Beyerdynamic Headphone Detachable Cable Mod DIY

[@TechscrewDIY]

Parts on Aliexpress: - Socket bit.ly/3nNI2Ag Parts on Amazon: - US Socket amzn.to/2RCxXYM - UK Socket amzn.to/3c7bk8a - DE Socket amzn.to/2qqkIAj Replacement jack on Aliexpress: - s.click.aliexpress.com/e/_DeDlyiN Replacement jack on Amazon: - US amzn.to/3RTV1ks - UK amzn.to/3HmPbTN - DE amzn.to/3O5pue5 affiliate links

[@Drsouza69]

Thank you so much for this video. 2:13 Was exactly the picture I needed. Over years of use, the original cable on my 990's ripped 2 of the 3 wires out of the solder connections inside the Left Headphone. This video was the only one that clearly showed the board and the connections. Couldn't find a schematic online, and all other videos on the 990's didn't show a close up of the primary/left ear board. Re-Soldered them, and they work just fine.

[@Totto70770]

Thank you for the guide. MUCH more sensible than most other cable mod videos/guides. Especially for the soldering part. Almost every other video shows soldering the cables to the speaker PCB, which is way riskier than just cutting the cable long and only soldering to the jack connector. Also much more sensible with opening the hole up. Most other videos imply that you have to use a dremel tool.

[@TechscrewDIY]

Thanks, that's true. Soldering cables to the speaker PCB can damage the small wires connected to the speaker's voice coil, which could render the driver unusable.

[@mr.stampftech7050]

Thank you so much for this video!!! Because of you i was able to fix my DT770 Headphones (Left side was broken) all by myself with this cool detachable cable upgrade. Much love from germany :)

[@durftangster6994]

MISSION UNCLEAR, pads were lifted because i evidently have Parkinsons and now i am out a set of headphones, thanks!

[@robotjellyfish3209]

can i just pay you to do the mod for me? my cable on mine is trashed and im useless at diy. does anyone know who does modding for this headphone?

[@punknugget561]

Good job with the video. Thank you.

[@TechscrewDIY]

Glad you liked it!

[@aftaba3381]

Are the White Cable always Left, the Red Always Right and Black Always Ground?

[@TechscrewDIY]

no, always better check with multimeter.

[@aftaba3381]

@@TechscrewDIY How can i check them with a multimeter, im a little bit lost. I know what the socket is, but for the headphone driver cables. How do you tell if the Black is Ground ect.

[@TechscrewDIY]

@@aftaba3381 just use multimeter in resistance mode - kzbin.info/www/bejne/eH6ykol_Yt6bfck

[@silversilver2]

Nice one!

[@jupiterapollo4985]

Is it better to do the miniXLR mod or the 3mm jack mod?

[@TechscrewDIY]

3.5mm audio cables are more popular ar cheaper.

[@jupiterapollo4985]

@@TechscrewDIY Thank you. One more question, does miniXLR give better audio over 3mm jack or is it pretty much the same?

[@spaantz]

@@jupiterapollo4985 People will argue as to whether it's any better, but most would say there is no difference. I say there's no difference

[@aeko]

@@jupiterapollo4985 Was also wondering. Did some research on mini XLR: Balanced Audio Support: Typically supports balanced audio, which can reduce noise and interference, especially for long cable runs. Durability: Mini-XLR connectors are more robust and less prone to wear and tear compared to most 3.5mm jacks. 3.5mm is unbalanced often but is also more convenient. Likely wouldn't make a huge difference assuming connectors and cable are good quality.

[@theandroids]

no idea why all headphones don't come like this to begin with.

[@TheFalahgrapher]

I would much rather just pay someone to do this for me