BIESSE AKRON 1440A SINGLE SIDE EDGEBANDER

BIESSE AKRON 1440A SINGLE SIDE EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + with "AIR FORCE" PUR & EVA (Hot Melt) Gluing Systems:
www.exfactory....
Specifications:
Latest Technology combines productivity, efficiency, and flexibility for all types of edgebanding material.
"AirForce" emits high temperature compressed air through a slot nozzle directly onto the reactive layer of laser banding. That layer is activated and bonds the banding to the panel fibers. This technology allows changes based on banding colors without any setup.
Environmentally friendly providing a “clean - green” technology that eliminates glue and fumes, which becomes timely & important. In addition, it features a conventional EVA (Hot Melt) Gluing System to cover the full range of edgebanding processes in use today!
Working Capacity:
Min. panel height: 10 mm; Max. panel height: 60 mm; Height of edgebanding material: 14 - 64 mm; Thickness of edgebanding material in rolls: 0.4 - 3 mm; Thickness of edgebanding in strips: 0.4 - 10 mm.
Min. panel protrusion from the track: 25 mm; Panel length: 140 - 3200 mm; Min. panel width (with length 140 mm): 85 mm; Min. panel width (with length 250 mm): 50 mm.
Multi-Feed speed 8-12-15 &18 MPM.
Glue & Pressure Section:
Infrared lamp IRL 700; Gluing unit Quickmelt QM 703 EVA melting glue. Special glue container for PU glue; Additional glue container for EVA gluing unit with melting device.
Additionally equipped with the AirForce "VC-710", High pressure, hot air system to reactivate special pre-coated edge material (commonly referred to as laser edge.
Automatic edge feed; Cutter knife; Pressure zone with 1-Drive & 2 pressure rollers.
Working Units:
Pre-milling unit with 2 x 0,8 kW, 12000 RPM motors, front/rear inclination 0° -15°.
RT 02; Gluing, edge feeding, and pressing unit VC-511.
End trimming unit with 2 x 0,8 kW, 12000 RPM, front/rear, inclination 0° -15°.
Fine trimming unit 2 × 0,6 kW, 12000 RPM top/bottom.
(2) Multifunction Corner Rounding unit, 0,65 kW each, for Corner Rounding, Straight Work pieces, Post and Soft-Forming 90° -180° degrees.
Edge scraper unit;
Glue scraper unit;
Buffing unit 2 × 0,37 kW motors.
Machine Features:
Belt pressure beam. The top presser comprises a rubber belt with a stain-proof coating. The thrust exercised on the panel is provided by springs housed on techno polymer connecting rods.
Auto adjustment of in feed fence.
Automatic track lubrication system with dynamic track absorption.
Manual infeed system for narrow pieces.
One coil automatic edge feeding.
Hybrid gluing head for granulated EVA and Polyurethane glue.
Pre-Melter TM10 for Polyurethane glue in cartridges. On-demand top-loading pre-melter for PUR glues.
Adaptive infra-red lamp to heat up the panel side before the glue application, in order to optimize the adhesion process.
Independent pneumatic exclusion of the top/bottom fine trimming unit.
Operator & Machine Control:
Biesse, Windows-based "SMART TOUCH" control & operating system.
Easy program management and usability. Rapid transition from one machining operation to the next. Modern, intuitive graphic interface.
Complete With:
Sliding unit for corner rounding unit, for the application of sliding liquid before the corner rounding unit.
Cleaning unit LPT02 to apply a cleaning liquid of the glued edge, giving a perfect polishing of the edge.
Actual Model is BIESSE AKRON 1440A