BEST VIDEO on How to Make/Crimp RJ45 Ethernet Cable without a Crimping Tool using screwdriver

How to crimp RJ-45 Connector plug onto Ethernet cable without crimping tool using screwdriver and knife. How to make Ethernet cable. How to crimp Ethernet cable. How to replace RJ45 connector without tools. How cripm RJ45 without crimper. How to attach RJ-45 without tools. Crimp Ethernet without tools. How to Crimp Ethernet cable without a crimping tool.
Monetize your Clicks and Downloads: publisher.linkvertise.com/ac/...
• LINKVERTISE One of the...
You can help me to support my project:
On PATREON: / 2013electronicscomputers
Affiliate links for Tools from Amazon:
High quality Crimping Tool: amzn.to/3stShS8
Cheap crimping tool: amzn.to/47mvaZ7
Punch Down tool: amzn.to/2GgC4rh
Klein Tools VDV427-104 t Punchdown Blade: amzn.to/3eHLbid
Punch Down LSA: amzn.to/3qTqoOL
RJ45 connectors: amzn.to/3Qx5txE
Network tester: amzn.to/3Wah72Y
Ethernet cable: amzn.to/2TGVx7w
Klein Tools VDV500-820 Cable Tracer: amzn.to/3mFbmus
Klein Tools VDV501-853 Cable Tester: amzn.to/342M4zX
Tools from AliExpress:
Cable tracer UNI-T: alii.pub/6tk995
High quality Crimping Tool: ali.pub/300w69
Cheap crimping tool + stripping tool for 5$: alii.pub/6tk92j
Punch Down KRONE LSA+ tool: alii.pub/6tk95n
Punch Down tool: ali.pub/66xzeq
20pcs RJ45 connectors: alii.pub/6tk97l
High quality Ethernet cable: ali.pub/40ls6x

[@P.A.GamingFF]

It Works..............!! Horray😄😄 First i ordered crimping tool for making a Rj4 Connector Once. Then I watched The Comments in this video. Got The confidence & I Did It....

[@ElectronicsComputers]

Glad I could help

[@mijazmukundan7262]

Thank you! I really did not want to buy a crimping tool for one time use!

[@ElectronicsComputers]

Glad I could help!

[@hubristicmystic]

Exactly, this guy is a genius

[@gouster4583]

If you have access to crimping tools for free, do it properly. But this should work as well, just those pins gets imperfections made by screwdriver. Not a big deal, it should still work. Good enought to save money instead of buyng crimping tools for one time use. But

[@patrickmckenzie9919]

Thanks brother you’re awesome

[@UniversalLearnerMPC]

Same here 😁

[@atifsultan_mech]

I was so confused as to how the smaller wires make connections when we dont strip them in the first place. The explanation was simply demonstrated. Excellent video explaining all of queries. Thank you

[@ElectronicsComputers]

I'm glad I could help you!

[@TheAlexn2]

yeah excellent the golden parts how you remove them?? try to lift it up and it doesn't work with a knife.... it's not well explained

[@DeepakSharma-rw6ws]

You son of a gun, I tried and it worked in the first try. My locla broadband operator was charging me 200 bucks just to do crimping and keep in mind I even had the rj45 pin as well so all he had to do is just use that tool. To which I declined and tried to do it myself today. You're awesome man

[@ElectronicsComputers]

I'm glad I could help you! 200$ that's crazy You can buy a new crimper for 15$ and a whole bunch of connectors. The link in the description.

[@YuriPlotnikov]

I appreciate that you showed how the crimper works and how the blades connect to the wires. All the other videos left that information out. But you included it

[@ElectronicsComputers]

I'm happy to help!

[@choomanfoo]

A perfect no nonsense, clearly filmed, to-the-point explanation; thank you!!!

[@ElectronicsComputers]

Glad it was helpful!

[@goluthebunny4572]

can't believe it worked for me. Thanks to you for a half a decade old effort.

[@ElectronicsComputers]

Glad it helped

[@SomethingGamecatAdjacent]

You weren't lying, this is the best video for this. Beware people, there are 2 possible combinations of the wire color order. Look at your wire first to see which you should follow. Thank you!!

[@ElectronicsComputers]

Happy to help!

[@baraa_awwad]

Thank u, almost 6 professional people told me I needed the Clippers and you have just proven all of them wrong

[@ElectronicsComputers]

I'm glad I could help you!

[@dms6117]

Thank you for this! I accidentally severed my Cat6 cable working on a framing project. Took me 2 tries but finally the lights went on! Someone here mentioned using a metal ruler to push the pins down...awesome tip! I also used a stubby flathead screwdriver after pushing them flush with the plastic with the ruler. Using a firm rocking motion with the screwdriver was key in finally pushing the pins down enough to pierce the jacket. Be careful not to crush the plastic bits between the pins, that's how I messed things up the first try.

[@ElectronicsComputers]

I'm glad I could help you!

[@sohandhuri9203]

Thank you, you gave complete information without wasting time. it work👍👍👍👍👍👍

[@ElectronicsComputers]

Glad it helped

[@SH-vi7bp]

Bravo. I like the way you show both use of a crimping tool as well as cheaper alternatives. I don't do this much so the home tool option is what I was looking for; I don't need another expensive tool in my box that will probably become obsolete before I reach for it again.

[@ElectronicsComputers]

I'm glad I could help you!

[@black990ops]

You are a life saver, especially showing such a clear chart of the color order, I fixed my cable and it went great! Thank you

[@ElectronicsComputers]

You're welcome!

[@MrSpaceAngel]

Actually, colour doesn't really matter as long as it matches on the both sides of the cable.

[@gunjanjuyal7693]

Thank you so much! You saved me time and money, plus now I have the personal satisfaction of crimping my RJ-45 myself 🙏🏻😎

[@ElectronicsComputers]

Glad I could help!

[@MERCKXWOOD]

Excellent, very clear! Thanks!!! 😁

[@abdulmalikhakami1720]

I have a ethernet port in the wall that wasn’t working and I found out I had to connect to cable running through the wall to my router but the cable didn’t have a connector 😂😂 I just ordered 100 connectors LOL and I cant wait to try out your method!!!

[@ElectronicsComputers]

I' hope it will work for you.

[@So0oMaSB]

Thanks! That's the best vid about this matter

[@fattymcbucklesc4312]

Thanks for this video.Took me several tries but i got it to work !

[@ElectronicsComputers]

I'm happy to help!

[@ahjhaybriones4301]

Love you men! It works so easy, very well explain. Now, I don't need to plug out and bring the whole wire to the nearest computer shop to repair this broken RJ45. I don't even need to buy crimper. Very easy, the easiest thing to do in trouble shooting!

[@ElectronicsComputers]

I'm glad I could help you!

[@migarananayakkara2240]

Excellent video. Clear and to the point. Thank you!

[@ElectronicsComputers]

Thank YOU! I'm happy to help!

[@ahmar004]

Alhamdulillah! I had success! Thankyou very much!

[@ElectronicsComputers]

You are welcome

[@Gabriel-dj3kf]

This video will help people for years to come hehehe I'll try tomorrow

[@ElectronicsComputers]

I hope it will work out for you.

[@jesushidalgo5661]

Amazing video! Very easy to understand and follow. I really like the comparison between the scissors and the crimper. Thank you so much!

[@ElectronicsComputers]

Thank You for the comment!

[@ankan2088]

Thanks a lot, most videos just go for thr crimping tool without explaining how it works. You went into explaining how the pins pierce the sheathing and how the latch works.

[@ElectronicsComputers]

Glad it helped

[@djabthrash]

Yes

[@cohovotele]

Thank you for the time invested in making this video :) Worked like a charm

[@ElectronicsComputers]

You're welcome! I'm glad I could help you.

[@jonhnybravo2805]

Iv done this a ton of times with the tool but was worried i would break the connecter by pushing it. Thanks man very clear details

[@ElectronicsComputers]

I'm happy to help!

[@madhousenetwork]

Thank you very much. Successfully crimped with no tools and with the first connector

[@ElectronicsComputers]

Glad it helped

[@thomaslee7007]

This is just what I needed. It is very clear and well explained. Thank you!

[@ElectronicsComputers]

I'm glad I could help you!

[@andresfelipe38]

Thank you so much for this video. It saved me. I never thought it was that easy

[@ElectronicsComputers]

I'm so glad I could help You!

[@temporaryid1534]

Quite helpful, indeed. There may arise certain situations, when you can't get a hold of your crimping tool: in those scenarios, this makeshift arrangement saves your day. Also, for those who don't want to buy one for that odd crimp job, this technique may come in handy . I use screwdriver to push in the latch and a steel ruler to push the copper pins into the wire.

[@ElectronicsComputers]

Thanks for the comment!

[@michaellivingston6901]

Perfect video - shows how to do it with pro and home tools side by side, so you can compare and understand yourself. Bravo!

[@ElectronicsComputers]

Glad it helped!

[@TheJeepinDad]

This is SUPER helpful, thank you! Genius!

[@ElectronicsComputers]

Thank You! I'm happy to help!

[@knightsljx]

great explanation of how the connector works, showing the prong of the pins was very helpful in understanding the mechanism. been searching for something like this

[@ElectronicsComputers]

Thank you for the comment! I'm glad I could help you.

[@marktenner]

I just fixed my own lan cable that my dog broke thanks to your video🙏👍🏼😁

[@ElectronicsComputers]

Great job! I'm happy to help.

[@joemelmarshallsantos5292]

Thanks alot it saves me alot of money😍

[@JedStormUnicorn]

Thanks, this was very helpful and you were very clear, worked perfectly!

[@MrAlexander100]

You just saved me from a lot of work cause my 15m ethernet cable (which is double side taped to the wall) was bent badly towards one end and had disconnections. Cut it half a meter before the plug, followed your tutorial and VOILA !!!! It works flawlessly now and i dont need to run a new 15m cable !! Thank you !

[@ElectronicsComputers]

Great job! I'm happy to help!

[@user-io4lp3zp9v]

Great! I made it successfully. One thing to note is the pins must be pushed down so that finally they are below the plastic. If it feels flat, that means the pins didn't be pushed to the end.

[@ElectronicsComputers]

I'm glad I could help you!

[@JedStormUnicorn]

Yep, on my first try it didn't work so I checked if they could be pushed further and they did. Worked after that

[@oddballaklyama4395]

By some miracle, specially to a newbie like me, I managed to pull this off. Thank you so much!

[@ElectronicsComputers]

Great job!

[@sss-im1vl]

Good explanation.wow.tnkx.நன்றி

[@ElectronicsComputers]

I'm happy to help!

[@mrguitar8747]

i see this video late but now i have a crimping tool xD i tried both methods and both are good

[@ElectronicsComputers]

Thank you for the comment!

[@rpaip]

Thank you for sharing this. Very useful. Saved me time and money.

[@ElectronicsComputers]

I'm happy to help!

[@B08T]

Thank you so much for the help, everything you did was perfect the only thing that i found hard was the part were you had to strighten the cables but besides that it was easy!

[@ElectronicsComputers]

Glad it helped!

[@binal5542]

It’s 100% the best video explaining how fix rj45 connector

[@ElectronicsComputers]

Happy to help!

[@hanzelah]

Thank you for making this video.

[@ElectronicsComputers]

Glad it was helpful!

[@rjtech2453]

Thanks bro for this tutorial. I'm really glad I didn't buy the clipping tool just for the sake of 2 connectors and then throwing it away. I'm getting 27mbps speed in my second floor with the wire that I just connected through watching your video. Thanks again mate.

[@ElectronicsComputers]

Glad I could help!

[@marissapanganiban4739]

THANKYOU .. VERY HELPFUL AND INFORMATIVE VIDEO

[@ElectronicsComputers]

You are most welcome

[@GenAdams]

excellent video, thank you. I accidentally cut into my ISP provided long cable, which is coming from outside the house in a locked box. It is working again, thanks!

[@ElectronicsComputers]

I'm glad I could help you!

[@FactFlare370]

thank you sir. youre a life saver. i have my rusty old crimping tool then i cut my cables then when i was about to use the crimping tool, the teeth does not align to the little prongs. thanks for this

[@ElectronicsComputers]

Glad I could help

[@monicatanghal5964]

Love this so much! Took me one try to make it work! I now do all my ethernet cables, thank you so much!

[@ElectronicsComputers]

You're welcome!

[@user-mw7le5yu2d]

this is the best tutorial i ve ever seen thanks 🥰

[@ElectronicsComputers]

Glad it was helpful!

[@EMS916]

This video was a great help in a pinch! Thanks!

[@ElectronicsComputers]

I'm glad I could help you!

[@jawadhassan4242]

wow! excelent explanation with clear shots. I got this done by two shops & they did it wrong , now I can do it without the tools at home

[@ElectronicsComputers]

Thank you for the comment, I'm happy to help!

[@monohydrate2]

I was trying to figure out how RJ45 worked and this visual demonstration makes it clear!

[@ElectronicsComputers]

Happy to help!

[@scottsterling3638]

Thank god for this bro, love it. Now i can go back using the pc with internet now ( hope it works)

[@ElectronicsComputers]

I'm happy to help!

[@argonthesad]

Did it work?

[@rabbarabbat7635]

like this, you make it look easy

[@rehanakhter1975]

Easy learning process to connect cable with RJ45, Thanks

[@ElectronicsComputers]

Glad it helped

[@user-ci7tp5hg6t]

Awesome video, works perfectly and extremely clear

[@ElectronicsComputers]

Thank you for the comment! Glad it helped.

[@tristanhanuman9756]

so helpful and informative and easy to understand, best video by far! Thanks

[@ElectronicsComputers]

Glad it was helpful!

[@lv970705]

clear and short, excellent!

[@ElectronicsComputers]

Thank YOU!

[@MrRight-uv9vb]

Thank You, I just did mine and it worked on the first try

[@ElectronicsComputers]

Great job! I'm happy to help!

[@RogueWallEnthusiast]

Thank you SO MUCH. Love your Accent

[@ElectronicsComputers]

It's impossible :) Anyways happy to help!

[@gratrunka6479]

thanks man, you're a life saver!

[@ElectronicsComputers]

happy to help!

[@margoloor894]

I thought you could only do this with a special tool. Needed to do 4 RJ45 ends in my house, didn't have the tool. Watched your video, tried and it worked! I did brake two plastic ends in the process, but I had some to spare. Much appretiated!

[@ElectronicsComputers]

Glad I could help

[@alrock55]

thank you so much sir it save me pocket money

[@ElectronicsComputers]

You're welcome! I'm glad I could help you.

[@mateialexandru332]

Thank you, it saved my day!

[@ElectronicsComputers]

I'm happy to help!

[@mohdem33]

worked 2nd try thank you!

[@ElectronicsComputers]

You're welcome!

[@dheerajaithal9791]

Bro you saved my day Thank you so much Your explanation and trick was more helpful ❤️❣️❣️

[@ElectronicsComputers]

Most welcome 😊

[@Jared-cl7cd]

Thanks man this is so helpful

[@ElectronicsComputers]

Glad I could help 😌

[@tasleemahmad4081]

Love you brother and appreciate u.wish u best luck in future

[@ElectronicsComputers]

Thank you buddy! I wish you all the best too

[@MrJeffcoley1]

THANK YOU! I will probably make exactly one cable in my life, and I was really not wanting to buy a $40 tool for one use only.

[@ElectronicsComputers]

Just follow the instructions and it will work for you.

[@jesuisravi]

very nice job.

[@muktawat]

Thanks a lot, ur tip WORKED for me, video saved me from a lot of trouble and now I can post this comment using the Internet I got from that fixed lan 😆

[@ElectronicsComputers]

Good job! Glad it helped.

[@XYZ-pn2dm]

Thanks.. was really helpful.

[@ElectronicsComputers]

Glad it helped!

[@santasssssssss2293]

Thank you so much, extremelly helpfull

[@ElectronicsComputers]

Glad it helped!

[@anshasthana5837]

This may be helpful in emergency situations 👍

[@ElectronicsComputers]

Thank you for the comment!

[@JoelAtico]

very nice!!!!!

[@omarwajeed9613]

State of the Art video. Very helpful step by step explanation. Superb!

[@ElectronicsComputers]

Glad it was helpful!

[@Rinor.063]

Thank you man you helped me a lot 😀

[@ElectronicsComputers]

I'm happy to help!

[@powerofmight7]

Thank you! Made it easily without crimpling tool! :)

[@kulemax53video]

Thank you, you made my day!

[@ElectronicsComputers]

You're welcome!

[@ehabbibo79]

Very clear and simple, thanks a lot

[@ElectronicsComputers]

Glad it helped!

[@antomirko1]

Thanks you man...i've to cable a pc and a smart tv at home and even buying a cheap tools for 4 times use costs more than all the other materials to do the job

[@ElectronicsComputers]

Glad I could help

[@makaras]

Amazing - thank you, Sir

[@ElectronicsComputers]

You are very welcome

[@jackkraken3888]

Very important, make sure when crimping the base of the plug that the pvc sleeve is the one being crimped so it acts like a strain relief, otherwise you will be crimping the data wires themselves and it will cause them to fail over time as you plug and unplug the cable.

[@djabthrash]

Good one

[@netusriderus7177]

Thanks man. Good job.

[@ElectronicsComputers]

You're welcome and thank YOU for the comment!

[@bladetres33]

Thank you so much First attempt too

[@ElectronicsComputers]

Happy to help!

[@sexalex]

you have a really cool voice, made this video 10000x more interesting thank u

[@ElectronicsComputers]

Thank you! 😃

[@buyeth2047]

I wasn't able to push in the pins far enough with a flathead. As soon as I bought a crimping tool, everything worked fine.

[@jakemccoy]

Do you even lift, bro?

[@siyabulelamanona1438]

Awesome video. Thanks for all the details

[@ElectronicsComputers]

Happy to help!

[@duster.]

Fantastic, thank you

[@ElectronicsComputers]

Our pleasure!

[@fynnychannel9318]

You are great

[@ElectronicsComputers]

Thank You!

[@jesreypaco-in9642]

Very good tutorial indeed!

[@ElectronicsComputers]

Glad it was helpful!

[@yoonaskt9867]

Very use full.... Thanks 😍

[@ElectronicsComputers]

You're welcome! I'm happy to help!

[@susutonton1522]

Thank you so much,that was easy explanation

[@ElectronicsComputers]

Happy to help!

[@vlezarens6806]

Your so very help full tanks fir this video

[@ElectronicsComputers]

Happy to help

[@jimcar53]

perfect explanation. Thanks very much

[@ElectronicsComputers]

Glad it was helpful!

[@SUNILKUMAR-it5lp]

Good work best

[@ElectronicsComputers]

Thanks

[@jimmyhjt]

Thanks! Worked great.

[@ElectronicsComputers]

You're welcome!

[@ssjharambe2336]

I'm gonna try this! Crimper is expensive for a one time use

[@ElectronicsComputers]

I hope it worked for you!?