Betaflight Diag - OSD Text not appearing in goggles!?

[@ryankerniskey836]

bro!!!!! you just saved my computer and drone from being chucked out the window. Thank you for this video.

[@TookieFPV]

It worked! Thanks for the video Troncat. You saved me a ton of time. Newbies need all the help we can get.

[@torinjohnson6450]

Glad it helped you!

[@julitovlogiando]

mines dose nt show up....i dont know ewtf is going on

[@brycellewellyn3483]

same, all i see are some dji gogles settings. nothing from betaflight osd ddisplays

[@bugmanmd1576]

yup, me too, just upgraded to betaflight 4.5, no OSD UPDATE : go to PORTS tab, my DJI 03 is connected to UART1, so I had to move the slider for UART1 to the right, under "MSP", then all the way at right, under "peripherals," click the dropdown and specify UART1 to say "VTX(MSP + ...") that got me going... OSD now working. I found out if you have a DJI 03 air unit, you don't need to do anything in the "video transmitter" tab. Don't need a VTX table, because Betaflight does not control the DJI 03 air video transmitter. If you have DJI Goggles2, you also have to go to the goggles: settings, display... and see where they are set to SD view - change that to HD view. Hope that might help someone. Wish I could post an image here.

[@un_ours_blanc]

Thanks a lot dude that was a simple issue but not easy to guess at first

[@swetunafpv1856]

it worked for me also thank you, i almost ended up in buying a new vtx because of this.

[@TRONCATFPV]

glad it helped!

[@alexanderbeneke51]

Great! So simple and I was worried I messed up my wiring... Thanks!

[@TRONCATFPV]

Glad it helped! Thanks for watching 👍

[@davidforshee5036]

Thanks for this video! It was super helpful!

[@xymaryai8283]

i have the visual beeper element below the batt level and quad name, but neither of those appear despite visual beeper being there ...???

[@xymaryai8283]

wait lol i figured it out, it was the wrong OSD profile

[@Roboticarlos115-f8w]

did you flash your FC with the right OSD protocol? be careful with that.

[@lfrecords3970]

mine shows most of the options which turned on but some are not..i use dji goggles..its sure not out of screen ...one important like Lqly settin is not showing in goggles....

[@lfrecords3970]

@@TRONCATFPV just got it too like 1 week ago new drone 6s with the dji goggles and radiomaster t16 with crossfire..all work perfect except this tiny detail

[@testtube1020]

Thanks Troncat! This video really helped ;-)

[@TRONCATFPV]

I’m glad!! Thanks for watching 🙌

[@hamishgurung9283]

Hi, will anyone help me to solve this issues? In my dji fpv goggle i added altitude and home location through Betaflight osd, while im flying my drone i can see the altitude and home location arrow text in the goggles but doesn’t show the distance in meter nor heights?? thank you

[@torinjohnson6450]

I wish I knew more about the DJI system to help you, in the future when I go digital I will try and replicate this. Let me know if you were able to fix it!

[@tane388]

Tnx it was very helpful ☺

[@TRONCATFPV]

Glad it helped!

[@Julflips6]

you are moving your camera like a guy on tik tok...anyway thx you fixed it for me ;)

[@torinjohnson6450]

lolol, glad it helped!

[@NorgeSquad]

My problem is that I think the OSD chip is dead

[@grumpyfpv6202]

Im such a stupido🤦‍♂️ thanks man you really helped me out!

[@TRONCATFPV]

haha, glad the video helped!

[@leshyei5604]

Thank you 🙏

[@panynpatsa4191]

Thank you so much

[@TRONCATFPV]

Im glad the video helped!

[@neil9184]

thanks mate

[@Daalive]

THX :D