THE BEST AIO CAR POLISH

Menz one step 3 in 1 polish
tinyurl.com/4e...
Scholl E-All in one
tinyurl.com/4k...
Angelwax Enigma AIO
tinyurl.com/bd...
Autofinesse Tripple
amzn.to/3TnNOJ9
Bilt Hamber Micro Fine
amzn.to/3AS2h96
Farecla G3 pro all in one
amzn.to/3wCu36W
Koch P6
tinyurl.com/yn...
Meguiars 3 in 1 wax
amzn.to/3wAmXA4
Rupes Uno Protect
tinyurl.com/4a...
3D Speed
tinyurl.com/db...
prices can change from the point when I shot this video.
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8...
Shampoo
tinyurl.com/yb...
All Purpose Cleaner
tinyurl.com/yd...
Fallout remover
tinyurl.com/ya...
Tar and Panel Cleaner
tinyurl.com/y9...
Clay Bars
tinyurl.com/y7...
Clay Lube
tinyurl.com/yc...
Paste Wax
tinyurl.com/yc...
Drying Aid/QD Concentrate
tinyurl.com/ya...
Sealant
tinyurl.com/ya...
Detail Spray
tinyurl.com/yd...
Water Spot Remover
tinyurl.com/y9...
Tyre and Trim Dressing
tinyurl.com/yb...
Machine Polishers
tinyurl.com/yb...
Polishing Pads
tinyurl.com/y8...
Polishes
tinyurl.com/y9...
Panel Wipe
tinyurl.com/y8...
Microfiber Buffing cloths
tinyurl.com/ya...
Twisted loop Drying Towel
tinyurl.com/yb...
Mini Plush Drying Towels
tinyurl.com/yc...
Wash Mitts
tinyurl.com/y7...
#forensicdetailing #detailing

[@keithblacknell957]

Love these tests. If you play around with the scores and apply what's important as an individual, then you get very different results. Take the points for bottle tops and price out of the equation for example. Brilliant video!

[@YeCannyDaeThat]

Yeah agree, I took the slickness and protection out as it's not important to me (will be waxing after). Great to "see the wortking".

[@detailspots]

the best forensic detailing channel ever, i've learned more from this channel than other channel. good job!!!!!!!

[@detailspots]

i've use 3d speed on a honda vezel crystal black paint and the gloss is just amazing, because of the montan wax.

[@howarddavies136]

That intro was like watching the Kings speech! Then a return to form for the rest of the video 🤣 that's why I love this channel.

[@paulhamilton6013]

Glad to see you doing these sort of tests again, in my business I use the P6 for single stage corrections, uno protect for enhancements.

[@dustincurtis8229]

I have been watching for maybe 4 months or so and the more videos I watch of yours the more I feel like you couldn't have picked a better channel name. I really enjoy these in-depth videos that you do. They provide plenty of details to help me pick the item that best suits my needs. Thank you for all the effort and thought that you put in each video.

[@ForensicDetailing]

Thx Dustin appreciate it m8 welcome to the channel

[@RedXcz]

Jon, I always rewatch your videos after several months, so here I am for the second or maybe third time haha. This time I am making notes though to not forget so easily! Thank you

[@antoniou5]

You are a top g for doing these time consuming comparisons. Love it! Also being lately researching in polishing plastic trims. Is that possible?

[@ForensicDetailing]

gloss plastic trim yes but not all types of plastic mate.

[@jasonwilson7674]

I absolutely love that AF tripple, really good stuff, going to have a gander at your favourite the 3D speed 😊

[@mclarenformula5042]

Your awesome John the real aio reviewer of detailing products

[@leeroy3856]

I really got a lot out of this video. Excellent video as always. Your hard work and effort shines forth and is greatly appreciated.

[@rezi420]

Thank you John for doing this types of test and letting us know which products are the best

[@joevanseeters2873]

The 3D Speed result surprised me. I know that a LOT of detailers here in the USA use 3D speed, especially mobile detailers due to it's efficiency and results, and price. I might have to pick up a bottle of that stuff next time Autogeek or someone has a sale.

[@ManxAndy]

I use the Koch Chem, on single stage jobs…..it’s streets ahead for ease of use, I’ll always finish off with a coat of Car-Pro reload over as an extra stage of hydrophobic protection, , thankyou for the work you put in to these videos…..great content 👍🇮🇲💪

[@damojump]

Great fair test as always. I've got the bolt hamber sat in the garage waiting for the hosepipe ban to finish, bought after an earlier test you did with their products. Glad to hear it's still going strong!

[@Audittr2108]

Great comparison test as always. Take the lid element out and surprising how that changes the results. I swap lids and sprayers all the time to get the best out of a product.

[@tommyholt3465]

If you like the look of 3D Speed, but don’t need a polish 3D Poxy has the Montan wax w/o abrasives. It only last a couple of months on a daily driver but it looks great and is easy to use. The great thing about these products is that you can see where you have been by wiping off after you finish the whole vehicle.

[@danmorrissette4814]

Yes Sir, A lot of Work went into this Test! Thank You so much! Love 3D & Rupes , !!

[@domknill]

Great vid and so useful for weekend warriors who can’t afford to sample many products. I use Sonax 06-04 which works really well for me.

[@ballistic20vt]

The Bilt Hamber is brilliant if you want to take off any protection, buff up the paint slightly and lay down some new protection. You can layer it with double speed. You go with Koch or 3D speed if you want more cutting. Glad you worked the 3D in there, wanted to see something on it for a while

[@davidboyce6427]

Jon the Souz Chef doing polish reviews and grilling burgers 👍. Bye for now; love that sign off quote yo do👍

[@killacamfoo]

Great test. Would love to see a similar one on one steps without protection.

[@ForensicDetailing]

ive done this mate. best single state polish video

[@paultaylor9652]

Great video Jon, shame Autoglym SRP wasn't in it though.

[@ForensicDetailing]

its more a primer glaze than an AIO mate.

[@TheNotimprezed]

The main problem with any product using diminishing abrasives to cut and polish in 1 step is the time needed to work the product until it is broken down into a polish. I've tried a few that took so long to finish down on black paint it was quicker to use compound and polish.

[@davidfisher7952]

Carpro essence is supposed to have amazing protection they claim up to a year I believe

[@Jnaszty559]

Going give 3D speed a try this fall when I cools down here in California. Wonder how it will make my bright orange mustang look 👀.

[@_Bigney]

Great Video! I'd be interested where something like Auto Glym SRP would come in with this lot! That's my go AIO to for making the car shine, I like it because it doesn't cut much but adds what seems like lots of gloss and clarity, then I just put a Wax on top....

[@ForensicDetailing]

its more a glaze than an AIO

[@_Bigney]

@@ForensicDetailing oh really, I was always under the understanding that it had mild abrasives in!? Probably for the best on my soft paint.. 😅

[@Dizzle9910]

Thanks for this mate, really enjoy your videos

[@998Twin]

Very interesting as always,ever thought of doing a comparison on the real cheaper end of the market polishes and swirl removers ? Often found I supermarkets and discount outlets like Wilko . 👍

[@Scwdetail]

Being here in the States 3D products are easy to get and priced right. I use 3D One on almost every car in some sort of way-I love it that much. 3D Speed I will use where a customer isn’t wanting to pay for better protection. Polishes well, cuts enough and slickery when wiped off. People love that finish, wish it would last longer but the heat in Texas just bakes it off in no time. That Bilt bottle in inexcusable- would drive me crazy! Thanks for taking time out of your work day to put in all the effort to do these. Learn something new every time. Cheers! Kyle

[@mmsicis1992]

Nice test. Wondering how Tw hybrid ceramic polish & wax would compare. As for now it’s my go-to one step polish. It’s cheap, slick and glossy. Cut is not superb but it beats the most swirls. Protection is also amazing not sure of durability on its own.

[@ForensicDetailing]

It's more a glaze than an aio

[@mmsicis1992]

@@ForensicDetailing Well not sure on that. It does correct and not just mask the swirls. If i clean it immediately with gyeon prep the swirls and fine scratches don’t come back. It doesn’t have compound capabilities that’s for sure. If someone looks for deeper correction i’ll tackle it with menzerna 400, in most cases it’s going to be 2 step process as it doesn’t really finish perfectly.

[@01123581321341]

Great test Jon as always. Surprised Tripple was down there, it’s a lovely product. Koch winning is maybe not super surprising. Not actually used an AIO amazingly so can’t comment much. You could take out the lid scores if you’re not bothered I guess.

[@404notfound.....]

I have used anglewax aio with great success!! Great video Jon.

[@shinychariotdetailing9707]

Brilliant review and testing first class

[@DavidC1]

Get in Jon

[@metalmadhammer7376]

I can't ever see me wanting to use an AIO as I like to have a bespoke protectant so a bit pointless. Interesting newcomer (to me) in 3D though, hope you take heed and test some other products from them. Huge fan of Mike Philips who I believe helped improve some of their formulas and is now Director of global training for them.

[@reallysimpledetailing1160]

Used Menzerna 3 in 1, very decent level of cut and gloss and can easily achieve a one step on softer / medium paint. I was wondering why so many provided such a low level of protection: could it be that you'd need to leave the polish to haze a bit before wiping it off, as I recall from the instructions of Menzerna that's what they tell you to do? Could that have made any difference in the final results?

[@ForensicDetailing]

where applicable we left the products to cure on the panel before buff. and then panel was left over night. I think its more because abrasives need like oily carriers that dont dry out when you are working them, this seems to compramise durability i think.

[@stevedunlop1275]

Great as usual Jon, hope you enjoyed breakfast at Goodwood this morning!

[@ForensicDetailing]

were u there steve? was a great morning mate some nice cars going round

[@stevedunlop1275]

@@ForensicDetailing we sure were! Love it there, we were sitting opposite you guys inside, lovely cars as you say, loved the orange AMG..

[@ForensicDetailing]

and you didnt say hello! wtf :) that orange AMG belongs to david the guy with the 720s.

[@stevedunlop1275]

@@ForensicDetailing no I wouldn’t dream of interrupting you having breakfast! We live near to Goodwood and are often there so if I see you again and your not eating I will say hello! 😀😀

[@PROmarkgal]

Hi John, Can you do some testing with Wax & Away Products to see how they perform

[@micd9256]

Excellent work. I think an AIO has lost some appeal over the years. It’s so quick and so easy to follow up with a protection step these days. That’s why I reach for 3D One and not Speed. I have yet to try Griots new ceramic AIO wax. It could be a real winner.

[@ForensicDetailing]

not tired the the griots stuff mate.

[@davidgeddes6355]

John you say BH is £83.90 - its £53.90 according to your board!

[@Housemusic86]

Another great video. What do you think of ease of use and finishing down when comparing these?

[@ForensicDetailing]

ease of use is tripple for me, finishing down prolly 3D or Koch

[@404notfound.....]

Good day from Canada 🇨🇦

[@owensteele1645]

Was that lightning flash @0:12 intended? Very cool.

[@ForensicDetailing]

I blew the yearly cgi budget on that

[@davepuffett8608]

Brill test John, but for me the lid bonus taken out gives a totally different results, Bilt got penalised for its lid really? Good to see the test tho!

[@ForensicDetailing]

Yer but only 3 point bonus.

[@interestingspagetti]

Concept products????? What i use. Try "Infinity". I buy in 5 litres. But i think 1 litre is around £11 +vat. amazing beading for anyone that has never polished a car before. Very low chalk. But they do a range with varing cuts and uses.

[@orthodox1717]

Great test! I’m surprised about the lack of gloss from Rupes. Was there excess haze/micromarring?

[@ForensicDetailing]

panel was cut with blue rupes wool and blue compound and its 2pack paint. so it may just be the case the set piece of 4 passes on orange flex foam was not right for the product.

[@euanmclapperton2451]

Triple is a fantastic product. Easy to apply with a sensational buff. The only downside is that the protection and gloss don't last particularly long. Saying that I detail my car most weekends so it isn't a problem for me.

[@amyk9813]

How long are we talking? Would you need to re polish it?

[@SamFillingham]

Hi, I just wanted to ask why you used the BH Micro Fine in this test instead of the BH cleanser polish? And also if you would have time to compare all of the Bilt Hamber polishes / last stage protections against each other? Thanks for all you do!

[@ForensicDetailing]

hi ya, BH cleansers polish is a primer polish (or glaze) it prepares the surface for protection. A bit like super resin polish. This video we compare AIO. AIO polish the surface and leaves down protection.

[@SamFillingham]

@@ForensicDetailing ah right okay I understand now, thank you for bringing me up to speed haha. And thanks for the very quick reply! I appreciate everything you do and the time you spend creating all this media for all of us!

[@DavidC1]

😁THERE CAN BE ONLY 1😁

[@SuperDuncan67]

Another brilliant thing about 3D Speed is that you can use it outside in the sunshine and it does leave a superb finish.

[@crimsonpirate1710]

Thats good to know

[@arthurlbn]

I would like to see a video about, how to renew this AIO... should just made aplication on the old AIO ? And the old aio will be gone ? Or need use a chemical to remove it ? There is a lot of videos that explain how to use aplicate but there is not explaning about the renew method... rupes advanced has SI02, how renew it ?

[@ForensicDetailing]

Yer just rebuff you will strip old product and leave fresh material

[@stephenlouden480]

I use as many3D products in my detailing business as i can. for the price and final outcome, I believe they are one of the best mfgs in the detailing industry. I love 3D speed, also use 3D Wipe, 3D Bead it Up, and 3D Wheel Brite. amazing arsenal of affordable and quality products that do exactly what they claim to. great videos. keep it up

[@gimblito8172]

I don't get why anyone would use an AOI when you can use something like 3D One for better cut and Seal and Shine for superior protection

[@ForensicDetailing]

For speed mate.

[@Kiki099]

Wonderful video These is one product i would have loved to see in the line up its one that i use " Vonixx Blend AIO" Not to sure how difficult it is to get ahold of that in your area but i can definitely say its a wonderful aio

[@mbrunskill]

I wonder how UNO Advanced would do in this test

[@Auris58]

I have used various AIO'S over the year's and always go back to Bilt Hamber Cleanser Polish

[@aalborgen01]

I would like to see products like Zvizzer One, and Kenotek EAT 500 or 800 :)

[@highdefinitiondetail5298]

Your missing out massively on Blackfire One Step that stuff is very aggressive AIO that performs all the time

[@M.E63]

I’ve got the angelwax enigma and the auto finnese tripple, both good products , I got mine cheap on Black Friday as angelwax products was half price , so might be a good idea to wait till November as anglewax and auto finnese have great deals, I got 500ml anglewax ceramic one for £17-18

[@kennyg4744]

Great test as always John. I am a just an enthusiast and just do the family cars so things like cost and lid are not important to me at all. Therefore removing these two test changes the result to: 1 BH 1 Megs 3 Koch 4 Fracella 4 3D

[@johnmelling9950]

I agree with you on the 3D Speed. First time i used it i went online and bought the bigger 1lt bottle. It has an almost never ending work time with no dusting, wont mark plastic trims and the finish is electric like you said and i find it really darkens the paint. You can turn an old crapper around and make it look like a different car in no time. Ive used a few other 3D products and they have all impressed me. Bead It Up is awesome and i use it to wipe down and add extra protection after using Speed, it smells amazing too. The 3D One compound is also amazing stuff, its made all my other compounds redundant as it cuts like crazy with a hard pad and finishes right down with a soft pad.

[@stephencook6333]

Another excellent video. Really enjoy your content. Can I tell you about my number 1 detailing piece of kit. It’s an ikea stool used for toddlers to reach the sink and toilet. Perfect stool for working in wheels and reaching the roof of the wife’s rav4. Two holes finger holes to move it around and responds to the right foot moving it around too!! Totally random I know but I can’t imagine working without it as easily (and it was cheap too)!

[@GMDetails]

Excellent test Jon, recently used the Farecla AIO on a very swirled Vauxhall & I found the cut excellent , mind you I was using their blue cutting pad too 😅 Also agreed with your summary of Angelwax Enigma AIO but what’s your thoughts on applying a sealant or wax on top of quite a poor level of LSP from the polish? Would longevity be compromised enough to bother if it just wasn’t going to last? 🤔

[@ForensicDetailing]

I'm not too sure m8 I do still have it so will use again no doubt.

[@jwilson1744]

Love these reviews. I would have liked to see a ‘buff-ability’ rating - the main reason I agree with you and also like Tripple is the buff. Would you do a quick rating in the comments? Did I see that you’re doing a liquid wax review with BH Hydra-Wax included? Will be interested in that - would actually be keen to see Micro-Fine vs Hydra-Wax and what trade-off in protection there is by having that minimal cut/polish element.

[@nicorallysport]

At the time I loved using meguiar's white wax (light wax, depending on the country!), with the double action polisher it gave impressive results for an aio! But in my opinion the best aio and meguiar's D166 ultra polishing wax, good correction superb finish and good protection. An old aio that worked great was meguiar's color x. But less abrasive than white wax and D166! But the finish was great

[@corinnelaking569]

This is interesting. Here in Canada, the Meguiar's might well have scored much higher, because it's a value priced consumer product here, and readily available at retailers. Something like Bilt Hamber has a price premium as an "imported product," with limited vendors specializing in professional detailing supplies. Interesting things to consider, all based on viewpoints dependant on locale. Great video, Jon thanks much.

[@sirmanni4534]

Would have liked to seen Zymol HD-Cleanse in this comparison

[@ShortCycle.]

Great group test. I'm in no hurry to swap out my bought-on-a-whim Tripple - it's exceeded my expectations at its price. Nice product that appeals to the senses when worked, and wallet - does definitely need a better cap! Not much bother to apply a quick topper of something else to add durable protection.

[@98JamesNixon]

How come you always say AOI not AIO?

[@ForensicDetailing]

cuz Im an idiot lol

[@goldar4846]

How does turtle wax one and done stack up against these? Any reason why you chose not to include it in this test?

[@zzhughesd]

Aha the American 3D product almost won. I’ll grab some AIO

[@r.k862]

Best detailing channel. Please do water etching test on ceramic coatings. Have been waiting for about 4 years now 😄

[@marybetheby5184]

This one is easy,,,Uno protect.Nothing is more versatile than that.

[@BigCarKilla]

Griots all in one claims great cut and great protection durability - a shame it wasn’t included in this test. .

[@YeCannyDaeThat]

No Autoglymm SRP? Would this not be considered an AIO? Not enough cut?

[@ForensicDetailing]

It's a glaze m8 not aio

[@YeCannyDaeThat]

@@ForensicDetailing I didn't know that! thanks!

[@6daymember]

HI. Very informative thanks. In2Detailing have Zvizzer One as part of their kit. Have you tried that one - if so how does it perform? Thanks!

[@ForensicDetailing]

Zbizzer is very good abrasive

[@marcuslima2535]

Nowadays, if you had to choose 1 AIO to do a fast one step polish to a customer like between 30min-1h of job, you`d choose rupes protect, advanced or 3d speed? Cheers

[@ForensicDetailing]

Yes I think Rupes Advanced. 3d speed is cool, Ive kept this product too but the protection side isnt as good as advanced.

[@stirkz]

Love 3d Speed used to turn round many an old tired clear and single stage red, great stuff

[@jezlucas3878]

Wonder how 1 and done would compare to those

[@ForensicDetailing]

thats not an AIO its just a single stage pure abrasive.

[@jezlucas3878]

@@ForensicDetailing oh many thanks , I get on with the stuff . Not sure if I should stick with it or look for another product.

[@joshuatester8197]

Just picked up a bottle of the Rupes on special as my first AiO. Super pleased with those test results.

[@ziachoudhry2954]

Disappointed you didn't include TW one and done hybrid graphene. How would you rate that to these.

[@ForensicDetailing]

There's no such product.

[@ziachoudhry2954]

@@ForensicDetailing I'm sure you have highlighted the turtle wax hybrid graphene range. My comment was wrong anyway as realised this is a test with all in one including some protection. The turtle wax platelet technology has no protection & requires follow by the flex graphene wax

[@CraigK80]

No Uno advanced mate? 🤷🏻‍♂️ love the RUPES gear but as you mentioned you have to work Uno Protect on the panel (wool pad) more to achieve correction, but once cured and buffed off the gloss I’ve achieved with this product is exceptional (BMW Black Sapphire metallic comes up like glass/pool of ink) Can’t understand the score of 1 to be fair? Somethings not right there mate. Agree with the BH product, again another class act. Great vid as always mate keep up the good work 😉

[@ForensicDetailing]

was not around when I did this.

[@statustrade4901]

How do you think Autoglym super resin would compare in this test a it’s still a great all round product

[@ForensicDetailing]

It's not an aio it's a primer glaze really.

[@statustrade4901]

@@ForensicDetailing Many thanks for the explanation 👍

[@savmunago5505]

Great video - wanted to pick ur brains - rusty looking brakes - is there a product I can use to remove this? I don’t really want to take the wheel off. Cheers

[@ForensicDetailing]

if its the unpainted bare caliper rusting really you need to take the wheel off and wire brush the rust off rust treat and get it pro painted. otherwise the rust comes back. If its the brake disc just leave it. you can primer the brake hub but its a lot of messing around.

[@MEG63115]

Why didn't you include the Turtle Wax product - Hybrid Solution Ceramic Polish and Wax? I saw your other video that included it (comparing their black polish) and seem like it performed well. Regardless, great comparison

[@ForensicDetailing]

I think it's a primer polish like srp not an aio

[@MEG63115]

@@ForensicDetailing I'm a complete novice just started looking into this stuff. Picking up some junk panels to work on before I start working on my car's pearl white. I just figured anything that can do some correction and leave protection would be an AIO. I did watch another video where the detailer said the Turtle Wax product doesn't work well with a buffer and should be primarily used as a hand polished product. Thanks again for all the great info

[@daveallsopp320]

It’s all in the buffage Jon as well you know🤣🤣🤣🤣

[@acward2007]

Brilliant test with surprising results. Bilt Hamber seems to be a formidable contender and quite shocked as to Menzerna which is the brand I’ve been using but not that same product.

[@ForensicDetailing]

BH has great protection but isn't like a machine polish aio so much.

[@TheBearbertie]

Would 3D work well by hand or better off with Tripple?

[@ForensicDetailing]

3d best in machine

[@carsaremeee]

You've got it right this time jon AIO not AOI. Another great video

[@markvanheeswijk3656]

Hi, Have you used/tried Klasse AIO polish? If so, what did you think? Thanks.

[@ForensicDetailing]

Not yet m8

[@doso1313]

No offence, your video were too long. Never under 25 minutes. How many half an hour there is in a day,? Watching your video is time wasting. I do like and appreciate how. you breaks things down in detail. Do try and make video short and compact. No wonder the number of subscribers is only....

[@ForensicDetailing]

these are not done to please the algorythm, they are done to please me ;)

[@doso1313]

@@ForensicDetailing too bad, how I wish to see a shorter version of video. Hope I've not offended you. I do watch your video , when I have the time to. Keep it up. Good day. 😁😁

[@keaty1984]

Would you use these with a machine?

[@ForensicDetailing]

yes mate ideally.

[@kianronnie3619]

Jon I’d love to see Tac systems essential and car pro essence in these tests

[@invadertopak]

Can koch chemie P6 be used as a primer for ceramic coating? The gloss levels are high, and i have P6, and M3 available to me for finishing stage of correction. Thought of using P6 after the M3 with finishing Pad for high gloss, let it cure for some time, ipa wipe and then koch chemie Ceramic coat. Need your help please

[@ForensicDetailing]

No m8

[@invadertopak]

@@ForensicDetailing thank you for clearing it for me ❤️❤️ one more question if you dont mind. Should i order gyeon Q2 primer or Carpro Essence? I need gloss

[@jonnybravo3055]

A stonker means something different in Yorkshire Jon 😂

[@abdulbeany1894]

Hi can i use the tripple on the headlights thanks

[@ForensicDetailing]

yes m8

[@abdulbeany1894]

@@ForensicDetailing thank you

[@hartlanddetailer5670]

For us detailers in the States, the 3D Speed & 3D One (not tested) are very good products, possibly the best?

[@ForensicDetailing]

3d was my favourite just left the car buzzing

[@8803surri]

Really interesting that you rarely cover any Autobrite products? Why?

[@ForensicDetailing]

We do m8 I try and get them in when they have a rated offering, but I tend to consult with patreons on the line ups

[@inspire518]

tripple I got for 17.50 for 1l at Halfords.

[@davelawrence594]

Great video yet again from your good self John but you should do a comparison on the best hand polish as a lot of us who love cleaning cars like me I don't have any polish machines so a video comparison hand polish would be awesome? 😁👌🏻👍🏻

[@ForensicDetailing]

i think ive done this mate. But PVD did the best on this I think

[@davelawrence594]

@@ForensicDetailing Oh OK Mmm I must have missed that review mate anyway thanks for that very much appreciated!! 👌🏻👍🏻