Best new beginner printer? Anycubic Photon Mono 4 Ultra Review & Making Scylla 😱

[@RubiGamingx]

Use for referral link to make any purchases like printers or resin store.anycubic.com/?ref=Rubistudios3 when using it make sure to apply my discount code Rubistudios3 to get $25 off on all things you buy.

[@KaijuRaiden]

How is it compared to the orange 4k?

[@RubiGamingx]

In terms of quality this is superior by far both in features & thanks to the 10k high precision, specially for the price. I don’t think you can get anything better than this.

[@9thNazgul]

What slicing software do you use? I was using Lychee, but they don't have the Mono 4 available on there.

[@RubiGamingx]

Currently no other slicer has the profile available, The only one would be Anycubic but I had a hard time using the supports. They have the regular Mono 4 available but not the ultra, I was given access to a special version with the ultra profile available.

[@Mrrexsirpentiousfan]

Question which website I could print this

[@RubiGamingx]

Can you be more specific on which figure?

[@Mrrexsirpentiousfan]

Scylla

[@RubiGamingx]

@ you won’t find it online because it’s designed by our team.

[@Mrrexsirpentiousfan]

I see okay

[@kaiju-odanny9778]

Cool, congratulations on getting yourself a very nice, adorable and best 3D printer machine! I’m definitely thinking getting my own 3D printing machine since I wanna create my own articulated figures though that I’m simply a beginner at least. BTW, I’m still waiting patiently for Hiya Toys to eventually make both Final Wars Godzilla and KiryuGoji (Godzilla 2002) since you stated that Hiya Toys have some Millennium Godzillas like GMK Godzilla and Godzilla 2000, therefore, an continuation of sorts. Again, regarding about this video of what the brand-new 3D printing machine could help inspire me to create Devilman, Mazinger, Godzilla and Kaiju in general like Gorgo, Yonggary, Pulgasari, Reptilicus, etc.

[@RubiGamingx]

This could probably be the printer for you for the price, It has amazing features and without a doubt top quality. For Hiya toys give it time they already said they’ll eventually to most of the Godzilla figures, specially for Godzilla evolve It’s a good sign that we’re seeing significant upgrades.

[@kaiju-odanny9778]

@@RubiGamingx Why thank you for the compliment there. Although I’m not into 3D printing but someday, I could make my very own figures or customized accessories in the future if I’m getting really good at it. Oh yes, I see what’d you mean there. Honestly, I’ll give Hiya Toys plenty of time since you stated that they’ll eventually do most of the Godzilla figures like how they showcased a prototype of an upgraded articulated Evolved Godzilla due to customers feedback. So hopefully, before the end of the year either be November or December, we’ll eventually get the Millennium Godzilla figures completed since it’s a matter of time when they’re going to do Final Wars Godzilla and KiryuGoji, eventually sooner as we expected.

[@StabbyMcStabwood]

I bought an Anycubic mono 4 ultra, and it was absolute trash. For example, it was taking 10 1/2 hours with stock settings to print 440 layers. Just before anyone assumes it was user error. I followed the setup guide, I was using Anycubic resin, Anycubic slicing software, up to date firmware, and doing everything correctly. I went back and fourth with support for days. It would print the first 51 layers then slow to a crawl. I had a 1200 layer print take 34 hours to finish... At one point they even wanted me to replace the LCD, on a brand new machine... They finally offered me a replacement printer, but after my experience, I dont know if I even want another Anycubic machine.

[@RubiGamingx]

I wouldn’t go as far as calling this printer trash, It’s been highly praised by even professionals. I can already tell just by what you told me you’re not dilating in your exposure settings correctly. It shouldn’t be taking over 24 hours that’s just insane, mine only takes 2-4 hours with what I’ve printed at the moment. I recommend you to please watch beginner videos for exposure settings, learn the basics. I’m sure your printer was perfectly fine. It’s just about learning the ways around it.

[@StabbyMcStabwood]

If you can tell that from reading what I said, you didn't actually read what I said. STOCK SETTINGS, aka the preset values for the printer and corresponding resin. A layer 52, regardless of the file I'm printing, it begins to pause for nearly 2 minutes at the start of every layer. Then the light comes on, and exposure is only 2.6 seconds. I can see the light come on through the vent on the side. It even happened with the file they sliced and emailed me. I didn't change anything, loaded the sliced file into the Anycubic slicer and sent the print to my machine. Still over 10 hours for a 440 layer print using less than 10ml of resin. They offered me a replacement because support can't identify what's causing the issue. Sometimes companies just send out bad products. Don't make yourself look foolish defending it.

[@EvolvedGodzillaKidandCo]

I need the Scylla!!

[@R-K-M708]

Who made the Scylla figure?

[@RubiGamingx]

That’s our design made completely within our team, it was a perfect time to showcase it here.

[@R-K-M708]

@@RubiGamingx is it available to purchase?

[@RubiGamingx]

@@R-K-M708 here’s a link instagram.com/rubi_studios3/profilecard/?igsh=dmIxOG9mbHpyM3p2

[@NKRGadanG]

Is that Scylla scale to HIYA or S.H.M?

[@RubiGamingx]

@@NKRGadanGyes

[@Mgman_423]

Bro the minus one fig looks 🔥

[@RubiGamingx]

It does look awesome if I print it bigger it would look better.

[@tyrannusdante8246]

Whitexican deja de negar tus raíces wey tienes el nopal en la cara porque no puedes hacer videos en Español acá también hace falta más personas como tu

[@kneckno8356]

They added a corona mask?? Wtf

[@RubiGamingx]

Relax, let me explain 3D Printing with resin is extremely toxic and can seriously cause health issues, it’s necessary to always use a mask or even a respirator for extra protection, otherwise you can end up in the hospital. 2nd it’s always necessary to use gloves, touching resin directly can cause damage like burn your hands.