BEST CAMMED SILVERADO EXHAUST SETUP? | BTR Truck Norris Cammed 6.0 LS

Today I wanted to give y’all a quick run-down on my exhaust setup since we’ll be changing it up very soon. Let me know what you think of it in the comments and what you’d like to see on it next. Thank y’all for 9k subs and 10k is right around the corner.
My socials:
Snapchat: / lcekmacb
Instagram: www.instagram....
TikTok: www.tiktok.com...
LGBillet:
www.lgbilletus...
Austin’s Channel:
/ @obs.austin
Tags - #lifted #obs #truck #chevy #cateye #mud #mudding #mudtires #offroad #offroading #trucks #showtrucks #truckshow #truckmeet #26x16 #fts #kg1 #americanforce #lift #liftkit #exhaust #straightpipe #liftedtruck #liftedtrucks #squatted #squat #squattruck #squattrucks #squattedtrucks #toyota #mudgrapps #38s #bubba #bubbatruck #bubbatrucks #kg1forged #libertyforged

[@Jordan24v]

Be sure to like and comment‼️ Thank y’all for 9k

[@johnnywest1735]

The dual exhaust tips is definitely a gasser thing , always felt like the single only belongs on diesels but the truck sounds good no matter which one you stick with 🔥

[@Jordan24v]

I agree, I think the single tip looks good since I’ve got the longer 2500 frame

[@l8tapex]

I did mine couple years ago. They said you can use stock TC. I guess so, I have mine in still but I'm sitting on the brake firmer so it doesn't surge is PIA. This cam is as advertised. It is in my 2500HD WT (LY6) for towing. Eaton Truetrac. I dont recall dyno numbers but I know we didnt put it on the edge with respect to timing and because Im towing loaded 26 ft trailer with car and can not control fuel types around the country. Truck itself is like 7000lbs. Excellent purchase!

[@nicoalvarez1583]

Go straight pipe and let that cam go crazy🤟🏽

[@devinritchie9727]

Full 3 inch straight pipe with a 3 to 4 inch split tip out at the stock location

[@damonrobinson4281]

You could do a y pipe straight pipe to keep a single exit exhaust and it wouldn’t clap as much as duals. Or what I would go with is just true dual straights with 4x18 angle cuts exiting right under the rear bumper under the bumper steps. The end of the exhaust tips aligning right at the corner of the bumper it will make the sound travel further as compared to them just pointing straight back

[@COLORADO__SUBURBAN]

Single exhaust, sounds much deeper and cleaner than true duals or y-pipe duals.

[@ryleehyslop1099]

I have a single cab, short bed Silverado I did a 6.0 swap and the truck Norris cam, with long tubs mine has a x pipe no muffler and straight back you well have clap after 35mph I bought some neighbor hater mufflers and almost if not some clap and I love it

[@Bealgg]

I would say for the tips you should do either corvette style or dual tip single exit

[@Jordan24v]

i really like the corvette style, that’s what i have planned for the new truck on the channel here soon 👀

[@Ozikre]

Yo I recently bought a crew cab cammed 06 5.3 with true dual straights and 6 in tips out the back and its STUPID loud and clappy anywhere around 2k ish rpms and up, I'm currently looking for a muffler setup myself, and to be fair I'm not sure what cam is in it but the guy said either stage 3 or 4 cam I cant remember now but its idle sounds kinda like yours, I can get a exhaust clip if you want but imo you should get a smaller muffler if you want louder without the clap, it should increase its loudness without near as much clap as straights are, up to what you like though

[@ItsCadetTime]

God i love that takeoff sound

[@Noahlandon4]

Dual straights and keep a muffler on it so you won’t get in trouble for it being too loud!

[@keyyonwhitter1987]

Run a 4in diesel muffler would sound good with it being cammed

[@540_Hunter]

Personally, I’d say keep it just out the one side, there’s already that guy with that green obs ( COUGH AUSTIN ) that already is loud 😭 but we still love him

[@AlexArquette]

Give us a video of you using this to haul wood or material or just using it as a truck

[@843_frostyy]

Dad, Yk I got them 2 single in single out flow fx mufflas I’m throwing on nexttt

[@Jordan24v]

it’ll sound good, I’ve loved mine but sometimes you gotta change it up

[@eugenecummings6650]

Corsa duals

[@trikky4686]

I went all out😭 I’ve got the BTR stage 2 V2 on true dual straights😭😭😭

[@Jordan24v]

might just have to do that

[@regism87]

You cammed it yourself? If not how much did cost you?

[@Jordan24v]

I did the work myself, i made a list when i did it and I’m thinking about making a video talking through it and how much it cost

[@regism87]

@@Jordan24v personally that would be awesome!!!

[@grant2869]

@@Jordan24vI’d love to see that!

[@Jordan24v]

@@grant2869 it’ll be coming in the next few weeks for sure

[@obs.austin]

where’s the premiere!

[@Jordan24v]

yeah i fumbled that one

[@GabeJones05]

Listen please and I really hope you read this but “Chomper” from Lmfscrew; that truck has cam in it but please make it sound like Chomper. 🙏🏼🙏🏼🙏🏼

[@Jordan24v]

I’ll have to figure out which muffler it has, but I agree it does sound great

[@GabeJones05]

@@Jordan24v although that one is a 5.3 so I think yours would be deeper and way more raspy because even with that cam his sounds raspy

[@540_Hunter]

@@Jordan24v pretty sure most recent exhaust video of his gon get you right

[@Ozikre]

Chomper is the chopacabra cam, different cams give off different lope and such, he would have a hard time trying to make his truck sound like chomper because of the different cams

[@GabeJones05]

@@Ozikre I do understand that but that’s kinda what I was getting at and my personal favorite is a Chopacobra cam but it’s also his truck too so

[@540_Hunter]

I made it bbg, had to pull thru

[@Jordan24v]

I appreciate you, I messed up the premiere and had to private the vid for an hour 🫠

[@540_Hunter]

@@Jordan24v I know man, it’s alright I still got to get that first comment 😭

[@RadDadRado]

Just ordered corsa pro series mufflers for mine. Check them out

[@Leaninwithbean]

Duals look better

[@ItsCadetTime]

Nah bro go loud (hunters boring today)