I once had a hilux come in for an All in one polish. I tried using a medium cut waffle pad on a rotary at speed 3. The section was about 5 times the area of the pad, and I had also put on adequate amount of liquid. After literally 5 seconds of polishing the pad and polish gummed up really bad, and the finish was worse than anything I've ever seen. After this I had to really just stick to a very light jeweling polish and a black waxing pad to get some gloss back, and results a typical AIO polish would produce. This drastic jump of pad and polish just goes to show how soft the paint actaully was and I really had to cut my losses on that one with the customer. Any advice on such paint?

Wow!

I just bought a Brera and stumbled on this video, would love to give it this special treatment. I’m in Melbourne, do you offer this service to customers?

I like your sense of humor, & objectivity. I agree with your assessments, with the exception of bead maker, because my understanding is it's in an undefineable category all on it's own. My experience has been, it works best on cars that already have a decent gloss *as that was not my intent in purchasing it. Just one question, why did you include products like Meguires and Mother's that you didn't review in with the 5 you did ?

Hi Sandro. Do you know if Global Smart Repairs are still in business? Their website no longer exists. If not, do you have an alternative you now use and recommend? Thanks

What does it do?

Damn...This video brings me back to the old days of KZbin tutorials. Excellent narration/explanation to go with excellent showing of how-to! No super fancy video-editing and unnecessary showing of the face. Just straight to the point and task at hand. Top top video!

Thanks for this video, Im 17 and started my mobile detailing business in January im looking to expand into paint corrections at some point and this was very helpful. Much Appreciated!

You treated polar seal very poorly. Mix and apply properly rather than championing aussie brands

How many pads of each type should I have available for 1 medium sedan? Thanks!

Your channel has made me the local Mr. Miyagi. Do you still use NV products?

look at other social media of yours

After application, can I use any sealant or does it have to be the car pro reload

so then how do we know or when do we use the white microfiber heavy cutting pad you showed us on the beginning of the video? You used the blue light cutting pad instead, which was paired up with the coarse compound for extra heavy cuts.

Do Milwaukee m12 batteries fit in this machine? The battery shape/design looks really similar…

Megs m21 is the worst ever sealent/paintprotection ive ever tried and i have tried alot. Zero chemical resistance irl and cant handle nordic climate. The polish angel is imo the best high end brand on the market, its not cheap but on your precious its perfect. Daily beater maybe not worth the price. I use gyeon and polish angel for my cars and some labocosmetica products. Great video, i think the gloss readings would be bettet for polish angel high gloss vs the other on a polished panel. Its not formulated as a filler product. Gloss units of high gloss on oerfect polished paint is around 98-100gu.

Well done with this video with all the tests.

Im pretty sure that both Collinite and Meguiars are infused with polymers while P21 is a pure wax. Not sure about Pinnacle but its behavior shows that there most likely aren’t any polymers in the mix. This could explain the different behaviors to the slickness of these four. The Meguiars also have fillers and is not completely comparable with pure Carnauba waxes.

I take it you can use Lustre on a graphene coated car?

Kamakazi to me is overpriced hype junk. NV makes amazing products that aren’t overpriced and do what they’re actually said to do. Right not NV boost is on sale so I took advantage and grabbed a bunch. For 16$ a bottle of a real ceramic coating topper you can’t beat it.

Could you make a review on the w6 black there is very little information about it. I would love to hear your experience with it cause the gloss looks awesome.

Hey mate, do you have an affiliate code I can put in directly on the waxit website? I often place orders and forget to come here for links… and I’m lazy

Can’t you just use a good leaf blower?

I’m curious how long this technique lasts before it starts to fade again compared to the liquid plastic restore solutions that last one through a few washings?

Great looking bike. How did all the upgrades affect the fuel consumption?

Hi Sando! absolutely love your content, always so helpful and clear with explaining your steps! do you have any tips for removing water spots on my chrome/alum trim without a polisher?

I switch between carnuba to the other dont stay with one wax. You can find what you need with Meguiars.

Sonax cut max is the best non dusting compound I've ever used

My Alpine white BMW is indeed, rock hard 🙂 As all hard paint easy to finish even with one step, but boy, even light swirls needs time to work on.

Very nice tool, it’s hard to get here in Central Europe, but here are alternatives like the Chemical Workz Evo Mini with not that much adapters and tools but from some resellers you can get quite a bit more.

Why doesn't anyone test the Supernatural Glass Sealant ??

Does it work with other colours? What is a example of a solution finish? And what température are you using? Heat gun(1/3 power), solution finish, wipe down. Tks so much

I just bought a $2000 car and I'm worried about the paint chips in it. it's the most money I've ever spent on a vehicle. My touch-up looks terrible, there are large areas without paint, not just little chips but your video has been a great help. I don't have a garage, or any kind of cover so I'll wait for a sunny day and give this a try.

Boost Is too good. I also love my electric pump sprayers I got on amazon. it's so easy and quick to foam a whole vehicle because its non stop foam.

TW Polish + sns are the way to go, thanks for removing my doubt about using them together, I always thought I had to remove the ceramic polish and wax to apply the sns

Amazing work in the end!

How would it compare to the flex gear driven xce?

Ok so Compound with medium force then Polish, but if I don't have Polish, could Compound with low force or a softer pad achieve the results of Polish ? I haven't tried yet because I'm new to this and I don't want to mess it up.

Thanks for all your videos ... Did I misunderstand your video or mis reading the below from carpro-usa website? ... it says use Essence not Essence Plus under a coating. Q. Can I use Essence Plus underneath CQUARTZ like I did with Essence? A. No, this is not a primer like Essence is. Coatings will not bond on top! If used in-conjunction with a coating, this goes on top, not bottom.

Hi mate. Just watched your restoration of the seat and it was amazing. I hope to do some car flipping and your channel is a must. Glad you are still posting.

The easy way to get rid of pet hair is a lint brush or roller

Wow I havent seen anyone go so in depth about door jambs. I think I might hand polish and touch up, but not sure if ceramic coating is ott but we'll see

is there a protective layer you should put on after this? for example wax?

Just got you a coffee, thanks for the info. Would you reply to my question in the note attached? Thanks.

Looks like meguiars has got fillers.

Hey Sandro how would you compare this polisher to the PXE-80? I’m about to purchase my first mini polisher and can’t decide between the two after watching your video. TIA!

Agreed on Solution Finish. I usually wait a day then apply Cerakote trim restore on top. Lasts forever.

Hey Sandro, I'm going to be performing a 2 stage paint correction to a family members car very soon. She has a white 2001 Lexus, with defects exactly identical to these. Unfortunately, I don't have any Rupes yellow wool pads, however, I do have their blue wool and their yellow foam to finish. Do you think that coarse wool would prohibit me from being able to achieve a nice finish? I know I can be less aggressive by making fewer passes and going slightly faster than normal for my arm speed. Thanks mate

What do you mean, we have been using tape for years!

I have not used any of these products except the Butter Wax. I agree with you on all points. It feels good, smells good and is easy to use but it just does not seem to make any difference to the finish - I actually went and reread the instructions becuase I thought I must have used it wrong - the finish looked exactly the same as the bare paint. I thought maybe it was just me... Apparently not :)