Best Paint Touch Up for Deep Scratches on Car

Become a member of the community and donate to the channel.
Thanks everyone!!!
/ @amddetailing
#best #touchup #scratch ‪@Amddetailing‬ #amd
In this video we finish the Audi A6 and its transformation and fix a deep scratch with a filler pen.
Be sure to watch all 3 videos to know what we talked about and what we showed.

[@amatorotodetayamateurdetailing]

You are master of detailers. Good job Man.

[@Amddetailing]

Tnx friend

[@martinlandaverde403]

You make it look easy,as always😃saludos from California.👌

[@Amddetailing]

Tnx my friend enjoy

[@southernutaharmwrestling2903]

Thank you

[@zack1915]

Kao i uvijek fenomenalan, poucan i brilijantan!!

[@Amddetailing]

Hhvala prijatelju

[@kushtrimismaili786]

In the end the result pays off 😍

[@Amddetailing]

Tnx my brother😘😘😘

[@zoltanlucian]

This is incredible!!!

[@mayursinghcharan9329]

Fantastic work sir

[@Amddetailing]

Tnx

[@jkbk121]

very nice job and video editing 👍

[@nabilaldhaleai5213]

Awesome work , always learning from the best (YOU)

[@ShafqatAhmed]

Excellent work

[@Amddetailing]

Tnx

[@nooraldeen564]

Creative as always

[@iamdenioz]

I love your job!

[@Amddetailing]

Tnx my friend

[@detailersgarage]

Great work!! Very impressive.

[@Amddetailing]

Tnx friend

[@milancanic8047]

Zadovoljstvo je bilo gledati! 👌

[@Amddetailing]

Hvqla prijatelju

[@2livedave]

Good Job AMD !!!!

[@Mr.johansson]

Wonderful job 🤩🤩

[@Amddetailing]

Tnx my bro

[@theogi8375]

Excellent , bravo !

[@Amddetailing]

Tnx bro

[@luisalbuquerque724]

Congratulations 🙌 amazing job 👌 can you let me know where we can purchase all the materials requested to do this kind of art?

[@Amddetailing]

a store that sells car paint

[@JAYS-h3b]

true professional

[@Amddetailing]

Tnx

[@prika58]

Odlicno kolega,jos ti samo treba ploter za ppf i imas sve za vrh👍

[@Amddetailing]

Hvala prijatelju,a za foliju to saljem prijatelju ako musterija hoce akp nece stavlja se keramika i nema problema

[@joseenriqueortuno1092]

From Spain. Good job and spectacular finish for a piano black, very difficult. One question, can you provide a link where to get the UV clearcoat? Touch Up Pen is 0'5 ir 0'7? Thank you

[@Amddetailing]

Tnx friend pen is 0.5mm and the UV coating, try contacting the MIPA official website and see if they have a distributor in Spain

[@joseenriqueortuno1092]

@@Amddetailing Thank you. I will see you again on your KZbin channel

[@vakhochachkhiani7743]

I Have no word 👍

[@Amddetailing]

Tnx friend

[@pflarini]

Thanks! A guy make a bad job on my car. Is it possible to remove old filing and make again?

[@Amddetailing]

very difficult, because it has already reduced the thickness of the factory coating

[@ramoonick]

Please put the link of the tool used in the description, thank you❤❤❤

[@TheUpliftingGuy]

Can I buy Mirka Shark Blade and use that instead of Mipa scraper blade? Asking since where I live the Mirka shark blade is a little bit cheaper or does the Mipa blade better job and has more features somehow?

[@martinmareco8768]

Excelente trabajo!!! Quiera saber que es la chapita cuadrada que le hizo como último paso después del lijado!!

[@eferinho]

Ozbiljan projekat i rezultat, svaka cast.. Koja je zastita gore?

[@Amddetailing]

Hvala a na auto nije isla nikakva zastita musterija nije htjela

[@carbonoxx]

so what paint, only mix color with clearcoat? thats all?

[@waleedayad7227]

❤❤❤❤❤

[@teofiksesartic6601]

Hello, I can see that you doing great job , so in that case I have question ?

[@sasamilojevic46]

🔝🔝🔝 Napisao si da je boja razredjena. U kom procentu i cime?

[@27whatever]

From Malaysia🇲🇾 The result is amazing. My car is Meteoroid Gray Metallic, should I mix the paint with UV coating in stead of Handener & Clear Coat?

[@Amddetailing]

Yes ,you can I use uv because it works fast

[@rykidong4704]

Hi sir My car paint is sliver couple days ago got the deep thin scratch. So i purchased the touch up paint pen, how can i blend two paint more matching. Cuz right now the new paint was like uneven. Thank u

[@gbmwp]

What do you think. Is it possible to do the same with the alloy wheel? Have you tried it?

[@Amddetailing]

Of course

[@cankanturk7400]

Which is the best product you would recommend? There are not many brands in my country.

[@thilos.1546]

@Amd detailing Why do you use the Mipa scraper after the Mirka file? In your other video you only used the file and it looked perfect. Is the Mirka file not enough to get the job done?

[@Amddetailing]

It depends on whether the coating has dried enough and I always try both, which removes better

[@thilos.1546]

@@Amddetailing which one do you prefer if it is fully dry?

[@s1003232]

0:35 is what I currently have, how do I go from there?

[@chitotanada1389]

where did you buy the mipa scraper?

[@paweltodudek]

Could you add links to devices in description?

[@johnmayo7389]

Hi I have a Mazda with a paint code of 41v soul red I think it's a 3 stage paint how would you fix this type thanks in advance great video by the way

[@Amddetailing]

The three-layered one is difficult to remove, because it is too transparent and does not stay well in the scratched part

[@summerforever6736]

Can you recommend a good touch up paint brand?

[@Amddetailing]

Try color system

[@MichaelAMangone]

Trying to find a MIPA fast hardener equivalent in the US to mix with base color for filling chips and scratches. Would Restoration Shop's AE3001 Enamel Wet-Look Hardener work?

[@Amddetailing]

I have Mipa UV 1k Clearcoat dry for 5min

[@firstnationsindian8062]

I need more information on this Mipa coating scraper. Where can I purchase one?

[@Amddetailing]

Mirka official site

[@sull5307]

Pozdrav, sa cime da razblazim boju? Da li mijesas boju sa primerom prije ili ? Hvala

[@Amddetailing]

paint is diluted with acrylic thinner

[@sull5307]

@@Amddetailing da li mogu sve pomijesati odma, ili bi trebao razblaziti ranije boju i ostaviti neko vrijeme ?

[@Amddetailing]

@@sull5307 svee ti je obajsnjeno u videu boja se razrjedzuje akrilnim razrjedzivacem

[@sull5307]

@@Amddetailing kontam, nego mislim da li trebam je ranije razrijediti ostavit, ili mogu sve ovo pomijesat (sto si naveo u klipu) prije nego pocnem.

[@sull5307]

@@Amddetailing pokusacu ovaj vikend da popravim ogrebotine, ako zajebem organizovacu termin kod tebe kad budem u Sa haha

[@gols_garage]

Hi! when it's necessary to add hardner into the paint?

[@Amddetailing]

Yes

[@gols_garage]

@@Amddetailing WHEN?

[@vladimirkostic2564]

Doktor!

[@Amddetailing]

Hvala prijatelju

[@sasamilojevic46]

Wow 👏👏👏

[@mayursinghcharan9329]

We can use sand paper this process skip you using eqment sir ?

[@Amddetailing]

Yes

[@mayursinghcharan9329]

We can use sand paper bro?

[@domenicobizzarro839]

I'm really frustrated. Trying so many times to perfectly level the filled scratch but never succeed. If i use Mirka scraper I do a lot of scratches around. If I use Mirka shark blade it removes also the fill in paint. If I grind, even with a 2000 with water, my fucking test-hood's clearcoat always burns in some spots around. How could arrive to your perfection level ? :-( in this video the scratch's edges seem completely disappeared. Is like the deep scratch has never been there... If I try the same process the scratch is filled but not levelled to the rest of the clearcoat or the edges are still visible

[@Amddetailing]

you have to train constantly and you can't stare when you do this

[@alaaomraneg]

Why didn't you you use a hardner with this one?

[@Amddetailing]

hardener does not go into the UV coating, watch the video carefully

[@DarkAngel-vs3om]

What if I touch up scratch and it stays for few month and fully cures will this still work? Or needs to be all done while paint is not fully hardened?

[@Amddetailing]

Yes

[@DarkAngel-vs3om]

@@Amddetailing yes to 1st or 2nd question?

[@zzo28]

​@@DarkAngel-vs3om you can fill the chips and scratches and let it days, weeks, months. U can make some leveling, saanding.. when you will polishing the car if you dont do it at one time. In this case u dont need uv clear+uv light. Use maybe hardener+base paint. Its cheaper and easier becouse u dont need hold uv light 5mins on each painted demage.

[@MK-pk9gh]

What size fluid Pen ?

[@Amddetailing]

Size is 0.5mm

[@ozp11]

What is the specification of the UV light?

[@zzo28]

This is mipa mini uv. 395nm. Price +-90€. But u can find some cheaper around 20-30€ . Maybe Yato YT-08582 can works well.

[@zzo28]

Or this one Kunzer PL-023.2 UV UV LED 40-50€

[@kroks06]

omg 35 hours! wouldn't it cost less to just repaint? :)

[@takimakikaki]

Repainting a relatively new car causes a decrease in value when resell.

[@salatproduction]

Ага. Антисиликоном протер и краска саламалейкум.

[@PeQ64]

1 car and 500 gram compound 😬😮 not to mutch?

[@Amddetailing]

it is too much because the average is around 150 to 200 grams