Best Fiat 500 Window Regulator Fix, Best Video around, No stupid Music, No B.S, Lets get it fixed!

[@stevecerimeli5845]

I rarely ever comment but this was a very well done video. I would only add that maybe showing exactly how you took off the other parts might help those who don't know. I watched as a refresher because a lot can change in ten plus years since I've done one. Thanks

[@MechaniclifeJDM]

Much appreciated sir, thank you 🙏🏼

[@joe_tacular]

my window regulator stopped working this week and your video was super helpful in swapping out that part. Really appreciate the advice on tools too. Thanks again!

[@MechaniclifeJDM]

Great to hear! Like and subscribe friend!

[@EnriqueCaballero-x2k]

This video could not be any better explained. It killed my fears from fixing mine. Let hope I can do it now. Thank you so much for your time. God bless.

[@MechaniclifeJDM]

Ask any questions you need to ask if you happen to get stuck, thanks for watching and commenting

[@whiptedoable]

Yeah without breaking the plastic clip

[@eddiee2371]

Thanks. For a few things. Great illustrating and a great detailed explanation how to remove the panel. Also showing me the existence of a trim proper tool. Eureka. I needed to remove the 3rd brake light off an Audi and realized the best way was with reverse pliers. I ended up using a decorative chain opener. A pain, but i got it. But that trim proper tool was tailored made for it. Man, i sure miss the Chilton books from years ago. Thank you.

[@MechaniclifeJDM]

Glad it helped!

[@meanssnothingg]

Posting this for my note-to-self bc I'm just a girl🎀 Tools Needed: Allen Wrench, Socket Wrench, Philips Head Screw Driver, Trim Tools, Silicone Lubricant Spray (for window tracks) @2:10 - Door Panel Screws @2:34 (5mm allen head screws) @2:48 (5mm allen head screws) @3:24 @5:02 - Locate Door Panel Clips @5:09 @6:05 - Door Handle Cable @9:40 @7:20 - Take Razor Knife & Unstick Foam Covering @8:23 - Window Glass Clip Attacher @11:55 @1:45 - Tape Window @10:01 - Electrical Connecter @10:54 - Regulator Nuts (off) @11:18 - Regulator Disassembly @15:09 - Regulator Assembly @16:03 - Regulator Nuts (on) @16:57 - Re-Align Window @18:05

[@MechaniclifeJDM]

You are NOT just a girl, you’re smart, nice work, thanks for watching, be careful for moving parts in the door panel when energized, let us all know how the repair goes for you.

[@meanssnothingg]

@@MechaniclifeJDMthank you so much, that’s very uplifting ! I was following along very well up until i was just abt to install the new regulator… 🤦‍♀️ i accidentally bought the new one w/o a motor & as i tried to affix the old motor onto the new assembly, the wires sprung loose & it all unraveled 😂 i will be buying a different one w/ a motor already on it lol

[@MechaniclifeJDM]

⁠@@meanssnothingg😂 lesson learned on that one, it happens, even to the professionals, at least you weren’t injured, hopefully you have it back together already and working good by the time you see this. Follow up here either way. What state are you out of?

[@meanssnothingg]

⁠@@MechaniclifeJDM I completely failed… the entire window glass shattered 😔 just kidding lol the replacement was a success ! it was surprisingly easy, so thanks again 🙏🏼 I was also wondering can WD-40 be used as a silicone lubricant spray like shown in the video ? & I’m out of tampa, FL !

[@meanssnothingg]

@@MechaniclifeJDM ok got’cha, good thing i asked 😮‍💨 & what a coincidence, small world lol

[@ryanbloom6369]

The fix was easy. Hardest part is getting the trim off, but that's not too bad either. Saved hella $$$ and feel like I know my car better. Thank you for this walk through! 😇

[@MechaniclifeJDM]

Glad I could help, thanks for watching and commenting, we appreciate ya!

[@mikeluc12]

Great video that made it very easy for me to complete this myself. A wholehearted THANK YOU for sharing this information!!!

[@MechaniclifeJDM]

You're very welcome! Thanks for watching and taking the time to comment.

[@thedevilsgauntlet]

Nice detailed video bro! A very BIG help! Your voice reminds me of Matt D - LOL

[@MechaniclifeJDM]

Glad it helped!

[@dannyhart8]

Subscribed twice - 2 different names... That's how much you saved me. Great vid, really clear, another trick I used in when pushing the window into the new plastic regulator clip I used a 12 inch quick grip placed carefully on window glass and inside the door cutout. carefully squeezing while making sure the clip was aligned with the hole. worked really well. ( i have hand/finger issues so I couldn't push hard enough.) Jdm may have a caution here....and I'd listen to him vs me. ;-)

[@MechaniclifeJDM]

Thank you so much for your kinds words, I am glad it was able to help you out. You or any other viewers are more than welcome to post up any additional information in the comments that will be helpful to another viewer on my channel. I like to keep it an open forum of helpful tips, it’s the whole reason this channel was created. Thanks very much.

[@MilesCasey-ux2bg]

Great video, saved a ton of money on my daughter's 500

[@MechaniclifeJDM]

Glad I could help, thanks for watching and commenting, like and subscribe!

[@reidbourcier]

I like that policy, "once you're a jerk I don't do business with you" 👍

[@MechaniclifeJDM]

Thanks for watching and for taking the opportunity to share your thought on this with us! If only we could permanently affix a warning label to their heads to warn other professionals out there. 😆

[@sercanserj7804]

Your a professional? 😂😂😂😂😂😂😂😂😂😂 fml I needed a laugh

[@MechaniclifeJDM]

@@sercanserj7804 Hi there Mr. keyboard commando with one video on your channel, not trying to help anyone but quick with your opinions. Your one video bashes KZbin yet you still came seeking help, that in itself speaks volumes about your mode, thanks for watching have a wonderful day!

[@sercanserj7804]

@@MechaniclifeJDM 🤣🤣👍

[@cantstopme1101]

I have a 2014 Fiat 500L 1.4L turbo 4 door. I am having trouble finding the regulator-motor assembly that fits my car for the front driver's side window.. On E-bay they say they are all for the Fiat 500 cars. Can you help me?

[@kateharwood7653]

Done! Saved me a💰and so gratifying to do it myself. Thank you.

[@MechaniclifeJDM]

Glad it helped!

[@britchickhuntress1068]

Awesome best video for this. What after market regulator did you use? because some aftermarket ones are saying you need a rivet gun. If this one goes in like the OEM part I want to use the one you used. Please help thanks.

[@MechaniclifeJDM]

It was a Dorman part and its still working strong, thanks for watching, I hope the job goes well for you friend.

[@whiptedoable]

Just wish you would have showed us exactly what you did from start to finish like removing the door panel for first timers

[@whiptedoable]

This is the second time I've had to do it in the last year so I have to go out and buy the tools to remove the panel I bought the Phillips screwdriver Allen wrenches and now I need to know the size socket to remove those nuts holding in the window regulator

[@paulking5447]

great video best one so far on youtube how to fit a 500 window regulator well done sir

[@MechaniclifeJDM]

Thanks for watching, and thanks very much for your kind words, I’m very glad that I was able to assist you and satisfy or even exceed your expectations after the initial click. I genuinely hope that you have subscribed. Thank you and have a great day.

[@DannyShayTarot]

LOL.... the J discount!!!! so funny... thanks for this vid. really good.

[@MechaniclifeJDM]

Thanks, glad you enjoyed it, like and subscribe!

[@Dereks69]

Also how do i get that little guider clip inside that rubber track. ?

[@MechaniclifeJDM]

Elaborate on your question a little further

[@DrivenMind]

Im finding its rarely the regulator, but the tracks that let the window get out of alignment which breaks the regulator when used.

[@MechaniclifeJDM]

Highly possible But also dirt build up within the tracks causing higher friction

[@superdiver.]

Where’s your shop I want to bring you my cars!

[@tanyad3424]

Thank you for the helpful tips and attention to detail.

[@MechaniclifeJDM]

Glad it was helpful!

[@gettingpast4391]

wow I can't thank you enough for this video. This is so incredibly helpful thank you!

[@RRBTVA]

Love your video and your style of explaining each step. I do have a problem I'd like your advise on. Everything went just as it should...until I tested the operation. The glass moves straight up and out instead of following the slight curve of the window frame. I have reassembled and reassembled the entire process three times and each time the class takes that same route. The clip is securely in the hole where it snaps in. I'm at a loss. Any advise?

[@MechaniclifeJDM]

Hello, thank you for the kind words. Try to inspect the track for bends if its good, set it further back into the rear track then tighten it down but don’t go crazy on those pinch bolts, then follow up, also, where did you get the regulator?

[@twotone9908]

What is list of tools I need

[@twotone9908]

Where can I get the door panel removal tool

[@MechaniclifeJDM]

Napa, O’reilly’s or Amazon

[@babythespian2127]

I’m gonna have to do this cause the tint in my window is crumbling and made my window stuck. The motor is still running and working.

[@AGa-yd6id]

I need help, the lights won’t come on and all the fuses and relays are good….

[@MechaniclifeJDM]

Disconnect your negative battery terminal and search online for the BCM repair for your specific model

[@beverleyroberts1489]

As a woman, I enjoyed your video. Very easy to follow. Could you tell me the headlight tip please? Also, what are the clips I need to bring the top and bottom of the wing together please?

[@MechaniclifeJDM]

Glad it was helpful! The headlight failure is due to (2) electrical components known as relays which have failed on the Body Control Module, which is up under the dash on the drivers side, research this Fiat 500 BCM Headlights Staying On

[@randyfender7051]

Excellent explanation! Thanks!

[@MechaniclifeJDM]

Glad it was helpful!

[@yvonnesantiuste4328]

I have a 500x 2018. Need help replacing window regulator for left driver side. Can you help please??!!

[@MechaniclifeJDM]

Where are you located?

[@yvonnesantiuste4328]

Miami, FL

[@MechaniclifeJDM]

The process shown in the video is the same for both sides, just mirror image and you may have a little bit more wiring to disconnect but it’s nothing difficult. If I were closer I would come help but I am in Southern California so for right now a visit is not in the cards, but who knows maybe next summer, but I would hope that your windows issue would be solved by then.

[@MechaniclifeJDM]

The process shown in the video is the same for both sides, just mirror image and you may have a little bit more wiring to disconnect but it’s nothing difficult. If I were closer I would come help but I am in Southern California so for right now a visit is not in the cards, but who knows maybe next summer, but I would hope that your window issue would be solved by then.

[@yvonnesantiuste4328]

Appreciate that. Can you suggest a place where I can buy the regulator for my ‘18 Fiat 500 x that doesn’t cost an arm and a leg? I have already bought 2 and neither one was the correct fit.

[@josephcarranza5533]

Hey bro, how do I know if it’s the window regulator or Window clip that’s broken

[@josephcarranza5533]

Before removing and buying the parts, of course

[@MechaniclifeJDM]

You will have to pull the panel and visually inspect. However, at the rate these parts are failing, I strongly suggest that you buy and replace both, if you can swing the cash. Go in there once with quality parts and do a careful job and it will all be good to go for a good long time. Thanks for watching and commenting, follow up with us here once you repair it.

[@josephcarranza5533]

@@MechaniclifeJDM thanks boss

[@MechaniclifeJDM]

You’re very welcome but there is no boss here, just a humble servant of God. Thanks for being a supporter.

[@josephcarranza5533]

@@MechaniclifeJDM amen

[@georgiediane]

Did you say you had a solution for the lights staying on??? Thank you

[@MechaniclifeJDM]

Its in the BCM under the dash, the relays stick, there are people on the internet who repair them.

[@zanetaylor1608]

I changed out my regulator and snapped everything in, but it won’t stay level. It keeps tilting towards the front and popping out. What do I do? It’s a brand new damn regulator.

[@MechaniclifeJDM]

What brand?

[@joesigmansiegman4671]

One bolt didn’t line up to bolt hole help

[@MechaniclifeJDM]

Loosen all bolts to allow movement Thread all bolts in by hand then snug down evenly.

[@rickisantos7547]

How did b you Force the windows down

[@MechaniclifeJDM]

I didn’t have to, the regulator was so busted it fell in. Is yours stuck in the up position?

[@darkforest33]

shop still on Forsyth? thanks

[@MechaniclifeJDM]

Good times back then.

[@naplidon1216]

Why can't you just replace the motor on the window regulator ?

[@Glueworm]

Thank you!

[@MechaniclifeJDM]

You're welcome!

[@kevinsmith7604]

Nice job!

[@MechaniclifeJDM]

Thanks for the visit and the comment, much appreciated.

[@moneyhoney1]

What county are you in? can I just hire you to fix our window? 😜

[@MechaniclifeJDM]

I am in the USA, Southern California to be more specific, come on down friends! Thanks for watching and commenting, consider liking and subscribing.

[@ifeelikedyeing]

So, ive tried replacing mine and i came across an issues after proper installation. What happened after assembly i forgot to calibrate the regulator to meet the window. Meaning, making sure my positiong of the regulator is all the way up, rather than down. I went tried moving my window down and what happened was it fell through the clip and snap it again. Lmao I'm about to install it again we'll see how it goes this time! Wish me luck 💯🔥

[@MechaniclifeJDM]

Wishing you luck… Success is repeating something after failure and learning from the mistakes to produce the desired results.

[@laincathy]

good stuff

[@salvadorpefeto2375]

I have headslights dont turn offf

[@MechaniclifeJDM]

Body control module internal relays fail There are companies online you can ship the module to and they can repair it for you quickly and ship it back, the cool thing is that it’s plug and play because it’s your original module going back in.

[@RukiyePal]

You already open door that's not work this way you should show beginning

[@zanetaylor1608]

Can I please give you my phone number so I can text you what’s going on with the window so you can probably tell me how to fix it this is a brand new regulator. Let me know if I can give you my phone number actually I’ll give it to you and text me that it’s you from KZbin and your name and stuff with your number and I’ll send you the video of what it’s doing on the window.

[@MechaniclifeJDM]

Post your own video to KZbin of the window problem and then drop the link here in a comment response

[@zanetaylor1608]

I changed out my regulator and snapped everything in, but it won’t stay level. It keeps tilting towards the front and popping out. What do I do? It’s a brand new damn regulator.

[@MechaniclifeJDM]

Your guides may be out of adjustment Also I would double verify that the part you received is correct for your car