Best Budget Vinyl Cutter For Starters | Vinyl Systems Specialist 28" - Heat Transfer Vinyl Cutter

[@HustleNinjas]

Specialist Vinyl Cutter: bit.ly/heat-press-nation

[@conniehard9145]

what htv are you using on this shirt?

[@ridwanomar5351]

@@conniehard9145 sisser 15 inch roll

[@conniehard9145]

@@ridwanomar5351 THANK YOU

[@iGEAUXHARD]

Rich, nice informative video. What brand and style is the t-shirt you used?

[@MainStreetConnection]

@hustleninjas Nice! I’m thinking of starting out small with a 12x12 silhouette cameo. I’m a beginner but I’m a graphic artist so I think I can nail this! Do you think it is wise to start small then graduate to bigger vinyl cutting?

[@ThreeCsApparel]

WARNING to everyone looking at starting with one of these, for best results don't use on carpet if you have to, try to ground it with a small metal wire from the base of the cutter to the leg of the stand and try stand it on cardboard etc don't use next to curtains or anything that will create static as they hold static and will destroy your vinyl while cutting, as the staic builds up when cutting the cutter will go off like it has a mind of its own and will cut a stright line anywhere! just wanted to warn people if this is happening to them, other than that they are amazing for starting out! ebay have them for around £160 if you are from the UK :)

[@HustleNinjas]

That’s crazy! Because I’ve only had this happen once some years ago and I’ve always wondered what the issue was... appreciate that advice!

[@ThreeCsApparel]

@@HustleNinjasI also found if you try to use the pen tool on the plotter you MUST make it a draw line in the program and set to draw or when you go to test, all the design will be out of sync and not be stright corners, learnt the hard way, but after alot of research i found it was static build up for why the needle does its own thing, but so glad i can help put some light on the issue! Love the channel and work bro keep it up!

[@deablaze6213]

@@HustleNinjas learning something new everyday

[@emryskle]

Great comment. I am in Europe, where can I find this? I didn’t find it on Ebay. Help is appreciated!

[@LilPopeye]

@@emryskle AliExpress

[@gregdee530]

I'm looking at a 28" Vevor 720i (not a huge brand selection in Australia) which looks very similar and runs the same software, intended use is for vehicle lettering/decals and my own Business's branded shirts. I've watched plenty of videos thinking and hoping it would run whatever lengths through off roll stock, any channel I've asked says "should be okay and do it". This is the first channel to mention it can, so much appreciated for your time to review in full.

[@cali_grown]

This just came in the mail today. Just got finished setting it up. Got the pro software which bumped price from 400 to $520 cant wait to start cutting vinyl. Heat press is coming next week im stoked to say the least 😁

[@carolinablueee4406]

How things play out so far for you man? Curious to see how it’s going, ordered my setup the other day as well🤞💰

[@cali_grown]

@@carolinablueee4406 got a hpn signature series hat and label press 2weeks ago and thursday the 16x20 signature surepressure heat press is being delivered im so stoked 👍😁

[@KNIGHTMARE_706_ENT]

I really appreciate that you didn't fly through this video you made my nerve wrecking decision making very much easy now because I was between this cutter and the cameo/cricut cutter and since I'm starting a clothing brand I know now this is the best way to go..thanks brother

[@Leadership_matters]

How's it working so far?

[@RishMedia]

Been trying to start out my brand, wanting to source and do production for myself to learn and cut costs. Your videos have been amazing help, continuing trying to understand everything and see what my best bets are!

[@keanochi9899]

Finally about to start my clothing company, & let me be the first to say you have been very very helpful with all of your videos. You've got great energy man. Godspeed #OneLove

[@BruceLeef]

#facts #respect 🥷

[@sadiemariealonzo1872]

Where did you get the heat press that also does the neck label and heat press shirt same time the make model of heat press.

[@M-Con]

This is such a great vid, Just seeing you all psyched on your shirt is getting me psyched into investing into my own printing methods, instead of using suppliers.

[@FunkyCowboy714]

Can I print & cut with this machine or do I need the upgraded contour cutter

[@youngflamez4206]

Is a Cricut cutter worth purchasing?

[@johndoekobe5619]

Wanted to ask what vinyl cutter you recommend. This one? Or I've seen a lot of sites place the cricut maker 3 as #1 and it's 400$. Any recommendations? Thanks for all your help man

[@jahkellynmusic]

Hey there, was wondering what you have the vynl cutter settings on, having issues finding the right speed and force. Any advice would be appreciated.

[@supersaltlee7657]

Whats the difference with the pro and this one?

[@billkirkpatrick6261]

Boom, you did it again. This was exactly the information I have been looking for starting out.

[@Trentgoodlum]

Nice info. I’ve been using plastisol transfers but have been thinking of getting a cutter for making special color orders and samples for photoshoots.

[@mistatig]

i might get one of these. need something more than a 12" circut.......oh wait i have a cameo now too.....

[@ThreeCsApparel]

Always checking your channel for new uploads man! love your vibe and style and helps me be motivated with my clothing brand! love from the UK brother!

[@johndoekobe5619]

Would you prefer this heat press or the Wala heat press both about 4-500 dollars

[@HustleNinjas]

Honestly, they're both about the same... I'd say it would just be a color preference comparing the two

[@yg3rdspider]

I want to commend you on the quality of this video, very nice and informative

[@hwrida]

Buy the next one up, The Edge model because it has the eye to read registration marks. This unit he's reviewing doesn't do that.

[@hammertoe00]

I was thinking about getting the edge or the specialist. I have enough in my budget to get the edge. I'm just wondering if the upgrade from the specialist is worth it.

[@hwrida]

@@hammertoe00 if your gonna be doing contour cutting it is. The Evo of course is best because of the servo motor. I've had my Edge for about 3 months now and I love how much faster it cuts and bigger jobs I can do over my Cameo 3. I still do use my Cameo though at times. Something to keep in mind. You will want to buy another blade holder so you don't have to swap blades from when you want to cut thicker HTVs

[@hammertoe00]

@@hwrida a blade holder? Sorry for asking dumb question. I'm very new to the game.

[@hwrida]

@@hammertoe00 go to heatpressnation.com and search "Blade Holder" . I know other people sell them but I would just rather send you to where I know if you search something that's going to come right up

[@ayo2315]

What does that mean ? I’m new to all this as well

[@johnnydank]

So I started my clothing brand “trapparelrx” on Instagram, but I’ve been paying people for DTG printing. Now I’m thinking of new ways to make them my OWN at home and your channel is by far the best! Thank you man, keep up the grind my ninja 🥷

[@vanh2140]

Love your vi actually helps out instead talking talking with no actual information. Trying have a female Cambodian brand

[@gentlegnt]

Question: Does it matter the material of the t-shirt (100% Cotton or 50/50 blend or 100% Poly, etc.) if the vinyl will last longer? If the technique and pressure on the transfer is still strong and consistent, does the substrate material make a difference on the longevity of staying on the shirt? Or how bright the print may be? Thanks so much for your time and these videos.

[@ThatzUneek]

Oh Wow. am I still able to use my silhouette software with this cutter? Thanks for sharing

[@DeckDaHallsProductions]

another awesome video!! thanks for the inspiration and constant laughs rich 😃 we luv it when you say" togheder mudher broder" 🙌🏽🙌🏽🙌🏽 we luv how authentic you are on camera and how you can laugh at yourself. It helps us get over our fears of imperfection on camera Keep up the great work brotha🙏🏽

[@nirashatekanayake554]

What brand is the Tshirt you used? Love the quality. Thank you

[@johnnieray2423]

Just was wondering if that will also cut a transfer that you printed on transfer paper like the cameo if you understand what I mean....and if so maybe you could do a tutorial.. I was just about to buy the cameo to add to my arsenal but maybe this one will be better 4 me

[@ClownfishDepot]

Which machine did you get?

[@dandee28]

Hey bro, do you know if this cutter works with versaworks?

[@macxacexdidthat]

What’s your pressure and speed settings ?

[@blackdrop3844]

can you print stickers on them ? i never had one ....and can you print stuff on shirts ?

[@HustleNinjas]

You can cut decal stickers and cut vinyl for heat transfer shirts but you can’t ‘print’ them.

[@TheHmongboi03]

Can’t wait for my Only Ninjas 🥷 shirt to come in.

[@SwagkiddTaylor89]

does these vinyl cutters come with the tools to assist you with tearing away the part you don't need once its cut?

[@shoptalk2238]

You can pick those up online or at a michaels

[@goon4696]

It’s called weeding so you can just look up weeding tools and find them anywhere

[@jesusxandres]

Im on the fence about this one and the cameo 4 plus as they’re both the same price, what would be some differences if you can point them out please

[@mistatig]

cameo 4 plus is 15" cutter, this is much much wider. once you start using it, you will appreciate a cutter that can do 20-24". you can more designs at the same time.

[@Diiverse]

The software on the cameo is more user friendly and adaptive. I have both systems. I mainly use my cameo now. However for bigger or multiple cuts for bigger orders I use my plotter cutter. Depends what you want to do tbh.

[@ClownfishDepot]

@@Diiverse Can this one cut out certain shapes I make?

[@trecomedy3532]

how do you make a white design on the transfer paper i’m having a really hard time

[@dondotta1113]

It doesn't matter the color u design as long as u cut it out on white vinyl

[@gregoryfoster7636]

Thank you for the video! What kind of heat press is that?

[@HustleNinjas]

Budget Heat Press to Start Your T-Shirt Business - CraftPro Heat Press Nation kzbin.info/www/bejne/iZWvl5uvj9JlqK8

[@Zhainius]

Can the vinyl cutter not cut it off straight? seems weird to have to use scissors to cut off the result when it's a cutting machine ;)

[@dondotta1113]

Was thinking the same thing

[@Diiverse]

lol ye. The cameos have that feature. Probably more expensive cutters have it

[@dondotta1113]

@@Diiverse I'ma have to karate chop cut it SpongeBob style 😭😭😂🤣🤣🤔

[@agarrison0104]

Hey rich...whats your take on the Cricut Maker?

[@SarahKane247]

Hi Rich! Thanks for another great video. I am having difficulty finding any Vinyl Cut Plotters that work with Mac iOS. Do you have any recommendations?

[@HustleNinjas]

Graphtec

[@arturom.4084]

What printer would your recommend for heat transfer with 1000 dollar budget just for the printer? Thank you for your videos they help a lot.

[@deablaze6213]

Damn bro you must have been in my thoughts I have my heat press and literally looking for the best cheap starter vinyl cutter much respect from Maryland salute keep doing ya thang 💯

[@BruceLeef]

Debating on this or the cameo 4 pro.. this one looks legit 👌

[@comeupmove]

That shirt came out 🔥🔥🔥

[@jesusxandres]

hey man, is there a way to run the programs for this vinyl cutter on a mac? im assuming you just use a windows computer but i saw you also had an ipad in a recent video?

[@stohlenttv]

I've been looking at getting one of the vinyl systems cutters. According to the HPN website, the software is Windows only.

[@jesusxandres]

@@stohlenttv yeah i think so too, thanks for the reply man! its tough, i mainly use apple products so having to get a laptop outside of that is gonna be new ya know

[@stohlenttv]

@@jesusxandres I feel ya. I'm mostly a Windows person, so the big hurdle for me is going to be learning how do operate everything properly.

[@HustleNinjas]

You could look into running boot camp so that you could run windows on your Mac, not 100% sure if it’ll work though.

[@jesusxandres]

@@HustleNinjas appreciate the info man! love the content, been a ton of help, you’re awesome to watch!

[@pinda0020]

Could you do a video on how to reduce heat press marks on dark shirts?

[@dondotta1113]

Maybe a Teflon paper something to cover it

[@pinda0020]

@@dondotta1113 already tried that, lowered temperature and pressure. Still leaves a mark

[@dondotta1113]

@@pinda0020 I would call wherever u got your heat press from and ask.. are u using a laser thermometer to check the temp it could be way off burning it

[@spaceboxingcom]

Una vez , planchado, con un pulverizador de agua...le das un poco y con las manos frotas lo quemado y desaparece

[@mikeblanding8092]

I love the free game you are giving up bro thank you

[@kingjeffishere]

Thanks for another great vid. I'm one that finds it hard to switch to another brand of equipment once you've pretty much mastered it. Instead, I tend to go with the upgrades of the same brand. However, i feel a little more open after viewing this vid. Keep em coming!

[@IamAlexAdhepeau]

what kind of computer are you using? MacBook?

[@gillesbrassard355]

hi thanks for the video, is it possible to make a 2 or multi colors print with the vinyl cutter?

[@HustleNinjas]

Yes, but you will have to layer it

[@gillesbrassard355]

@@HustleNinjas thanks for replying, i m looking at the moment all your videos, do you have one with multi colors print?

[@marypleasant4135]

I love the information being given but I have a suggestion for more content. Could you produce content about the business aspect of the t-shirt business?

[@parrisound]

Can this cutter be used for print and cut?

[@ClownfishDepot]

Did you ever find out the answer?

[@duckserzzz7777]

What type of vinyl do you use and do you recommend is the best to using that is good enough to stay on the shirt longer?

[@ONEMusic801]

Heat transfer vinyl is what's used for clothing, the other kind won't stay on clothing for long.

[@markjones3030]

Thanks for the video! Can I get help with left chest logo?

[@comeupmove]

Is that Only Ninja font Madina Script?

[@chrismcinnis7343]

You should get a easy weeding table, so you don't have to keep putting it on the heat press

[@flexstarmedia6645]

Is color the same process?

[@T_ROLLA_DACOLDEST]

Bro that t-shirt turned out nice🤞🏿

[@07badassrocky]

is the software compatible with a Mac laptop/desktop ?

[@WayneRigley]

would be nice if they would ship that printer to Canada !~ were stuck with crap here ! Awesome videos man!

[@CHENOTV]

Do u have any videos on setting up shipping? It’s so confusing

[@vanh2140]

Watching all your videos

[@savitar_x3516]

Where can I purchase the vinyl? Thanks for all the info.

[@ridwanomar5351]

What brand is that.

[@Jessie5889]

Is any of the vinyl available on Amazon?

[@ONEMusic801]

Yes, you can find all sorts of different vinyl types on amazon. Good deals too.

[@groveacademy5532]

I have that same heat press...I love it.

[@larounds9155]

What heat press is it?

[@Robbyrevz]

So sick bro, from beginning to end! Thank you!

[@yasminetoeava6464]

Is this different to the normal vinyl cutter ?

[@HypeStadium]

I see some vinyl cutters where you have to flip the image when you print, and some like the cricut where you don’t flip the image but need to put on heat transfer paper. Is this due to the cutter used or due to the vinyl used? I’m so confused why I see both of these.

[@akaghost187]

Thanks for the info. Man just order one. Can’t wait to get to work

[@trishdavis274]

love the shirt💜 awesome vid

[@mistatig]

appreciate you man. brother man dropping gems.......

[@qwiggzz1760]

Richhhhhh, DO you knwo any canadian custom heat transfer comapnies, Because I dont wanna pay USD since im based in canada

[@SouthbayCreations]

Hey Rich thanks for the videos! Appreciate all you knowledge you share with us! Jason

[@rickydisdat2642]

Is this cutter only available in the US? I’m from AUS & interested in buying one

[@jimmyfrmdanorf8270]

I was wondering if you can print from Adobe illustrator from this vinyl cutter?

[@dirrtyfurby]

You can convert from Adobe files to vector but the software has to sync with cutter. Cant print directly from illustrator

[@jimmyfrmdanorf8270]

@@dirrtyfurby thanks for that I’m going to try that

[@patricktawar8454]

just wondering, is it possible to cut files which have registration marks?

[@elleseculare390]

Does it print color designs?

[@fernandolanderos4600]

I been looking at a Cameo 4 pro but they always sold out. I use illustrator and photoshop for my designs. Will this be just as good? Thanks

[@ClownfishDepot]

What cutter did you get?

[@Ramellosugahill]

Bro does it contour cut?

[@HustleNinjas]

Not too sure, doesn’t say so online. Looks like the next one up called the edge does contour cutting.

[@Ramellosugahill]

@@HustleNinjas sounds like a plain

[@SHARPZCO]

Does this work with Mac?

[@EmilsanP]

Does this cutter do “contour cutting”? I’m not entirely sure what contour cutting is, but I’ve heard that’s what I need to be able to print something and cut around it. Can you please touch on this?

[@ClownfishDepot]

Can it do contour cutting or print and cut?

[@dcgraphics3543]

here in the Philippines , we got cuyi, cameo and i-transfer

[@lordbuckethead2022]

im in australia bro and im starting a fragrance sanitizer spray business. i want this vinyl cutter but i cant find this in australia. can you recommend one i can get here man?? happy to donate to support you man

[@LilPopeye]

So, you've set the media width from 24"to 15" and after you've adjusted some "properties" the media width was back to 24"...?

[@spanishjo4282]

Your life can make a lots of money but you must do good righteous job!

[@michaelbrandxn]

Do you know any good vinyl cutters that are compatible with Mac? I'm finding that most vinyl cutters are only compatible with PC.

[@Burley_Pepper_Co.]

I don’t have a PC. I have IPads. What is the cheapest pc i can get away with or are there programs for IPad?

[@firasalouini1870]

dude, where i find black like the one in the video

[@turdferguson-]

Can you cut puff vinyl with this?

[@HustleNinjas]

Yes

[@lyndenramsey2949]

great video, straight to the point and loaded with info !

[@JustSaytheWordLLCGINAGIL]

Brutter... Mutter... you're too funny! Great video! Is this a servo motor cutter?

[@eanyarbrough9734]

That shirt turned out dope!🤑

[@sabrinahalley2516]

Awesome work! Who’s company do you buy from for shirts? Thanks! Sabrina

[@HustleNinjas]

Alphabroder, sanmar, ssactivewear, jiffyshirts

[@sabrinahalley2516]

Hustle Ninjas Thank you for reply, have a great day!

[@kordells5501]

Is there a place I can buy this cutter from a location instead of it being shipped

[@offtheporchnoledge164]

What heat press did he use in the video ?

[@HustleNinjas]

Budget Heat Press to Start Your T-Shirt Business - CraftPro Heat Press Nation kzbin.info/www/bejne/iZWvl5uvj9JlqK8

[@yvetteg]

It is a little too big for the space that I have. I need one a little smaller.

[@HustleNinjas]

Maybe the Cameo will be better for the space

[@yvetteg]

@@HustleNinjas Awww... I have heard about the Cameo. Will be looking into it. Thanks, Hustle Ninja!

[@Closedbyjoe]

What kind of blank t is your shirt

[@cellstcgarena8855]

Can you cut straight from Adobe illustrator with this

[@HustleNinjas]

Not that I know of

[@cellstcgarena8855]

Damn alright thanks man

[@shemar3572]

@@cellstcgarena8855 might have to save as DXF in a zip file or something and open as DXF

[@emergencymedtech56]

How’s the software he used? I’m very computer stupid lol but I want to start doing this. Has anyone try it besides him? He did say the vinyl cutter came with its software right? Thanks in advance 🤟🏽

[@rodhunter111]

thx for the game bro.. appreciate it!

[@ricopearson2588]

Is this compatible with Mac ?