BEST WAY TO INSTALL Front Leveling Spacers Dodge Ram lift kit 4x4 4wd UPDATE fastest how to method

[@johnwilliams4326]

I want to let you know a rough country leveling kit. I watched your video so many times finally after a couple weeks worth of rain I've got to install it I want to give you a huge thank you. Because this trick absolutely work at save me a ton of time specially putting this lift kit on my truck by myself. Sad thing is the back was harder than the front. But once again thank you for showing me this trick and absolutely worked, I even bought the coil compression springs like you got.

[@NoNonsenseKnowHow]

Good stuff! Glad it helped out and I really appreciate you dropping a comment with your experience. Thanks

[@StevenCarlson-ik3fn]

Easy Peasy...Followed the process Mr. NoNonsenseKnowHow detailed for adding 1.5" spacers to my all original 1996 and start to finish 2 hours. Thank you!

[@Austin-gt1yq]

This helped me out a lot done it by myself with spring compressors only hard part was the heat went smooth thanks!!

[@NoNonsenseKnowHow]

Glad it helped!

[@John-rf4xp]

This video made was spot on perfect! Thank you brother!

[@NoNonsenseKnowHow]

No problem man! Glad you found it helpful. Thanks

[@NoNonsenseKnowHow]

*SHANKLY SPRING COMPRESSOR: amzn.to/2moN2AF *OTHER SPRING COMPRESSORS: amzn.to/2kuhwRn *2" SPACERS 2500/3500 4WD: amzn.to/2EfWmuv *3" SPACERS 2500/3500 4WD: amzn.to/2F8P3WL *HEAVY DUTY SPRING COMPRESSOR: amzn.to/2D3nj56 *2" SPACERS 2WD : amzn.to/2LROyXi *3" SPACERS 2WD: amzn.to/2OEmtBo Also recommended: *TUBULAR CONTROL ARMS w/BUSHINGS: amzn.to/2GRJPlE *RANCHO LIFT SHOCKS: amzn.to/2V8HAOK *My Other 2nd Gen Ram Videos: bit.ly/2TLhJLQ

[@Snowmonkeypablo]

What about changing the y steering to the Updated T style ,any remarks and what year would you put in a 96 4x4 club cab ??

[@davidanderson3999]

I just use ratchet straps on my coils, double wrap strap tie a knot in strap 2 of them ,easy done is several times, did 2 1/2” for 275,000 miles now 5 1/2” spacer on with over 300,000 miles on, and 40” irocks 3” body lift

[@NoNonsenseKnowHow]

Nice. I've used ratchet straps on coilovers in the past. But it never felt very safe to me. Definitely works though

[@DDog1029]

Wow. Total genius. I’m putting spaces and shocks. That you for the video.

[@NoNonsenseKnowHow]

no prob and thanks!

[@matthewsmith501]

Here’s the secret….if you want to tow with a level kit….you need to put helper springs on the rear. I’ve done it, never failed me.

[@brian_evins365]

Dude thanks soo much helps me soo much

[@KeithBeTatted]

Welllll damnnnnn!!!! 3 inch spacers, here I come !!! Come to think about it, might even make it easier to put a block under the 1st tire to compress the spring a bit before you even apply the spring compressors . Then tighten the shit out of them and then lift up that side to add the spacer. Lol 🤔

[@NoNonsenseKnowHow]

Yeah that wouldn't be a bad idea! So long as you still have enough room to get in there

[@Jenuin]

Hahaha sweet.... an update

[@Jenuin]

Took your advice. My video is long. I placed a link in my videos description. My way of saying thank you. kzbin.info/www/bejne/apbQnmSPfpp4m6M

[@Raggesvenne]

What about the 1,5” leveling kit that rough country have? should be more appropriate

[@thomasspillner6086]

Hello do you still have the lift blocks ?

[@garrittcusack8702]

Thanks for the video I am honestly wanting to do the same thing. Just curious what size tires you running?

[@NoNonsenseKnowHow]

LT 285 70 17 Bridgestone Revo 3

[@NoNonsenseKnowHow]

Not sure if you saw the update video but I actually ended up taking the spacers out

[@NoNonsenseKnowHow]

Much easier way to do it when I remove them

[@NoNonsenseKnowHow]

Oh wait nevermind I got mixed up. Yes this is the video that I removed them

[@garrittcusack8702]

@@NoNonsenseKnowHow Yeah ha. Cool i'm running 285/75 R16. Really like the way your truck looks. Bought it with the leveling kit and feels little to big for me. Sags like crazy with the cab over on too

[@hunterstaton2509]

Quick question I’m installing a 3 inch level kit on my 98 ram 2500 and for the life of me I can’t manage to put the ball joint from the upper control arm back into the steering knuckle any idea as to how I’d fix this

[@NoNonsenseKnowHow]

It's hard to give you any advice without actually seeing it to be honest. But why is the ball joint out to begin with? Shouldn't need to do anything with the ball joints for a leveling kit. I'm sure that doesn't help but I'm just curious

[@hunterstaton2509]

So from a video I watched he took off the sway bar and took the two ball joints off from the steering knuckle I can link you the video so you can see how I did it

[@NoNonsenseKnowHow]

@@hunterstaton2509 sure. Paste a link. I'm falling asleep here but I'll take a look if I'm still up. Are you sure it's a Ram 2500 with a front straight axle? Or does it have CV axles and upper and lower control arms. Because that's a completely different story

[@hunterstaton2509]

It has cv axles

[@hunterstaton2509]

They are independent of eachother in the front the rear is a straight axle

[@genecenora7176]

Hello if you still have the spacers I could sure use them, thanks from Pittsburgh pa. Gene

[@NoNonsenseKnowHow]

Sorry no somebody claimed them a while back

[@BentleyAnderson122]

Are the lift kit still available

[@NoNonsenseKnowHow]

Sorry someone snagged it

[@bluemen8807]

Holy shit. That is so much easier

[@NoNonsenseKnowHow]

Right! Don't know why I didn't think of doing it this way to begin with

[@mooutdoorstv8594]

When you put the leveling kit in or take out did you get it re aligned?

[@NoNonsenseKnowHow]

Yes. I work at a shop so I put it on the rack. Alignment really didn't change much

[@mooutdoorstv8594]

@@NoNonsenseKnowHow alrighty I’m gonna do it this way and hopefully it won’t change much

[@maclovesgirls1]

I’ll take em

[@NoNonsenseKnowHow]

Unfortunately another subscriber already grabbed them

[@erinmanning425]

Is it stil available

[@NoNonsenseKnowHow]

Nah

[@jordanadamowicz8513]

good video though 👌

[@NoNonsenseKnowHow]

Glad you enjoyed. thanks!

[@juancoy5323]

You still have spacers

[@NoNonsenseKnowHow]

Nah

[@tahotoy]

Compress the shock... with what, your hand? I think I'll take a few minutes to free the bushings.

[@NoNonsenseKnowHow]

The shock compresses with ease by hand pressure

[@wjautoworks3238]

Interesting

[@NoNonsenseKnowHow]

how so?

[@NoNonsenseKnowHow]

I did another video on this a while back. I figured there had to be an easier way, this was the method I came up with.

[@jordanadamowicz8513]

wait. it took you 40 mins to take off a tire?

[@NoNonsenseKnowHow]

No

[@edgarmedina5338]

Better late than never...you still have them?

[@NoNonsenseKnowHow]

nah, someone got them

[@odiarroyo6144]

You don't have to put a spacer in the shocks???

[@NoNonsenseKnowHow]

No. They do sell shocks with longer travel though

[@blackarmforces4230]

ill take them if you still have the spacers.

[@NoNonsenseKnowHow]

Winner winner chicken dinner! :) You got em man! Shoot me an email with your address and I'll send them to you. My email should be in the about section on my channel page.

[@NoNonsenseKnowHow]

You're welcome to post your address here if you would like, but I guess not such a good idea since it's a public forum. Haven't got an email from you yet just FYI

[@mustang8258]

Springs fuckin scare me

[@garciacuster1627]

Made in China...LOL