Best Linear Power Supply by IanCanada

[@Roger-lz9ro]

Been waiting for this Video for a while, nice to have simpler options then just the huge supercapacitors I like how you explain things in simple terms and you genuinely try to include everyone from novice to expert. So a big Thank you.

[@Gabster1]

Thank you, and yes I hear you a lot of people want simple but great options.

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@TerenceKearns]

I'm not at all experienced with electronics but you made this look quite accessible. I might even give this stuff a go.

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@jctai100]

This is going to be my start in DIY, thank you. Could you maybe do a video on the type of starter tools one can get at the beginning?

[@Gabster1]

Sure will do good Idea

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@universeisundernoobligatio3283]

Give us some spec's on this power supply. Ripple under various loads? Spectrum under various loads? Voltage stability under various loads? Voltage stability under various loads at various temperatures? EMI emissions? Super cap sag V=(IT)/C Using a USBC cable adds lots of R to the circiut causing voltage drops under load.

[@darrenschmitz2712]

I literally was hoping you would make a video on this product! Thank you.

[@darrenschmitz2712]

Would the Triad Transformer you use for 5v be the VPM12-2080? How tight of voltage regulation does this PS have?

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@mhsherman04]

Hey Gabby, At 20:12 in this video you show some screens of a diagram showing the hammond 1182N6, I just downloaded Ians LinearPi MKII manual v 1.5 and its not there...any hint on where to find this ?

[@Gabster1]

it is in the UcConditionar pro manual page 8 🙂 github.com/iancanada/DocumentDownload/blob/master/UltraCapacitorPowerSupply/UcConditioner/UcConditioner5VUsersManual.pdf

[@mhsherman04]

@@Gabster1 Tx!…Iwaslooking in the LinearPi manual!!

[@guidopruckner347]

Hallo Gabster - thank yo so much for your great videos. I've already built a DAC similar to yours with OPA861 with this linear power supply and the UcConditioner Pro5V. It sounds really great. I've two times 9V DC for charging the linear power supplies for +/-5V. When the UcConditioner Pro5V is switched on again, it takes some time until all the flashing lights go out and the supply is constant. Perhaps it is better to leave the system switched on all the time. Thank you so much for your great work and inspiration, also with the song suggestions!

[@Gabster1]

Thank you I turn mine off when away for safety but do power my system a few min prior to critical listening. I think it depends how long in between as it can eventually drain.

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@dana0001]

Thanks for showing this particular build. Now I have some more summer projects to do :-)

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@edgoewie2132]

Hello Gabster, you should put a link to your tutorials on Ian's marketing thread because the number of people that do things in a way that is described as wrong in the manual is rising. Ian has not visited this site for more than a month now so it would be good if you would spread your knowledge a little further before someone has to call the fire brigade. Greetings,Eddy

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@ABadHabit1]

Hi Gabster, where did you get the stand that your oscilloscope and waveform generator are sitting on?

[@zack2147]

Very nice, simple and great things we can use, thanks!

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@wym0214]

Hi Gabster Is that possible 5v UcConditioner work on 3.3 v ? I want to change the voltage if it is possible . Thank you

[@Gabster1]

Ian sell 2 versions a 5v and a 3.3 you can not change the 5v to 3.3 as far as I know at least without changing components

[@JRadian]

If supplying 5V to something like a USB card or DDC via these supercaps, does it really make an audible sound quality difference whether you are charging the supercaps via something like iFi 5V DC wall wart or the LinearPi? I presume if you uplug the iFi or LinearPi, audio will continue for awhile and sound the same as with one or the other charger?

[@Gabster1]

a minor difference yes. Unplugging it shuts it down

[@philhebden374]

also for longer lengths could i wire from the kelvin sense outputs and the 5v ones to the two wires of the usb c pigtail by soldering them? so 5v+ and s+ soldered to the v+ of the pigtail and the same with the V- side

[@Gabster1]

Yes you can just watch the polarity and that it is indeed the USBC pigtail ideally the shorter and thicker the wire is better. I use long wires for testing as it is easier but once you settle on a system keep them as close and as short as possible also twist the wires for long runs.

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@jimmidtun4373]

You are talking about 6 + 6 V, in Your video but You are linking to an 12 V Power Transforer VPM24-2080 ?

[@Gabster1]

6v input for 3.3v and 5v output. 12v AC input for 12v output see the Manal as it goes in detail what voltages to use and when.

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@stephanespohr886]

Hello Gaby, thanks for this great informative video ! Do you remember a special reason causing the showed 450F supercap to start swelling (over-voltage, over-temperature ...) ? I also use a 5V Uc Conditionner module in my setup but was assuming that the supercaps are reliable - as long as the normal use conditions are respected. Thanks !

[@Gabster1]

No real reason I could see but there is an unofficial recall on those particular caps and they have been discontinued. It can also be the board or balancer that is why I prefer 3v for a bit more safety margin

[@stephanespohr886]

@@Gabster1 OK thanks, in other words it is safe to check from time to time ...

[@Eddy-gr5wm]

@@stephanespohr886 Hello, Once there is a small difference between the voltage on the individual caps mounted in series will this stay the same during their lifetime? If there is something wrong in the board or balancer will it get bigger and eventually end with one of the caps exploding? We have read about caps not properly soldered. Of course if things are perfect during the first week after numeral recharging cycles things should remain like this forever because caps are sold having no problem with huge numbers of recharging cycles ( here they are not used until nearly empty so they have a very easy life). When caps will '' pop'' they will do it pretty soon. It would be weird to keep a schedule for checking the supercaps in your gear. After a year of weekly checking people would probably start skipping some checks and then suddenly coming home from work you will find your house burned down? Maybe add an additional safety circuit that can be switched while you are not listening? Greetings, eddy

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@jacquesb5248]

very interesting, pitty there is no 12V ed, there is i didnt look properly. tad bit pricey for me as i just need my output to have like 5seconds as relays switch over

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@tommiranta8817]

How would you compare the LinearPi to using a PurePi w/ a Ifi PSU? I'm looking for a cost-effective solution with 3.3V and 5V outputs. I guess they're quite comparable in price. What are thre pros and cons? Which option would you recommend? E.g. the LinearPi can be upgraded with ultracapacitors at a later stage if wanted.

[@Gabster1]

I would go with the pure Pi it is a great value also serves as a base for your system and has many features of all Ians products the PurePi as the best $ you will spend

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@Eddy-gr5wm]

Hello, Of course every product made available to consumers should have the right safety features so it wont burn down your house. A proper mounting in a chassis with the right properties should be mandatory. In a situation that could lead to a fire/explosion there should be something like a fuse that will protect your belongings. Inform yourself about which means to use when your gear starts burning. Greetings, Eddy

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@Nightjar726]

What’s the rest of the circuitry on the board of the capacitors ?

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@davidbrown8230]

I need a LPS that outputs 9v and one for 12v. Is it possible to configure this set up to run those voltages?

[@Gabster1]

12 yes but not 9

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@philhebden374]

how do i connect the 5v board with the cap board to my pi? Do i need to create a usb c pigtail cable? most i've seen are only 22awg cables is that ok?

[@Gabster1]

For a Rpi you are ok but try to find a very short one you can also make your own

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@Elberoth]

What is the difference between this UcConditioner PRO version and MkII ?

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@kevindewinter8235]

Is it possible to ad super capacitors to my already owned 8 lineair power supplie? Bought all last months :/

[@Gabster1]

if they are 3.3v or 5v yes

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@yellow_noise3]

what is regulating element in LinearPi MkII? other words - what is under the heatsink? 0.8uV voltage noise is very impressive low value, I am curious what exactly makes it so good.... also, HOW IT SOUND???

[@Gabster1]

I would ask Ian as he does not disclose any schematics and I understand why with the increasing copying. I plan a testing video sometimes soon. Sound varies some circuits are very sensitive and benefit a lot some do not for example dac clocks or a tda1541a chip are very critical vs a Protodac not as much.

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@Eddy-gr5wm]

Hello, Please bare in mind that Ian has not been online on the famous Americain diy audio site for more than 5 weeks now so we should rely upon other users with more experience once we ran into trouble. If you are willing to take the risk go ahead. Of course if you just copy exactly the '' constructions '' shown here it will be okay unless you introduce some bad solder joints which seems to be the number one cause of mistake if all other instructions have been taken seriously. Greetings, Eddy

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@JBernhard72]

Nice to have great options!

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@mathtrixmusiclix4248]

Anyone know the total cost?

[@darrenschmitz2712]

The toroidal power supply can supply (2) of these boards, ($109) is between $60-$80. So for its about $200 for (2) complete power supplies + shipping/ taxes. Shipping isn't cheap, I think it was $30 to ship (2) boards to Wisconsin.

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@anwin85alon]

​@@darrenschmitz2712pm me can you to install do solar panel of charger,

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@anwin85alon]

​@@darrenschmitz2712pm me can you to install do solar panel of charger,

[@audiononsense1611]

If I wanted a replacement P/S for an existing component do you do custom work? If so PM me...

[@Gabster1]

I wish I have the time if you have some diy knowledge start small the linear pi is a good safer option that you can add to later Or ask a friend or local technician 🧑‍🔧

[@colinbell8231]

Really interesting components, and thanks for bringing them to our notice. Was a bit underwhelmed by the technical specs on the supplier's site: or their lack. No mention of their power rating or current rating (a key component for a POWER supply), nor the need to feed from a low-voltage AC supply. Download and read the User Manual to discover this.

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@rcobsesssed]

Love this kind of content, thank you for sharing!

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@Nightjar726]

Those capacitors don’t have Explosion protection btw. CDA makes other caps that do.

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@super80hz]

hi gab, this was a great video. But could you adjust your mic position in the next video? the mic being at your chest level makes it quite hard to decipher certain words. Thank you!

[@Gabster1]

Will do thanks for letting me know :)

[@anwin85alon]

pm me can you to install do solar panel of charger,

[@МихаилСеров-ю6о]

Очень достойная реализация!

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@AverageNiceGuy]

Thank you Mr. Gabster 😎👍

[@anwin85alon]

pm me can you to install do solar panel of charger＋

[@ronfreeman4687]

Hello

[@anwin85alon]

pm me can you to install do solar panel of charger,