See 7:15 to skip the BLHeli upgrade part and go directly to the BF setup portion of the video.
@voonkhingsheng55414 жыл бұрын
So if the motor temp is high, should i move the slider to the left?
@uavtech4 жыл бұрын
@@voonkhingsheng5541 , yes
@mike216ism4 жыл бұрын
I set up this on all my quads Absolutely incredible. I just built my first race quad. Set up dynamic notch, rpm and bidirectional D-shot. Never heard a smoother quad. Rarely in this world do we get something for nothing. Thanks to Mark we now can have the best performance to date. I'm tuning here in 38° weather. Probably shouldn't be looking for hot motors this cold out. They always come down I've cold. Much appreciated UAVTech. Should be nickname the wizard
@jacuzzijay5 жыл бұрын
I don’t usually mess with betaflight stuff, but when I do I get out a note pad and watch your videos. Cheers mate, very helpful!
@flyingmonkey82454 жыл бұрын
I do that too else I’ll forget it lol it’s like hitting save on a game
@ktmjay99205 жыл бұрын
Your videos are extremely informative and helpful. Thanks bro
@epp1026del4 жыл бұрын
UAV TECH. IS THE MAN!! Learned so much last few weeks from his vids. Keep up the good work!!
@uavtech4 жыл бұрын
Thanks for the support. Means a lot (motivating)!!!
@BornIIfly4 жыл бұрын
Hi I built it! A VCT-85X F4 BlHeli_32 16A V2 omnibussd even has Mobula HD LED at the rear, looks like beast. I just have to tune it now to fly like one. With 3 flight modes, cruising, air & acro. The thing is I'm using a 3S 450 battery but only getting 1:30 min flight time out of it. Which is actually why I'm here, to understand the quad I built more & get smarter. Take care
@trianglesky3803 жыл бұрын
Hi Mark, just wanted to say thank you for your videos. They are very helpful and your website all together makes the perfect online course for learning to work the software on flight controllers and ESC's from the beginning to how to download the programs to how to use them. You and Joshua Bardwell are the Best learning fpv teachers online thank you thank you so much!
@uavtech3 жыл бұрын
Thanks!!! Glad it helps!
@neojeets5 жыл бұрын
Extremely helpful. Thanks to you and the devs for all their hard work👍.
@olafschermann15925 жыл бұрын
I Love you guys for advancing and optimizing our hobby and shouting out this Know-how to the world. Great work, thank you!
@tonysandvig14784 жыл бұрын
Arright! This video helped me so much. My copter flys so much better now. I also used your community preset for 5 inch setpoint tracking and was amazed how much more controlled it felt. Thank you Mark and all the devs at Betaflight!
@Acestrex4 жыл бұрын
I definitely liked this and it helped quite a bit!! That was nice and easy to follow. Thank you!👍
@L0wnoise5 жыл бұрын
Thanks a lot for that video, really great! Was searching the 32.6.6 but now, you dont need "the hard part" much longer ... : ) For BLHeli_32 ESCs, Bidirectional DShot is now a fully supported feature in version 32.7.0. Just upgrade using blheli32 configurator.
@TimeFadesMemoryLasts5 жыл бұрын
Thank you for your hard work on the release!
@mike216ism4 жыл бұрын
I had filters down at 2x today and heard oscillations. Your absolutely right on Mark. With rpm filters were probably going to see noise before hot motors. At least I see your point about going to low. 1.5 was the sweet spot for me. Mu appreciated
@Squirrelses5 жыл бұрын
I especially like the VTx overheat song.
@RaptorFPV5 жыл бұрын
Thanks for the upload, this helped me more than watching hours of other uploaders who talk a lot but don't say much! Cheers
@alfskaar4895 жыл бұрын
I am so excited I just did it last night now I have to go to work before I can test fly it. Watching you video to see if I have missed something. Thanks for all the great information. :-)
@tomvanvelthoven33685 жыл бұрын
Just upgraded my 3 inch Slamnasty to 4.1 and rpm filters! What a difference!!! Waaw!!!! I love it. I just understood the ‘on rails’ thing...
@mike216ism4 жыл бұрын
I just built a 5 slam nasty Amazing quad. What's the lowest you've had the filter Sliders?
@jordannovek29115 жыл бұрын
First, thank you for all your work and for all these super informative videos. Ok Im pretty much a beginner and I have no idea where to start and whats relevant . I have 2 kwads which I never updated in betaflight or Bl heli. I think they are both running 3.5 . Should I always update the firmware? I also have been using BF 10.4. Should I only be using the most recent version ? Really sorry for the long post . Thank you
@epp1026del4 жыл бұрын
Yes. The newest bf 4.1 w rpm filtering is well worth it. And 10.6 configurator has more options and more user friendly
@cheesestickfpv61624 жыл бұрын
Thank you sir! Just flashed my BLHeli_S esc's with rpm filtering
@cheesestickfpv61624 жыл бұрын
I tested everything out today, we have been having some windy days here where I live. But these settings work amazing. Now I need to dig into the nuts and bolts of all this so I can better understand everything.
@BeyondGravityFPV5 жыл бұрын
Just watched it on my break, awesome content as usual. Thanks
@pkvillager5 жыл бұрын
Im really liking 4.1RC3 with RPM filtering, its the first time I like how BF feels since Helio for me. I do have to turn dmin off though, it causes jitter/wobbles on my build since 4.x couldn't fix so I just turn it off same in 4.1. I have all gyro filters off and just run d-term, RPM and the dynamic notch set the same as you show here. I'm just fine tuning the last bit of propwash handling and FF.
@tehllama425 жыл бұрын
Reconfigure it to the DBoost type arrangement - when it drops way down you get a really loose and P-term wobble tendency on quads, but you do get fairly cool motors. If you have a clean setup, DMin of 22/25 kind of range and letting them climb up to 37/44 type of range with TPA rolling seems to work super well.
@pkvillager5 жыл бұрын
@@tehllama42 actually I tried dboost method and it didn't help on 4.0.5 I'll try for kicks on 4.1
@MaxBeamer5 жыл бұрын
Good stuff! Are the rpm filters in 4.1 diff than in 4.0? ALSO will I be able to use it with the radix fc since it’s already at like 35% and gyro is locked?
@uavtech5 жыл бұрын
Tech is the same in 4.1 as it is in 4.0, just easier to turn on. Good question on the Radix. I do have one of those boards to test.
@fuudgenut5 жыл бұрын
@@uavtech would be cool if you would do a video with the radix if you had the time. I've been running 4.0 and rpm filter and loving it, need to try 4.1 and see if it can be even better. I have a feeling that the radix will get a bit hyped now when vanover started flying for brainfpv. Thanks for all your hard work Mark
@MaxBeamer5 жыл бұрын
UAV Tech it works fine I just flashed it no increase in cpu or anything gyro locked at like 3196khz or whatever 👍👍
@uavtech5 жыл бұрын
@@MaxBeamer , yeah gyro rate doesn't matter as long as the PID loop is.completing its calcs on time.
@stonedDawg3 жыл бұрын
hi, this is a good explaination! but why do we need not to do the DMA configuration? the DMA should help a lot with the delay, no?
@adamjuszczyk19805 жыл бұрын
Great tutorial Mark ...huge thanks Mark 👍
@MrJarrod4 жыл бұрын
Thank you for your time and dedication .
@BornIIfly4 жыл бұрын
Hi just wanted to mention if my motors blow I'm gonna send 'em to you as a souvenir ; ) I'm joking. Trying your setup on BetaFPV F4 V2 BlHeli_32 16A. Have a relaxing weekend & good flights! Take care
@Sully3655 жыл бұрын
Good stuff. Do you think notch filtering will be standard on blheli s and not just 32 at any point or is that strictly jesc firmware
@uavtech5 жыл бұрын
Strictly JESC for BLHeli_S. BLHeli devs don't do coding on BLHeli_S anymore. So Joe forked, improved, and called it JESC.
@HaraldLabout5 жыл бұрын
Great video again Mark, thanks. Just flashed BF4.1 this morning on my Matek F722SE for MX Chameleon Ti. How about PMW freq and Motor timing?? Some people suggest a PWM freq of 48kHz and motor timing on Auto. Any ideas on that???
@Danimal-3D4 жыл бұрын
So no specific needs for BLHELI ESC settings like dmag, motor timing, or PWM freq?? This was really important for FlightOne/ Falco stuff... looks like you just run defaults
@LEmon-ln3sj5 жыл бұрын
Ok i just finish this video and i want to say BIG thanks for that, is everything what i need to set! awesome keep it going :D
@PenPeng4 жыл бұрын
Given you haven't made an update video I assume all of this still applies to 4.2, correct?
@uavtech4 жыл бұрын
Yup
@PenPeng4 жыл бұрын
@@uavtech awesome! Really great video by the way
@uavtech4 жыл бұрын
Thanks!
@aowi72805 жыл бұрын
Can you post some shots of what the maximum noise should look like after filtering? I am trying to find out how much filtering is too much.
@caymandiver755 жыл бұрын
UAV Tech do you still suggest setting the Gyro RPM Filter Harmonics number to 1? Saw are recent video by JB and he mentioned 3 was now the preferred number. Thanks!
@uavtech5 жыл бұрын
go with 2 or 3.
@Politicallyhomeless9573 жыл бұрын
Building again and damn I needed this vid. Thanks brother!!
@DzinoRC5 жыл бұрын
Is it mandatory to use RPM filter with Bi-directional DShot communication? I have ESC with telemetry. Wouldnt be better in this case use separate wire (UART) to get teletry data and FC would send only base Dshot commands to ESC? BTW: Thanks for detailed instructional video!
@uavtech5 жыл бұрын
No. RPM only works off BiDirectional. Normal Telemetry is too slow.
@philthayer40874 жыл бұрын
Nice channel! With stock pids whenever I punch out or let off my quad tilts to left...what would you suggest?
@uavtech4 жыл бұрын
Angle mode?
@epp1026del4 жыл бұрын
Good vid man. To the point. In a decent amount of time. Subbed after first five min
@uavtech4 жыл бұрын
Welcome!
@iflyfpv59275 жыл бұрын
In a few more weeks you are going to really be teaching me hands on, on how to operate betaflight 4.1 and what you just did to the cleaning up of the rpm filters for my esc’s. Thank you sir #UAVTech... 😎
@dronejourneys95345 жыл бұрын
I think betaflight is getting more and more complex every release. I loved the sliders because you can change your settings faster than ever and be back in the air in a sec to test. With all the filters there are so many variables that go in the quad that novice pilots will lose track of all thats going on. I hope next release we will have an automatic tuning quad based on blackbox log files ;) saves us all many hours ;) Thx for all your vids m8. Keep up the good work
@uavtech5 жыл бұрын
Filter are more automatic as this setup works for EVERY quad class. Also PID sliders should make it easy too.
@tehllama425 жыл бұрын
@@uavtech The feature creep is real, but the sliders, improved defaults, and to some extent having more people experienced enough in the FB group to start helping others is going to start paying huge dividends. I need to get off my backside and start making some IF/THEN tuning decision trees to help with, and let that be a structure that can be updated with each release.
@dronejourneys95345 жыл бұрын
@@tehllama42 Yeh, a checklist to go through would be nice. Maybe even a csv export of some kind that compares numbers with a macro and gives you advise. Per example, overshoot on your P gain vs your setpoint or undershoot on pgain on your set point. I wonder if that could be done, one thing is for sure, that would be a hell of a job....
@tehllama425 жыл бұрын
@@dronejourneys9534 I'll take a stab at it, or help anybody doing just that. Even a mediocre first effort can be built on.
@jrb80814 жыл бұрын
You are absolutely incredible, Thank you.
@butcher5 жыл бұрын
Great infos again! One question: Has any connection between the pwm frequency and the rpm filter? Does it matter if I set up the pwm frequency to higher khz?
@uavtech5 жыл бұрын
No connection.
@creat3dlab124 жыл бұрын
Mark, how relevant is the step #1 in your PID tuning series taking in consideration RPM filtering?
@uavtech4 жыл бұрын
Still same gist, but now set RPM and move sliders.
@dimitrishatzis90555 жыл бұрын
This is great! Could you do a video of tuning a 2.5 or 3 inch? There are a lot of people flying these toothpicks, and I feel the videos here are mostly focused on 5' inch quads. Thanks!!
@uavtech5 жыл бұрын
I plan on it. I have an iFlight 16x16 stack on the way with flash to use BB as an aid.
@dimitrishatzis90555 жыл бұрын
@@uavtech Thank you!!
@paulstone97555 жыл бұрын
I flew this same setup as in the video on a DALRC Rocket ESC.. DALRC F7 FC. Stock PIDS and it flew amazing.. Loved it.. A little loose for my liking but very nice.
@uavtech5 жыл бұрын
Loose. Increase P and FF.
@paulstone97555 жыл бұрын
@@uavtech I did increase the P on Pitch and Roll +5 on each got tighter next time I will increase the FF.. But it flew so good.. Really good. The RPM filters are really amazing..
@4DCResinSmoker5 жыл бұрын
Quick Question: Dyn Filtering for 5" quads can be set to med-low but on the BF 4.1 info bubble what I is see is this: " HIGH(230-800hz) for very high revving 2.5-3 inch quads." What recommended Q, Width and Min Hz would you suggest as a good starting point for a 3" copter?
@uavtech5 жыл бұрын
Defaults. Med. or High.
@adroc98415 жыл бұрын
Thanks for the tutorial. Cant wait to try this.
@M0rdH0rst5 жыл бұрын
Thanks, this looks like a little weekend project. I'm still having a little too warm motors on my main 3D-quad and that's because it's a compromize with propwash handling the bad propellers 🙃 Maybe this filters will give me a better deal 🖖
@fcass5 жыл бұрын
Where is the link to the wiki you said was in the description? Also, is that the same place to find esc firmware for sale for my s_heli escs in the betafpv 75pro2? Thanks
Thanks for the vid! So when is the new configurator going live?
@uavtech5 жыл бұрын
Rc1 of it is live already.
@alessdiazlopez544 жыл бұрын
Do you think your tune on the video could works well on a 3 inch hd quad? Thanks a lot!
@Jaloman905 жыл бұрын
So do I understand this correctly? The new basic filter strategy in BF4.1 is, instead of turning off as many low pass filters as possible, would be to turn on RPM filter, leaving the other filters at default and then just increase the gyro and d term multipliers as much as possible?
@uavtech5 жыл бұрын
Yup.
@Djamboo5 жыл бұрын
Nice tutorial, thanks for explaining everything!
@MCsCreations5 жыл бұрын
Fantastic, dude! Thanks a lot! 😃 That seems much easier!
@mbycfpv89375 жыл бұрын
Thank you. Great video. Do you know if the newest bl heli 32.7 will work?
@uavtech5 жыл бұрын
I'm not sure. I'm thinking no for now.
@brandonwoodford5794 жыл бұрын
Hey Mark, I've done pretty much everything on 4.2 to try and get the mid-high speed wobble. Is this due to the TPA being changed from the .10 at 1250 to .60 1650? Down low everything is fine. Above half throttle induces horizon wobble.
@uavtech4 жыл бұрын
Try changing TPA from D only to P&D in CLI.
@coooxd4 жыл бұрын
Have you fixed it?
@waldemarkraus28554 жыл бұрын
I saw in your delay calculator that the rpm filter harmonics start at 340hz. Are these harmonics adjustable? The most noise on my raw gyro data is from 80-300hz
@uavtech4 жыл бұрын
it follows the motors. There is a slider at the top of the sheet.
@blackmennewstyle5 жыл бұрын
Are the BLHeli_32 devs are actually planning to make a stable release of all these stuffs one day, there are so much changes, improvements and new ideas coming out lately, it must be hard for them to just think about it lol Amazing video as always! Happy midweek and keep on flying :)
@uavtech5 жыл бұрын
I would hop so.
@zero-voltzfpv57155 жыл бұрын
Mark, love your videos! Trying to flash my esc's and keep getting a "Missing_Record mark at file start error" I have flashed many times before and have never seen this. Any Ideas??
@uavtech5 жыл бұрын
Make sure you click the HEX, and then right-click the "Raw" button and click download link. See 5:30 in the video.
@zero-voltzfpv57155 жыл бұрын
@@uavtech thanks, ended up re installing the configurator and got it to flash finally.
@crashtestdummy_fpvctdfpv91005 жыл бұрын
Yes! Thank you Mark!
@r1dv5 жыл бұрын
Thanks man. Going try my 1st rpm filter kwad😀
@charlesbeach21534 жыл бұрын
great explanation, sub'd and will watch more of your stuff.
@rodrigo1255 жыл бұрын
Thanks for the video! Im running iflight succeX twinG F7 FC with iflight 50A 4-in-1 ESC, just tried 4k/4k-DSHOT300 and 8k/8k-DSHOT600 Both errors stay at 0%, then I made the motors run at 3k RPMs to check the tasks and on the 4k/4k setting im getting Gyro/PID max loads of about 38 to 40%. With the 8k/8k setting, im getting about 79-81%, saw a spike of 85%. Would you say its safe to run this setup at 8k/8k since the motors seem to be running smoother or should I be better off staying at 4k/4k?
@uavtech5 жыл бұрын
If errors are ok and tasks is below 100%, you should be fine.
@mike216ism4 жыл бұрын
Now updating your blheli_32 firmware is easier than ever. Use your phone or computer. There's no reason everyone using betaflight couldn't easily update everything and use bidirectional D-shot. Definitely worth it everyone! You think kiss or racelight run amazing then try this. All my quads run betaflight now.
@Tritorpol4 жыл бұрын
Thanks! Hopefully I can get my 10inch to stop oscillation only shows in the GoPro with hyper smooth off. Fpv feed is super smooth without oscillation.
@AlvinYeoh5 жыл бұрын
Regarding motor noise harmonics, do these just show up as secondary peaks (or motor peak line in the waterfall graphs)? Basically, how do you tell if you are getting harmonics or not?
@uavtech5 жыл бұрын
Secondary band of noise in the waterfall graph 2x the Fundamental Noise.
@brandonwoodford5794 жыл бұрын
Hey Mark, have you had issues with blackbox logs logging. When going to read the log via MSC, it says "error opening log: no log in this file could be parsed successfully" I have this happen on two different quads running omnibusf4sd 4.1.3 its always logged fine pre4.1.3. The file size is correct for a log, just wont read. Logging at 2k, gyro scaled. Got the first flight, but the second is unreadable. Other quad had both logs, but could be read. Any ideas?
@uavtech4 жыл бұрын
Take out SD card and copy manually.
@brandonwoodford5794 жыл бұрын
I did found out that if take the sd card out, and copy files all the logs are good. Maybe my USB is bad, or something else. Thank you tho
@philip-sancho4 жыл бұрын
Are these two Betaflight CLI commands listed in the instructions on the Bidirectional DSHOT Github page required for RPM filtering? set dshot_burst = OFF & set scheduler_optimize_rate = ON . My understanding is that they are just two tests you can run before enabling bidirectional DSHOT on a given FC and not required if RPM filters are already working? I ask because Albert Kim has these as instructions in his how-to video.
@uavtech4 жыл бұрын
They turn on automatically when you enable Bi-directional. No need to test either.
@philip-sancho4 жыл бұрын
@@uavtech Thanks for clearing it up!!
@MrTeeseeone5 жыл бұрын
Nice, thanks man! :D Going to try this asap
@paulmccleary68754 жыл бұрын
Can I still apply these recommendations I have Bettaflight 4.1.4 licensed JESC sucexx FC ESC F4 Nazgul 5 AS OF TODAY ??????
@uavtech4 жыл бұрын
Yes.
@paulmccleary68754 жыл бұрын
UAV Tech Thank you for responding so fast !!!! Awesome videos. I’m watching every single one of the newest videos on Bettaflight 4.1 now. Thank again for all your hard work !!!!! 😓
@bobbfwed5 жыл бұрын
You don't have to to enable the Bidirectional DShot setting on the Configuration tab?
@uavtech5 жыл бұрын
You do. I did.
@epp1026del4 жыл бұрын
Quick question. Any advantage to running pwm 48khz over 24. BLHeli 32. F4 fc 5in 4s. Just curious some people saying it’s better. Some what of a noop. But love learning all that I can
@uavtech4 жыл бұрын
varies on the quad. generally seems makes for smoother motors, but may also decrease motor breaking torque too.
@epp1026del4 жыл бұрын
Thanks for reply man. Studying all your vids. Wish I came across sooner. I’m gonna run the default 24 some more. If not needed not gonna change to 48. I’m blown away with the 4.1 rpm filtering right now anyway. But it’s good to know. Seems to be racers like 24 and freestylers like 48. From what I gathered researching. Now I gotta do 4.1 rpm on all my kwads. Thanks again
@epp1026del4 жыл бұрын
Forgot to ask. Do ya have to reflash esc s to change the kHz to 48
@uavtech4 жыл бұрын
Yes, if BLHeli_S.
@epp1026del4 жыл бұрын
T-Motor F45A 3-6S BLHeli_32 ESC.
@h2o-fpv6235 жыл бұрын
Thank u very much for this video it did help me .
@martinverbaas5 жыл бұрын
Why don't you turn off the second lowpasses anymore (or even the 1st lowpass on gyro)?
@uavtech5 жыл бұрын
trying to conform to the slider approach of just moving things up higher instead of turning off.
@tehllama425 жыл бұрын
If you're able to make them PT1 and sit above 200Hz, the phase delay is pretty much negligible in areas we care about, yet they still provide great high frequency noise elimination that helps keep motors cool. The big ticket to getting great handling is cutting phase delay in the 40-90Hz range, so once those aren't contributing they can just go up and out of the way.
@jdm7245 жыл бұрын
I agree... im more pro turning off than moving sliders up. Sliders up means that for instance a gyro filter is so high that it doesnt do anything anymore but is still active (and causing delay) Im still going to turn of the gyro filters and work with rpm & dynamic. (And of course dterm) Its silly to have so much filters active even if they are low latency.
@dr.manueldominguez5 жыл бұрын
Awesome as always 👏👏👏
@taterfpv5 жыл бұрын
Does anyone else have a dedicated UAV Tech folder on their computer now? :) I had issues with RC2 and a MatekF7 where the mass storage for blackbox would auto dismount after a few seconds. Gonna give her another go! This is easier than earlier setups for sure. Is there a way around entering the VTX channels manually after every test flash? Or more likely ..I am just missing something in the CLI :) Did that prompt on flashing just auto-apply the snippet for the unified target? Seemed that way...that is cool! Thanks again for all the excellent content.
@uavtech5 жыл бұрын
Unified target flashing in 4.1 is seamless now. Just grab your target like normal. If it does not say "Legacy" after the target name, then that is the new Unified Target that flashes the unified hex and sets up the config for you (seemless). For the VTX tables: type in "VTXTABLE" in the CLI. You can save to a note pad and dump back into the CLI anytime.
@taterfpv5 жыл бұрын
@@uavtech Thank you sir!
@EvolveAirbrush5 жыл бұрын
Upgraded all my stuffs, i hope that it won't fly to the moon XD Thanks a lot, great video!
@paulstone97555 жыл бұрын
I was fine..
@edwinkoolen15094 жыл бұрын
Will the BF4.1 and RPM filter also work on teh bigger quads (beast and X class) when working with blheli32 esc
@uavtech4 жыл бұрын
Yes. If BLHeli_S or 32 ESCs.
@joevo24 жыл бұрын
If my motor is hot I suspect due to my GoPro mount do I add more filter than the default? Moving the slider I meant
@Mateyhv15 жыл бұрын
I have seen no explanation what Dynamic Notch Q is. Are you going to update the .xls filter for Betaflight 4.1? Thanks
@uavtech5 жыл бұрын
It is literally a value in the filter equation (direct) that controls the width of the notch filter. Higher Q is narrower notch with less phase delay.
@JonasCE5 жыл бұрын
what about the rest filtering? (gyro low pass filter & D term low pass filters) Should I turn them off? or it is better to set them as I have them now on BF 4.0.3? Thanks in advance
@uavtech5 жыл бұрын
Move up the sliders as far as you can. So move the Gyro and D-term sliders one step at a time (together) until flight characteristics get worse, or motors get hot. OR if you 4.0.3 filter setup is working great for you, use it on 4.1.
@JonasCE5 жыл бұрын
@@uavtech thanks a lot my friend! you are doing an awesome job! Filters in BF4.0.3 were set according to your previous videos and working perfect so far. I will use them in 4.1 then. Have a wonderfull day, cheers from slovakia👍
@4DCResinSmoker5 жыл бұрын
Do the ESC's need the telemetry wire connected for this filtering to function? (bi-telemetry)
@AlvinYeoh5 жыл бұрын
You don't. The required data is sent via the signal line. Telemetry line not required.
@4DCResinSmoker5 жыл бұрын
@@AlvinYeoh Had to ask as its always the un-said things that end up being the problem.
@AlvinYeoh5 жыл бұрын
@@4DCResinSmoker No worries. Better to ask than to assume and then screw something up.
@AlvinYeoh5 жыл бұрын
@@SPotter1973 Did you flash the legacy or the non-legacy version of your board? The non-legacy version is the unified targets one and after flashing and first connection to configurator, it will ask you to apply some defaults. Did you get that?
@killawatt40585 жыл бұрын
Do you need to run the ESC telemetry back to the flight controller for rpm filtering to work? I never bothered running telemetry because It never really had a purpose up until now.
@uavtech5 жыл бұрын
Nope. U just need latest ESC firmware. It does it over the signal wire (bidirectional).
@killawatt40585 жыл бұрын
I was dreading having to pull everything apart, you just brightened my day. Thank you for all the information you bring to the community.
@slicksix88925 жыл бұрын
Thanks for this man👍😉
@marcusmckay81205 жыл бұрын
So does it work now with motor remapping, because the last time I tried rpm filter It cooked a motor and destroyed my 4 in 1 blheli_32 ESC?
@uavtech5 жыл бұрын
Yes. No more DMA or Timer ramapping. That said, i did remapping on the old way and worked fine so IDK what was up in your case.
@Antoz11035 жыл бұрын
i will try ur dynamic notch filter settings on my 6s 5 inch quad because i have some propwash. i am very new to this hobby and trying now to tune my pids and filters :_D
@uavtech5 жыл бұрын
Make sure to check out my PID Tuning Principal series.
@abhishekmuttath67255 жыл бұрын
Actually my percentage Error value in motor tab is coming around 0.08-0.11 is it fine ?? or what to change to make it 0.00 (without props)
@uavtech5 жыл бұрын
On 4k?
@yosobodo15 жыл бұрын
i tried, and followed all the directions, my quad flips out on take off now. i really want to try this but dont know what to do. I think my esc flash went wrong bl heli says its a typhoon32 but i have a tekko32. please help
@yosobodo15 жыл бұрын
Josh Elam i did, everything is correct props and motors direction. Flew fine before update
@Jamaicarasramarc5 жыл бұрын
Hey my hero 🦸♂️ I don’t can turn on the bidirectional Dshot ?? Save and reboot and it’s off..... In the Motor tab i don’t see the rpm.... Thank you in advance 👊🏻 Greetings from Germany 🇩🇪
@Jamaicarasramarc5 жыл бұрын
And i don’t see the rpm filter tab in the filter settings...
@uavtech5 жыл бұрын
Need to update BLHeli to GCR firmware, be on 10.6 configurator and be on BF 4.1-RC.
@Jamaicarasramarc5 жыл бұрын
Now it works, I forgot turn on Full chip erase 😬 Do you have dumps for a 7 inch filter setup ? Greetings from Germany 🇩🇪
@edouardmalot515 жыл бұрын
Yes Notch filter have less delay but there is 12 notchs (4 motors * 3 harmonics), so at the end do we really have less delay on a "Clean" quad with LP quite high ?
@edouardmalot515 жыл бұрын
Ok sorry, you reduce the number of notch on harmonics to 1, so...
@uavtech5 жыл бұрын
Exactly.
@neilfpv5 жыл бұрын
Thank you so much! Can we use it now?
@fpatv76475 жыл бұрын
very good as usual!
@BRadFPV5 жыл бұрын
I too had 3 ESCs head scratch :)
@tomvanvelthoven33685 жыл бұрын
Great stuff man!! Thanks!!!!
@brandonwoodford5794 жыл бұрын
Can you have esc telemetry and rpm filtering enabled at the same time?
@uavtech4 жыл бұрын
I think so.
@brandonwoodford5794 жыл бұрын
Yep you can, I just double checked.
@highestvirtue18924 жыл бұрын
What exactly is a snipet again? Do I need to download that to make the RPM Filter work?
@uavtech4 жыл бұрын
What Josh said. Thanks Josh!!
@highestvirtue18924 жыл бұрын
If i flash new firmware in BLHeli to the ESCs n Betaflight 4.1 screws something up for me is there a way to put the old firmware back on the ESCs n go back to 4.0? And how do I do that? Thank you
@uavtech4 жыл бұрын
You just flash back to old releases.
@highestvirtue18924 жыл бұрын
@@uavtech But how do I find out what BlHeli release is on there now and how do I get it back later?
@uavtech4 жыл бұрын
Connect with BLHeli_S configurator.
@highestvirtue18924 жыл бұрын
@@uavtech i hv BLheli32 though??
@uavtech4 жыл бұрын
@@highestvirtue1892 , it won't screw anything up. Lots have flashed 32.7 already.
@giuseppecavalieri53104 жыл бұрын
Hi, can I follow this guide to start tuning a 7 inch quad? O what I have to change? Thanks for your answer
@uavtech4 жыл бұрын
same setup for 7"
@giuseppecavalieri53104 жыл бұрын
Thanks a lot man
@dbugman685 жыл бұрын
I love your videos, but please TURN DOWN THE VOLUME on your intro music. and please turn up your wonderful speaking volume. Thanks! Keep up the awesome work!