BEST Home Car Lift 6600LBS! - TWIN BUSCH TW S3-10E Review!

[@GasTachs]

*BUY YOUR LIFT TODAY* Use this link bit.ly/BESTCARLIFT

[@xXTECHxKNIGHTXx]

Do you know if they make a 120v version?

[@GrumblyAirMonk]

I was thinking between 5-6K.. its actually 2400 new... not bad - All i need is the car so i can get the lift

[@Tiwey]

5k costs the absolute top and premium model midrise lift called nussbaum sprinter 3000

[@morganpowell2999]

I like this scissor lift design better than others. You can actually get under it for exhaust work, or transmission drops, etc.

[@brendanmiele4525]

how much room or access does it give you to the transmission for removal and the rest of the drivetrain?

[@stellijer]

I was going to dismiss this until you put a corvette on it. A couple questions though: 1) Doesn't the bar keep from using a creeper or mobile chair? It's not high enough to stand under. 2) Just how high does it go up? 3) It looked like the front tire was hitting the lift on the vette? Or very close? 4) Seems a bit expensive - I'm seeing prices nearly $3000 4) How would you store this if you don't have room in your garage floor to the side?

[@tonytigere5684]

Great video. This lift looks better and sturdier then the quick jack 7000 tl I've been looking into. Quick jack looks weak to me. What are your thoughts on the quick jack and what is the price of your unit?

[@ok4377]

Thank you for the great review! Regarding the Twin Bush TW S3-10E vs the Quick Jack 7000 TL....I feel the Twin Bush appears more beefy. However, there is one thing I am struggling with when it comes to the Twin Bush. While you can certainly move it around, what are you going to do if you need to get it out of the way? Gas Tachs garage is pretty bi, so you can move it to another bay. If you do not have that luxury, or are using the second bay, where are you going to put this one? It looks like both ramps are connected. Not to advertise Quick Jack here as I have no affiliation (just looking for an inexpensive and sturdy solution myself), but the QJ is about $1k cheaper- nothing to sneeze at for me....

[@johngrant1337]

The best part about the lift is it come in Blue.I did not know about the moving kit. Now it is a tool that I need as I can use it out doors and store it inside Thanks

[@GasTachs]

When I first got the lift I didnt get the tool and move this lift was a pain. The tool makes it perfect!

[@Fredjoe5]

I seriously need something like this now. The older the vehicle, the more you need it!

[@johnmcalisterjr3913]

Very nice but I don’t have a garage do they make one that can handle Long Island New York weather I can use outdoor s all year long

[@zechariahsalisbury6029]

Looks pretty good. I was kinda surprised how fast it seems.

[@markwigdor7505]

I would need a simple lift just to prevent the 4 tires from touching the ground so that long term storage won’t create permanent flat spots in the tires wi his the present problem I have now. Is there something like this?

[@jerseyjim9092]

I like that you can access the center undercarriage area unlike the one piece scissor lift. Seems like residential delivery would be a hassle for me without a lift gate truck or a forklift. I'll have to look into delivery to a local terminal where they could load it to my trailer.

[@GasTachs]

Glad this video helped!

[@joeydelmarsjr.646]

how high are your ceiling and how high can the lift go?

[@lawnboy81SMS]

I have a Twin Busch lift. Unfortunately they no longer have a branch here in the USA which makes parts much harder to get and more expensive. It also makes it so I can’t obtain accessories for mine such as the extension bars I found on their website that I’d love to have on my lift for larger vehicles and trucks. With lack of parts/accessories availability I can’t say I’d highly recommend Twin Busch mid rise lifts and I’ve also had a couple parts go bad on mine such as the magnetic safety latch release. The control panel also is not easily detachable (such as quick connects for the hydraulic lines and a simple plug or two for the electrical between the lift and panel) which makes it much harder to move the unit as a whole once assembled. It’s extremely heavy as well which also makes it hard to move. My guess is it has to be around at least 800-1,100lbs as my compact tractor struggles to lift it when I need to move it on occasion in my shop to clean….

[@jefftaylor2706]

This is exactly what I was looking for. Nice work on video

[@IcemanJohnson]

Seems awesome. Not sure about storing it though. IF it were at a residential location/garage.

[@crisantojr.robles4357]

Hey Bro...do you have a video lifting Truck like Silverado. I want to see how you position them. I am thinking of buying this for my truck. thanks!

[@GasTachs]

Best I can do kzbin.info/www/bejne/equWfWmgot6ZbcU

[@knightrida6829]

Clear and concise thanks

[@na337]

the e bay one is not from twin bush. twin bush web site shows being discontinue. i really want the full but when i e mailed and ask they say supply shortage and in a year will be up to date. that was last year so dont know if they stopped selling it the u.s. seems like you can get it in uk though sighhh.

[@kdao1007]

Great video. Where is the link to buy those ramps as well?

[@GasTachs]

Bit late but here you go www.raceramps.com/?gclid=Cj0KCQjwnNyUBhCZARIsAI9AYlEnR_unQxggK7eLC5iKiqfo0RfSb0-VwqjyK-kKHoQcZxvmHx0oSYoaAhToEALw_wcB

[@beurownboss1554]

Hi friend, question for you. Have you found any vehicles that were not able to work due to the drive over platforms being the jack points? Reason I ask is because I have a big range of vehicles by size (tiny bmw z4, c6 corvette, several hummers, and a humvee). My concern is that I will find a limitation with where the platforms don't reach the jacking points on the vehicles. I am debating between this lift and a similar midrise that uses adjustable arms to pivot around to the lift points of the vehicles but Ive love to hear if you came across any vehicles personally that didn't work. My widest vehicle (humvee) is 84" wide. From what I see online, these tracks around about 75" wide so driving over them with the humvee may be difficult. Cheers!

[@billyzahid5904]

I second this comment!

[@BjWraps]

Great lift I have the same set up but I removed the swisstrax from under it because it would slide around on the tracks

[@JorgeRodriguez-gc1or]

Im about to order the same lift for a c6 z06 also, any problem with it? Any recommendations?

[@wildestcowboy2668]

Get a hellcat

[@JorgeRodriguez-gc1or]

😂😂😂

[@RayNLA]

Been a while! Glad you are doing well

[@GasTachs]

Thanks for stopping by!

[@hugosanchez8319]

Wow nice I'm look into get that type of fast lift for my home 👍👍

[@GasTachs]

👌🏻

[@gerhardschmitt5712]

Wow just being able to plug it in is a huge bonus, Great Lift!

[@Ruminator66]

Like this unique lift, the mobility and plug in option 👍

[@GasTachs]

Yes indeed!

[@jester-lester]

Thanks for the video. The only thing I'm not keen on are the 2 bars that could restrict access underneath the car, I fear that you could stumble over them when crawling around under the car

[@GasTachs]

You are correct, that are a bee itch

[@HabitualButtonPusher]

I watched the assembly vid the company produced. Did you really have to wire the electrical yourself when you received it?

[@GasTachs]

Just simple plugs

[@burleigh604]

Do you think getting 2 of these lifts it can lift my 5 ton motorhome?

[@sweettony9359]

Thanks for the info. I am looking to get a lift for my small garage and this may fit the bill.

[@wildestcowboy2668]

How much does it cost

[@MegaGemann]

Now I wanna get one!!! Thanks for the demo bro!!!

[@GasTachs]

Thanks for the kick in the ass!

[@MegaGemann]

@@GasTachs it was a great great video!

[@drlx03]

Plan to get one of those one day. No brainer for lower ceilings

[@GasTachs]

Agree!

[@Ron_Masterjohn]

Can a big guy like this guy get in between the ramps to work on drivelines or exhaust?

[@GasTachs]

I mean I have video of me doing it so yup.

[@89Trashmaster]

Did you bolt your lift to the ground? Cause it's on those slippery swisstrax's.

[@razvanturcu9871]

I don't believe he bolted it to the floor, since he said that he is moving it outside when he needs more clearance.

[@lordgarth1]

I need to make a decision on some kind of lift. This one is approaching the cost of post lifts tho.

[@GasTachs]

Yes since I got mine the price has gone up, but keep in mind this is a smaller company and the prices increase faster so the post lifts will also go up in price soon

[@stellijer]

@@GasTachs Post lifts are already prohibitively expensive. The MaxJax is nearly $4000

[@steven-g6f3y]

How expensive is the twin bush car lift system?

[@audiorat1]

I got one. It's great. I made a lot of new friends too. :)

[@PMPerformance]

So being a bigger guy, how uncofrtable is it getting to the middle of the car to do a midpipe, or whatever else one would need to do in the center without being able to roll a chair under? Is your Z lowered?

[@GasTachs]

Look it ain’t fun… but I’ve done everything I’ve needed to with this lift

[@PMPerformance]

@@GasTachs thanks for the response. I think I am leaning to a 4 post now, but it’s gonna be tight!

[@GasTachs]

@@PMPerformance have you seen those 1 post movable lifts? I was going to try those next

[@PMPerformance]

@@GasTachs yea, I’m a little skeptical though and losing mid section access. Concrete thickness will probably be more an issue with that

[@stevenviens4901]

That lift is awesome for what I would need at my house a short ceiling in my garage also and it's portable great for changing oil on the vehicles doing brake jobs working under the car. Perfect.

[@teenice894]

Curious if i could put one in my driveway 🤔

[@dubvr6nos]

I know this is an older video, but I was curious if you had any issues with the lift on the Swisstrax?

[@GasTachs]

nope, no issues at all

[@kegsemptygarage6788]

Thx for the video. Very helpful. I bought one and it finally arrived. Question. What size breaker you running? My 20 amp popped. Thx again

[@GasTachs]

Yes i'm on a 20! Enjoy!

[@kegsemptygarage6788]

@@GasTachs thx!

[@huongyn8808]

@@GasTachs That means I have to have separate 20 amp breaker for it? thanks

[@grantr5417]

​@@huongyn8808just means whatever else is on the same circuit needs to be off when running it

[@audiorat1]

Are you able to lift a Tesla Model Y? It wouldn't go up for me. Can you try it?

[@GasTachs]

unfortunately i dont have a Model Y handy..

[@audiorat1]

@@GasTachs I called them. They said due to the nature of the scissor lift, there has to be higher "pre-lift" in order to lift heavier vehicle such as Model Y. The vehicle is lower than normal vehicle which add to the problem. The solution is to add more platform for it to drive on so the lift has more leverage and better angle for the hydraulic system to extend. I think it's kinda like you need to extend the radius to apply more torque.

[@johnsparks2669]

Great Video, thanks for sharing. Was looking for something functional as an alternate to the old school column style lift. I will be considering this as a solution.

[@GasTachs]

Glad it was helpful!

[@monica93304]

That lift would be perfect for my Audi B5S4 and Vw Beetle

[@rb2530]

You say the lift does not need an air compressor, however, the link you provided has, in Red Letters " ( air compressor will be needed, minimum 30 amp breaker required) " care to explain?

[@Skdjiejxuje]

So does this require a 15 or 20amp receptacle? My friend brought one brand new a while and has never got it working. It seemed as it didn’t have enough power. Any ideas.

[@GasTachs]

Mine works on a 20, if he never got it working maybe there is a loose wire in the control box

[@googleuser1006]

my ex is a total receptacle

[@johnwalters878]

I have the S-19 and I never got mine working either. It won’t work with 30 amps. It won’t reliably lift the platform itself . It’s the most expensive raised desk I have ever owned. All they do is blame the power and offer no real help. Even if you do get these lifts working, you shouldn’t trust it to be able to get it down if it gets stuck on the locks. Maybe these work in Europe, but not in the US. I can’t even get them to sell me a new motor. So in my opinion, if you can’t get parts from this company, it’s worthless even if it’s built well.

[@davem5333]

​​@@johnwalters878If you go to the website it says these are 220 volt. It won't work on a 110 volt American electric grid.

[@johnwalters878]

The lifts sold in the US run on 110v power.

[@Hasinsamuray]

Some engineers telling that, scissor lifts are unsafe, they prefer columns, traditional ones. How do you doing so far?

[@TheAirun17]

New Sub here, was looking for reviews on this lift and found your channel. Have you used this lift to pull a transmission? Is the space between the runners sufficient to comfortably work in that area?

[@GasTachs]

Havent done any transmission work, but should be enough space

[@klaas-janbrink4366]

You have the lift placed the wrong way. according the manual you have to turn it 180 degrees.

[@RotaxXS]

Can you easily remove the ramps? I need to lift a MIata and I would need to remove 1 side after the car is in place.

[@KingTrumpTheGod]

I want to work on the transmission of a ‘93 Dodge Dakota. Will there be space between the lifters to get at the transmission to take it out? It looks pretty small space between the lifters.

[@GasTachs]

It’s possible but won’t be fun

[@jayroc1502]

I like how he says garage.

[@markyager4357]

how wide is it

[@Krazy_Shorts]

He says you only need a 110v electrical....but they Ebay link to the item has a few customer reviews saying it doesn't work with 110v and they needed to upgrade to 220v electrical

[@usmc12710]

Loved the video. Look forward to the next one.

[@GasTachs]

Thanks !

[@hhazelhoff1363]

Better of with a two post lift if your not going to move it. Gives you way more access, and you can remove the tires

[@GasTachs]

I remove the tires with this lift all the time…

[@hhazelhoff1363]

@@GasTachs can you remove all four tires at once, or do you have to front and back separately

[@GasTachs]

@@hhazelhoff1363 all 4, done it With my R8, Corvette, Expedition, Jeep Gladiator… the list goes on…

[@ThisThatLittleFarm]

Great VID. Thanks buddy!

[@GasTachs]

Thanks, and thanks for stopping by!

[@kingkobina]

Great lift. Looks super simple 👍👍👍

[@CJP1012]

How easy or hard is it to get underneath the car to change the oil, etc.?

[@GasTachs]

It't not the easiest but BUT better than doing it on the ground

[@taranisx]

I wish would love to have one in my garage

[@928pcar]

Ordering my S3-10e when they next become available. Hopefully in 4 weeks I’m told

[@GasTachs]

Nice! Congrats and enjoy!

[@jackargese895]

I love it! On my wish list!!!

[@billfuel6916]

I LIKE WHAT YOU ARE DOING I NEED ONE LIKE THIS

[@kenwendorf8913]

Your link to purchase one sends u to another company not the one u are showing ?

[@GasTachs]

The link used to have that lift, it looks like the company doesn’t sell that lift anymore

[@victorp5491]

Any chance I could use only one side of the lift via complete separation of 1/2 of the lift for a Motorcycle??

[@GasTachs]

kzbin.info/www/bejne/oGLXnGacnr6DhcU

[@peoplewatchers]

Looks just like what I might need for my garage.

[@GasTachs]

👌🏻

[@audiorat1]

Twin bush is no longer in US. I contacted them about leaking hose connection. Ended up emailing the headquarter.

[@motor_citymuscle288]

Great video! Thanks for sharing

[@maveric0738]

I need one of these. However I have a single car garage.

[@GasTachs]

I do drove on and off of it every time I take the corvette out. It's pretty easy once you get used to it.

[@ralphwhite3621]

What is the flooring in your garage?

[@GasTachs]

kzbin.info/www/bejne/gXPRlWqboteUias

[@trizguru7916]

Something I've been wanting to add to my garage. I like those ramps.

[@GasTachs]

A must have if you work in cars

[@wildestcowboy2668]

​@@GasTachshow much it cost boss?

[@Stephen-ut5xo]

can this lift a 1/2 ton pickup truck safely

[@GasTachs]

I mean maybe.... I do it... is it safe... ?

[@lazaronieto85]

Thank you for the link

[@GasTachs]

You're welcome!

[@amx19733]

Cool lift!!!!

[@philuent]

nice lift bro

[@MasterTechLou]

We have this same lift, I dont like that you have to add wood or ramps to use the lift,. or modify the concrete or flooring. and its too long it hits almost all the tires of each car, so its not very easy to use, cant just drive a car up, set blocks and lift. Useful but a pain at times.

[@GasTachs]

I think any type of "on ground" floor will have these problems. the best solution would be to out one in ground.

[@MasterTechLou]

@@GasTachs you are right, sucks to have to buy something and then make it work for you. Appreciate the video. 😊

[@LSMykie]

I definitely need those lifts!!

[@frankrowan1249]

Like this lift

[@Epiphoneman331]

I might need to get one

[@GasTachs]

Makes my lift easier, I would recommend!

[@markynets]

Is it safe to leave that lifted for too long?

[@GasTachs]

Yes not problem, there are manual welded stoppers that engage at rest

[@kindercarcaredetailing4768]

I've had mine for about 2 years and was told my Twin Busch not to lift trucks because they aren't balanced and of course the bulk of the weight is towards the front and could damage the lift. Ha e you had any troubles lifti g your trucks?

[@GasTachs]

The biggest issue I have had is if the weight is not centered left to right the lift does not like that. Other than that all good

[@muhammadkhaleed4894]

Thank you!!!

[@SanDiego_VDubLife]

Wow. Pretty sweet

[@stingk5295]

Great Show Dude!

[@streets8755]

I need a lift...and tools!

[@Stephen-ut5xo]

does work with all width vehicles?

[@GasTachs]

I've had some wide cars and suv's on there but I dont know about all

[@CrazyWillie01]

Great vid

[@052188joseph]

I love that lift!

[@GasTachs]

Me too!

[@calvinmathews9277]

Thanks

[@GasTachs]

No problem

[@vennieramos7890]

I copied another persons comment but Is it safe to leave that lifted for too long?

[@GasTachs]

Yes not problem, there are manual welded stoppers that engage at rest

[@vennieramos7890]

Thank you for your response, will follow your page you have great content 💪

[@JorgeRodriguez-gc1or]

I'm trying to buy one but where can I find it for $2000

[@GasTachs]

Looks like they got that post Covid pricing now unfortunately

[@kenwendorf8913]

Also the twin Busch company will not sell to USA due to electrical hook ups just got off line with them. What gives

[@GasTachs]

www.twinbusch.com/index.php?cPath=4

[@islandtime1402]

Great video! This might be exactly what I'm looking for because I have a variety of vehicles: Expedition, Miata, BMW and I really disliked the idea of going with a two-post lift in my home garage. Unlike some of the other lifts, this lift looks like it can get my Expedition up high enough to work on it. I'm going to check out your other videos to see if you have it in action with the Expy.

[@pmaint1]

Seems like a decent lift for oil changes but you aren't changing tires rotations or doing brake jobs. Still looking for the perfect lift. Good luck I know!! LOL

[@GasTachs]

I do all of that and it isn’t an issue. Put lifts on 2 trucks with the lift too…

[@jodygrady9733]

The link brings you to a lift that is 240 volt and needs a compressor.

[@allanjones6254]

I like the. Lift

[@jonathanalvarado3188]

$?