Best DIY GoPro Mounts

[@AlexBridgeforth]

My wife is buying me the Garmin Ultra 30 for Christmas. I do a lot of trail running and mountain biking. Loved the different DIY mounts. This will be my first jump into the sports camera world.

[@Manuel_Z_Kayaks]

1:40 Use the hose clamps with the plastic thumb handle instead of the screwdriver type.

[@uzdik.student]

Which one is the best for swimming pool setup to film and analyze strokes?

[@CycleMan2200]

I like the handlebar setup. Unfortunately I have had 3 GoPro's on my bike and they all went out of focus. The Silver one in particular is really badly out of focus. I have 2 Silver + models and they were also on my bike's handlebars. They too went out of focus. I now have the Black + and more recently, the 4 Silver. Any suggestions as to how to dampen the vibration to make it easier on the camera itself? I will not put any of my newer cameras on my bike. I will not risk ruining them. Thanks.

[@cayman2019]

Could you show shots of the mounts in use? I was watching the DIY hand/wrist/tree video and I wanted to see how it looks with it on. Any vibrations or slidding?? Thank you!!

[@rodrigoyama5089]

Hey bro i made your zip tie mount and i sticked under it, on the piece pf credit card a velcro strip, so then i cas use this mount in two ways you know, the way you teached or sticking it in anyhing with and velcro strip. Thanks man and happy new year

[@PersonalVideos2008]

Pro tip for Zip Tie mount: You can get reusable Zip Ties, which are really handy for quick tool-free removal.

[@MsDreem77]

Z juju b Nn o

[@TheAdamAdy]

be careful though, overtime they loosen up and eventually it can get free on its own

[@ScrapwoodCity]

Awesome, very helpful, thanks for sharing!

[@MrBooojangles]

I have just got a massively long extendable pole from a window cleaner friend of mine. He snapped the window cleaning brush off the end. With it fully extended the end is about 25ft in the air. I'm going to make some kind of mount for on the end, don't know what yet. If you know a local window cleaner who has bust his pole, it looks useful for many things, even poking balls out of trees.

[@aidanm.9612]

Lol

[@jasonlara]

@ 00:52, what case is wrapped around your camera? I've looked everywhere.

[@jareddifiore1703]

its called The Frame

[@edcatt9196]

What about a GoPro mount that fastens to a bike handle bar, for example, but swivels around front, side, and rearward? Would be great for panning with the camera while riding by an interesting view or object, etc. Any idea on how to make something like that? That would be great! Thanks.

[@jamesdryburgh8296]

Just bought my first GoPro and your videos are inspiring and exciting. Summer holidays are just around the corner and I can see a few DIY projects on the horizon!! Cheers from Stockholm, Sweden

[@MoreLocations]

I like the way you say DIY. Thanks for sharing the great ideas 👍

[@007tallguy]

some really cool tips there! for that ski pole mount, something a bit better, and extendable, use a hiking pole instead! they're easily adjustable and some of the better ones come with the standard 1/4 x 20 screw already fastened on the top. for about 30 bucks brand new, you'll have the perfect pole, approx 5 feet long when fully extended and very light weight.

[@MotoZoh]

Can u help how to make a 1/4 screw to go pro mount?

[@RishikeshKulkarni]

Thanks for sharing awesome DIY projects. I would try yo make the zip tie mount. I'm a motorcycle rider and use my GoPro hero 3 while riding. I saw a video of a Motocross rider use a strap mount on his ankle!! Can I use my chesty mount to strap it on my leg? Will it be enough stable?

[@kylemartin101]

I think the head strap mount might be best, I did it with a ski boot. Check out this video: kzbin.info/www/bejne/eaPHmZmiqNerfs0 if you get it to work send me a photo I will share it with the community [e-mail]

[@BrotherSocietyHD]

I love your DIY Videos! A lot of these i tried at home and they work fine :)

[@jasonstevenson1478]

Hey Kyle, thanks so much for the vids. I followed your steps on how to make the hand held handle mount for my GoPro, it was so simple and easy to make. It took me a total of 30 minutes to make. Awesome. Thanks again.

[@cubfsx4965]

Hey Kyle! I want to make a DIY floaty handle out of PVC and I think that 1 inch pipe will float just to let you know!

[@linusferrao6351]

Can u make a video on how to make a go pro Mount for the bike helmet

[@RaisedByWolves79]

Wow - I've never seen your videos before, but I'm really impressed! Many thanks for sharing!

[@AndyMc1952]

zip tie mount is a winner awsome thinking ...... great job

[@cabodog3392]

Is the DIY hand grip made with 3/4 or 1/2 inch PVC?

[@NITZO83]

Hey Kyle I have a question about a gopro mount. Do they or anyone make a mount for 2 cameras to be mounted together back to back on the same mount? I am wanting to film me kayaking forwards and backwards on the kayak. Any tips??? Thanks!

[@CPTcakester117]

i togught for a handle you can put an adhesive mount on a gater ade bottle and you got a handle that floats, you can paint, and change the go pros view

[@olivermoes-okun2468]

how do you get so many go pro base plates? Is it just from all you go pros? I have the go pro Hero and it doesn't even come with one baseplate but i really want to make a tripod mount. Is there another way to do it?

[@zingymantella590]

subscribed! you are very creative! I really liked the clamp mount and the zip tie mount! I will be creating some of these soon. keep up the good work!

[@orlousy]

Awesome stuff here, great ideas! I am also weeping a little realizing I did not keep my display mount.

[@OutRayGeousVideoProductions]

Cool Video! I have the GoPro tripod mount. I found a bolt that fit it and drilled a hole in a hockey puck and inserted the bolt into the puck and attached a nut and the GoPro to the bolt. I put it in the net to record myself playing goal. it is safe since a) it is not rigid mounted, and b) I'm a pretty good goalie! LOL The puck mount can be used on any flat surface, obviously.

[@icsnowman]

Great ideas! I'm going to check out your other videos.

[@bokeflo]

Some Great GoPro DIY's. I'm going to go check out those videos.

[@specfever2]

Is that the bottom of a Coleman stove?

[@TastySlimJim]

Is there a DIY or a cheap but good suction cup mount?

[@matthewmorris6653]

I would like to build a mount that would get great shots of me playing Frisbee. I don't know what I would use, but definitely something that wouldnt go directly onto the Frisbee, but would get great pictures and video

[@kaptnblaubar415]

Headstrip

[@OutdoorsAndBotanical]

for the gopro pole you could use one of the golf ball poles. the ones you get golf balls out of lakes with. just shorten it a lot. lol

[@vinmarmotovlog2848]

Nice idea I hope you upload more

[@ScotCampbellwindowpainter]

Very cool, thanks!

[@TravelGretl]

This is so awesome! Thank you for putting this online, it's a great help. Keep up the good work :D

[@stevieblokes_vlogs]

Very helpful mate,thanks for your time and trouble, I will be making some of your mounts very soon...I have subscribed...Thanks again...

[@NinjaNarutoJapan]

Very good job, congratulated

[@hemanthdc5804]

Can you show me diy of front helmet hount

[@tgvicefly]

Merry Christmas from Denmark! :)

[@kylemartin101]

Merry Christmas! From Canada

[@reviewit2139]

Really great to make them by your self! I buy all my stuff in China, it's cheap and good!

[@regmartin688]

Excellent presentation.

[@janjansen6067]

how did you shoot the footage @2:05?

[@AnthonyNgTey31]

DIY dome please

[@JoeDoesBiz]

New sub bc you make nice go pro diy's keep making more please

[@MakinMooovies]

You have saved my life with the cable tie mount thank you

[@lukedynamite4210]

i will be using some of this info..thank you

[@Vienna.Stormspotters]

6:38 nice... I use Velcro instead of Zip ties, works perfect ;-)

[@MrSatty]

great job mate

[@carminepetracca674]

The plastic clamp mount, takes less than a half hour to make, but there is a problem with the mount. The plastic breaks fairly easily where the bolt & nut attach to the clamp, especially in the cold. The plastic clamp will also break if you are not careful and tighten it "too much". So at this point it would have been cheaper for me to purchase a third party claw mount.

[@seanabadilla]

how about a DIY Gopro Dome housing? :) please please

[@boardsportsandmore_goproed9814]

Mery Christmas from Germany! ^^ Awesome video!! made my holidays!

[@slystick7735]

Awesome video! This is how I started my company. Ran tons of DIY's until I mastered them. Now I have a business! Keep it up #SlyStick

[@hmax1591]

great video full of ideas, thanks for sharing

[@WheelGunsIncorporated]

you have some great ideas thanks for sharing. Keep up the great work

[@SammyGarrison]

what is the best mount for recording a timelapse (of the beach)

[@jrtfilms4706]

Just a basic tripod can do the job you need de tripod mount tho

[@xXhorrschdXx]

Great video! Really inspired me to do more on my own! :D But aren't the magnets dangerous? It's always said that you should keep them away from the SD card? Thanks! Regards from Germany!

[@kikinhabbo2591]

I love the zip tie mount! :D merry Christmas

[@boymugnaadventure2967]

New subscriber... Thanks for sharing

[@buddywest7968]

I am thinking of buying the Hero 4 session. I want to use it while working as a traffic controller. I want to attach it to my shirt at the front without using the chest harness. Any ideas?

[@waqar6590]

+buddy West velcro?

[@buddywest7968]

Bloody good idea about the harness. Thanks

[@sohebr6540]

Not sure why the dislikes. Loved the video.

[@giminirush77]

can you make "The Jam"

[@BloodSweatnBass]

Awesome tips

[@lolzdecap]

This week I plan to make a DIY mount so I can film a little steadier with a Go Pro camera wheel so wish me luck.

[@kylemartin101]

Good luck, send a photo of the finished product to me via facebook or twitter and I will share it with the community.

[@desotopete]

Great ideas

[@222miner]

Great ideas, Tks

[@soccermygirlfrnd4985]

I think in d hero five they should make a removable lens so that we can switch from wide angle to normal ect

[@TheWildOnesAreBack]

You can already do that in the settings

[@kaptnblaubar415]

In the GoPro Studio you can reedit it

[@Techreviewgr]

Great DIY videos! Keep surprising us!!!

[@summerdigital]

You should make a DIY gopro 360 helmet mount

[@matthewmorgan5155]

great ideas

[@7AwesomeSauce7]

Merry Christmas from Australia

[@kylemartin101]

Merry Christmas!

[@laurabrookes2804]

Merry Christmas to you to!

[@katherinnev21]

You should give it a try is excellent I bought one and is the best I have ever bought. www.stunningmovement.com.au/gopro-hero-accesories-gopro-hero-brushless-gimbal-steady-cam-stabiliser-sydney-australia/hand-gimbal-steadicam-handheld-gimbal-for-gopro-and-iphone-smartphone 

[@destinhook3826]

Merry Birthday!

[@destinhook3826]

***** No? Fuck off with the advertisements. You earn nothing from them.

[@stankojehart5680]

i love diy floatly orangr thing it realy help me👍

[@CaptDavesSportfishing]

No DIY mouth mount....? (the Grill mount ad is showing right now on this page) OMG..the rotating time lapse was with a Hero 2! (must be ancient history) Merry Christmas from Sunny Florida, it's almost too warm!!

[@kylemartin101]

I have never made a mouth mount, maybe in the new year. Yep the HERO2 is back! I have got it back out I am working on a comparison between it and the HERO. Merry Christmas from rainy Vancouver, Canada, it is almost sunny this week!!

[@CaptDavesSportfishing]

GoPro Tips and Tricks That's the comprehensive video I have been looking for. I know the out come, but I maybe surprised.

[@MW2LS]

great video.Loved it.

[@rodrigomorales9605]

congratulations!! great chanel... ,,,great ideas and projects!!

[@coooooooooool1000]

2:00 lol i had the same idea today (we have a huge steel supension in the living room)

[@rstjeff]

This guy deserves more subscribers like damn man

[@BrianFolks]

I did the magnet mount using rare earth super magnets. Helps to make sure the camera does not come off!

[@kylemartin101]

I wanted to used them when I made the mount but I was worried they would over power the glue used to attach the magnets to the mount. Has this been a problem for you?

[@BrianFolks]

Kyle Martin "GoPro Tips and Tricks" No problem. I used some strong Gorilla Glue. I also covered the magnets with a layer of electrical tape so it would not scratch anything (especially my car).

[@NYpaddler]

Kyle Martin "GoPro Tips and Tricks" A glue failure won't make the camera any less lost than magnet failure. Use a good epoxy and you shouldn't have to worry about the magnets coming off. A single magnet can easily have several pounds of holding power, but several thin magnets will give you more surface area for glue relative to the total holding power. You could also use ring magnets and bolt them on, for a $10 mount with 30+ pounds of holding force.

[@soccermygirlfrnd4985]

Hey don't use strong magnets near electronics they will get spoilt

[@vdubpowered]

+Linda Ladye if the magnets are too strong it will screw up the gopro and youll be buying a new one anyways

[@swift1n389]

great stuff my friend subscribed :) !!!!!

[@UnderwaterScotland]

Pretty cool man👍

[@duncanchalmers1992]

Im not sure what to use my base plate for. What is your favourite DIY to make out of it

[@TrueElitegaming1]

Try his diy chest mount

[@labexplosion5314]

thank u mk tech the videowas very helpful

[@chariftoufelaz2205]

excellent

[@JZLFERRER]

very dope video

[@SupRec]

Awesome!

[@INTERNA9]

AWESOME !

[@andreweimaa]

What's the best mount for mountainbiking? I don't want to put my gopro on my head

[@pedrodebiasi8354]

handlebar mount

[@pedrodebiasi8354]

buy an aluminium mount because the plastic gopro mount is very fragile

[@andreweimaa]

Pedro Debiasi thanks

[@Northernblades]

You will NOT be happy with the helmet mount. And dead serious the Handle bar mount is worse. The best videos I have gotten have been mounted on the seat post. Or off of the bike frame pointed forward. I suspect the "stem" mount, with a single gimbal would work extremely well. but can not say for sure.

[@TacBandit]

Mount it under your visor, best view

[@KERONG889]

Creative

[@chetpietrzak2120]

GREAT VID THANK YOU

[@harrymeyer9503]

i think you should say DIY a couple more times

[@Pursnikity_20022]

Possibilities are endless

[@samcole6597]

Your the best

[@olympianzeus]

The tips are very good. But stop saying all the time DIY it's boring we see the video title and we know stop it.

[@soccermygirlfrnd4985]

Hey I love d vido but dnt use strong magnets they will spoil electronics

[@andrewrobotbuilder]

Soccer My girl frnd Magnets only cause damage to magnetic-sensitive devices like HDDs, generally electronics are safe from magnetic fields unless they're rapidly switching.

[@Primiano4]

Very good boy! Me too i did some mounts for my Sony, come to see if u want! Compliments, hello.

[@TheBackpackingSailor]

2:17 and tons of things to destroy with it

[@MichaelMegaChannel12]

I would add a mouth mount. Sounds radiculous but it is really smooth and versalite. Check it out on the channel of Michi Leber. Just type Mishi Leber mouth mount ;)

[@mikz86ta1]

Handlebar mount faces the side....thanks, cause that's where everyone aims their GP while riding. Ziptie mount....please disclaimer this from anything that will be In-Motion. Lots of ignorant people watch and mis-apply ideas.

[@zachdy]

Someone count how many times he says DIY