Best Gas Masks To Buy in 2021 - MIRA Safety CM-6M Tactical Gas Mask Review

[@SurvivalOnPurpose]

Use code SOP10 and save 10% on your MIRA Safety order at SurvivalOnPurpose.com/Mask

[@jeremymoses7401]

Not protecting you as soon as it goes on, you didnt purge and clear. So whatever prompted the mask is still in there with you and your seals have not achieved vacuum. To purge and clear, cover your filter with your hand, breathe out heavily. Then attempt to breathe in, the mask should suck up to your face if your seals are good and youve covered the filter properly. We'd usually do this about 3 times.

[@hovanti]

Brian, and others, I strongly suggest being clean shaven so the mask seals against your face properly. You can put your hand over the opening on the filter and inhale; mask should suck against your face and stay that way while you hold your breath. Shave, or skip the whole mask thing. This from a Desert Storm veteran who trained often with a mask.

[@carlosfernandez1]

Excellent video. Very important information. I was thinking that a lot of people won't follow the advice because it's too expensive...well it's all about priorities. BTW...I started to make contact with my boy scout troop to start sending them some donations. Since hurricane María here in my island, I have been applying a lot of basic survival stuff learned in my boy scout time,of course complemented with my ARMY training and the videos of people like you. 👍🏼 very important to promote the Boys Scout of America.

[@darkcorsair247]

totally agree with having a gas mask as an edc. i had a bad situation when i was just shopping around and in my way back to the parking lot, a couple of meters away the riot police was called because of a certain situation and they used gas for crows control. now the whole situation had stopped but the wind carried some gas to where my and my girlfriend were and all the people around us stopped and couldn't move because the wind carried the gas to our where the people were. i knew what was happening but the rest if the people froze scared so a gas mask would had been a good idea back then.

[@anthonyshepard9606]

Do you know of the Parcil Safety ST-100X Full Face Respirator Gas Mask with Organic Vapor and Particulate Filtration for $119.97. I purchased four (4) of them for my family and they appeared to be an excellent buy for the price. This mask Works quite well. 🐢 👍 😃

[@viewsandreviews180]

Thank you for posting an alternative that’s about half the price of this one.

[@anthonyshepard9606]

@@viewsandreviews180: Roger That

[@SurvivalOnPurpose]

Actually, yes I do. I am not saying they are no good (I have not actually held one in my hands) . And. look, I get it. Money doesn't grow on trees and I commend you for taking the initiative to protect your family and be more prepared. I am in no way criticizing your decision, but I do think there are some fairly significant differences between the 2 masks. The MIRA seems to be a little better constructed and offers benefits such as the drinking system. And I have to say one thing that stands out to me is that, even after digging through their website and good old Google, I could not find any info on where they are made. This usually means China, which quite honestly doesn't give me warm fuzzies for several reasons - especially when you are talking about a product intended to protect your life. And, to be honest, the little picture in their ads of a flag with the words "USA Seller" strikes me as a sort of sketchy attempt to give a casual observer the impression they are made in the USA. It just seems like they are trying to hide where the masks are made, unlike MIRA who are very clear theirs are made in the Czech Republic. Stuff like that turns me off. Again, I am NOT saying the Parcil are no good, just that they don't seem like an "apple to apple" comparison. Maybe I'll buy one and do an actual comparison and see for myself.

[@anthonyshepard9606]

: Thank you for the fast response and your honest opinion. I understand that money does not grow on trees. I guess I rather get caught with something then without something. May the 2nd Amendment be with US. 🐢👍😃

[@anitaleroy9442]

@@SurvivalOnPurpose A (few) China made masks are good, they need them both for Army etc., and industrial safety. Designed rather fro an Asian face. Beware of many cheap generic masks on big internet resellers. quite different when you check with a genuine facility there (and they have, for coal industry, firefighters, etc.)

[@jeremymoses7401]

CS gas feels wonderful on a fresh shave, great exfoliant🤣🤣

[@davidmacon1138]

Nothing like Habenearo after shave eh?

[@gwendolyncrutcher7236]

Thank You so much for making this video and educating us.

[@SurvivalOnPurpose]

Glad it was helpful!

[@LeftySurvival]

Proper Prior Preparation Please...

[@wildcat8598]

Great video. I wonder with the mask that has that wide FOV if a riser mount for an optic might help? A lot of people are using them for NV for the reason of not being able to get a cheek weld and more of a chin weld. Weird at first but people say once you get used to it it’s more comfortable shooting with your head more straight

[@pabloescobar7802]

I’d love to have the more modern mask but 300 plus dollars 💵 just isn’t in my budget ..

[@WaschyNumber1]

Are the full body ones easyer to wear, but probably not cheap with oxygen cylinders 🤔

[@rudyo8409]

I have the bug eyed one with canteen. Thank you for the canteen demo"

[@valqueenofValhalla]

Am I over prepared if I have scba and papr back pack rigs for my family

[@davehatzakorzian6994]

Very informative video I'm definitely going to look into one of these

[@valqueenofValhalla]

I use laser while I’m on my rifle or my glock I like the larger lens

[@pigterrypigrowlands2472]

Does this mask stop nitrous oxide?

[@vojtechdanek1154]

depends on filter

[@Stoney_AKA_James]

We are issued CM-7M masks My recommendations: No matter which mask you buy get as many filters as you can afford, get the CamelBak adapter and learn donning and doffing!!

[@cmsilver552]

I couldn't find the option for those of us dependent on glasses

[@valqueenofValhalla]

I recommend getting the camel bak attachment and leave it connected. To the type m I prefer it while training in it to

[@owen1438]

I bought the shirt and patch and i love every thing especially that you put fat wood in it

[@SurvivalOnPurpose]

Thanks!

[@Andrew-em2xe]

i hope this thing doesnt fog up in 104 degree weather when im sweating.

[@CRDODGE47]

You haven't been in the military it seems from not tilting the canteen, that mask puts me in mind of the Russian mask which the filter was told to the US GI'S back in the 80s was about 9 hours where as the one we had was good for around 16 hours . Good video though. I could be a little outdated because it's been 35 years since I was was in NBC. NUCLEAR BILOGICA school

[@SurvivalOnPurpose]

No I have not. But all the info I could find on filters says the exposure time depends on the type and levels of contaminant.

[@anitaleroy9442]

@@SurvivalOnPurpose and the wearer's activity, and the weather condition, dust, ... too many parameters

[@TheGrizzlyHillbilly]

Is it really worth $240? You can get a mask without the eye shield for under $100 with the same rating.

[@vojtechdanek1154]

sometimes you can get it non mira branded for like 150 dollars

[@markwray8614]

Does it fit the standard m1 cap for the gi canteen?

[@alexsmart5452]

yes

[@mv504]

Well, you can Put in another reason to by one. Let's just hope he will "fog off" and let us be.

[@Andrew-em2xe]

that prescription kit costs as much as the mask... that breaks my heart

[@SCarboni]

No love for the US Army M-50?

[@James-ke5sx]

Nice mask unfortunately they are not recommended for the present situation with covid because the exhaust valve is not filtered. My friend bought one and was refused entry into a vaccination site unless he wore a cheap medical mask over his mask. I have the cheaper 3M multigas with hepa filters but my exhaust valve can be filtered so I can use it for covid.

[@brianwieland7453]

🤣

[@jeremymoses7401]

Also, blow into the canteen first.....

[@Andrew-em2xe]

i think the machine could be half of what it is but keep the same battery pack. it seems over build unnecessarily. Id be fine with 1 filter on it and half the noise, half the power, half the size, twice the battery life.

[@arthurleslie9669]

Thank you for the review … but no thanks.

[@awsomedude9111]

Clickbait, this is not a good mask for the money.

[@domp5014]

Indeed. Chads laugh in Avon M50, C50, FM53, and FM54

[@lisak4349]

It´s the best mask for the money here in the czech republic. It cost me around 120 usd.

[@awsomedude9111]

@@lisak4349 right it’s just I’ve seen a Lot of channels give in to this company and nearly I did myself because I was looking for the best mask. I ended up getting a forsheda but I learned mainly from the channel weaponsandstuff93

[@vojtechdanek1154]

@@domp5014 mira masks are just rebranded gumárny zubří masks you can get those for good prices

[@domp5014]

@@vojtechdanek1154 dude I already know. That’s why I got an Avon c50 instead

[@georgeacosta9958]

😀🇺🇲👍❤

[@WaschyNumber1]

News what news, the lie Media cnn ect 🤔