Bicycle Coaster Brake Repair/Repack/Service Schwinn 20 inch

How to correct symptoms of loose wheel / wobble Or binding up.
Simple straight to the point easy-to-understand reassemble of Coaster brakes.
0:00 Bearing binding
1:01 Disassemble bearing assembly
3:31 Understanding intricate internal parts
4:10 Pre-assembled bearings & sprocket on the shaft
5:19 Dri-Fit Assemble
8:24 Grease all parts
9:00 Final assembly
10:49 Test / Adjust
11:25 Overly excited@comment section

[@imlach4318]

One of the best dissemble videos I've ever seen mate, really clear and to the point. Much appreciated! Not played much around with coaster hubs but I've got one I need to service, this will definitely be on repeat as I drink myself to oblivion putting it back together.

[@wildwoodtop]

You are welcome 👍 Oblivious drinking 🤟

[@ItsMrReaper]

Incredible video, man. I couldn't find a tutorial this detailed for my bike. I appreciate the extra mile you went through to make this video more easily understood.

[@wildwoodtop]

You are welcome 🙂 Thank you for the thoughtful comment 👍

[@Paradox3627505]

I recently utilized your content in assisting me with my reassembly. I appreciate your emphasis regarding letting gravity hold the mechanisms in place while the other hand rotates the sprocket, seizing everything into place. Thank you for posting!!

[@wildwoodtop]

You are welcome 👍

[@aaberry70]

Something like " I dont know the names of some of these parts but Ill make some up as I go along." 😂Subscribed!

[@wildwoodtop]

Adam 😋 Subscribe Back@cha! 🤟

[@michaelkekatos4472]

I was driving myself crazy I couldn’t get it to sit correctly. Thank you so much very informative.

[@jacobwilson4869]

Very well done! Concise and to the point without all the attempts at being funny. I appreciate that.

[@wildwoodtop]

You are welcome 👍

[@jayrobinson75]

excellent tutorial helped me solve the clicking coming from a rear hub of the same bike.

[@BriansRCStuff]

Was it just a matter of adjusting it? Thanks!

[@lonnieashley]

Excellent tutorial. Thanks a million! I had to go through several and yours was the first that was the same. Putting the brake pads in is what was most helpful to me.

[@wildwoodtop]

You are welcome 👍

[@michaelgossett1415]

Clear, concise and straight to the point. Thank you, too many times instructors want to give life stories and run on comments.

[@wildwoodtop]

Could not agree with you more 👍

[@beebaa]

Great content, exactly what I needed! Great explanation on the order of the parts!

[@wildwoodtop]

You are welcome 👍

[@RobertBee-fs8hv]

That was as good a demonstrstion as i could expect to see . Clear and loud enough audio so i can watch the video and listen to it at the same time rather than holding the phone speaker to my ear . And you did the assembly twice for me

[@wildwoodtop]

You are welcome 👍 I was Oblivious drinking 🤟 JK 🤭🤫

[@RobertBee-fs8hv]

@@wildwoodtop you shine best when you are drunk

[@wildwoodtop]

😂 RobertBee 🤟

[@Jack_mkg]

I thought it was very difficult but thanks to you I have a strong motivation to do it Thank you ❤

[@wildwoodtop]

You are welcome 👍

[@augustterry3742]

Thank you so much for your video it really helped me. i have a Trike bike and I was catching hell on how to out the brake shoes back on!!!! 👍🏾👍🏾👍🏾👍🏾

[@wildwoodtop]

You are welcome 👍

[@gaborvaradi7946]

Thanks so much for this great video! Helped me a lot! You went through this with great clarity and helped clear the fog around the mysterious inner parts of the coaster brake! Assembly was successful, thanks again!

[@wildwoodtop]

You are welcome 👍

[@eldesgraciado6690]

Sir, you did an excellent job explaining this. Respect. Thank you.

[@wildwoodtop]

You are welcome 🙂 Thank You!

[@user-ne2bo4bb1z]

That helps me out a lot because my bike have problems with the back rim and front rim

[@wildwoodtop]

You are welcome 👍

[@spencerpaulsen9630]

Thank you for these videos, VERY helpful and entertaining.

[@wildwoodtop]

You are welcome 🙂 Thank you!

[@mzzmkb]

Best assembly video ever! Thank you so much.

[@wildwoodtop]

You are welcome 🙂 Thank you!

[@dravidramdass7033]

Thanks bro my coaster brakes was making a lot of noise. You really helped me a lot

[@wildwoodtop]

You are welcome 🙂 Thank you

[@scottberk4398]

Excellent video- this helps me a lot! Thanks

[@wildwoodtop]

You are welcome 🙂 Thank you!

[@daleevans45]

Great video, now I can fix my neighbors young girl'sbike. Thanks for a well-explained video!

[@wildwoodtop]

You are welcome 👍

[@CarbonSNK]

You are a good man. I should have watched this video before 😂

[@wildwoodtop]

You are welcome 👍

[@winstonweiss7972]

Thank you for the great content, your instruction was very easy to follow.

[@wildwoodtop]

You are welcome 🙂 Thank you

[@gogotrololo]

love it, this is a great tutorial!

[@wildwoodtop]

You are welcome 🙂 Thx!

[@bills6225]

thank you, well done and answered my re-assembly question

[@wildwoodtop]

You are welcome 👍

[@aklaunch]

Best one on youtube!

[@darkarchon78]

Awesome tutorial video, thanks!

[@wildwoodtop]

You are welcome 👍

[@S3f3ri0]

This video was great, but I did run into an issue - more than likely just my own personal problem and situation, but adding my two cents. The part where it came to inserting the brake pads.. and allowing “gravity to hold everything together” - this specific part was not a good time. I had tried numerous times to slip the brake pads “up” and inside but the second pad would get stuck and never fully insert, or the first pad would fall right out, or ball bearings would pop out… rinse and repeat, the same 3 issues. I ended up assembling separately the worm-gear/clutch/aligned the notches/held the pads on/together, then inserted it all as one unit, screwing only from the socket side, not the side where I held the unit together. It installed correctly the first time with this approach. I still could not have completed this with confidence without this video, thank you!

[@wildwoodtop]

Yeah those brake pads are the tricky part But in the end you had success! That's what matters

[@gintekonsta619]

Thank You so very much!

[@StanEby1]

Brilliant. Seriously. Thank you.

[@wildwoodtop]

You are welcome 👍

[@leonardparks7748]

Liked it!

[@Bunnysarefat]

Big help great video

[@wildwoodtop]

You are welcome 👍 Thx!

[@JustinJauod-mv1yc]

My man doing it right for us dummies

[@wildwoodtop]

You are welcome 🙂

[@gregrogers6088]

Great video, Thank you! My hub seems a little different just with the last dust cover/race either that or I am missing a part

[@wildwoodtop]

Thank you! 👍

[@grahamhammond]

Excellent thank you.

[@wildwoodtop]

You are welcome 👍

[@robertengland8769]

Might need to switch to a New Departure brake hub. They perform excellently. I swear by them. Sturmey Archer and Bendix just don't make much sense to me.

[@Siggy_Sour]

thanks dude u rock!

[@wildwoodtop]

Right on brother! You're welcome ✌

[@fluorescentlight522]

Thanks for this video man. The bike I'm restoring is completely rusted out and I'm nervous about taking the coaster brake out.

[@wildwoodtop]

You are welcome 🙂

[@lewisgoldberg5445]

Perfect

[@chrislcie]

thank you sir

[@wildwoodtop]

You are welcome 👍

[@user-mj9wo4hf8y]

Thank you

[@wildwoodtop]

You are welcome 🙂

[@Theworldaroundme143]

Every time I took apart a wheel like that I could never get it back together nd I'd throw it out 🤣.

[@wildwoodtop]

omg 😲 Same here! 😃 Younger version of me as a kid when it did not go back together right I threw a wrench across the garage 🤣

[@dravidramdass7033]

@@wildwoodtop Same

[@derekhobbs1102]

I tend to work on mine from drive side, and don't disturb the lever.

[@mindmap6710]

Great help, Great video. Thanks a lot. I was stuck when assembling.frustrated and mad and hit the bearing because it was not sitting properly and the bearing got bent. but now I know I can do it.ordered a new bearing. waiting for it to arrive. my worry is not assembling, my worry is the lock nut and cone got stuck together I even tried with a vice but failed to loosen the lock nut. is it because I soaked it in vinegar? I thought it will remove rust but it got stuck together like lock nut and cone nut is welded together. I might have to order new shaft but dont know how to order it. it is 6 inch long both side threaded shaft. dont know any of the technical names. thanks again.

[@Juos10kustu]

thanks !

[@wildwoodtop]

You are welcome 👍

[@albinneziri289]

Thanks

[@wildwoodtop]

You are welcome 👍

[@bondjovi4595]

I've been thinking about this one for my 68h hole rims. I want to remove the two brake pads and the arm. The only way to do this without slop is to hacksaw or Dremel the flange that the arm rests on. Then you can add an additional round hole washer to eliminate the slop. (I don't want risk scratching my bike frame. frame>thrift store rims.)

[@wildwoodtop]

Bon Jovi is Awesome 🤟

[@2930017]

Top THANX

[@wildwoodtop]

You are welcome 🙂

[@user-gd2gj8rx3l]

😅Thankz, Bro'4'tha'lil'Tutorail. Gott'ah Re'up. laterz.😄😮‍💨☺😉

[@wildwoodtop]

You are welcome 🤟✌

[@lemonsuper3062]

Hey, thanks for the video. Just wondering, if my bike is getting soft brake, is that means I need to replace something? Usually what do I need to replace if the brake isn't as strong as the day I bought it?

[@anthonyyacobozzi5405]

Excellent.. I'm still having problems.. Bearings are new, re-assembled and tested good. The coaster brake KICKS BACK when the brake is applied..?

[@wildwoodtop]

I'm assuming you have the brake arm attached / secured to the bike frame 🤔

[@TheVoiceSilnor]

Great video but I can't even get mine apart cuz the brake is bent and it's sooooo stuck. Any advice?

[@Slingersbullseye]

How far back should I place the rear wheel? Seems like the original sat towards the end of my frame, seems dangerous shouldn't it sit as far back as the frame allows it? Has an opening on the rear mount where the coaster attached now I can adjust them all being I'm (upgrading) the chain. just making sure so the chain isn't sagging or too tight, it's obviously a single speed also a beach cruiser.

[@wildwoodtop]

Perhaps / hopefully this video will help kzbin.info/www/bejne/jJukXmxvrJ51la8

[@Riddick_4506]

Can i ask what size larger caged bearing you used? It would help a ton! Thanks!

[@wildwoodtop]

Sorry I don't know the size 🥲 I didn't purchase a replacement 🙂

[@rtz549]

Is the brake function adjustable? I've had mine apart numerous times and the brake power seems weak or low. I've had BMX bikes that had more grab in the past. This is one doesn't have any bite and won't lock up the tire.

[@wildwoodtop]

The degree of breaking on this style is based on the amount of downward pressure placed on the pedal

[@rtz549]

@@wildwoodtop makes sense. This particular bike has short crank arms.

[@johngilmore3096]

What is the part called with the notches? If anyone in the comments can help me. Please and thank you

[@user-bk1qw8eq3l]

Great video, however I’m having a small issue. When I tighten up at the end it ends up pulling together the whole thing and then it’s so tight the wheel won’t spin. What am I doing wrong ?

[@wildwoodtop]

I'm not sure perhaps you have a different style (I'm assuming you're loosening it up 10:29

[@fuska9471]

when i removed the sprocket, there was lots of play by itself. What can I do to solve the problem before it goes back on the bike?? there is lots of side to side play but also up and down? thank you great video as well

[@wildwoodtop]

Shouldn't be any up and down play unless the bearing or bearing housing is worn. Side-to-side play can be tightened as seen here 10:41 Hope this helps 🙂

[@fuska9471]

@@wildwoodtop thanks for responding so quick appreciate it very much. The coaster was removed from ther axle and is still connected to the gear. Can i foward you a video on instagram to help me ? I would greatly appreciate it brother. Thanks God bless

[@Castro2169]

Got the same little bike for my girl, and That sprocket keeps getting lose. Like that black metal ring keeps popping off. And Throws off the sprocket and the chains get lose. Just got these terms from your video. Great video by the way. Brand new. Her first ride was Christmas Day. Less than 20 mins of ride

[@fuska9471]

@@Castro2169 if you just bought it maybe its got warranty. seems like a problem that shouldnt be happening for a new buy. I rebuilt the coaster setupon a bike i have recently. I had multiple bikes to pick parts from.take the sprocket assembly apart. there is a snap ring holding it together, and also a little space to keepthe pressure on the sprocket so there is no play. if its new it should include all parts but if you took it apart make sure you have all the parts and arent missing anything.

[@Castro2169]

@@fuska9471 Thank you! Appreciate your experience and expertise. I just bought a bunch of tools. Wish me luck. If not, I’m returning and exchanging it.

[@wanyonyirivaldo3334]

Incredible,,,,, but maybe just an inquiry,,, am I supposed to tighten the corn

[@wildwoodtop]

corn 🤔

[@gepardchester6495]

what grease to put to this part which is call ' breaking shoe ' ; I mean what kind ; for example some are not proper [grease] to put , join with aluminium [ I mean for example grease for brakes]

[@wildwoodtop]

Wheel bearing grease on the bearings and 30 wt. motor oil on the brake is is what's recommended

[@earlgarcia9824]

He did not show the go in for the kill part on the grease ,what he means is put a lot of grease , I use high temp grease especially if your flying like a bat out of hell downhill LOL🤣

[@wildwoodtop]

🤣✌🤣

[@chrislcie]

thank you sir

[@wildwoodtop]

You are welcome 👍