hesitant between Menzerna and Rupes. Rupes Uno seem pretty great. gotta pick one up.

[@koioo2]

the Menzer One-Step Polish 3in1 i can if i want to order from carclean.com .if i want to buy would buy from Meguiar's never used all in one. and yesterday by hand wash it and polish it very light use nano plast polish Nano Car Polish 500ml i felt the body was very slick. and yes enjoy it and it came from australia catch ya later

[@jamiec9866]

Almost 100k now Sandro. Keep going mate! 👍 I think I joined at around 1-3k lol Glad to see it's going well 🙂 Another great video!

[@corridosbarron3566]

3D and rupes one which one is better I want to try both

[@cigna18]

Hi Sandro, really impressive comparison! Love the Rupes. You mentioned about filling, does that mean if you freshen up a car using it, after some washes and time to wear off you’ll then start to see some defects that were ‘hidden’ by the product?

[@CarCraftAutoDetailing]

Generally it’s minor haze that AIO polishes will fill, so it’s not like your going to see and significant swirls or scratches reappear, it’s more like a dullness that in many cases just using a nice wax or sealant should sort out.

[@Audittr2108]

Love these tests. I know more products in the Uno range are on their way. Hopefully some sort of sealant to top the UNO protect base.

[@danlc95]

They've had 808 Protective Sealant out for a while. Very nice spray sealant.

[@s1rk0rcracer]

the only time i used an aio was on a friends car when he was selling it, it was an old honda accord and the car was never detailed so i just tried to make iook as good as i could in the 2 days i had time to clean out the dirty interior and do what i could on the outside, he didnt want me to do any polishing but i wanted to see what i could do on a trashed paint in a short amount of time. The car ended up alot better since the paint was so bad, any improvment would make it look alot better, but i dont think i will be using aio-s again.

[@dustin3700]

I am curious on the sickness and durability test did you let the product sit on the panels for a at least 30 minutes before wipe off? Being that that they are polymers they need time to bond. I usually polish the whole vehicle and let it sit for 30 minutes before removal and the protection last about twice as long as if I wipe it off immediately after polishing.

[@CarCraftAutoDetailing]

Everything we use is made up of polymers, it’s about what specific polymers they contain which can vary a lot. Generally speaking, machine applications tend to instantly flash and bond the active resins to the paint, whereas hand applications tend to require longer sitting periods to allow the solvents to escape - that’s been my experience.

[@devilambrose]

So much appriciate the video, especially in this kind of crazy time. Take care man! I wish you can hold a class for us to attend. P.S. you are much more like a lab teacher than all teacher I met in high school........ P.P.S. stupid question, can I put wax or sealant on top once I am done with say, UNO ?

[@devilambrose]

@@CarCraftAutoDetailing Thanks for the tips ! IMO, for 1L 3 in1 product, and the amount you used in the video...... I found it hard to move back to cheap retail product XD. Purchasing the AIO in short term for sure.

[@sbrick9589]

been looking for a vid like this hd speed vs menz 3 in1 love it

[@louisscutti8497]

What 3 Polishing Pads would you recommend to use with Rupes Uno? Ones you feel will do just an all around good job.

[@CarCraftAutoDetailing]

The Lake Country polishing microfibre pad could be good on harder paints, the LC blue HDO foam pad of medium paints and the LC orange HDO of softer paints

[@nicksdragon6929]

You have verified all that I found to be true with rupes it is just unbelievable the difference in how I've switched 100% to rupe's pads especially and products knowledgeably. Great narrative great demonstrations fantastic video as always thank you so much for all you do

[@hakimrahman85]

Can you apply ceramic coating after using Rupes UNO Protect ?

[@MLife1972]

I really like your clinical approach and your easy-going personality. I didn't know these sorts of products existed so I'm keen to learn more.

[@jatiyanon]

How about uno compare to Meg ultimate polish? Is it use for same duty?

[@bbdetailing9123]

Not same category. These are products that leave some form of protection behind. Ultimate Polish is just a polish, no wax or sealant left behind

[@NickM1013]

These are my favorite videos that you put out. Nice work Sandro!

[@albertomendoza2251]

Dear Maestro: Reading a lot about AIOs... Do you consider Carpro Essence as an AIO? In advance thank you. Greetings from Monterrey México.

[@CarCraftAutoDetailing]

I would consider it an AIO but I guess more specifically a primer polish

[@sadaisebrenabravo5150]

RUPES UNO is amazing but rarely we detaillers use those all in one.

[@Amolavelocicoaster_363-23.]

Hello, can you apply a ceramic gtechniq exo v4, c1, serum lights after the essence of carpro? thank you very much from argentina

[@CarCraftAutoDetailing]

You can generally apply most ceramic coatings over Carpro Essence but there may be some exceptions- I’m not sure about CSL, I’d guess yes, but I could be wrong.

[@edburness6161]

Hi Sandro, fantastic work you’re doing making life a lot easier for the weekend warriors - definitely my go to channel now! Now you’ve tested both SIO and non SIO AIO products, how do you feel UNO Protect and AW Enigma compare in their cut, finish and ease of use? any preference? Their protection levels don’t interest me so much! Thank you

[@skano500]

Can you add a ceramic topping on these finishes?

[@acemobiledetails2531]

Very well put together videos. Thank you so much for all your time and effort, sir!

[@SouthAndes]

Thanks for your time and explanation Sandro! Your channel is the best! Professional and honest as is common in your videos

[@kernbelfon9774]

just the tutorial I was looking for. Thank Sandro.

[@DavidC1]

this was a great review, I just used Menzurna AIO this past weekend and i really enjoyed it and for my environment and situation it worked great and i was able to archive really good results in a short amount of time.

[@CarCraftAutoDetailing]

Really fantastic to hear mate, I’m glad it all went well!

[@markusbendi]

Angel Wax have 1 AIO also as i belive

[@user-bf6go9nf6g]

Another awesome comparison Sandro! If I were to use Uno Protect, after 4 hour cure, could I top with a ceramic or Graphene spray sealant? Thank you!

[@CarCraftAutoDetailing]

Yes, unless you’re in quite a cold environment 4hrs should do it, otherwise allowing it to cure over night should certainly be long enough to add a spray sealant on top. Putting the car in direct sunlight for an hour or so and then allowing it to cool in shade will also cure it nicely.

[@marioskosmidhs9454]

Great great video. Thanks a lot. Xan i ask? Do you have any axperience with AIO scholl a15?? Because those are not availiable in my market

[@marioskosmidhs9454]

@@CarCraftAutoDetailing thanks sir. I will try it. Both menz and scholl have great prises in my market. So either one sould do the job on average. Thanks again for your time to answer me. My best regards from Athens Greece Keep up you are great

[@Mark-cw3io]

Don’t like Rupes UNO Protect. Impossible to get out of pads, especially fiber pads. Any tips?

[@CarCraftAutoDetailing]

I use laundry Velvet soap to clean the pads over warm running water which works great for me, but I don’t think Rupes Uno is any better or worse than any other AIO polish, as they are all a little harder to clean.

[@aelz9794]

The good old 3m xl cut, for me the best....

[@EricGohImages]

Amazing. Thank you so much I’ve been trying to figure out Speed or Uno. Clearly it’s Uno. Can’t imagine it topped with a wax. But one last question as it’s a AIO since there are fillers, will it show blemishes again after 3-5 washes ?

[@EricGohImages]

Car Craft Auto Detailing here comes the powerlock and 845 combo again haha! But thanks so much man

[@coreykeyz3471]

There’s no fillers in uno protect

[@alexisamtosta]

I ordered my 3D speed but still didnt arrive. I was planning to use it with a wool pad.

[@kingssing]

Blue or black foam pad Us with Dual Action buffer I purchased my buffer at Harbor Freight and it does well also purchase pads from them.

[@stevecheshire5046]

In the normal cutting and polish range of 3d and 3m which would you say is better?

[@CarCraftAutoDetailing]

I think that 3M(that owns 3D) tends to gear their 3M compounds better towards body shops and their specific paint systems and indoor environments as well as car manufacturers, whereas the 3D line is meant for broader paint types and situations that better suit detailers working in diverse situations, environments and on very diverse paints.

[@prophinishnyc31]

I wonder how sonax final Holds up against the three

[@muhamadtaufiq2195]

R.U.P🔥🔥✌️

[@paulhamilton6013]

Tried some of these myself, just don’t see a need for them in my business, cars I tested them on I found the wax didn’t last very long, another you need to consider is that the wax also works as a filler. I found a single stage correction and separate wax works a lot better.

[@danlc95]

They work great for my situation. But, I agree about the longevity. I'll give up some cut for extended durability. I've found that Duragloss 101 (Polish & Cleaner), or Duragloss 501 (RV Polish & Cleaner) usually does the job unless the paint is absolutely thrashed. I prefer 101, and that's one hell of an ancient product, but it works so well.

[@Dzastfakenrajd]

@Paul Hamilton exactly what I was thinking - I tend to use menzerna 2500 as my one step product and then top it with a wax. What's yours ?

[@paulhamilton6013]

MotoVlog 3City Scholls S20 black is my go to for one step corrections, i also use the Scholls purple pad which honestly I think is the best all round pad on the market. I’m a big Koch Chemie user and they tell me they have a new one step compound in the making so that should be interesting 🤔👍

[@sammypower6193]

Thank you for this, this proved to be quiet helpful. Would it be possible to do some sort of follow up test seeing how thick the paint would be before and after the defect removal? As it would show how aggressive each polish is with similar use and environment.

[@MK-hi5ix]

I really enjoy your vids ! I always learn something. I work a lot with the menzerna 3in1 polish and never tested rupes uno. Now i will order it.

[@zhylex332]

The more videos I watch of you doing these product comparisons, it becomes more and more apparent that you can always trust good top of the line companies like Rupes, CarPro, ect. There are some one off's from B tier brands that can maybe match or barely beat some of the top of the line stuff, but very rare. Thanks for all your hard work on these product testing series, you are saving thousands of other people time and money and the headache of buying and testing all these products to find the best one. A non biased opinion is hard to find these days, thank you sir.

[@derek3142]

Best AIO test I’ve ever seen, thanks

[@usagimoto1423]

How does the Meguiars paint conditioner Compare with These other product

[@CarCraftAutoDetailing]

I really haven’t heard of Meguiars paint conditioner

[@usagimoto1423]

Car Craft Auto Detailing oh really, a lot of people in the states use it a lot that’s why I ask

[@CarCraftAutoDetailing]

I think there’s a large number of Meguiar’s products that just don’t make there way to Australia unfortunately!

[@STILLNIGHTPEARL]

@@usagimoto1423 rupes uno protect and Meguiar’s 166 ultra polishing wax are comparable, I like 166 over Meguiar’s 151 paint reconditioning cream, it’s better in every way.

[@chandlermcclelland6810]

Can you, or should you use this with say the last coat or shine armour?

[@CarCraftAutoDetailing]

Yes you can

[@BadRonald1]

IMO I believe you used the wrong polish to represent Menzerna. The 3-1 is cut, polish and wax all in one. Is the rupes a wax also ? Or the other brand ? You see you used polish w/ wax. I feel you should have used the 400 Heavy Cut Compound. Then that would’ve been more fair. Unless the test was which polish protects also.

[@CarCraftAutoDetailing]

All three products are the same category of AIO polishes - FC400 is not.

[@spoku4996]

Can the rupes uno protect be used in direct sunlight like the 3D speed? I am in Perth so we still suffer from major sun light and high temps in spring and summer.

[@CarCraftAutoDetailing]

I had a go with Uno in direct sunlight and it seemed very forgiving, but I can’t say I’ve used it extensively outdoors as I’m mostly working indoors these days.

[@spoku4996]

@@CarCraftAutoDetailing Thanks for that. I generally don't do work outdoors, more likely in my garage with the door open. Subbed. Not many Aussie's that do detailing. Lucky you're a great one.

[@sasavatbusayabandh9239]

Great video. 🎉🎉🎉 very helpful

[@CHIBA280CRV]

Fantastic informative video thank you sir.

[@pvj6993]

Thank you for this I use HD speed and have good results but have been told I need to use mezzerna but Uno might be the way to go

[@brad2807]

With aio on a soft pad at low speeds is it as safe as a glaze to use?

[@CarCraftAutoDetailing]

AIO’s typically contain smaller and minimal abrasives so they are generally very safe even for beginners especially if used with a gentle foam polishing or finish pads. You may however find if you use them with a completely non-abrasive wax application machine pad and with an overly gentle technique, those pads and that technique may not be aggressive enough to break those polishes down and it could result it a slightly hazy finish.

[@oscarsmh1010]

Do you wipe off with ipa after polish with these products or just wipe off clean?

[@CarCraftAutoDetailing]

No, you shouldn’t do an IPA wipe after using AIO polishes

[@oscarsmh1010]

Ok so it done after wipe cool

[@theirishman088]

Alot of dealerships are doing this. Fluff and buff and cut the check. No real detailing in most of those places but management loves it when it looks good enough and the customer is happy for the day but really has little protection or paint correction.

[@M5aximus]

What do you think of PS Playmaker? :)

[@CarCraftAutoDetailing]

I actually didn’t even know it existed until I just searched it now

[@neilbenzie3618]

Another really good video Sandro👍🏻😊, that’s one thing I have never used is an aio to leave some sort of correction/protection behind . Have you ever used 3d one ? If so how do you find it in regards to defect removal and finishing on different paint finishes ?

[@christopherweir9419]

3D One is pretty versatile. Cut wise I rated it about 5/10 but it plays nicely with the paint types I have used it on. Wipe off can be a little oily but nothing too bad.

[@danlc95]

AIO is different than a "one step". 3D ONE is an abrasive only polish. It cuts, polishes, or finishes without leaving any protection behind. 3D Speed is similar. It has less potential cut overall, similar finishing, and a Polymer/Montan wax protection package. Unfortunately, the industry is confused about terms. They should have just kept the "Cleaner Wax" title foe products like Speed, and "Medium Polish" for polishes that can cut and finish in the same set - without protection. All In One - All meaning abrading paint + leaving wax One Step Polish - A polish that cuts, polishes, and finishes in a single application. As far as 3D One's performance? It's my starting point for paint corrections. In the event It's not getting to the point fast enough I'll switch to 3D ACA500. 3D ONE does a great job cutting though. Everything is paint dependent though.

[@FinanceMan]

Rupes seems hands down the best

[@kikcodog]

Hi Sandro, hope you, your family and friends are all holding up well Down Under. We are in lock down here in New England and they say the worst is still to come. Finger crossed it get better once the weather improves. Stay safe! PS - Tunch Goren, chief chemist and owner of 3D, told Mike Phillips he frequently tweaks his formulations. There's a great series on Autogeeks with him talking about his products. Here's a link to one kzbin.info/www/bejne/mafdgXeBad6DfJo

[@podium918]

I own all three

[@DaiLoo888]

Menzerna has better clarity, and eliminate hazing and swirl, i see the light more clearly

[@RCarlitos]

in the cut and brightness table how much is hd speed? Thank you

[@CarCraftAutoDetailing]

I’m not sure what figure to put on it, but for an AIO polish I think it cuts and cleans well with some nice added gloss and saturation.

[@RCarlitos]

@@CarCraftAutoDetailing 👍👍👍

[@Andy-From-England]

Nice video sandro.. Please may i ask you a question.. ?....these ads shown during your videos.. Do you get money paid if i watch full length? And you dont if they skip them ???

[@edgar979]

Which one do you recommend????

[@enobil]

Great comparison, thanks!

[@kosbir82]

Congratulations for the thorough investigation and experimentation!

[@DildeepakSidhu]

Hi , my uno protect turned into pink does that mean it’s expired Thanks

[@CarCraftAutoDetailing]

I’m not sure, haven’t seen that before - Rupes themselves might be best to ask.

[@TippyTravels]

Hi. Just wondering for DIYers, can the rupes uno protect be applied by hand?

[@arukarthik1986]

Please review about Scholl concept all in one

[@CarCraftAutoDetailing]

I'll try to add it to a future video!

[@jtm1979]

Have you tested any sealant on top of Uno Protect?

[@CarCraftAutoDetailing]

I’ve tried a couple of Nova sealants over it and it seemed great, but I haven’t done any in-depth testing

[@functionaldoc5054]

don't use AIo but use Rupes pads and polishes a lot with LHR15 MK3 DA. I also like Sonax Perfect finish 4:1 since it finishes nicely. Another great video and I will keep watching.

[@jacekk6913]

Rupes looks great for one-step - I've almost bought Menzerna recently. I'm only thinking if I want top a Sonax Ceramic or Griots 3in1 spray on top, should I wipe the surface with something first?? Uno has silicons, polymers and Carnauba inside. Amateur DA home user.

[@CarCraftAutoDetailing]

No, just allow it to cure for at least a few hours before you put a top sealant or wax, or just add it after the next wash.

[@jatiyanon]

Not like wax/sealant, the result depend on abrasive level, so maybe rupes is more compound not polish.

[@federicodanese]

Bravo! Grazie!

[@christopherweir9419]

Nice comparison Sandro. I'm personally not a fan of AIOs but they do have their place. I'd rather do a mid-range polish and top with a sealant. I feel you get better correction and a full sealant/wax lasts longer.

[@Codriver72]

Another fantastic comparision. We are beeing spoiled with the information you share with us.

[@leonardogarcia9134]

Thank you for this informative video. I also like the way how you do your analysis..-Im your fan from the Philippines.

[@Baz9667]

That outro song 🤣🤣

[@PeteyMcSavage]

Sandro content is great and your great at laying out a video thanks I really thank you what can viewers do to help you when u release a video. A lot of us don’t know

[@hussainsvt9853]

Great review. this exactly what I wanted to see.

[@Amor1990]

Why didn’t you use foam pads on the soft paint?

[@bwilliam4023]

HD speed just some hype marketing stuff.