BF P90 v4 Gel Blaster new launch in Oct 2023 unbox/review

[@akgelblaster]

Order from AKgelblaster: akgelblaster.com/products/bf-p90-v4-gel-blaster-new-launch-in-oct-2023

[@AE1OU]

Sure took bing feng such a long time to update to version 4 with all the proper features we been looking forward for a p90 since 2018 - a threaded muzzle instead of the friction fit muzzle cap - a proper fire select with auto, semi and safety - magazine now has mock printed bullets instead of just a clear plastic - battery location at the butt instead of the small ejection port on the bottom The only thing would make it better if version 4 also cames with side picatinny rails and in other colors like OD green or tan.

[@MrSierra116]

Does the charging handle work now ? i dont think it does Also the mock bullet sounds nice but it looks horrible upclose, i'd rather have clear mag like older version tbh Very excited for this version, wonder how does the gearbox look like. The gearbox set at the end of the blaster meaning we can quick change the spring on the go, which is really nice, like the SIG552

[@AE1OU]

@@MrSierra116 Charging handle very likely mock. Wouldve been better if the charging handle could preload the gels into chamber but little baby steps in the right direction for bing feng. Maybe in another 6 years they would release a version 5 closer to airsoft specs🤣🤣🤣

[@donilaks]

I also prefer clear mag so i can see how much ammo i got left.. Especially when the last dozens of gel ball can only be emptied by gravity

[@tylerblalack6684]

Great news! You can get it in hot pink! Charging handle does nothing in electric airsoft guns too. Including the $400 p90.

[@북이거-e9z]

Thank you for your review. It was helpful.

[@mauriciohh6y00]

Nice weapon.

[@docbob3030]

Great review, certainly a good looking P90 that is a good improvement over the original 👍

[@akgelblaster]

Thank you!

[@amielcasano1052]

This will probably my second gel blaster that i'll get.

[@The199]

My v4 usually double feed with 7.5mm gels, I think the T-piece where it receives gel ball from the magazine being to wide at 10.5mm so gels can stack and slide in the T-piece 2 at a time. No battery or spring change can solve this. The v3 T-piece and the hole in the blaster is much better, never had feeding issues. Such a bummer

[@buhaytourguide]

I will buy this next. I upgraded my HB v2 in M110 spring. . I dont know what i am upgrading next can you give me tips to i can buy the right thing?

[@akgelblaster]

Replace the o-ring if possible. LDT gearbox works well with HB

[@scroogeyscroogey5177]

Do gel balls fall into the large hole on it?

[@BotConnorrr]

The fire selector of mine has become a bit hard to move. Should i try to apply a lubricant like WD40?

[@akgelblaster]

Yes, it will work it’s due to normal wear and tear. Update: check the type of wd40 used.

[@BotConnorrr]

​@@akgelblasterHow can I apply it? Do I need to disassemble the blaster, or can I just put it in the edges and move it?

[@tylerblalack6684]

Do not use wd40 to lubricate. Especially near rubber things(like O rings) Use super lube multipurpose lubricant.

[@anastasiatanaseraphina810]

When will this p90 have its version of the clips made independently available to buy?

[@akgelblaster]

Hey you mean you want to buy more mags? If yes, leave us a message and we can help

[@anastasiatanaseraphina810]

@@akgelblaster It was more for own curiosity but I was wondering when the V4 pink mags for this toy would be out? (I know that there are black ones but I am more interested in finding out about the pink ones.)

[@akgelblaster]

@@anastasiatanaseraphina810 v4 pink is already out and available

[@anastasiatanaseraphina810]

Yes, I know the p90 v4 pink is out but where can I get additional pink v4 clips is what I am asking. @@akgelblaster

[@akgelblaster]

@@anastasiatanaseraphina810 yes. Dm us in shop inbox

[@MarvinPalumar]

Metal gears?

[@akgelblaster]

The current v5 comes with metal gears: akgelblaster.com/products/bf-p-90-v4-gel-blaster-new-launch-in-oct-2023?_pos=1&_sid=752f4bc06&_ss=r&variant=43220369342645

[@BotConnorrr]

I've run into a problem with mine where it would sometimes stop for no apparent reason, even on semi-auto. It happened a few times, and every time it happened, I got it running again by either messing around with the fire selector or by pulling the charging handle. What could be the causing this problem?

[@akgelblaster]

Do you know is it with the battery? It has nothing to do with the charging handle

[@BotConnorrr]

@@akgelblaster I tried the battery on a different blaster and it worked fine I put a different battery in the P90 and it still had the same issue

[@akgelblaster]

@@BotConnorrr hello, if you are ordering from us, do you mind to send me the order number? Email: [e-mail]

[@StarkhPaintball]

How many FPS out of the box ?

[@akgelblaster]

250fps

[@lol-kf2fq]

Can I use an 11v battery with it?

[@akgelblaster]

The fire rate is not very high even with 11.1v, so I will say yes. But depends on what battery as well.

[@donilaks]

Can we use v3 mag on this v4?

[@akgelblaster]

Edit: sorry I thought you mentioned SLR. It may not work

[@donilaks]

@@akgelblaster i already have p90 v3 with an extra mag, i thought it would be nice if those can be used on p90 v4

[@akgelblaster]

@@donilaks will take some photos for you to compare

[@donilaks]

@@akgelblaster thank u, appreciated

[@The199]

I have both v3 amd v4, they are not compatible

[@robert-h2x]

hi my crush

[@akgelblaster]

Hey