Best Steam Cleaner? Dupray Neat Steam Cleaner vs McCulloch

[@debbyd5729]

Just bought the Dupray Neat and I’ve been enjoying it. I have an older home and it get grimy quickly. The cleaner instructions does say you can use tap water or distilled but it says to drain before storing and to flush out the tank after every 20 hrs of use (if using tap water). The reviewer didn’t mention that she does that which could be why she has all that build up in the tank. To flush, fill the tank with 50% water/50% vinegar. Let sit overnight. Then dump it out before filling with water for use. Hope that helps!

[@icantdance6813]

How long do you have to wait for the green button? Do you have to stop often to wait for ready again?

[@CleanFreakGermaphobe]

It takes about 8 mins. You only stop when the steam starts to die down and you need to refill. Usually after about an hour of cleaning. In that case, you have to let it cool down completely before removing the lid, adding water (I'd add hottest you can get the tap water, to speed it up) and then wait for the green light.

[@washingtonquintuna7619]

Thank you so much for your wonderful information my question is if I clean the walls in the bathrooms or showers do the grout or the silicone will get damaged.?

[@tribulationprepper787]

@@CleanFreakGermaphobe The next McCulloch model up, the 1385, will give you twice the "trigger" time as the Neat before refilling.

[@PinkFlowers365]

ty

[@andyh5224]

I’ve had the Dupray Neat for about 3 years now. It’s starting to get tired and definitely produces more water than it used to, so jobs get messy. Still cleans great though. I would recommend using nothing but distilled water to avoid calcium build-up. Also when filling up, keep the trigger held down and the water will go down fine, no bubbling up!

[@veniestagourdine3881]

That mineral deposit build up is no joke , mines stopped steaming because of the build up . I use distilled and purified water and still build up . Wish there was a better way of cleaning the water well as I’ve noticed that no matter what you do there is always water left behind. I never leave the plug on when stored hoping the well will dry completely when stored .

[@phoeberoyer72]

In 3 years , do u need to get the replacement? I read comments saying hard to get those brushes head replacement. Any experience to share ?

[@mad5210]

Thanks for the video, I was leaning towards the NEAT before watching the video but you're review just made up my mind. Also a clean freak like me finds it satisfying watching cleaning videos. LOL

[@thirstyboots6711]

I own a McCullough lower end model and in the past the Wagner version. I prefer the Wagner one. And it came with a wallpaper removal attachment that was wonderful.

[@CleanFreakGermaphobe]

Thanks for the feedback. Hopefully we can review the Wagner which seems to be a lot like the Home Right.

[@unnamed2737]

Can you use any other flat attachment and do the same thing?

[@airdromeaccount7922]

I actually bought the MC on amazon, then found this review and then canceled the MC for the NEAT. Glad I did. The hotter temperature and consistent steam production plus a better hose is what sealed the deal for me. My primary use will be cleaning my vehicles interior and engine compartment. Thanks for the great video!

[@zamirrudon]

Any feedback on how it worked for your auto Detailing? I'm starting my own and looking for a steamer, some MC reviews led me here

[@airdromeaccount7922]

@@zamirrudon Dupray has since launched a newer version of the NEAT which heats up faster. If you are going to use a steamer for detailing I would look into the newer version. Time is money.

[@zamirrudon]

@@airdromeaccount7922 thank you very much!!!!

[@samuelsdaddy9703]

The Dupray Neat is on the top or near the top of so many reviews. I was still on the fence as what to purchase. This video helped me decide on the Dupray Neat and that is why I am sharing my experience. Based on customer service alone I would not recommend the Dupray Neat. I recently purchased the Dupray Neat and I have to say their customer service is not friendly nor helpful. I made the purchase from Amazon and received it the next day. I was super excited to receive it so quickly and to get started. I agree with filling up the Neat and how the water can run over. It even did that when I held the spray button down as advised by the Durpray video. Emptying it is very difficult. The Neat put out a lot of water and did not clean my grout well. The Nylon brushes do not hold up at all. The metal one pulled grout out. I worked from at least one in the afternoon until 8pm on the shower and small area of grout on the bathroom floor. I had to do a lot of scrubbing. I had to refill the Neat multiple times (at least 4 times) just to do the shower. Having to wait 20 minutes to refill and another 8 to reheat each time proved to be quite a pain in the rump. I would have thought that one fill should have done a shower, but I refilled it no less than 4 times for an average size shower that honestly wasn't that dirty. Most of the grout still isn't anywhere near the color it should be after hours of cleaning. i feel as though I wasted and entire day. I gtried another day and finially got so frustrated that I just stopped. Now the bathroom grout really looks weird. I am in the process of returning the Neat Steam cleaner. I contacted the company about the large amount of water that i was getting and the fact that it really didn't seem to be cleaning any "better" (their claim in the Amazon description) nor making cleaning grout any easier than with a grout brush and a chemical. I also told them about the nylon brushes not hold up and the metal one pulling out grout. The area of grout that did turn out well I had to use a chemical cleaner with the Neat. I may have got 40 minutes of cleaning each time. Dupray wants me to video my issues and email it to them. They will then analyze it and let me know. After not receiving an email for well over 24 hours, I had already boxed up the Neat to return. I had explained in the email that I was planning to return since purchased through Amazon i was just reaching out to the company to see if any special instructions since it had been used. The emails have gone back and forth for days. They do not respond to my responses quickly. My return window will be up in a week. Each email was the same. I would explain there isn't anyone here to video. I have a medical rocker boot on. To video with a phone and be in water with a boot would not be a good idea and then flat out ask if I ruined my phone would they replace it. Finally, a response that since in the first 30 days, I could return it for a refund or they would replace it. Still did not address the fact that I had used it and would i get a full refund. I responded to the emailed that I wanted a refund (I had put that in every email) and have not received a response and it has been approximately 20 hours. Although, Dupray may make a great product the customer service is not up to par. I would accept the replacement, but I don't want to have to deal with the customer service department again if there is an issue. I called McCulloch yesterday and was asking about the 1375 verses 1385 verse the 1275 just to find the best fit for my needs. The person was extremely nice and helpful not pushing any particular product over another. I was really impressed. If I had an issue it may not have gone so well. IDK. Maybe if I had called Dupray verses email it would have been a better experience. I want to order another steam cleaner, but I am not sure which to order. Not sure if McCulloch is what I need or not. This was just not a pleasant experience. I just wanted everything in writing. That comes from experience of buying a new construction house 2 years ago. -Jennifer (just realized i am under my husband's account)

[@221b-Maker-Street]

JFC, you are *_exhausting._*

[@Ddjfhfjfj]

What about Karcher SC5 ?

[@redapproves1330]

Never used a steam cleaner before and find this video very helpful. Thank you!

[@CleanFreakGermaphobe]

You're welcome, we're big fans here!

[@BillDerr]

Just to clarify something with about the temperatures you quoted. Many companies advertise the temperature of the water in the boiler, but not the temperature of the actual steam where it comes out of the hose. The MC machine is actually referencing output steam temperature, as 212ºF is boiling temperature of water. Since the boilers are sealed while in use, you need the water to exceed boiling temperatures to generate any useful pressure. At 58psi that you state for the MC, the boiler temperature would be 290.5ºF. The Neat with a boiler pressure of 50psi is actually at 281ºF. The output temperature will usually drop considerably as it's no longer being heated by the heating element once it leaves the boiler, and it has to travel through a hose which causes it to cool down. As for warranties, having a lifetime warranty on a boiler isn't going to matter as I can guarantee they won't repair it. The machines simply don't cost enough to actually replace parts on it. They instead would offer a deal to simply purchase a new machine instead (in fact, that's exactly what Dupray does). Labor costs to replace a boiler on any machine would not be feasible in this case. It would take 2-4 hours to replace a boiler, and with the average cost of labor for repairs, it would just be cheaper to replace the machine completely. They will simply offer to replace the machine for a discounted price (say 1/2 off or something like that). But the thing that you don't know is that the new machine doesn't carry a warranty on it, as it maintains the warranty of the original (non-working) machine. So if something is to go wrong with it after that, and if it's not a boiler issue, you are S.O.L. at that point and would need to buy another machine. Dupray is also a Canadian company. They don't have a US office location. The US address they list is actually a UPS store location. So if you are in Canada, Dupray might be a better choice here. When you buy cheaper steam cleaners, they typically will not last that long. They are not bad for home owners, but anyone serious about cleaning or deciding to make a business out of it, you will want a professional grade machine (~$1000 or so). You want to also drain out the boiler after each use (let it cool down first). This is important as the water you add to the boiler has minerals in it. When it boilers water into steam, those minerals are left behind in the boiler. If you don't drain out that water, you'll end up with scale and calcium build-up in the boiler, and that will coat everything and begin to harden over time, even if you use distilled water, as distilled water still has some minerals in it. This will affect how well the heating system works and can cause the heating elements to fail, if the boiler has an internal heating element in it. And you also want to store it where it won't freeze.

[@CleanFreakGermaphobe]

Bill, you sound like an expert! Want to do a video for our channel about this? I'm serious. Thanks for all the info. I did have a problem with my Tosca. A $900 machine. I sent it back and they sent me a new machine which has been going strong for a few years. I don't know what the issue was it even if the machine I got back war the same as the one I sent. I wish they would advertise the heat when it comes out of the machine. It makes it easier to compare. For most jobs and people it's enough to get the job done.l, as you said.

[@tribulationprepper787]

@@CleanFreakGermaphobe If you have one of those hand held laser thermometers, You could do a test at the steam outlet. the results would be good to know when choosing which of these two machines to purchase. You are right about Bill... His testimony would be interesting and apparently revealing. What he wrote about the temperatures not being compared, "apples to apples" make sense since un-pressurized water becomes steam at 212 degrees and not a degree earlier. Thank you for your very detailed video. Take care

[@tribulationprepper787]

Thank you Bill. I have been wondering how the Neat was able to make 275 degree steam since un-pressurized water becomes steam at 212 degrees and not a degree less. It seems that the quoted 275 degrees is in actuality just a wee bit of deceptive marketing. I would guess that ambient temperature would also play some part in the effectiveness of any steamer unit. Thanks for ALL the good info. Take care.

[@CinHalCedHerChance]

Holy geez 🤦🏼‍♂️🤦🏼‍♂️ don't think you wrote enough

[@islandantoinette]

It Is important that knowledgeable people write what they need to. I For one appreciate all that people here have said if you don’t like it I guess you don’t have to read it but some of us really want to be serious about these products.

[@motorcityjudy]

I just purchased the Neat too! IT'S ON SALE EVERYBODY, $149

[@gladysa9203]

Do you still like your neat?

[@motorcityjudy]

@@gladysa9203 I still love it, it makes cleaning actually fun.

[@gladysa9203]

@@motorcityjudy thanks.... i want one also... but still thinking if its better than a hand held steamer.

[@yvonnesmith2578]

This was one of the most detailed & informative videos I have ever seen. So impressed, I immediately subscribed to your channel. Will probably get the Dupray. Really want both! Lol

[@CleanFreakGermaphobe]

Your comment made my day!! 🙏 thank you and welcome!

[@clintgrimes628]

Great video, thanks. If you put a straw down the hole and to the side to let out the air, water will fill the boiler much faster.

[@CleanFreakGermaphobe]

Funny enough there's a note on it that says you can turn it on and that creates a vacuum so water will go in easier. Great tip about the straw too!

[@rcole6679]

I went through this comparison a few years back. After reading Amazon reviews, I opted for the Dupray. It seemed to be a better built machine, though had less whistles and bells. Their nylon brushes are superior to those of hand held models. I have the Home model on wheels and love it. It only holds 23 Oz of water, but lasts long enough to get a good sized job done.

[@peterlynch599]

Is it still working for you?

[@donica5860]

​@@peterlynch599 i wonder as well beacuse amazon 1 star views has complaints about it not lasting long

[@melgod5500]

I own the neat and have done quite a few jobs with it , so I gotta like it!

[@TripthiRasquinhausa]

Can you use dupray neat on mattress & carpets & couch .

[@yodafatkitty1]

I got to 7:21 into this and went and got out my McCullock MC1375 and spent 2 hours cleaning. So, thanx :)

[@CleanFreakGermaphobe]

Love it! 😆

[@thenannerbee]

Where did you purchase

[@faithahora]

did you have to refill in those two hours? And do you find it hot enough?

[@joelnickerson6739]

My wife and I steam clean our home often because of the Covid pandemic. We use a Bissell Sure Shot that works very well. As an EMS Captain I'm researching steam cleaning our ambulance. Thanks for posting the video

[@CleanFreakGermaphobe]

Thanks, and for some reason that reminded me that I need to pull mine out today and steam my car.

[@h-tinetowing2042]

Use the neat for cars and trucks and Thor tosca for commercial

[@faithahora]

With the Bissel Sure Shot, does it have a mechanism for continuous steam without continually holding the trigger down? Also in your experience how long of steaming time do you get with the Bissell?

[@melzz]

Can you mop with Bissell sure shot?

[@joelnickerson6739]

@@melzz No. Bissell does make a steam mop. The Sure Shot is a hand held unit for cleaning and sanitizing everything else. Doesn't mop though.

[@eej902]

1:44 the Neat steamer's button has a green glow when it is hot and ready. The light turns orange when its not ready- that's how you can tell.

[@margrettawilliams4192]

Thanks for a clear no-nonsense demonstration/talk! Going for the Neat.

[@CleanFreakGermaphobe]

Happy to help, let us know what you think of your Neat!

[@walmartpimp2]

My Dyson V10 could use a best friend, I think the Dupray would be a Neat choice for it

[@CleanFreakGermaphobe]

My Dupray and Dyson get along really well so I think it could work.

[@Deklectic]

The MC 1385 I just ordered I'm excited to try it.. Mine is supposed to come with a squeegee which is perfect for windows, I decided to upgrade and try a more versatile steamer vs the Shark Genius I use which can only be used on floors and I wan't to be able to disinfect other appliances with steam. Great detailed review by the way 😉 I love reviews that break everything down about a product.. 😃

[@CleanFreakGermaphobe]

Thank you for your comment and please let us know how you like your steam cleaner. There's nothing else that will clean my heat registers (they're white and show build up, I've tried everything I could think of before using steam). Also, perfect for cleaning your car.

[@samuelsdaddy9703]

How do you like the MC 1385

[@tribulationprepper787]

@@samuelsdaddy9703 After hours of online research, I just ordered the 1385 at $199 from Amazon. The next jump up would cost over a grand and the only benefit to this more expensive machine seems to be that there are no plastic parts and that it will outlast the 1385 in terms of hours used. If I were cleaning stuff for customers all day, everyday the $1,000 steamer MIGHT be my choice (although I might consider buying five 1385's instead). I did see a $5,500 steamer which would probably peel the hyde of a rhino but we, as homeowners, made the right choice in selecting the 1385 over the competition. I'm sure of it! Say HI to Sam and take care

[@courtneyhabedank4367]

I just bought the neat! It will be here in two days so I am binge watching videos about it. ☺️😃😃

[@CleanFreakGermaphobe]

You're going to love it!

[@Beryl1234]

I just got mine today! :)

[@tdan4301]

I just ordered mine today now I'm watching all kinds of videos on it. Lol

[@sensimania]

Did it meet your expectations?

[@JARyan9]

Any update here about the neat gals?😊

[@MamaSwede]

I'm so excited for my dupray to get here! I ordered it the other day. I guess this is what being an adult is. Getting excited over new cleaning stuff and appliances 😂. Have been binging your videos for awhile now and I love them! Totally gets me in the cleaning mood when I am in a funk.

[@CleanFreakGermaphobe]

This makes my day! Thank you for this comment. You'll love your Dupray.

[@MamaSwede]

@@CleanFreakGermaphobe so far I really really love it! I do not know how I survived without one! Only sucky things I've found are the floor cleaning attachment the clips already have popped off and it was when it was sitting there waiting for the water to heat and I wish the cord was easier to wrap up. I've been tackling everything in my apartment even the ceilings 😂

[@citizencoy4393]

@@MamaSwede do you still love it?

[@MamaSwede]

@@citizencoy4393 100%. I still really love it!

[@citizencoy4393]

@@MamaSwede I just got mine in the mail today . Your comment helped me choose. I absolutely love it! Its so easy! Lol what have I been doing all of my life? Thank you for responding.

[@jenniferg6818]

Totally agree about the mop head. Bought a Bissell powerforce. Problem solved. Great content. Subbed.

[@superdadxpress5048]

So just to confirm. For commercial use which one is better overall for jobs that consist of both residential and commercial? Home cleaning I think would be easy for both but the commercial side I come to find hardened messes that need a good scrubbing/clean and I don't want to eat up time to get it done

[@Cliff1029]

I was all set in buying the McCulloch MC1375 Canister Steam System until I watched this, to factors that have me looking the Neat is a higher steam temp and produces less water when you are using it.

[@CleanFreakGermaphobe]

I prefer the Neat but it's interesting how is pretty split, judging from the comments. I used to take a stronger stand until I realized that it depends on your priorities and how you plan to use it.

[@Cliff1029]

so true, I'm more into car detailing so still on the fence Lol.

[@AnonyMous-rr1rv]

Replacement brushes cost way too much. Kinda like printer ink

[@lisagrace6471]

@@AnonyMous-rr1rv replacement brushes on both?

[@hildagerrits2164]

The dupray will fill easier if you lock the hose open while filling so the air can go out. Don't forget to close the hose before heating.

[@CleanFreakGermaphobe]

Interesting, how do you lock the hose?

[@ledenehasenauer2738]

​@@CleanFreakGermaphobe button on top and trigger at same time. Then trigger again to unock.

[@leighsowers5099]

Hold the trigger when you pour water in the dupray to create a vent for easier fill. Same concept as when you punch a hole in a can to pour, etc.

[@CleanFreakGermaphobe]

Great tip, I'm going to do that. Thank you so much!

[@leighsowers5099]

@@CleanFreakGermaphobe or a rubber band or similar if you need both hands to fill 😄

[@CleanFreakGermaphobe]

It has a trigger lock 😀

[@leighsowers5099]

@@CleanFreakGermaphobe mine comes today! I’m excited! But I take the awkward fill without venting the trigger to mean the boiler is nice and sealed!

[@cebasmb8250]

I have the neat used it like over 2 years.....but one thing I did wrong was to leave water inside after used cause corrosion and block the hose........email dupray they walk me through how to clean it but never work. guess it was really bad on the inside. Email the second time told them what happen they told me pack it up send it to them.....I was so happy they sent me a new one I love the steamer works great heat fast....it's a great steamer around the house I used if for car detailing for a year now I got my Chiefsteamer 😍 for car detail it's another level Dupray works great

[@CleanFreakGermaphobe]

They stand behind their product. Thanks for sharing your story and now I'm never leaving any water inside a steam cleaner again. I stopped after I made this video.

[@cebasmb8250]

@@CleanFreakGermaphobe yes they do I love mine....and for sure empty it after every used

[@Christina098red]

I have the same problem! I didn't think to email them. Thank you!

[@ms.bonillas1125]

When filling the dupray with water, it's best and faster to squeeze the trigger it helps pull water down into the unit rather than waiting or using your finger to push water down. Trigger is a suction into the base.

[@bgracew1]

The one thing I did not like about the McCulloch is right after my 2 year warranty was up, the hose broke down close to the canister. when I called to see if there is a replacement for it, I was told it can not be replaced or repaired. So, after only 2 years I have a steamer that I can not use, and I don't feel like I got my moneys worth.

[@CleanFreakGermaphobe]

So sorry to hear that! I'd definitely choose the Dupray over the McCullough when it comes to longevity. However, you can't replace the hose on the Neat either. You can on more expensive models, like the Tosca which is built like a tank...

[@marktechsci]

Didn’t read all the comments, but when you have a fill problem like they you can put a small straw or tube down the filler hole which will allow it to equalize the air.

[@jerrywilkerson5358]

I just purchased the Neat steamer. Your video was great very helpful!

[@m77ast]

Your husband must be a happy man. Nothing better than coming home to a Fresh clean home. Getting first steam cleaner - the chemical bleach stuff drives me cr**y :-)

[@RichieValentine]

Literally deciding between these two, thank you!

[@CleanFreakGermaphobe]

What did you decide?

[@RichieValentine]

@@CleanFreakGermaphobe got the latest dupray. Let's you put in more water AS you're cleaning. Less of a wait to heat up the new water

[@CleanFreakGermaphobe]

@RichieValentine oh nice!! We’ve yet to try it but it sounds amazing.

[@jenniferg6818]

Excellent content. Subbed. I bought the neat. Looking forward to doing windows with it.

[@KindnessInChaos]

I've read so many reviews and these 2 brands keep coming up. I think I'll go with the NEAT. I want my shower doors as clean as yours! :)

[@CleanFreakGermaphobe]

The Neat is my top pick! You'll love it!

[@CandycaneBeyond]

I just got the Mccolluck for Christmas. I received a larger unit with large wheels and "suitcase like" handle. more accessories. I had to go to a hardware store and get a tool bag to put them all in.

[@CleanFreakGermaphobe]

How do you like it so far??

[@CandycaneBeyond]

@@CleanFreakGermaphobe haven't had a chance to use yet. Going to make sure I use distilled water.

[@chellmcwags6229]

@@CandycaneBeyondhow have you liked it?

[@trgvtrgv9384]

Continuous steam isn't about locking it on, it's about how long the pressure lasts while steaming continuously.

[@CleanFreakGermaphobe]

What's the right term? Steam lock usually refers to a child safety feature. Anyway, I think people can get the idea that you can lock the steam on so you don't need to hold the button to get steam.

[@jamesjones7868]

@@CleanFreakGermaphobe"trigger lock" is probably a more appropriate term. Multi-use steamers like these usually always have continuous steam. Garment steamers are where the concern for continuous steam is usually placed. My garment steamer pumps steam for about 15-30 seconds before having to build pressure again. I thought it was normal until I learned it wasn't 🤦🏿‍♂️

[@ILruffian]

This is correct. Continuous fill is a technical term referring to the ability of the boiler--once heated--to put out steam continuously.

[@dko8546]

Thanks for the great review. Very helpful.

[@CleanFreakGermaphobe]

And thank you for your kind comment and for watching!

[@BlueSky78683]

The neat is pretty the other brands are not nice to look at! That's 1 of the main reasons I went with the Dupray you want pretty cleaning; aesthetically pleasing cleaning supplies lol. That and i felt the handle is easier to maneuver with cleaning an oven etc

[@classicalgas8297]

I saw on another channel, when you fill the Dupray, if you click the nozzle button open when you fill it, the water goes in much easier. But make sure you release it before you start to heat.

[@tribulationprepper787]

I saw that video as well. Makes perfect sense.

[@matt6582420]

You may have found by now but if you press the trigger while filling the Dupray neat it will go faster and you won’t need to use your finger

[@rickl571]

Actually the mccullough’s steam is not constant or spurs out along with with a lot of water, in every single video I saw on the McCullough water just never seems to stop coming out in one I even saw steam coming out of there gauge vs the other that it kind of stays as constant, also there’s a lot of reviews on the McCullough claiming that it loses heat and it just shoots cool water, and last nothing actually has the exact psi that is being claimed and this is all compressor style equipment so saying 58psi I wouldn’t swear by it. Ok that’s my 2 cents in

[@MG-ww9rf]

💁🏽‍♀️ I just ordered my Dupray and I can’t thank you enough for this AMAZING review!!! 🤗

[@CleanFreakGermaphobe]

And I can't thank you enough for your comment - you made my day!!

[@ashleynicole3499]

I wish I had seen this before ordering the purclean. I'm going to return it and get the dupray

[@CleanFreakGermaphobe]

Just used my Dupray today and even after filming, couldn't stop.

[@micharris1761]

i think you did a great video, well done.

[@CleanFreakGermaphobe]

Thanks so much, always learning and trying to improve!

[@tgreen200]

Great video. I use the Dupree for my detailing business. I bought it last year in August. Works fantastic. Heat very well fast. Now I feel I got a great buy. 👍

[@faithahora]

how has your Dupree held out now one month later? and did you get the Neat?

[@tgreen200]

@@faithahora Hey it’s holding up strong one year later. I got it in 2020 aug. Works as it did from day 1. One of the best high heat steamers out there.

[@CleanFreakGermaphobe]

Yes, it's the best! We started this channel over 4 years ago and reviewed the Tosca. Then we got the Neat when it came out. This year I learned to empty out the water in the boiler after cleaning. Unless you're going to use it again, don't let it sit. It will prolong the life of your steam cleaner.

[@anthonyrios7183]

If you fill while depressing the nozzle it fills much quicker and easily and it states this in the manual to do so when filling

[@CleanFreakGermaphobe]

Yes you’re correct. I learned that after I did this video. Unfortunately, I can’t go back and add it now.

[@tuwandaneal7069]

I just received my dupray neat. I love it!

[@CleanFreakGermaphobe]

Happy to hear and I feel the same way!

[@dieniewienie143]

The Dupray wins hands down. I've owned two MC's and they're not even close to the performance of the Dupray.

[@jmfia2391]

I had that same Dupray, the steam didn't even reach over 100 degrees.. I tested it on an oil thermometer and on mt bare hands. It blew out hot air but I was able to keep my hand there for a few minutes. It has a great design and it very cute but ineffective. The Mcollua works like a champ, it actually heats up to over 200 degrees. I tested it on my thermometer and hand, it passed. I couldn't keep my hand there through burning it, and my thermometer confirmed that by showing me the 200 degree steam tem.

[@kathytegreene1562]

I have had the Mc Culloch 1385 for years and love it. We have a boat and water drains to the ocean so I don’t like to use cleaners.

[@CinHalCedHerChance]

I wish more people were this aware about using chemicals and our waters. It's insane to think people are so ignorant about this issue which is so important.

[@HazyTom]

Enjoyed it. Would you go with the Neat or one of Dupray higher models. It's confusing to decide, but I want to use indoor (baths, counters, ovens) and outside (car, garage floors).

[@CleanFreakGermaphobe]

For me I prefer the Neat for how much lighter it is and easier to carry. But the Tosca is so much more powerful, holds more water and is solid steel.

[@danguzman4676]

Just got the Harbor Freight model & they compare it to the Dupray. I got the extended 2 year warranty.

[@cardonadarlene4650]

Dan I got the central machinery 1500 is that the one u have in harbor

[@lauramcninchpeebles8768]

Tap water contains minerals which create the scaling you see in the water she is emptying. Distilled water prevents scaling and should be used.

[@jm_barnes60]

After watching the video, I think I would like the McCulloch for the different parts that come with it and the length as well as the fact that I like the look much better. I am not so concerned about the warranty, the McCulloch just has more that I want.

[@CleanFreakGermaphobe]

We think they're both great steam cleaners and glad our video helped you find the one that's best for you!

[@tribulationprepper787]

JMB, I'm with you! The McCulloch is a far better looking piece of equipment AND it matches all of my yellow and black DeWalt power tools to boot. Who could ask for more!!!

[@brendatrigos3331]

Thank you so much!!! Best video on this ever!!!❤️✅💎

[@CleanFreakGermaphobe]

Thank you, happy you liked it!

[@CinHalCedHerChance]

I just saw a review where the guy seemed to be honest about his Dupray purchase and he wasn't impressed with it's (lack of) cleaning strength. So confused as to whether I should get one or not.

[@chellmcwags6229]

Did you end up getting one?

[@CinHalCedHerChance]

@@chellmcwags6229 No. But it's still on my radar.

[@chellmcwags6229]

It’s hard trying to choose! Lol

[@CinHalCedHerChance]

@@chellmcwags6229 It really is. I'd lean towards Dupray because it's not made in China - that alone is great.

[@ambercrombie789]

I'm guessing that distilled water is the only way to go. ? // Or clean tank with white vinegar regularly. ?

[@CleanFreakGermaphobe]

Actually you can use tap water but just dump out any remaining after you clean. Then you can descale with vinegar if needed.

[@tmf7563]

Thanks for this review. Was split between the two models. Trying to clear up dust mites cuz my dog is scratching like crazy. Hopefully the dupray helps.

[@icantdance6813]

A uv bulb might be faster for that.

[@tmf7563]

@@icantdance6813 have you used one for that specific purpose?

[@saltcitybabe]

Don't use it on the dog.

[@tribulationprepper787]

@@icantdance6813 An ozone generator would be faster yet. It kills every living thing in the house by temporarily replacing oxygen with ozone and it does it all at once for around a $100 investment. It gets rid of cigarette smell as well. (If you are a smoker)

[@thegiftlady1]

You mentioned some of the accessories are interchangeable. Tell me more! I like the same tool that you do.

[@CleanFreakGermaphobe]

The brushes are and the lance tool that the brushes attach to. They’re the same between the Dupray Tosca and the Dupray Neat and other Dupray models ( you’d need to check with them on which consumer models).

[@denisenunya7054]

I just got my NEAT today, I haven’t used it yet and am new to steaming so I found this video while looking up what all I can do with the different attachments and how to use it...thank you! This video really helped.

[@CleanFreakGermaphobe]

You'll love it, thank you for taking the time to leave such a nice comment.

[@annachristine2]

Lock your trigger open and water will pour right in/be sure to unlock before heating

[@CleanFreakGermaphobe]

I'm going to try that, thanks for the tip!

[@Captain_Spaulding]

How does steam do on stainless steel appliances? I figured the steam would cause rust over time.

[@jaymebisi2946]

Love your videos 🤩 I’m a house keeper so this is amazing! Do you have any more affordable steamers you would suggest?

[@CleanFreakGermaphobe]

Thank you, I really appreciate your comment and support. You could buy a handheld steam cleaner like this one amzn.to/3meKa4U (aff link) but you will need to refill it more often. However, it's only about $50.

[@piperlynn9060]

Just purchased McCulloch MC1385

[@aprildrosjack6521]

I'd choose the Duoray also but you mentioned that the Duoray also has one with steel boiler not copper or aluminum, is steel the best and is what is that model, does it clean well also and how much more does it cost????

[@CleanFreakGermaphobe]

The Dupray Tosca and it’s quite heavy duty but still elegant. Probably overkill for most homeowners. However, I expect it to last for decades. But the price tag is steep, our link below will give you the current price minus 5% but I paid about $1k for it! Which is the most I’ve paid for any cleaning item. However we compared it to one that was more than double so at the time it seemed a lot more reasonable. They didn’t have the Neat then.

[@zfilmmaker]

Based on reviews over the years, the McCullough has hose issues that separate from the machine and can’t be replaced.

[@milesfamilybiz]

I think I will go with the Mcculloch because of the versatility. It moves better, it carries easier and the hose and cord is longer.

[@aminman15]

I have a Neat, it's very versatile. Used it a lot. The compact symmetrical design is rather efficient -- and the handle is perfectly placed.

[@ljguy300]

The neat gets hotter

[@MarielasSister]

I debated between the two as well. The only reasons I chose the Neat is because you can use any rags with it and it advertises that you can use tap water. Those were my two deciding factors but I really struggled to make a decision.

[@trishherrmann390]

@@MarielasSister are you happy with your choice?

[@MarielasSister]

@@trishherrmann390 I am happy with my decision. To be honest I don't use it as often as I thought I would. I don't think the machine is at fault though. I think it's my lack of motivation. I am glad I own it. It saved me when I had to defrost refrigerator.

[@yiannis550]

I would go for the McCulloch. For light jobs maybe the Neat is better but if you want to do the whole house then McCulloch will be better

[@CleanFreakGermaphobe]

Both are great for the job, IMO the Neat is higher quality but as the video says, it depends on what you’re going to use it for. If you are using it to steam mop, the McCullouch is better. I like how compact the Neat is. Your can’t really go wrong with either one.

[@metatechnologist]

You're a wonderful person. Thank you.

[@richardowens9061]

Thanks, for the review! I appreciate how thorough and detailed you were! But, I would make an observation: The surfaces you were cleaning were, essentially, already clean. So, the machines made very little difference - at least, from the perspective of a KZbin viewer who was not present during the cleaning. More useful would have been cleaning items that were extremely filthy. Cleaning one side with one unit and the other side with the other unit. Still, a very useful review! Thanks, again!

[@j-nianomusagmagic8851]

Great vid! Can I add vinegar to water tank on Dupray HOME (not Neat) for EXTRA disinfecting of my surfaces??? Thank you!!

[@Truthbetold718]

So I’m your opinion out of the the Dupray Neat and the Dupray Home which is the better steamer

[@CleanFreakGermaphobe]

I much prefer the Neat. The attachments go on easier and it's better quality to me. However, we should do a comparison to be sure.I just got the Home a few months ago and I use the Neat more so that would be a good challenge. If you have the budget and want a tank of a steam cleaner, the Tosca is amazing (but heavier). It's so well built I think it'll last a lifetime. Gets hotter, holds more water and has more pressure...

[@MrRourke21]

Been using the Mccollluch 1385 which has a 64 ounce water tank. This thing is a beast for its class. Great on shower and regular walls. Great on porous tile in my kitchen and grout lines. Blasted my sinks clean with super long run time. Along with the attachment variety, longer hose and cord the Dupray falls a distant second in comparison.

[@Nomadicah]

How does it do to remove smoke damages walls?

[@AWanderingEye]

Do you find the handle gets hot so would wear some kind of gloves, if so what gloves? I like how you just steam mop the leavings instead of going through a stack of white cloths, thanks!

[@CleanFreakGermaphobe]

I don't ever think the handle gets hot. The hose and the steam cleaner get warm and of course the steam itself. Thanks for watching and commenting. We appreciate it!

[@tkampinelli307]

So which do you think is better for deep cleaning, pressure or steam temp? I saw on the Dupray website that it advertises the steam gets up to 250 degrees but you say 290? Either way that’s still more than the Mcculloch. Just wondering which one actually cleans better.

[@CleanFreakGermaphobe]

This is a great question. And to be honest, most are adequate. I have the $900 Dupray Tosca and only use it for heavy duty cleaning. But it depends on what purpose (sometimes higher pressure or temperature will damage surfaces and both models are adequate). I didn't get any better cleaning on tough grease on an oven from the Tosca than my Neat steam cleaner. But I expect the Tosca to last for decades. And the steam is dryer.

[@tkampinelli307]

@@CleanFreakGermaphobe thank you for the reply. My search for a steam cleaner originated from getting tired of using a regular mop to clean my floors, then later wetting a paper towel to clean something off the floor that spilled, just to find dirt was still coming up on my wet paper towel! So I decided I was done with traditional mopping and wanted to clean my floors with something that would truly work the first time! That being said, the floor mop attachment of the Mcculloch looks fantastic! But I’m hearing so much positive feedback on everything else the Neat does. I wish the Mcculloch’s floor mop came with the Neat! Basically I just want to verify that if I get the Mcculloch I won’t be selling myself short in other cleaning areas outside of the floors. Also, does Dupray sell upgraded floor mop attachments that work with the Neat? Or is the next model up in Dupray noticeably better?

[@lilinurio8348]

Just bought the Dupray, Still had have not opened the box. Too bad that I bought insurance for it. Did not know that there are two years of warranty included and lifetime for the boiler. I still have time to cancel the insurance. Not sure if I should cancel it.

[@CleanFreakGermaphobe]

I’ve had 2 Duprays for years now. I had to get one repaired within the first year. This was several years ago. If you’re using it on a lot of heavy messes or are harder on things then you may want to. But their products are solid and if there’s any issue it should show up in the first 2 years. I really should’ve mentioned the warranty, however we linked to it on Amazon and sometimes the policy is different. Since making this video, we’ve talked directly with them and link to their website.

[@gertymacfarlane6255]

The higher temperature may melt rubber/plastic seals etc.

[@emx9669]

If you don’t mind me asking, have you tried cleaning hanged curtains with either of these?

[@CleanFreakGermaphobe]

I have and it works but is a little awkward. You have to hold the fabric tight while gliding the steamer over it. And you can burn yourself if you’re not careful. But it did the job.

[@mattmclaren496]

Use a drinking straw push it in the hole as you fill the air will come out easy so it won’t block

[@CleanFreakGermaphobe]

Great tip, I’ll try it!

[@BEASTxMODE]

Do you remember what the shipping charge was for the warranty replacement? Thanks. 18:39

[@CleanFreakGermaphobe]

I don't remember them charging me for it. I think I would've remembered if they had because it had to have cost a lot. I'm going to look through my email to see if I can find anything about it. I'm pretty sure I didn't know. Finding a box was the hardest part.

[@BEASTxMODE]

​@@CleanFreakGermaphobe It's ok, no big deal. I just thought it's weird Dupray warranty states they have the right to charge for repair service and shipping fees.

[@DavidMarkley]

when using a steam cleaner are you always using a towel to wipe up the drip and excess water/steam?

[@Tugboat-R-Us]

My Muculloch was awful. My Muculloch worked literally once. Which I only used it for lightly steaming my bed. The second time I tried, it literally wouldn’t hold its heat and then when I pressed the nozzle it literally started spewing hot water everywhere. Literally spent $200 for a POC that I could no longer use.

[@DE-vd8sf]

Nicely done! Thank you for your effort.

[@CleanFreakGermaphobe]

Thanks so much

[@LlamaMama60]

Loved your video on this subject... and because I this I brought the McCulloch machine

[@CleanFreakGermaphobe]

Welcome to steam cleaning - it's the best! There's a bit of a learning curve but it gets things so clean. Let us know what you think after you have some time to clean with it!

[@sjelliott6660]

So these shoot out steam and the surface is cleaned, but what happens to the moisture? Does everything have to be dried afterwards? I'm looking for one to clean my furniture and rugs.

[@CleanFreakGermaphobe]

I would get a carpet cleaner instead, like a Bissell or any on this bestsellers list amzn.to/3kzxndL (sponsored) depending on the size and how heavy duty you need. Steam cleaners work ok but because they use extreme heat, they can melt fabric if you get it too close. You can use a tool with a bonnet over it (like the Dupray triangle tool). But that's more to freshen things and disinfect, get out smells (yes, your furniture will get slightly damp and need to dry). A carpet cleaner is better for large areas and doesn't use heat to clean.

[@sjelliott6660]

@@CleanFreakGermaphobe I bought new rugs! Easier than cleaning. I still need to clean the sofa, though.

[@tribulationprepper787]

I bought the MC 1385, had some problems and so measured the temperature at the nozzle tip which wouldn't exceed 170 degrees F. (212 degrees is steam) Customer service, (Greg) was of no help at all so I returned it as defective to the Amazon seller. Maybe I got a lemon but this steamer would not squirt anything through the jet nozzle or it's attachments.

[@CleanFreakGermaphobe]

That definitely sounds like a lemon. Mine has been great, almost a year later. Sorry you had a bad experience

[@tribulationprepper787]

@@CleanFreakGermaphobe Hey Gal... Last night I ordered a "Neat". It now comes with a window squeegee tool! I will have to insert my meat thermometer into a sponge and squirt the tip of the thermometer to see if the output actually reaches 275 degrees. I'd be happy with 250! Thank you for your videos.

[@CleanFreakGermaphobe]

Thanks but I see people test these all the time. I've cleaned with so many brands. They just have to reach hot enough to go to steam and they clean great. Unless it's a very technical job and you need higher pressure and temperature, plus have the budget, this is more than good enough. I have a Tosca that was $900 and it sits downstairs most of the time because it's so heavy. I only pull it out for big jobs. I'm tempted to sell it. Once your house is clean it's all touching up. Rarely have big jobs unless I'm cleaning other people's home or doing a thorough deep clean.

[@TrueIronhorn]

@@tribulationprepper787 This is a bit of a late reply but did you ever measure the temperature of the steam coming out of the end of the nozzle of your Dupray Neat Steam Cleaner? I'd like to know what the effective temperature is before I buy one.

[@tribulationprepper787]

@@TrueIronhorn You are right. It has been awhile but as I recall, the so called steam was still nothing more than water vapor although closer to 212 degrees. I remember that the vapor loses temperature quickly after leaving the tip of the nozzle but the machine did a fair job of loosening grime. Probably great for washing dishes but not a "magic" tool as advertised. You are probably a couple or more grand away from being able to easily de-grease a car engine.

[@zenon3021]

can you do a Dupray Neat Vs Tosca review? Does more power = less cleaning time?

[@CleanFreakGermaphobe]

I’ve thought of doing one for a while. Maybe it’s time to! I didn’t know if enough people compare them to make it worth it. But longer cleaning time on the Tosca since it holds more water. The Tosca is made of heavy duty steel so the longevity is longer but it’s heavy. You can drain water out the bottom to descale the boiler which helps it last longer. The attachments and mop are much much better on the Tosca (except the brushes are the same). You can clamp on a cloth and the mop head is larger. So I’d say about the same cleaning time just more power with the Tosca. So if you’re cleaning average messes it’s more than you need. If you have bigger jobs it’s nice to not have to wait for it to cool and refill as often. But the Tosca is expensive. I like how lightweight the Neat is and I don’t mop with it. Is much less expensive. Lighter. But it’s likely not going to last a lifetime like I expect my Tosca to. So it depends on your needs and budget. Hope that helps, off the top of my head…

[@north4961]

Nice video and demo! Which machine has the longest duration of steam, how many minutes does the steam last? Thank you!

[@mthoodstyle]

I've heard it only lasts 35-40 minutes for either model on continuous use.

[@norrinradd9206]

How many times can you pull the trigger and be shocked water Flys out?

[@Ddjfhfjfj]

What about Karcher SC5? Choose Karcher,dupray or McCulloch?

[@learn2fly605]

can these be used to clean rugs, if so what would the temp be of the steam hitting the rugs

[@flashattack3114]

Since the Dupray neat doesn’t have a round scrub pad, is there any attachment or suggestion you have to clean ridges in cupboards or stainless steel with the Neat? Will a cloth wrap around one of the small attachments and get the job done? Or should I buy the McCulloch just for those?

[@CleanFreakGermaphobe]

Yes a cloth will work for sure

[@ms6071]

You can buy those scrubbing pads that fit on to a standard drill. Same effect but no scrubbing involved.

[@zibaik4989]

How do you completely empty any left over water? I can always hear some water stuck inside the dupray that just will not empty out

[@CleanFreakGermaphobe]

Remove the cap where you put the water in. Then turn the machine upside down. A little shouldn't be an issue but if it is, you could put the lid back on and keep it on until there's no more steam.

[@DeehH7]

Can these be used to clean a cat tree and a sofa?

[@chrisd4454]

I was firm on the McCullough until I saw the neat which led me here to look for reviews.

[@sherrynoss7135]

Same and just purchased the Neat

[@chrisd4454]

@@sherrynoss7135 I did too!

[@livandcompany]

I am still firm on the McCullough. What made you firm on the Neat? It looks junkier with less options.

[@citizencoy4393]

Happy with your purchase?

[@crystalolson1212]

I have the neat , are the accessories interchangeable? I dont have the scraper that I seen on many and would like it

[@ludovicoriccardonocco5007]

Hi there, great video and new sub. I need to steam clean carpets regularly to control my dust mite allergy. However, I also need to steam my shirts for work but did not want to buy a separate machine for space reasons (I have a very small room). So, do you think I could steam garments using the upholstery nozzles of these machines? This way when I bring out my steam cleaner, I can do my carpets / mattress / and work shirts at once just by switching the accessory and/or the temperature setting. In that case, how would I control the temperature for clothes so I do not ruin them? thank you :)

[@CleanFreakGermaphobe]

Yes you could use the triangle tool to steam clothes. I haven't tried it yet but if you do, let me know how it works for you. I have used a handheld steam cleaner to iron curtains and it worked great. Welcome to C&G, we're so glad to have you here!

[@toneman8478]

Which one is better for furniture and mattress

[@CleanFreakGermaphobe]

Either one. Both have a triangle tool. I would secure a cloth around the end (I use a microfiber cloth secured with a rubber band). That way it won't scratch. You can use the mop for the mattress. For that, the MC has a larger mop head. If you're steaming a king or queen size often (or more than one) it'll go quicker.

[@natlondono3135]

Your link for the discount it is still available? Thanks

[@CleanFreakGermaphobe]

Yes they have us this link that will give you 5% off anything on the Dupray site cleanfreakandgermaphobe.com/neat

[@lallorona3369]

for the Dupray depress the button while you fill it. it says it in the instructions...

[@CleanFreakGermaphobe]

Thank you, I have since learned that! It's right there on the label. My friend bought one because she saw mine, I unboxed it and saw the note right on the Neat to have it on while you refill it. Now I know! So much easier!