Epson Eco Tank Printer OWNERS! - You Need To Know This - Avoid CLOGS - Maintenance Box Replacement

[@BestPrinters]

⬇ Maintenance Boxes Below ⬇ ➡ Epson Maintenance Box T04D1 Epson EcoTank ET-15000 ET-3750 ET-3760 WF-2860 ET-4760 ET-3850 ET-4850 XP-5100 ET-3710 ET-5150 ET-3830 ET-2700 👉 geni.us/Z9yi ➡ Epson Maintenance Box/Ink Pad L3110 Epson EcoTank ET-2800 ET-2720 ET-2803 ET-2711 ET-4700 👉 geni.us/ezqCcy ➡ Epson Maintenance Box ET-16650 ET-16600 ET-8550 ET-5850 ET-5880 ET-8500 WF-7820 WF-7310 ET-5800 👉 geni.us/zY8uv

[@Lorna955]

So... it's not as easy as just changing the maintenance box is it? I've changed mine, but still have the message saying my ink pad has reached the end of it's life. Now I find out l need a programme that needs a reset key. Yet another extra cost. Where do l get one for UK & the programme to reset it on for windows?

[@michelleurso4528]

,thanks for the video. Ordered my kit.. hope to be up and running quickly!!

[@NigelShepherd-z7k]

​​​​​@@Lorna955That's right because nobody tells you that these printers count the pages printed. Its not really anything to do with the amount of ink in the sponge If it were, the printer would work once the sponge is changed, cleaned or the whole maintenance box replaced. So they advertise these ink tank printers with enough ink to last 3 years... but that's not true if you have to pay for a new maintenance box in roughly six months.... or less, is it? Canon does the same thing with the Maxify models but you can't even reach the sponges because they are internal. So all of a sudden this isn't looking quite as revolutionary for ink printers as it seemed at first. Ink cartridges are fiddly but can be refilled quite simply. 🤔 Just another way to make money 🤨🇬🇧

[@LuisTren7]

Do you have info for and replacement boxes for ET- 1170 series eco printer?

[@gbleasdell]

Thanks, I just checked my printer, and although the maintenance check showed it about 1/3 full, I removed it, and it was full to overflowing. I have had a spare for quite a while now, so put it right in. I am hoping I caught it in time. The printer has never had any bad printing so had no concerns until I watched your video.

[@BestPrinters]

Good, yes I think sometimes the system can lag and the maintenance box is in fact full.

[@richardterrell5309]

You really did make the point in just a few words, there was little else useful, except a point I will remember that how ink heads can become clogged by head being unable to dispose of it’s surplus.

[@BestPrinters]

Thank you!

[@nshearer46]

Thank you for posting this. How do I reset the counter for the maitenece box or the ink pad. on the 2800

[@BestPrinters]

Here is the software tutorial, kzbin.info/www/bejne/fYCse5porKyandk

[@jerrymercer7683]

You mentioned nothing about having to reset the counter. Dont make people waste their money unless your going to fully educate them on how to save their printer. Im assuming that your getting a kick back off of the waste tanks.

[@BestPrinters]

Good point, I will talk about that aspect of it in an upcoming video. Your feedback is appreciated.

[@VibeZilly]

Well here I go! My box is coming tomorrow and for the ants in my pants I opened it up after I ordered to see how it looks like!😅 I really love the fact I might have just saved myself from buying a new printer bc option #2 going out of state to get it serviced was not it! Thanks Printer Guy! I was not going down without a fight - Homeschool Mamabear

[@BestPrinters]

Good for you, I am glad I was able to help. I salute your Homeschooling efforts!

[@VibeZilly]

@@BestPrintersappreciate that! So I’m back because I need to get rid of the E-11 error and somewhere someone said a laptop can be used (I don’t owe a PC) do you know which laptop can be used? Appreciate your help if you can🙏

[@berniecollier]

Thank you for posting this. I’m m hoping that is what is happening with my Epson printer I’m print white pages with a black faded out pictures

[@BestPrinters]

You may also need to do a cleaning. There's three levels of cleaning one is printhead cleaning. It's a standard one next to a power cleaning belt one is major and uses a lot of ink and finally there is cleaning which is a manual DIY process you need to use the best printers, clean kit for that.

[@alanjessop2924]

great video i have the epson et 2710 i have not used the printer much and it has been left sat in the bedroom next two my tower and not switched on , i have tried to use it again and only the black will print not the colours how can i fix this problem please many thanks Alan

[@BestPrinters]

You may need to do a manual printhead cleaning with a kit.

[@alanjessop2924]

@@BestPrinters thank you for your reply, i can not seem to get the pictures of the ink tanks on my pc or any info showing pluss i am not very good with pc many thanks

[@jonatorresdamaso4009]

@@BestPrinters how to do a manual print head?

[@hdwood76fxe]

Dude, Thanks for the info but man…the OCD! I guess you were trying to drive the info home! I’ll check out your links below. 👍😊🙏

[@BestPrinters]

Glad I could help! 👍

[@NayatiIkyazil]

Hi how about ecotank et-1810?

[@BestPrinters]

Same thing.

[@dennisli9000]

Hi, Which is for the Epson ET-4750? Thanks

[@peterwein1716]

Can the maintenance boxes be cleaned instead of replacing them?

[@BestPrinters]

Unfortunately no.

[@annetteswanson8461]

I’m getting ink splatters on my page. Do you think a new box would help that?

[@BestPrinters]

Yes and also a cleaning with the bp cleaning kit. Please browse my channel for your printer model.

[@williamwhitney6473]

It’s simple to bypass the box entirely and externally collect the ink; but it won’t stop Epson from bricking the printer after so-many cleanings. With my printer (ET-4550), Epson tells customers the printer has reached its end of life and must be replaced. I understand you can buy reset codes, but not from Epson. You should be able to reset it without the game-playing.

[@CharlieD954]

I agree, had to pay $9.99 to unlock my printer.. NOT COOL EPSON

[@BestPrinters]

I am looking into a potetially free option. Please subscribe for updates.

[@armandocortez2291]

Dude great video, I have a 4760 eco tank, and I see the maintenance box like at 60% but I always wonder what that was. After watching your video I’m fully aware of replacing that when time due. Thank you so much.

[@BestPrinters]

You're very welcome! Glad I was able to help!

[@yeshuahtruthlightlifelove5900]

Excellent info but i cant find my model ET 1810 ?

[@lonewolf5316]

i t would be awsome if there was a video on what eco tanks reset themselves automaticly once the maintance box is replaced. from my understanding not all of the ones with the chips do and they have to goto a service center wich isn't cheap!!! i know my 3760 resets itself once the maintance box is replaced

[@BestPrinters]

For priority responses please sign up to our membership 👉 geni.us/BPChannelMember

[@hulbdoggmusic]

If the brother laser printers ever become garbage I don't think there will be a good printer left for the home market that's economical.

[@BestPrinters]

True.

[@northernontarioalgomaeastc8679]

Below you commented to a User that et-2850 was the "white one" same as Et-2800. This is incorrect, 2850 has a hard case around it and product number for replacement is C9-344 and can be bought on the Epson CA or USA sites for about 10 dollars. I know because I spent a significant amount of time to figure out the 2850 maintenance box replacement type.

[@BestPrinters]

Thank you for this info! I will make the changes on this video.

[@eileennunez5175]

Found it, but my prints are printing blurry do you think my printer is damaged or clogged?

[@foolishwatcher]

I have the ET-2500, which is probably the first model. There is no opening, door or removable panel for a maintenance box. The ink pads are probably buried deep inside the printer. Do you have a solution for that model?

[@foolishwatcher]

Never mind, I found a video that explains how to remove the ink pad reservoir and wash out or replace the pads.

[@BestPrinters]

Hi unfortunantely the maintenance box is not accessable on this model.

[@Pallashoernchen777]

Is an EcoTank a good option if you're only printing every few weeks? I'd just go for a laser printer but I need colour printing. My old Epson printer XP-2155 clogs up after every use.

[@letrunghai3612]

No. I use epson ecotank almost everyday but it still clog. They make it clog easily because after clean the head some amount of time, they will block your printer and they will charge money to unlock it. A new kind of scam

[@hulbdoggmusic]

@@letrunghai3612 Yeah I just had a customer with one of these...we ended up running the regular print head cleaning like 3 times and it's working again...for now...but her husband that had passed away had a brother laser printer from just a few years ago sitting in the spare bedroom...so we got that rolling again and it works perfectly. I told her use the epson until it quits which will probably be soon then switch to the brother and never go back lol. Pretty much every ink jet printer today is a pile of junk.

[@msmarthagalan2590]

Got my new et-8550 but I read the instructions wrong and did the initial charge for the ink tanks without the inks in them and added the ink after. What do I do, how do I charge the inks now? I did reset the ink tank levels to full afterwards but it did not resolve my issue.

[@shaunebartoo]

So I have an hp and tired of paying for instant ink and was considering eco tank. My hp has never needed this kind of maintenance so I’m not sure it’s a good option.

[@Thomas63r2]

I had an HP Office Jet Pro that was amazing and I finally wore it out. It cost a mint to keep quality ink cartridges - so I went with an eco tank. It is no where near the print quality and the maintenance is a hassle. Eco tank is not worth the savings in my experience.

[@NigelShepherd-z7k]

​@@Thomas63r2Agreed, me too the Office Jet Pro 8620e. Brilliant machine to this day but I honestly think they are built to fail. I have bought a number of second hand ones since but none of them worked and the sellers knew that, claiming that they did. All seem to have the same print head problems and I've spent a fortune buying new print heads, or cleaning and dismantling used ones.. only for every subsequent printer to work briefly and then stop also🙄

[@eileennunez5175]

Hi, which one is for ET-2720?

[@karenb7975]

I have same printer and it’s my understanding that the maintenance box can’t be replaced on this model.

[@adamalvarez4528]

Which one would work on the et8550

[@BestPrinters]

This one: amzn.to/3MEWg4C

[@adamalvarez4528]

@@BestPrinters thank you

[@BestPrinters]

Sure thing!

[@cjhannah248]

ive changed out the ink pad maint, box on printer but it doesnt recognized that i didstill says ink pand needs replaced i ned help

[@kleinsha]

This sounds like my issue, but I am not seeing one for ET-2850?

[@Lorna955]

It's the 2800 series, they are the same . It's the white ink pad.

[@BestPrinters]

Yes correct.

[@jakeroadtonowhere4070]

ET-2870 can’t see one for mine

[@GraceSmullen-f6n]

my cables unpluged when the lid came off and I can not plug in the larger cable how do I do that epson ET2803

[@BestPrinters]

I am making a video now.

[@BestPrinters]

Please use this link to see instructions on how to replace: drive.google.com/file/d/1z993uZLph6gcWj5QBMZxBv0m_ZS2f-dv/view?usp=sharing

[@BestPrinters]

This version is better: drive.google.com/file/d/11HkEeqlKe4nQMA_GXxvVq1bx4gSqrv0J/view?usp=sharing

[@GraceSmullen-f6n]

I have located the cables and I can replace the small cable but I can’t get the larger cable connected

[@therisnospoon1]

Hi my 4850 says change mainteneance tank but checking the tank on maintenance it is only half full ? how do i reset the volume on the printer please? Your xideo has been very helpful. regards P

[@BestPrinters]

Hi, you need a reset code. I made a video about this recently. Please check my channel page.

[@nunosilveira2149]

Do you know which ones the ET-2870 uses? I find nothing about it online.

[@airam20223]

I haven't been able to find anything online myself. I'm also curious about what changes have been made to the ET-2870. Has the printer been modified in a way that makes it impossible to service it yourself? Dear @BestPrinters comments?

[@Conteslegendesautremonde]

Thanks so much !!!

[@BestPrinters]

You're welcome!

[@StavroMueller]

ET-15000 here, it is now locked out until the T04D1 is replaced.

[@BestPrinters]

Use the link in the description box and get a new one.

[@GaryBeltz]

Doesn't the printer have a monitor that tells you when to change the maintenance box/ink pad? My ET3760 has 4 ink gauges and a maintenance box service life one. From my understanding, once that empties, it won't let you use the printer.

[@BestPrinters]

You bring up a good point. The only issue is that unfortunately that monitor is far behind when it comes to detecting the tank being full. In my experience, a printhead issue occurs well before that monitor, error, code comes up, changing your maintenance box before that message pops up on the screen is essential to making sure your printhead does not get clogged.

[@populistprogressivenewswit4301]

That is correct, and I would not put some third-party item in your printer

[@jerrymarshall2728]

Brandon, I've been 'binge-watching' your past videos concerning the Epson eco tank printers. I have an Et-3760 that my late Wife bought in 2021. When she passed in December 2021, the printer never got used again. Until now. As you might imagine, the printer system is quite clogged. We've been trying to run test pages, but not clear yet. I purchased your best cleaning system, and as soon as it arrives, I'll be pulling ink out of the tanks, through the hoses, then I'll perform the nozzle cleaning, fill the tanks with fresh inks, and perform the power cleaning. I believe this should revive this printer? 🤞 I didn't want to buy a new printer, since I believe we'll be able to salvage this one, and I've moved overseas (Philippines), and electronics can be quite costly! I'm also using a 220v-110v step-down transformer to power the printer, since I believe it only has 110v capability, unlike a good portion of my computers and chargers, which will operate on both voltages. If I'm on the right track for my ET-3760, I would appreciate the feedback, or advice. Thank you

[@BestPrinters]

Hi Jerry, yes you are on the right track. If you have any questions along the way feel free to reach out via Amazon. This is the best way to reach me. I am the third party seller on the best printers kit.

[@jerrymarshall2728]

@@BestPrinters Thank you. It will take time and patience to get this back in good operation. But I'm retired, I have a lot of time 🤣😂

[@nobeam]

DO NOT BUY the Et 2875 300 dollar repair when the ink pad is full! Head is constantly making Lines on the prints so we did head cleaning a lot. Not supporter by any wic reset softwares. ONLY Get a printer that is supported by the wic reset softwares. These printers are very good on ink price but that is where the fun stops..

[@BestPrinters]

Good point.

[@irose1171]

Hi, what maintenance box works for ecotank 2850? Does it need to be chipped to reset the counter?

[@BestPrinters]

For priority responses please sign up to our membership 👉 geni.us/BPChannelMember

[@IzludeTingel]

used a chip resetter and also removed the cotton pads and replaced it with clumping cat litter. scoop as needed. those cotton pads are bad news.

[@BestPrinters]

Wow that is a resourceful option, thanks for sharing.

[@growitwemowitllc1752]

This printer is horrible! Do not get this printer

[@Fudgieguys]

GERT THE THE DAMN POINT!!!!!!!!

[@BestPrinters]

The video is 6 minutes long... just watch and be patient. *Get

[@debrabeaupeurt1231]

this printer is crap

[@BestPrinters]

Sorry

[@6ft8incyclist]

what

[@6ft8incyclist]

My Printer has printed 6 pages in its live time and had not printed anything but blank pages since EPSON printers are the worst

[@djfar9374]

My Epson ET4850 has printed almost 9000 pages in about 2-3 years, I have just ordered my 4th set of ink bottles. Best and cheapest printer I have ever used bar none.

[@Technotranceism]

Chances are the system is clogged, or has an air pocket in it. Ink tank printers, need to be used very often.

[@shabeermohamed2848]

Epson Printers are a SCAM. Avoid at all cost . I am sitting with 2 epson ink tank printers that are unusable . Basically Epson installed a piece of software inside the printer that forces consumers to pay Epson more money to reset/change Ink pads(which work perfectly). There are no sensors that actually do any checking on ink in ink pads. So, once you hit their preset number of prints, the WHOLE multifunction printer shuts off and you can't use it unless you bring it for servicing. And you can't do it yourself and just change ink pads. You have to pay Epson or its dealer for the reset. Isn't that extortion? Pay us money and let us reset your printer or you will not be able to print,scan,etc??

[@BestPrinters]

You can reset the code with a software. I recently put out a video showing you how to do it yourself.

[@myactualaccountfornow]

I wish I had this video 2 years ago before my epson printer broke down and stipped printing 🫠 but still good to know what the reason is now

[@BestPrinters]

Sorry about that.

[@myactualaccountfornow]

@BestPrinters but thankfully I learned a lot about printers due to that 💪

[@33rorynoah]

Whilst I appreciate this guy posting his helpful advice. Why does he have to repeat the same stuff OVER AND OVER AND OVER AND OVER (See how annoying it is) AND OVER AGAIN. OK, so we need to change the box regularly to avoid costly printer problems.... I GET IT. He doesn't have to repeat the same thing 10 times.... I'M NOT AN IDIOT.... Jesus!