BEST VALUE Laser | Ortur Laser Master 3

  Рет қаралды 9,202

YouCanMakeThisToo

YouCanMakeThisToo

Күн бұрын

Пікірлер: 31
@kidvicious2227
@kidvicious2227 Жыл бұрын
Can it be raised up higher
@suncentaur
@suncentaur Жыл бұрын
What is that little Matt you have under the wood?
@SimonHollandfilms
@SimonHollandfilms Жыл бұрын
i see you have a mac.....its ok to run the software needed?
@YouCanMakeThisToo
@YouCanMakeThisToo Жыл бұрын
I run all my lasers on Lightburn, it works well on Mac. You have to buy it, but it's a one time purchase
@hassanal-mosawi4235
@hassanal-mosawi4235 2 жыл бұрын
Thanks for sharing that! good for you on the new skills!
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
Thanks! Always fun playing with new stuff
@rcm9762
@rcm9762 Жыл бұрын
Does the OLM3 LE 20 Watt have foldable feet. I don't see them in the photo like I do on the 10 Watt
@YouCanMakeThisToo
@YouCanMakeThisToo Жыл бұрын
Might be an extra option, I'd check the sales page
@MCsCreations
@MCsCreations 2 жыл бұрын
Really beautiful work, Caleb! 😃 Great machine indeed! Seems like a great option! Stay safe there with your family! 🖖😊
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
Thanks! You too!
@youmbgtube
@youmbgtube Жыл бұрын
Nice review. I’m between this and Sainsmart LC-50 Plus. Ortur advertises 12mm wood cut in one pass and 10mm acrylic in one pass. Sainsmart is I think 10 and 5 but the wattage is the same. The LC-50 has 4” wider work area, includes air pump, and wire management looks better. Ortur seems to have bigger following and has WiFi. LC-50 has linear bearings and Ortur has wheels. I’m new so any help in my buying decision appreciated.
@YouCanMakeThisToo
@YouCanMakeThisToo Жыл бұрын
Xtool also has a 40w option now. Based on what the 20w did.. that 40w is wild. Following doesn’t just mean brand recognition, but generally better support. Lasers don’t have resistance so I don’t think you’re gaining much with linear rails instead of belt.
@j_b_9381
@j_b_9381 2 жыл бұрын
I just watched your other video on the xTool laser. The 10w xTool is roughly $100 cheaper than the Ortur 10w. In your opinion, which is the better value of the 2?
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
On Amazon right now there’s only a $10 difference with the current sales. I’d go Ortur though because it’s an easier assembly, the air assist loses less pressure going to the head, and there was less glitches running it with lightburn.
@j_b_9381
@j_b_9381 2 жыл бұрын
@@YouCanMakeThisToo Thanks!
@bneil4059
@bneil4059 2 жыл бұрын
@@j_b_9381 Ortur has announced the Laser Master 3 LE, pre-sale is open December 16th, 2022
@neilphillips3193
@neilphillips3193 2 жыл бұрын
I heard it from NEJE direct that you can run a diode laser at 100% with no real decrease in life. That’s a throwback from older diode tech with bad cooling and also CO2 lasers
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
Ah that makes sense. I’ve spent a lot more time with co2 and just assumed. Thanks for clarifying!
@neilphillips3193
@neilphillips3193 2 жыл бұрын
@@YouCanMakeThisToo no worries. I still see it a lot on forums etc, but this info came straight from the manufacturer while we were troubleshooting a recent module failure. Love your channel by the way, great stuff 👍
@frankswd
@frankswd 2 жыл бұрын
will you share the file of the decoration ?
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
It’s not mine or I would. Bought a pack of ornament files from Etsy
@edhiestand1197
@edhiestand1197 2 жыл бұрын
Is this something that I could use to engrave photos on wood?
@mariushegli
@mariushegli 2 жыл бұрын
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
Thanks!
@DartanyanKane
@DartanyanKane Жыл бұрын
W
@rl-bo5gf
@rl-bo5gf 2 жыл бұрын
How do I center the laser when I'm engraving designs on my chest? I am able to balance it with my nipples as they are always rock hard. Just trying to figure out how to z drop it without the laser getting into my belly button please help
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
Just make sure you're wearing the safety glasses
@jayeckhart1561
@jayeckhart1561 2 жыл бұрын
Just get a tattoo, it will hurt less.
@moonshinerunner01
@moonshinerunner01 Жыл бұрын
I bought an ORTUR Master 3 LE in January, and it still does not work. I have sent loads of emails, videos, and photos, so they sent me a secondhand laser, which does not work either. Today 31/05/2023 and I have been ripped off by ORTUR.
@goonermark8565
@goonermark8565 2 жыл бұрын
Neje 3max is bigger and cheaper. much better value.
@YouCanMakeThisToo
@YouCanMakeThisToo 2 жыл бұрын
There's a ton available right now, haven't used the Neje
NEW Ortur Laser Master 3 | Let's Test It!!
16:46
Monkey Woodworks and More
Рет қаралды 29 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
xTool D1 Pro and Ortur Laser Master 3 Comparison (Updated)
20:44
Buster Beagle 3D®
Рет қаралды 25 М.
Is this the new KING of AI depth maps for laser?
16:28
Justin Laser
Рет қаралды 65 М.
Ortur 20W Laser Master 3 Laser Engraver Review
15:16
James Biggar
Рет қаралды 23 М.
Ortur LM3 Laser to cut Inlays
10:34
Mark Gutierrez
Рет қаралды 16 М.
Ortur Laser Master 3 Detailed Assembly PLUS Initial Testing
23:05
Engraving METAL with the Ortur Laser Master!
17:16
Nate From the Internet
Рет қаралды 109 М.
ORTUR'S BEST YET! - Ortur Laser Master 3 Review
11:44
Make or Break Shop
Рет қаралды 27 М.
How to Make Money Making Wall Art with a Cheap Desktop Laser
18:06
The Edge of Tech
Рет қаралды 456 М.