Best Attachment I made from scrap metal!

  Рет қаралды 20,273

Viny B

Viny B

Күн бұрын

Пікірлер: 162
@VinyB57
@VinyB57 3 күн бұрын
Link to website and plans: 57design.ca/
@yoti-fab
@yoti-fab 3 күн бұрын
Let us know when the snow pusher plans are available. I have a similar Massey and have been wanting to build a snow pusher as well. Thanks for the great vid Viny
@2drx4
@2drx4 3 күн бұрын
Debated building one of these for either my tractor or Bobcat. It definitely works better than mangling everything with the bucket.
@VinyB57
@VinyB57 2 күн бұрын
Sure does!
@FromSteelToWood
@FromSteelToWood 3 күн бұрын
Ça vaut vraiment la peine d'avoir un snow pusher! Tellement mieux qu'un bucket ou une simple gratte. J'adore tes vidéos, ils sont drôles en plus! Merci!
@VinyB57
@VinyB57 3 күн бұрын
Merci merci! J'adore mon snow pusher! 👍
@blitzkrueg07
@blitzkrueg07 3 күн бұрын
I bought the snow pusher for our tractor and love it. Had 8 inches snow and only took 10 minutes with 3 swipes to clear snow.
@VinyB57
@VinyB57 3 күн бұрын
I'm with you 100%! This is the best winter attachment for real! I do love my snow roller tho 😉
@RetiredRhetoricalWarhorse
@RetiredRhetoricalWarhorse 3 күн бұрын
Thanks for the wire brush tip. That's gonna come in handy.
@VinyB57
@VinyB57 3 күн бұрын
You're welcome! 😉
@JesStricker
@JesStricker Күн бұрын
I absolutely love all of your project Vinny. Thanks for sharing.
@VinyB57
@VinyB57 18 сағат бұрын
Glad you liked it and it's my pleasure mate!
@robertpeters9438
@robertpeters9438 2 күн бұрын
Great vid. Informative, instructive, and full of humor. A 10/10
@VinyB57
@VinyB57 2 күн бұрын
thanks for the perfect score! Glad you liked it Bob!
@taztaz6539
@taztaz6539 3 күн бұрын
Nice fabrication and it's environmentally friendly 😊 Good to see old school skills in action
@stuwy1237
@stuwy1237 3 күн бұрын
Beautiful work! I've been using a quad with a snowplow for a few years. There's always room for improvement and more impliments.
@VinyB57
@VinyB57 3 күн бұрын
You're right, you never have enough impliments! 😅
@joebeach7759
@joebeach7759 3 күн бұрын
I love your projects! I don't have a pusher, but a sno-blade and I had a problem with digging up the gravel in my driveway. I ended up taking a 2 in pipe, cutting a grove in it and putting it on the bottom of the blade. Works perfect now. You can play around with the size. I tried 3 different pipes before I found the right one.
@VinyB57
@VinyB57 2 күн бұрын
Hey thanks for the advice mate!
@DerTischlerify
@DerTischlerify 3 күн бұрын
Last Week i find your Channel and i enjoy your Videos. Greetings from Germany
@VinyB57
@VinyB57 2 күн бұрын
Thanks mate! 👍
@DonDomel
@DonDomel 3 күн бұрын
absolutely beautiful ! greetings from Poland :)
@canadaman_
@canadaman_ 3 күн бұрын
Love your work man ! Keep it up, discovered your channel not long ago and I love your style of videos ! I wish for your channel to keep growing ! Love from Saguenay-lac st Jean
@Podpiska_i_laik
@Podpiska_i_laik 3 күн бұрын
Весело, красиво, полезно. Очень динамичный ролик, насыщенный множеством мелких приятных моментов. Они очень помогают несмотря на скорость сюжета проникнуться процессом. Ваши проекты сами по себе очень хороши.
@Tubeagrutis
@Tubeagrutis 3 күн бұрын
Very cool vid, Vinny! Your production is top notch and your content rocks. Keep them coming.
@VinyB57
@VinyB57 2 күн бұрын
I'll try to keep the good stuff coming! 😅
@pauljr4706
@pauljr4706 3 күн бұрын
Damn it Viny! J'men allait dans le garage pour bricoler pis ton video est sorti. Tu stop ma productivité😉
@VinyB57
@VinyB57 3 күн бұрын
Ah merde, désolé! 😅 Bonne soirée dans l'garage! 👍
@keithviolette5870
@keithviolette5870 3 күн бұрын
Another great video and build Viny! Just what I needed to watch while running a long CNC program in my garage.
@VinyB57
@VinyB57 3 күн бұрын
Glad you liked it! Hope the CNC program is running smoothly 😉
@b0rd3n
@b0rd3n 17 сағат бұрын
Belle job vieux, lâche pas!
@cornboy3
@cornboy3 3 күн бұрын
What an awesome build. It needs a trip mechanism though. Backdragging with those cylinders fully extended means that a small lip in the driveway could bend those rods into pasta. A replaceable wear edge wouldn’t hurt either.
@VinyB57
@VinyB57 3 күн бұрын
Well the load is in ''floating'' mode, so with the skid shoes, it should jum right on top of it!
@joshbolding4165
@joshbolding4165 2 күн бұрын
Awesome build!
@VinyB57
@VinyB57 2 күн бұрын
Thanks, I'm glad you liked it! 👍
@gamestudio4429
@gamestudio4429 3 күн бұрын
Really Nice Video Viny.❤❤
@dougdavidson175
@dougdavidson175 3 күн бұрын
Thanks Viny. Merry Christmas to you & yours. Take care & stay safe.
@VinyB57
@VinyB57 3 күн бұрын
Thanks Doug, merry Christmas to you and yours too!
@rjung_ch
@rjung_ch 2 күн бұрын
Viny, I like your tools ;) Bikibooboo had me laughing.
@VinyB57
@VinyB57 2 күн бұрын
You're welcome! Glad you're enjoying the content! 👍
@rjung_ch
@rjung_ch 2 күн бұрын
@@VinyB57 I always go, your humour and great ideas, that's what brings me back each time Viny!
@jayplayzlol8701
@jayplayzlol8701 3 күн бұрын
I have discovered your channel and you not even a couple weeks ago and I love you so much❤ lots of love de l'Abitibi-témiscamingue!!!
@VinyB57
@VinyB57 3 күн бұрын
Hey thanks mate!
@carlosarturoforeroatara1930
@carlosarturoforeroatara1930 3 күн бұрын
I was watching the previous videos again and wondering when you would post the next one. Thanks! "Muy buenos videos" by the way
@VinyB57
@VinyB57 3 күн бұрын
Thanks Carlos! 🤙
@kastamD
@kastamD Күн бұрын
Really nice piece. I will steal some ideas for my Loader build. :) Cool video!
@VinyB57
@VinyB57 Күн бұрын
Please do! It's there to be stolen! 😉
@Silverdust-07
@Silverdust-07 2 күн бұрын
J'aime ben l'ensemble de tes Project et video....drole et simple. Keep up the good work 😎🤙
@VinyB57
@VinyB57 2 күн бұрын
Merci merci! 👌
@trentmunn9486
@trentmunn9486 3 күн бұрын
Entertaining, informative and I still need a tractor first!
@VinyB57
@VinyB57 3 күн бұрын
We all do! 😉 Merry Christmas!
@trentmunn9486
@trentmunn9486 2 күн бұрын
@ Merry Christmas to you and your family. Look forward to your next adventure. Your neighbor in NB.
@snocrushr
@snocrushr 3 күн бұрын
Great Job! 👍👍
@VinyB57
@VinyB57 3 күн бұрын
Glad you liked it! 👍
@deuce454
@deuce454 3 күн бұрын
love it... must have that welding table for a from me to me Christmas present
@VinyB57
@VinyB57 3 күн бұрын
Nice Christmas present! 😉
@lloydmiller5275
@lloydmiller5275 2 күн бұрын
Nice work Vinnie. Love the name 😂
@VinyB57
@VinyB57 18 сағат бұрын
Love the name too...I'll do anything for a joke! 🤦‍♂️😉
@shtboxyj8406
@shtboxyj8406 3 күн бұрын
The important part about back dragging is the angle of attack.
@timd1191
@timd1191 3 күн бұрын
Very good Viny, love it as always! Look forward to the hydraulic leak video, as i have one on my mini excavator I would love some knowledge on how to solve. 🙄
@VinyB57
@VinyB57 18 сағат бұрын
Well...I'l have to watch a few videos myself to find a path to the solution...but 🤫
@timd1191
@timd1191 7 сағат бұрын
@@VinyB57 I figure the valve body must have perhaps a bit too much tolerance, allowing a bit of hydraulic fluid to back flow under the weight of the machine pushing on the cylinders. I wonder if there is a 1 way valve? or backflow preventer maybe? I am not sure.
@mikeakamiky7245
@mikeakamiky7245 3 күн бұрын
awesome build
@VinyB57
@VinyB57 3 күн бұрын
I'm glad you like it
@jeepanimal2943
@jeepanimal2943 2 күн бұрын
Nice idea! I'd try it, but, my snowfalls here West of you, are either 2 or 3 inches, or 10 to 12, plus blowing snow effect. So, it's the snowblower on the tractor or the bucket on the skidsteer for me. And iffin its just an inch or 2, I just drive over it until it packs down, thaws and turns to ice. I find it's an effective way to keep the Amazon drivers away.
@VinyB57
@VinyB57 18 сағат бұрын
Good to know! I don't get it tho...why do your comment has double spaces between each word! 🤨 Never saw that before!
@jeepanimal2943
@jeepanimal2943 17 сағат бұрын
@@VinyB57 Used to type script. Books, short stories, speech. Old habit. Now it's a nervous twitch.
@wheellife
@wheellife 3 күн бұрын
Lol I saw what you snuck in there Viny! Great video - safe holidays to you and yours!
@VinyB57
@VinyB57 3 күн бұрын
Ah merde! I thought I was being sneaky! 😉 Happy holidays to you too!
@OwnerOfOwn
@OwnerOfOwn 3 күн бұрын
wow this is awesome
@VinyB57
@VinyB57 3 күн бұрын
thanks!
@dannyboy7086
@dannyboy7086 3 күн бұрын
looks great
@VinyB57
@VinyB57 2 күн бұрын
Thanks!
@4110mahindra
@4110mahindra 3 күн бұрын
Well done sir
@RyanAUS
@RyanAUS 3 күн бұрын
Make it fun you will Viny B. Fun you will make - Yoda
@VinyB57
@VinyB57 3 күн бұрын
🤣👍
@DatBoiOrly
@DatBoiOrly 3 күн бұрын
Ngl i kinda DIG how you went from a car channel to a tractor channel i really want more upgrdes for the tractor itself though like adding a cooler engine (like a V8) to it
@joppejoppsson9604
@joppejoppsson9604 3 күн бұрын
I think a rear snow blade is better for smaller tractors. You have a better grip on the wheels when the snow is behind. Somehow. I have a rear snow blade and it's working very good with chains on the rear wheels
@bhg00
@bhg00 3 күн бұрын
Absolutely pure entertainment
@shtboxyj8406
@shtboxyj8406 3 күн бұрын
I'm pretty sure you're from frostbekistan(Canada). I'm from New england US. Plows and buckets are still the king. What warm people don't understand is how different the types of snow are to work with. We usually get wet and heavy. I added rubber to my snowblower to throw slush 10yards.
@VinyB57
@VinyB57 3 күн бұрын
Yep I did the same rubber trick back in a day on my old snowblower!
@JaakkoIsWatching
@JaakkoIsWatching 3 күн бұрын
Exactly. On my small yard dry and light snow is just a fun excercise to do by hand, and the rare (over here) wet heavy snow wouldn't go through a small blower anyway.
@jtto6364
@jtto6364 3 күн бұрын
Nice. Next is the snow flame thrower :):):)
@VinyB57
@VinyB57 3 күн бұрын
I'll add that to the list! 😉
@RichardT2112
@RichardT2112 3 күн бұрын
18:03 I almost spat out my coffee! 😂
@VinyB57
@VinyB57 3 күн бұрын
🤣 Sorry mate! 😅
@tonyestvik7969
@tonyestvik7969 3 күн бұрын
Really nice job Viny! And 🇨🇦🥶🇨🇦🇸🇪🥶 yes, we have snow also...but...its not as much as it use to, or Not as freecvently as before if you go back 20 years.... But nice job, have a nice Christmas and Happy New Year and hope you will get more earth saving metal in your stocking, NO COAL! 😜 TAKE CARE!
@VinyB57
@VinyB57 3 күн бұрын
Happy holidays Tony!
@Mr.Engineer.
@Mr.Engineer. 3 күн бұрын
Like your accent and cute small french curse words. Subscription added and comment applied ;)
@VinyB57
@VinyB57 3 күн бұрын
Thank you 2 times mate!
@foxtrot9000
@foxtrot9000 3 күн бұрын
i didnt know it existed, but that is great!
@zafarexilius5223
@zafarexilius5223 3 күн бұрын
time to use some of that steel to make a new steel rack vinny
@VinyB57
@VinyB57 3 күн бұрын
you're right...the garage needs a bit of clean up!
@zafarexilius5223
@zafarexilius5223 3 күн бұрын
@VinyB57 you should make it a project for us to watch :p
@SweedSleds95
@SweedSleds95 3 күн бұрын
Thats's right, it goes into the square hole!
@VinyB57
@VinyB57 2 күн бұрын
Yes it did!
@mr.picklesworth
@mr.picklesworth 3 күн бұрын
I have to ask. What does the 57 in your logo stand for?
@wthomasw2
@wthomasw2 3 күн бұрын
Merci pour l’idée! Mon père s’est acheté un tracteur, et il aimerait bien s’en faire une gratte avec un vieux souffleur qu’il à ramassé! Ma me mettre sur le projet comme cadeau de noël 😅
@VinyB57
@VinyB57 3 күн бұрын
Super idée! Bon projet mon ami! 👍
@robertpawlak
@robertpawlak 3 күн бұрын
Nice video as usual ;) try to use compresed air to clean welding magnets ;)
@VinyB57
@VinyB57 3 күн бұрын
Thanks for the tip! I'll try next time...maybe it will be shop tip number #115!
@yoti-fab
@yoti-fab 3 күн бұрын
That's how I do it to but am going to try the wire brush tip. Thanks Viny
@rusty_restorations36
@rusty_restorations36 3 күн бұрын
In the future You need wider lower v die! then you can bend wider/thicker with less tonnage. Especially when specific radius isn’t really important
@VinyB57
@VinyB57 2 күн бұрын
Yep! I kinda have a home made die that I can insert into my bigger home die. This I was not using the insert, so I was in the wider mode, I'll think about making another wider die!
@rusty_restorations36
@rusty_restorations36 2 күн бұрын
@ typical rule is 8x material thickness. But you can easily do 10 or more to cheat
@fastbunnymetalwerks
@fastbunnymetalwerks 3 күн бұрын
ostie que tu est drôle !!! j’adore ton style de vidéo !!
@Alyvz
@Alyvz 3 күн бұрын
You may be design a wood stove for your garage.Its a new project.
@VinyB57
@VinyB57 3 күн бұрын
Well I just bought 2 giant stainless steel tanks to turn my pool into a giant hot bath! That's for next spring, so in a way, I'll be making a giant stove soon-issh!
@mditty9751
@mditty9751 3 күн бұрын
Awesome build. Im just south of you in Vermont and we havent had any snow but a small dusting. Crazy to see how much you have there. One question- Do you cylinders bottom out when you put the pusher in the drag position or do you still have some room left for buffering in case you hit something solid? Ive been told that back dragging on maxed out cylinders can be very hazardous to seals and pistons.
@VinyB57
@VinyB57 3 күн бұрын
No I still have some room...but not a lot tho!
@DeathTollRacing
@DeathTollRacing 2 күн бұрын
Nioce!
@VinyB57
@VinyB57 2 күн бұрын
Thanks Gavin! 👍
@matej_sprem0000
@matej_sprem0000 2 күн бұрын
Nice video, but you should built a cab for little massey😅
@VinyB57
@VinyB57 2 күн бұрын
I don't know if I'll build a cb for this MF...🤷‍♂️
@darkwinter7395
@darkwinter7395 2 күн бұрын
Snow... yeah, I remember snow. We don't get that here anymore.... something-something-climate-something... 😑
@AD-hr4is
@AD-hr4is 3 күн бұрын
Quebec ou Ontario? Tres bon travail estie.
@hoovercamaro
@hoovercamaro 3 күн бұрын
😮‍💨 well its not a 3 pt hitch 360° Grading blade, but it will do 😎 (you need to go to more Farm/ag Auctions for cheap Implements lol)
@imarobotbeepboop766
@imarobotbeepboop766 2 күн бұрын
next year you can make a salter
@VinyB57
@VinyB57 2 күн бұрын
I mean...I would have the best winter-apocalyptic-tractor-setup ever with a salter!😅
@hothotllywood4192
@hothotllywood4192 2 күн бұрын
A présent j'attends d'autres utilisations de ce tracteur comme transport scolaire, démineur, hélicoptère, lanceur de pianos ... hein ? non ?
@VinyB57
@VinyB57 18 сағат бұрын
🤣 Lanceur de piano...je note! 😂
@OTuit
@OTuit 3 күн бұрын
Hey, what's that white fluffy stuff?
@VinyB57
@VinyB57 2 күн бұрын
Poeple that hates winter, will tell you it's white sh*t! 😅
@jocelynauger1
@jocelynauger1 3 күн бұрын
Becebobo, : ) toi tu es un québécois certain 😄
@VinyB57
@VinyB57 3 күн бұрын
Ahah! C'est békébobo qui m'a démasqué! 😅
@chanelrobert75
@chanelrobert75 3 күн бұрын
Salut! Met un peu d'angle dans les oreilles si tu vends le plan... La plupart des machines vont se jacké sur les oreilles en reculant.. par manque de force completement étiré et de la neige pesante... Pas besoin d'etre à 45degré.. mais 2a4pouces ca comble le flottement... bref! ca fonctionne sur le tien.. belle job!
@OZobboy
@OZobboy 3 күн бұрын
as always funny boy!! :)
@VinyB57
@VinyB57 2 күн бұрын
Thanks! 😃
@mrMacGoover
@mrMacGoover 3 күн бұрын
Just think, someone who would have done this in the 50's would have used oxy & acetylene to cut and weld this mixed with pounding hot rivets.
@VinyB57
@VinyB57 3 күн бұрын
Probably! Not sure I would have the patiente for that process tho!
@joebeach7759
@joebeach7759 3 күн бұрын
Is your wife anything like mine? She either watches out the window laughing her a** off, (Love the name on the pusher), Shaking her head at me, or dialing 9-1 and waiting for something to happen to dial the last 1.
@VinyB57
@VinyB57 2 күн бұрын
🤣 Can I say she's a bit of all 3! 😮🤦‍♂️ But she mostly laugh at me! 😉
@ZaphodBeeblebrox-ry5zs
@ZaphodBeeblebrox-ry5zs 3 күн бұрын
👍👍👍
@VinyB57
@VinyB57 3 күн бұрын
👌👌👌
@danogrimberre2568
@danogrimberre2568 3 күн бұрын
tu travaille vraiment biens man j’adore je sur de thetford toi ?
@VinyB57
@VinyB57 3 күн бұрын
Chus pas loin! 😉
@danogrimberre2568
@danogrimberre2568 2 күн бұрын
@@VinyB57 tes ou haha
@VinyB57
@VinyB57 2 күн бұрын
@@danogrimberre2568 Désolé, ma femme veut pas que je le dise! 😅
@danogrimberre2568
@danogrimberre2568 Күн бұрын
@@VinyB57 voyon juste la ville la pour le fun
@JaakkoIsWatching
@JaakkoIsWatching 3 күн бұрын
I was expecting to hear Salt-N-Pepa - Push It on the background.
@VinyB57
@VinyB57 3 күн бұрын
Shoot, nerver even though about it! 🤦‍♂️
@RCAFpolarexpress
@RCAFpolarexpress 3 күн бұрын
Good Morning Sir 🤣👍You are OUTSTANDINGLY Very Funny 👍👍🤣🤣My Too A Like The Round Skin Surface 🤣🤣👍👍 Ok it is beeeending Now 🥴🤣👍 Yes It is not going into the moon ✨✨🚀🚀🤔🤔 OUTSTANDING Hand WArmer 🤣🤣👍👍 You have Polish the Church Dishes Pretty Well When You Burn Yourself Sir 🙏🙏😇👌🤣👍Keep WArm Sir 🔥🔥👍👍👌👌😇😇🍻🍻
@VinyB57
@VinyB57 2 күн бұрын
Hey thanks mate, glad you liked this video! 👌
@Hellsong89
@Hellsong89 2 күн бұрын
Decent but looks like it wont throw any on the side so needs to push out of the road rather often. With our 30cm in one night, you wont get even length of the tractor before needing to empty and if its wet snow blower does absolutely nothing but jam things in tight. I do like the pull function but its only for machines that have hydraulics, so not really good for ATV and garden tiller type of vehicles.
@VinyB57
@VinyB57 18 сағат бұрын
Yeah, it's for hydraulic loaders for sure, not ATV or garden tiller!
@TailgateGarage
@TailgateGarage 3 күн бұрын
Its Trudeaus goal to save the planet as well! One starving, homeless, sick Canadian at a time is all it will take.
@AlanMyerscough-d2r
@AlanMyerscough-d2r 3 күн бұрын
In respect of the trailer, belt thing...couldn't you just manufacture a continuous belt, in order to save all that rewinding farting about??? Deeply appreciate your channel, by the way! Your sense of humour appeals to me and I am utterly impressed with your extremely heavy project manufacture. Those building a sine bar, or a dinky knife, should take note.
@zombanator3000
@zombanator3000 3 күн бұрын
I thought he had a limited amount of the belt material
@Wannabearborist
@Wannabearborist 3 күн бұрын
1:14 I know some conspiracy theories with less holes as their official stories…
@VinyB57
@VinyB57 3 күн бұрын
😅👍
@maximiliankehler2547
@maximiliankehler2547 3 күн бұрын
The credits rolled to quickly. Didn’t get all the names.
@VinyB57
@VinyB57 2 күн бұрын
🤣🤣🤣🤣 But it was so easy to see!
@hillppari
@hillppari 3 күн бұрын
atleast you arent making the yard an ice hockey rink
@VinyB57
@VinyB57 2 күн бұрын
Don,t worry, I'm not...but the 50mm of rain we just received is! 🤣🤦‍♂️
@elden4267
@elden4267 3 күн бұрын
joublie tout le temp que tes qc
@Bluewolf279
@Bluewolf279 Күн бұрын
LOL whats a snowflake
@VinyB57
@VinyB57 Күн бұрын
Sh*tty things, falling fro the sky! 😅
@steveyoutube1709
@steveyoutube1709 3 күн бұрын
Oh please, 2” of snow Prius with summer tires could drive through that
@VinyB57
@VinyB57 3 күн бұрын
🤣
Poor's man DIY SKYJACK!
24:19
Viny B
Рет қаралды 30 М.
I Create  a Snow Plow for my Tractor
18:16
Mateusz Doniec
Рет қаралды 105 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 14 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 53 МЛН
The Hidden Engineering of Wildlife Crossings
16:56
Practical Engineering
Рет қаралды 63 М.
Every Humvee has a MAJOR Problem. So We Fixed it...
58:50
Grind Hard Plumbing Co
Рет қаралды 533 М.
Kurtis BROKE The Big Lathe AGAIN! 😅 | Apron Gear Repair ⚙️🛠
47:38
Cutting Edge Engineering Australia
Рет қаралды 631 М.
Attempting to Drain our Marshy Fields | Restauration of a Bounded Farm
42:32
Norwegian farm life
Рет қаралды 69 М.
Fixing an UNREPAIRABLE tractor, with NO parts available!
23:52
Building an Electric Bike Without Electronics
13:50
Tom Stanton
Рет қаралды 703 М.
Best DIY DUMP trailer for only 50$
18:07
Viny B
Рет қаралды 507 М.
Setting up a 25 ton press brake
1:00:34
Andrew Camarata
Рет қаралды 361 М.