BEST! Bars Leak Fixes Blown Head Gasket

[@molly18239]

Slapped this chit in my 1987 Camara..which had an internal coolant leak. I bypassed the heater core, took out the t-stat, and follered the directions to a T. Two years later and the sumbitch is still runnin like a top. The stuff worked for me.

[@beeleo]

Thank you Sheriff Buford T. Justice. LOLOL

[@jerryhanson3903]

Depends on the car and how bad the head gasket is blown

[@jerryhanson3903]

@@theeleganttouch replace the head gasket you don't want to use the stuff on this video

[@7777Lace]

@@beeleo 😂

[@7777Lace]

YES

[@rebeccakester9757]

This guy ROCKS! This is 10/1/2019. I want to thank you for your excellent video. My son and I watched several times and did Exactly what you did. Praise the Lord, it is working. Thank you Joseph Frankel. God bless

[@hellohello8556]

Is it still holding up?

[@Mxl100]

​@@hellohello8556 that's what I wanna know

[@denisshaw1]

Thanks for this video Joseph. Just the sort of no-nonsense information (and no sponsor!) I needed. Trying to sell my daughters car when prospective buyer alerted me to the fact that the head gasket had a slight leak (tiny smudge of mayonnaise-like goo on expansion bottle lid, slight white-smoking from exhaust)...I was embarrassed because I never noticed it. Thinking that I needed a £750 head gasket repair I found your video - Perfect! Thanks!... Denis, London England

[@JodBronson]

WOW OMG... It worked, I did it today !!! No more Smokey Tail Pipe and no more dripping Tail Pipe in less than 25 minutes :))))))))))))).... WOW !!!

[@nunyobusyness4875]

@@JodBronson is it still holding up the bars leak fix

[@thomasjefferson2938]

@@JodBronson still no answer hmm

[@tonykessler7401]

Worked on my f150 3 years ago. Truck overheated, oil looked like dirty milk, thick white smoke everywhere, was about to junk it out, threw this bars stop in, and worked. Kept changing oil until it was back to normal. Still driving with no issues.

[@tonykessler7401]

@Hey Now I drained it, then added new oil once, before I did the bars stop. Think I let it run maybe 15 minutes longer than the directions, then let it sit. Pretty much just followed the directions on it. Changed my oil out again the following week or so

[@talknheadz]

@@tonykessler7401I know this was years ago. But did you put the bars in your reservoir tank or did you remove the radiator hose and put it right into the radiator. I have an f150 as well

[@marcocaudillo8764]

TIP: It helps to watch this video at 1.75 speed. Trust me. Thank you for the video it helped me to undertake this process on my Lincoln.

[@austintube]

i did 2

[@atomicdmt8763]

you are SO RIGHT! sound nearly 'normal' save for the jerky motions! ha

[@richardramirez9737]

I tried everything you explained in this video and saved my 1997 Nissan Altima GXE from overheating and head gasket has 210,000 miles drives like nothing ever happened thanks a lot for posting this video 🙏🏽

[@demarques1911]

Seriously?

[@demarques1911]

I been wondering if this really works

[@Yyyyyy5]

@@demarques1911 I’ve had blue devil work for a month then it leaked again so I got more blue devil and this time it didn’t stop the leak at all. My last resort is to try K seal or this. My vehicle is at 200,000 miles so I have nothing to lose.

[@JaPaNeSe_MxD_707]

How is it now? How long did it last?

[@Yyyyyy5]

@@JaPaNeSe_MxD_707 the K seal works great. I will use that product again in the future if I ever need it. The blue devil just isn’t for me I guess.

[@criticalthinker7822]

I wish I had a Dad to teach me skills like that. Thanks for sharing!

[@michaelg.9791]

KZbin is a great dad , for most without one. 🤔

[@Jason-gt2kx]

I used to it too. 1999 BMW overheating, white smoke out tail pipe, and clicking sound on one cylinder. I used this Bars Head Seal and no more overheating, white smoke or clicking sound! I will try to come back to let everyone know how long it worked, but one week going strong.

[@Renee-bk4fl]

How long did it work for you ?

[@wally8820]

I was wondering if you'd be able to let me know how the Bar's stop leak worked long term - do you have any updates?

[@detect9001]

This stuff really works. It did everything it said it would do. It stopped the smoke from my tailpipe, it stopped my radiator from Loosing fluids, it stopped my vehicle from overheating and stopped my vehicle from ruff idling. It’s been over a month and Is running good. Buy the expensive one and follow the instructions. I was surprised it worked so good. 😎

[@JaPaNeSe_MxD_707]

How is it now and what vehicle may I ask?

[@chrisfoleys]

How long did it last???

[@momto7ify]

I used this and it worked . I have a 2001 mercury villager sport that had blew a head gasket. I put this in and it worked well. Took it out today after the snow storm no over heating at all . She also sat for 2 days after the snow. I hope this lasts a long time. Or until I can get a different van

[@rong...5837]

So I added the bars leak carbon fiber head gasket sealer on Monday. Still have a leak. The problem I have is and has been air pressuring my coolant system. Not burning coolant or white smoke. Just air keeps getting in. I bleed it every day. There's been some kind of change but still not like it should be. Will keep you posted

[@billwilson-es5yn]

I've used this product twice in my van when the labeling said it contained graphite. First time was in 2011 after 4 spark plugs became coated with wet combustion deposits. Found gas bubbles in the radiator coolant so was told by a local auto parts chain to use Bar's Leak since the auto repair shops won't use anything else. It worked and held up for 6 years / 15,000 miles before missing, overheating and bubbles in the radiator coolant reappeared. The second treatment has lasted 6 years / 15,000 miles. My '88 Chevy van has around 300,000 miles on it now so recently it went from running great to start/won't idle overnight. Found 4 vacuum leaks that didn't resolve the issue after being repaired so I replaced the 26 year old Duralast ICM. That helped it idle for a few seconds before stalling so replaced the original TPS and IAC. That fixed the problem so allowed the engine to idle for one hour to recharge the battery. The next morning it was back to start/ won't idle. I got it to idle by placing hard paper shims between the idle speed screw and the throttle cam then went to remove the radiator cap to check for exhaust bubbles since the engine was now missing. Saw too many bubbles so am getting ready to treat it for the third time with Bar's Leak new and improved product. I have a small vacuum gauge installed in the dash that showed 20 lbs of vacuum when idling for one hour. The next morning it now read 17 lbs at start then dropping with the pointer waving between 15 and 11 lbs while idling. It did the same thing in 2011 when cylinders 3 & 5 and 4 & 6 had coolant seepage so required non-foul plug adapters to keep the spark plugs dry while idling after adding the treatment. I'll be removing those four plugs to see how wet they are since I kept the adapters with a set of new plugs in the van just in case they'll be needed again. I have the van an Italian tune-up the day before it wouldn't idle in the morning so suspect sustained high speeds may affect the sealant plugs since the second treatment was required after driving 400 miles on the interstate with a full load in back and towing a fully loaded enclosed trailer. At that time I only removed the #5 plug to find it slightly wet with coolant so didn't bother to use the non-fouls. The missing stopped within a few minutes as the product sealed off the leaks. The plugs were new then so left them in to this date since their replacement intervals are every 30,000 miles. I'll remove #5 again to check its condition since it was the worst of the four that was affected in 2011.

[@michaeldoan9456]

My Acura TL 2004 had a blown up head gasket. I bought one of Bar’s head gasket stuffs pouring in the radiator and it’s worked just like magic. So give it a try..you might save thousands of dollars. Make sure you read the instructions carefully before you do it. Good luck!!👍🏻

[@erikochoa5563]

Michael Doan I have the same car, hopefully bars head gasket work fine for me as well

[@JodBronson]

WOW OMG... It worked !!! No more Smokey Tail Pipe and no more dripping Tail Pipe :).... WOW !!!

[@MYKEYSAUTOMOTIVE]

Michael Doan i have a acura cl 2003 what kind of bars leak did you use?? And how much of it?? Did you take off your thermostat??

[@Senorlatulla]

Thank you for that..... it has been a year now, can you honestly say that you never had anymore issues after using Bar's head gasket leak?

[@obe1canobe146]

Is your car still running good

[@grandparolie]

Tony your dad sure made a good video I can tell that he’s a cool guy to spent time with you trying to fix your car take care of your parents. Tony update us on the stop leak. Good luck! X

[@grandparolie]

Tony my bro has a Caddy with the north star engine that blows head gaskets well he tried this stuff and so far so good. Tony update his north star engine in his Caddy is still running like a champ so people this stuff is good on these engines another thing if this stuff wouldn’t have worked the car would have been sold dirt cheap it can also keep your car out of the junk yard.

[@MrCS-81]

Xavier Xavier yes thats it

[@-Will.]

“Okay we’re gonna do a KZbin” 😂😂

[@danielslc88]

hahahhahahahahahaha

[@MrCS-81]

Hahaha

[@unclepoppabanny747]

😂😂😂😂😂

[@beekbeeker2907]

TRYING IT

[@Mxl100]

Old ppl. What you expect 😂

[@STONEYDBEAR]

Thanks for the info. I laughed pretty hard when i saw your license plate wasn't covered after your joy ride. Cheers!

[@Daniel-xq7ny]

Hi. What would be nice, is the give updates years after. Any updates on your Dodge? Thanks

[@rong...5837]

Amen! Wtf happened? Did it work or not?

[@alejandrovalenzuela4262]

This product worked on my 2005 Jeep Grand Cherokee.. I overheated the car and messed it up..bought one poured it in like instructions said and problem solved. Its been a few years now and jeep is still running. So it worked for me.

[@JodBronson]

It worked for me too.. I have a few Videos in my Channel and even updates too. Check it out in my Channel or ask me for the Link.

[@magnumpi28]

SELL IT NOW!

[@JodBronson]

@@magnumpi28 - There are 2 Types of People in this Lifetime... I know what kind of People you are! LMFAO 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@magnumpi28]

@@JodBronson SPAM

[@JodBronson]

@@magnumpi28 - There are 2 Types of People in this Lifetime... I know what kind of People you are! *N!GGA!* LMFAO 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@billytee9747]

how will apply the bar leak without a radiator opening?

[@donjames5761]

i can get behind it sealing leaks i seen these products work. but hmm hows it gonna fix a warped head ? i've resurfaced a lot of heads in my day

[@CarrieEPrimm]

Please someone tell me ASAP what I need to do. A tow truck driver drug my tailpipe, and my muffler as he picked up the vehicle to tow it. And drug it again when he dropped it. Water now pours while started. Close to where the tail pipe connects..he did that twice. It drips at a steady speed whenever it's not started. It pours whenever it is.How should I quick fix. Give some pointers. Please

[@alzeal]

I usually don't like the band-aid approach. 9 out of 10 times I'll crack the head off, get it machined, new head gasket, timing belt, etc. However for my 300k + mile honda element it didn't make financial sense to do a head job as the price for all the parts I can swap with a JDM (uses a timing chain so more expensive). I didn't want to put money into a 300K mile motor. It had a minor combustion leak in the cooling system, I was losing about 2 cups of coolant every couple of weeks. Full reservoir. Drove fine. So I tried this stuff and it worked. No more coolant loss. Ill run the engine into the ground and swap it out when it gives the ghost. So for a newer car I would do the job right, but for a beater this stuff is gold.

[@RedneckMechanicsYT]

I don't usually like all the "talking" But with these products it's VERY HELPFUL.

[@archiehuon9648]

What should I do if it clogged my A/C and heat core ?

[@robertbegatto]

Have a 2003 Ford Taurus with 200,000 on it and that mechanic told me the gaskets leaking I continue to put water in it I tried Blue devil and I tried k-seal neither of them work should I try this and how much should I put in if it keeps being empty when I say empty I mean the the radiator but in my car you just pour into the overflow but I'm losing water I continue to just put water in it watered it because I don't want to leak antifreeze! I haven't tried this yet but I just want to slow the leak down or else stop the leak I'm looking into a new car but the bars leak I hear sounds good

[@sharewithraj]

I am planning to use the bars leak head seal carbon fiber reinforced stuff in my turbocharged race engine… the cylinder 4 leaks a little bit of coolant just have misfire when cold once hot it runs fine but lacks some power.. if it a better way to remove the spark plug and disconnect the injectors in cylinder 4 to ensure it the fix works better? Pls let me know..

[@robertbegatto]

Again my car does not overheat it's leaking from the head gasket and I continue to put water in it should I put the bars leak in also

[@antman619]

So my car don't overheat yet... it has a leak not visible idk yet if I drive for a hour it starts smelling like coolant ....it looses coolant I gotta check every other day .... i changed thermostat but still its been like that almost a year ima use this stuff... see if it works....

[@davidjames666]

Not sure if Chrysler did the same, but i saw a GM video where they recommended the dealerships fill the overflow to the "full hot" line when the engine is cold. This is extra insurance to make sure the system stays full, and air stays out of the system

[@pavellambracht5823]

guys, do you drain radiator before you put Bars in?

[@meradoum3412]

hi how i now how much i put all the car it need only half 17 fluid ounces i have audi 1.8 T E 4

[@joanfavela678]

I like how you took your time to cover plate number the whole video then showed it at the end 👌...😆

[@Wild_Cat]

😂😂😂

[@beeleo]

What's up with the beads hanging from the rear view mirror?

[@chillinwtheenemy]

beeleo in some places people hang things on their mirror

[@Hooverdarnit]

This should work for a blown gasket that's between the water pump and engine block too -- RIGHT?

[@Mxl100]

Is this a permanent fix??

[@pranktards0.023]

Will it stop a leak in the radiator

[@neilconstantino7755]

What if my car (2013 Ford Fiesta se) doesn’t have a radiator cap? And does the coolant reservoir need to be flushed out first or can I just pour it into the reservoir with coolant in it? Thanks!

[@gremlingirl101]

i have a 2001 3.1 gm engine in a chevy malibu...i am not burning anti freeze but its leaking into the oil...i got the milkshake...would i still use this product?..or do i use something i add to the oil to keep water out? is there such a product?...

[@Bigjamez2011]

Let me tell you I recently used this product by the book it did not work well with a 4 cylinder Dodge neon it plugged up coolant passages . Otherwise the head gasket may have been way too far gone for this product . But I have used it once other time and it worked like a charm

[@magnumpi28]

It says it WONT plug up teh radiator???

[@edrosa5079]

so is it still working

[@whooelse9444]

I have an '05 ford freestar & its been overheating for a while. I dont have direct access to the radiator so i guess i can put in via the upper rad hose, correct?

[@alexanderbrown6443]

Does it work if your heat doesn't work

[@yvngearl3037]

12/23/2019 second time I've used. Worked both times... I think it works best if u catch Headgasket quick enough

[@Yyyyyy5]

Would you rather use this or K seal?

[@chall3038]

Used it in my bmw 325 and it totally fixed everything. Great 👍 product!

[@00201804]

How did you do it

[@chall3038]

Teisha Misunderstood no I didn’t have to drain my coolant.

[@JodBronson]

@@00201804 - Follow the instruction on the bottle!

[@JodBronson]

It worked for me.. I have a few Videos in my Channel and even updates too. Check it out in my Channel or ask me for the Link.

[@YadaG1984]

Can anyone help me.. I added this but no smoke from tailpipe.. 😯

[@captainobvious5993]

If you do not have a radiator cap but only an overflow, can you pour it directly into the overflow tank

[@felixrodriguez9301]

Yes. As long as there's flow throughout the engine.. My advice.. It doesn't say to remove your thermostat.. But for constant flow.. I would...

[@margote8072]

What happens if you don't have a blown head gasket and you use this? My vehicle overheated today and i had no heat. I did the check to see what it could be. I felt the main upper hose and they say if it's your thermostat, like if it's stuck, the upper hose will be cold after running for 15 minutes or so. Well, mine was hot, so i'm assuming my thermo is fine. I next checked to see if it was any obstruction in front of my rad like leaves, etc, and it was clear of any debris. Then i checked to make sure the rad cooling fan works after it gets over 190 degrees and it did start, so i know it's not the fan like its fuse. I'm not sure what else to look for that could be causing the overheat unless you have any ideas. Oh, i did put antifreeze (mixed anti and water), but it still overheated and no heat. I checked the oil and it didn't look milky to indicate a blown gasket and the oil wasn't milky under the oil cap. But when the car was overheating, it looked like it was steaming in the middle of the manifold where the head gasket would be, so i'm assuming it's the gasket. So that's why i asked, if it's not a blown gasket, will it hurt my engine to put this Barr's Leak in anyways? Thank you in advance.

[@poiiihy]

coolant is full? check exhaust for steam (hold your hand close to it and feel if it gets wet).

[@margote8072]

@@poiiihy Yes, it's dripping out of tailpipe.

[@poiiihy]

Then you probably _do_ have a blown head gasket that's leaking coolant into the cylinders and outside the engine, but not into the oil passages. Head gasket sealer would probably fix those issues (if used properly of course). I think it overheated because the coolant leaked out and was too low; how much did it take to refill?

[@rrmediacenter2119]

Should I remove all the water from the radiator before adding the product, add the product and add water, or if I just add the product, does the existing water also work?

[@frankjames1955]

why open the heat?? that just adds in the collant with the gasket sealer throgh the core

[@arielrodriguez6980]

How did it hold up?

[@gypsydildopunks7083]

What are you fixing a Dodge Avenger for?

[@stevefranklin8052]

What's with all the head gasket problems on 10 to 15 year old cars. I've never had an engine with a head gasket issue. I have 337.000 miles on my 94 trans am. Engine never been touched. Run fine. Have 268.000 miles on my 86 by Fiero. No engine problems. 156.000 miles on my 68 mustang 289. Engine never been itouched except timing chain in 1979.

[@stevefranklin8052]

@Sam Yaza didn't mention my 58 Cadillac my parents bought in 1960.she just turned 61! I was 1 when they bought it. My mom signed it over to me in 1980. I still drive it around town for the usual errands. Had the engine rebuilt 6 years ago because of excessive blow by, and oil consumption. Kept the original rockers, crank, etc. Runs beautifully now and no more smoke !! Yeah, you're right. I have a new car, 2017. So far at 46.000 miles it's been flawless. I'll take good care of it, and hope for the best.....

[@stevefranklin8052]

@Sam Yaza thx!

[@nocomment7144]

@Sam Yaza Don't forget vehicle manufactures love to use that futuristic space age product... Styrofoam, it's both lightweight & cheap!

[@mikerum8632]

My jeep had a cracked head...put a bottle in and it drives like a champ now!! Sometimes I get sum coolant drips..but that's it! Works 200%%%

[@PrimeZelot96]

Any updates?

[@RnDBMX]

My heater is bypassed what should I do

[@grahanatha8184]

I have a hybrid and it turns on and off the engine every few minutes. Will that screw up the 20 minutes continuous running required to work properly?

[@AltruisticWarrior]

Yes. Put something in place on the throttle that barely raises the RPM so it won't do that. Some cars have the ability to disable that feature including putting it in sport mode if it has that.

[@Ken-m4x3c]

Put the car in maintenance mode and it won't shut off

[@tank5062]

What about valve cover gaskets

[@tomaiken8026]

I don't usually comments, but nicely done. To the point. thanks!

[@robertjenkins1565]

Yes! It does work! I put some into my radiator completely sealed my leak or leaks in my cooling system. My engine is running beautifully and no longer leaks or overheats.

[@thomasjefferson2938]

Is it still working good

[@robertjenkins1565]

@@thomasjefferson2938 Absolutely! 6 month's now, still working great!

[@thomasjefferson2938]

@@robertjenkins1565 cool thanks for the reply

[@JodBronson]

@@thomasjefferson2938 - I did it last year.... My Dad drove over 10,000+ Miles... It's still going strong! I have several Video in my Channel about it and also I will make a 1 year update Video soon!

[@JodBronson]

@@robertjenkins1565 - Glad I am not the only one... My Dad have over 10K since I did it, it's still going strong!

[@inemm]

So what test did you use to confirm the problem leaking head gasket? ... and will the stuff seal intake leaks?

[@stephenhunt6253]

What keeps this stuff from gumming up the radiator?

[@rickeystovall7547]

Antifreeze !

[@JodBronson]

Use 50/50 Antifreeze... Less Gummy!

[@chrissalinas5657]

how long did the car last ....

[@atomicdmt8763]

2023 and it seems this product is still THE BEST - for the price.

[@martellaugillard4505]

Will it still work with a car without a heater core

[@curtisrich7372]

I'm curious what the "guarantee" is lol If it doesn't work and your engine blows, then they'll send you a check or visa gift card for $50?

[@cyberedwing]

lol😂

[@renostubbs6348]

Brilliant presenation guys,thank you.

[@hunter6099]

But will it stop up the heater?

[@JCMFix]

Nice breakdown.

[@isrealperez9069]

So how long has it been and still work

[@rockandfound]

I just did it let’s hope it holds. Thanks for the video guys. Probably saved a ton of money.

[@JodBronson]

It worked for me.. I have a few Videos in my Channel and even updates too. Check it out in my Channel or ask me for the Link.

[@Emma-dh1lx]

How did it hold up?

[@rockandfound]

@@Emma-dh1lx it was the best product I’ve used. Literally followed the directions and then two days later drove from AZ to AL with no issues and no leaks.

[@Renee-bk4fl]

I’m def gonna use it, cus I can’t afford a new engine fix or car. I’m catching it early, just seems to have combustion gases in coolant. No white smoke or mixed coolant with oil yet. Does slowly overheat. So I’m gonna use it cus I need this car to last me a while. How long did it hold up for you ?

[@rockandfound]

@@Renee-bk4fl still holding

[@ebonflowfitness-dancefitne2923]

Does anyone know if you can use Bars Stop Leak multiple times? It was applied to my vehicle and it stopped the white smoke immediately…. However that lasted a few hundred miles and now the white smoke started to return. I just need the get the car up and running for another week so I can get it in the shop for repair. Thanks I’m advance to anyone who can help with this question!

[@biglo9889]

Usually your oil will be milky. Have a question do you need to get a oil change afterwards? Anybody know?

[@melinuptown]

Arlie Hopes y obviously

[@Druunah69]

Once the leak is repaired, change the oil.

[@garywilcoxson520]

Thank you, it's working like a dream! GOOD video

[@GeoCEarth]

Stuff actually saved my 2001 tundra. 1,000 miles from home and saved me $1500 10/10

[@Yyyyyy5]

Yeah, I don’t know weather to use this stuff or K seal. What do you think?

[@GeoCEarth]

@@Yyyyyy5 I would recommend Bars leak, worked just as advertised

[@Yyyyyy5]

@@GeoCEarth ok, just used blue devil stopped the leak for about a month. So I used it again and it didn’t stop it this time at all….and it is a very small leak. Time to try something else. I’m not going to take it to a Mechanic when the vehicle has over 200,000 miles on it. The repair would be worth more than the vehicle. Thanks.

[@Kingpettylabelle_official]

Do you need to flush the radiator? I have oil in the coolant reservoir. Does that need to be cleaned out first?

[@gregorytimmons4777]

Dianne parker Yes

[@hyukki]

A question: Did you have problem with head before using this product? In other words, did this product help with heating problem? Thanks

[@bendy1808]

My car was over heating for no aprent reason checked every thing rebuild entire cooling system so just drilled 4 /6.5 mm holes in thermostat fixed this problem the temp went down 30 degrees farenheit hight thats 6.5mm is about 3/8s thats 4 holes try 3 or 4 holes just on edge of round part that opens and closes .

[@nunyobusyness4875]

You have to read the wording on the directions carefully it clearly states will not clog up a CLEAN heater core. So I highly advise to do a backflush on the heater core and flush the radiator this works best if you pull out the thermostat after you reassemble use mix sealer with distilled water although it does have a lower boiling point if you can afford to run antifreeze with it maybe that would be could also but make sure your cooling system and heater core are flushed and thermostat out. Also you can bypass the heater core while the sealant is in it and reconnect when you drain it out

[@drewmichael4014]

Nunyo Busyness The manufacturer says to leave it in! EDIT... updated 01/23/20.... 165 miles have passed since adding Bar’s Leaks Seal to the radiator for blown head gasket. Prius still throwing out lots of heat when 15 degree F outside and no more check engine light or engine shaking.

[@bigmoneymillionare]

You don't drain this one it stays in the car forever me boy. It's good stuff.

[@nothingfree3524]

tryed this stuff on 96 honda accord and yes didn't seal head gasket but sure plugged heater core!

[@mikefriedman5635]

what's the difference between this "REPAIR" stuff and Bar's Leak's "FIX" stuff? Anyone know?

[@mikefriedman5635]

@Hey Now lol.no. but whatever i bought actually worked!

[@RD-nu8sg]

How long did it last?

[@phinemgraphix2487]

Can it work on a mazda 3 2005 model and do I pour it in the tank where I usually pour water?

[@MNWILD43]

🚌 Bus

[@rca076]

Hello Joseph. I just watched your video. My '01 4Runner has a bad head gasket (no overheating, no white smoke and no coolant in the oil). I'm getting a misfiring code and I took the car to the mechanic and said it was the head gasket. Anyway, you did this video in 2017 and my question is,, are you still driving the car with no head gasket problems (it's been 6 years or so)? If not, how long did this product have your car running for? Thanks

[@daryllacerna801]

hi my friend,does bars leak really work?

[@nomakulit]

Bro, I am about to flush and change my coolant. I'm using Prestone antifreeze coolant. Can I use this after changing my coolant or should I do this before I change my coolant? Thanks a lot bro!

[@AhJodie]

Did it work for a long time?

[@hgaquest2009]

This product works good enough for me. However this is the third time i'm going to use it and the 1st time last: 6months and the 2nd time last me about 11months and now it's due to do it again.✌

[@johndoe6047]

Did u use regular or professional bars

[@hillbillybackwoods]

So a year and 5 months and you STILL didnt fix the MAIN problem.....LMAO.

[@nadimabu-zahra2913]

yeah mine same thing. i idle 20 min and run heat on, and no issues lasted 9 months due again

[@meradoum3412]

what about 3 rd time

[@alexthebest1401]

Blue Devil sealant?

[@matthewhumm7861]

What does it taste like?

[@demarques1911]

😂

[@ozkuz4321]

Bleach

[@Pionezza]

Why no one puting links where to buy this things????

[@GavinJLang]

Because you have Google.

[@MrSimmer17]

My radiator won’t take in the bars. Only lets me put in a very little before it will start to overflow.

[@GavinJLang]

Then take some coolant out... Lol

[@secondmanup]

I’m looking at using this to keep my gf from spending 40k on a new Tahoe. Went in for a water pump. It was discovered exhaust in the coolant. My question. Do I need to fix the water pump first for the bars leak to work? I guess I don’t want to toss 500 for a water pump then try bars to discover it didn’t work.

[@mrhyde503]

You would definitely want to have a functioning pump to make sure coolant is circulating properly so the repair substance gets to the heads and can do what it's intended to do.

[@q-bert6454]

Can you smell antifreeze coming out the exhaust

[@dyonholmes3906]

I'm excited to hear about this product but in my unique case, I've got blown head gasket but my ford pinto engine is on a Rail Buggy!!!! Which means I don't have a heater, which ever video suggests its a critical to run the heater on HIGH!!!! Can you advise or offer recommendations ????

[@AltruisticWarrior]

That's mainly for circulation through the heater core. Even better that you don't have one, one less thing that could get damaged by the sealant potentially.

[@1hard2findbro]

I wonder how long the fix lasts.

[@Yyyyyy5]

They are supposed to be permanent.

[@josepeixoto3384]

is it the truly *miraculous* sodium silicate? if it is,it is not only meant for bad head gaskets, sodium silicate really *CURES* cracked cyl.heads; i have a car ,Opel Monterey 3.1 TD -1994, running fine for 8 years now with a cracked head,in all 3 places between the valves,towing boat trailers with the AC on,repaired with that sodium silicate (forget the brand,they are all the same,more or less...).

[@billt7283]

Thanks guys! Appreciate the vid. Gonna give this a try

[@HDDIYs]

is this better than steel seal

[@inemm]

This seems more like just a plain product advertisement rather than a proof-of-concept and that it does actually work

[@nothingfree3524]

inemm ,

[@inemm]

@@nothingfree3524 What?

[@inemm]

No Reply?

[@denbighbrown8682]

Are you pouring it in the radiator or the overflow?

[@lucaspukas7757]

Denbigh Brown in radiator