Big American V8 Power In A Cheap Porsche 911!!! | PART 5 - Making PowerKraut So Much Better!

We've been thrashing on PowerKraut for weeks now and it's finally time to get this thing working right~! The engine didn't fit under the decklid, it was leaking coolant from 10 different spots, and the wheels/tire package were pretty underwhelming. Watch Tony Angelo and the Stay Tuned crew work and fight this 996 Porsche until it finally finally turns into a proper street machine!
---------------------------------------------------------------
CHAPTERS:
0:00 - Intro
1:22 - Fabbed Intake Setup
9:14 - On the Quest for Heat!
19:37 - Moroso Oil Pan and Accumulator
27:03 - New Headlights!
30:17 - Fabbed Coolant Expansion Setup
35:57 - STEAKS
39:20 - More Leaks…
51:25 - Buttoned Up, Moment of Truth!
55:15 - Fresh Apex Wheels and Falkens
57:42 - HIT THE STREETS!
----------------------------------------------------------------
GRAB THE NEW STAY TUNED SHIRTS AND GEAR: tangeloracing.myshopify.com/
BUY US A PIZZA HERE!: www.paypal.com/donate/?hosted...
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Russo: / thakingofhearts
Zach: / therealslimzimmy
Mike Kunz: / mikeslim
Tunes by The Subtastics: subtastics.bandcamp.com/
----------------------------------------------------------------
MY PARTNERS:
Holley: holley-team.com/3pYxhl5
Summit Racing: www.summitracing.com/
R&D Exotics - Porsche Parts Dismantler: / thosepartsguys
Chavis Performance Engineering: www.chavisperformanceengineer...
APEX Wheels - apexwheels.com/
Falken Tires - www.falkentire.com/
Dorman Products: www.dormanproducts.com/
Wirecare: www.wirecare.com/
Boxo: www.boxousa.com/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!

[@TerminusVox]

I'm so happy to see all these "little" details being finished up! While I appreciate the 'get-er-done' videos I love that you're going back in to make this car an all-season driver.

[@chrisgramza8582]

40:17.... I haven't laughed so hard in a while, at the string of beeps... hilarious You guys are awesome. Happy new year to the Stay Tuned Team and their families. See you in 2024!

[@cjh4l22]

46:08 "and I swear to god if it leaks one more time I'm gonna convert that thing to air cooled. watch me"

[@EmDub215]

I chuckled hard at that part of the video.

[@DaJuiceBox35]

OMG…..me too. That was hilarious.

[@Mr_kay240]

been there swore at that... hilarious!

[@tooltimenova]

The roller coaster of emotions this car brings. I can feel the pain when the rear coolant lines started leaking and Tony melted down. Keep up the great work and please keep the vids coming.

[@PatandDoopypoopy]

Stay tuned crew and Families. Have a great new years. Health and wellness for you and yours. Viewers/followers - ditto. EDIT- looking at those water lines. I'm thinking the designer/engineer drank way way way to much warm dark beer. Just an fyi - when you were carrying the new lines, it looked like a sci-fy megablaster death ray cannon master blaster 2000. (Patent pending as of right now). I see a shirt. I do. Lol

[@StayTunedTA]

Appreciate it! Best wishes to you and all the gang!

[@bobroberts2371]

said "looking at those water lines. I'm thinking the designer/engineer drank way way way to much warm dark beer. " And you can do a better job? With limited space there are only so many empty spaces

[@PatandDoopypoopy]

@bobroberts2371 I absolutely cannot do better. Even with my German heritage. So yes the factory did better than I ever would of. (Maybe use better material or a inner treatment?)

[@Snugglez187]

I absolutely love this content. Real people doing real projects in a real garage. None of the other car channels have this.

[@bat5917]

Tony, you are an inspiration! This build is not only amazing, it was a royal pain in the ass. You and your team stayed with it, somehow, and got it done. I’m an old man doing cam and heads on my C5 and some of it has been frustrating, but your show of determination has picked me up! Thanks, big fan 👍

[@wizardofhyd]

Tony, that Porsche is turning out awesome, you make us PA boys proud to see the work you and your team puts down! I can’t wait to see you turn up the wick and send it on the track!

[@layzboy2545]

Man, I was worried. 🤣🤣 Thought you lost the Shop. Wouldn’t be a Friday without Tony and the boys. HellYeah. Beer and a Slice Time. Ready to Stay Tuned. Happy New Year!!

[@adrianhughes2163]

Great project to watch, and I really think it showcased the great skills you and your team have as it looked like a tough build. It was also really great to see you took time to polish it up, rather than the 'quick and dirty' approach as this car is too good for that I think. Also thanks for the videos this year, I am sure a great deal of hard work and late nights go into these builds that as the viewer we maybe don't always appreciate... Happy New Year in advance to you and the team. Best regards.

[@user-gk6kh3pc2h]

I want to be like Tony Angelo when I grow up

[@ThePete2432]

This project is realistic and I love it. The last 10/15 percent of my projects takes longer than the first 85/90 percent of the project. I like swapping engines… but then I break everything every time.

[@bowlkiller1975]

"If you guys can't jam those heater hoses up here WE'RE GOING TO HAVE TO SELL THE SHOP!!!" Apex wheels are the best in the business! I put 140,000 miles on a set with my 2016 Camaro SS before I had to sell it because I've gotten sick and am disabled now... and homeless and living in my Subaru for the past 3 years. These video's really help give me a distraction from the fibromyalgia and severe depression. THANK YOU

[@StayTunedTA]

YES, basically.

[@SNAKERADIOS]

I never saw anyone else remote the throttle body. I knew it could be done but never seen one on an LS manifold situation, Great solution. Love this build sounds like it rips for sure. Ok IF everyone that watches subscribed he Could be over 250k subs. Lets get it done guys and gals. They deserve it and it`s very important for tony and his family!! Thanks guys.

[@MH-rb7lp]

Awesome work, almost makes me want to buy a Porsche... Having your own mil and lathe is absolutely awesome even if you are not a full on machinist, you can make/fix things you couldn't before. I love my Bridgeport and Southbend.

[@GreggeSB]

Finally! The "magic incantations" that make every car repair/build complete. If it doesn't make you cuss, you don't care enough about the vehicle. Learned those magic words at a very young age, and the proper application of them which seem make things come together eventually. I've been waiting for that long string of bleeps that lets me know you care, lol.

[@kc360awareness]

That’s a lot like the Apollo 911 from Hoovies Garage fame …. and of course The Car Wizard. Awesome build. Power Crout. Clever.

[@bendummer8084]

That does sound gorgeous! Lots of love for all of Zuffenhausen's finest!

[@StayTunedTA]

Thanks! It's got a little high RPM howl that suits the car very well.

[@PatandDoopypoopy]

​@@StayTunedTA that exhaust has pushed me to ditch the H pipe and flows and get xpipe and borlas

[@SupermotoCentral]

I liked how the sweater matched the coolant, also great choice of wheels and glad you went back to 18 inch size which is the best for the 996

[@rabidcoyote97]

It took way too long to have an expletive laced rant! There’s no way you can work on all these projects and not lose it! Probably my favorite episode ever! Keep up the good f****** work!

[@StayTunedTA]

HAHA, when I promise to get a car out on the road, I mean it! And that last disaster on a friday when we were going to take the next week "off" really got me!

[@A-Dub68]

Not knocking the other guys (or girl) on HRG or Roadkill, but Tony's builds are better than most of anything turned out by both shows combined in his absence! So glad that this channel exists!

[@lucyh9559]

Wow! this might be one of the best ST episodes to date. I feel equally as much love for everyone on the show, and it feels like they all, rotating guests included, are having more fun and camera time. The energy is unmatched. I also felt that sickening deja vu watching you fab the custom aluminum lines for the LS again. What a mess this episode was, incredible stuff Get that sht done Tony!

[@juiceda6]

I love watching you guys work on this Porsche. I want this same setup. Best of both worlds

[@ArthurSperotto]

Duuude it looks mad beautiful now! Perfect daily right there.

[@MrCecilbag]

The agony of those lines was real. Great build and those wheels are perfect.

[@maddie33990]

Cool upload, please keep them flowing! ❤️

[@dakotadennett6979]

This channel never fails to amaze! I hope you had a merry Christmas! Keep it safe and God bless!

[@namtech425]

Oh wow guys that cooling system is fighting you all the way. Good job on this thing guys.

[@TVtwarn]

You can tell if someone likes old cars - Zim giving that chassis rail a couple of old’good boi’ pats… says it all

[@benjaminmergele333]

Jesus the amount of patience im sure this episode took from you had to be insane. I know a lot of guys who would’ve thrown a fit and given up for months after that second leak. Way to see it through! Car’s a ripper!

[@AdventuringwiththeS.G.O.C.C]

Happy safe new year to you & the crew Tony.

[@StayTunedTA]

Happy new year! Thanks for watching!

[@donparker1823]

The oil accumulator idea is fascinating. The old Hawk surface to air missile control surfaces worked on the same principle. That is there was a steel tank half of which that had an inner rubber bladder with hydraulic fluid in it and the other half was highly pressurized air. When the missile launched the air pressure was released into the vessel and the bladder would force fluid into the control surface actuators and the guidance system would work from there. Nice job on the headlights.

[@smartintan]

It's got such a cool sounding exhaust, not too loud to be annoying, just a sound that says performance.

[@QSnoki]

So much respect for you guys taking the engine out after it leaked again. I would have set the car on fire, press it into a box shape and send it back to Germany. Love from the Netherlands!

[@79tazman]

That Bridgeport is awesome it's a must have in a shop and there are so many things you can do with it too. The older the machine the better they re in my opinion and the longer they last.

[@WiringRescue]

PERSEVERANCE! 😂 I wasn’t sure if you were gonna lose the shop or not. Nice work my dudes!

[@jasonbirch1182]

A little tip on the coolant tank. If you run a small auxiliary pump in the line down to the bottom rad hose it will constantly push coolant back into the system and pull the air/steam off the top. You can find them in the heating system of 80s and 90s Mercedes for certain but im sure theyre inntons of stuff. Its used to help circulation to the heater in factory form.

[@brian_sipe]

40:17 Just putting this here as a reminder of when I was a kid and helped my dad change the starter on our 1984 Monte Carlo. Ah memories...

[@lll9416]

This is what makes Tony a top creator this is been broken up into 5 parts but every single part had a vision, an accomplishment of the mission and then a ride at the end! Ffs, I can no longer watch people breaking up a simple thirty minute video into ten freaking parts. Thanx T-man!

[@hydrocarbon8272]

Woke up from a nap (long week), 1st thought was: Friday evening = new Stay Tuned episode! Looks like you're using the same idea I posted on one of the earlier vids, gooseneck the throttle body off to the side.

[@StayTunedTA]

NICE! We were a bit late but we're here!

[@johnbaldwin6585]

Hey y'all, Saint John from R&D exotics here. Glad they we could be of assistance to get this beast on the road, ripping. Hey Zach, aren't you glad you took ALL the pipes? Nice job on the headlights 👍 HAHA! Can't wait to see this badass piece of machinery in person. Be Safe! Later ...

[@HandDriven]

I love the fact all as you mentioned there was a clutch issue, the new guy imediately asked if wanted it taken out 💪🏽 awesome video boys!

[@bobbycuesroadhouse2204]

I’ve had great success with polishing the headlights vs the cost of replacing them, Great content with the variety of the builds, !

[@petelattimer6808]

this show exactly why you should ALWAYS use anti-freeze in your cooling system, AND change it periodically, whether you NEED anti-freeze or NOT

[@anthonypaules7893]

Put a cam and a set of aluminum heads on my 454. Fired her up and had a coolant drip from the back of the head gasket. I almost cried, then I laughed and pulled the pig back out and fixed it. Life of a mechanic.

[@johncarella1836]

Love the Car!!! Tiny suggestion the Sticker on side got to go and Got to get lowered!!! Maybe a crazy wrap!

[@looneylonzo28]

when you can’t afford to outright buy the good toys guys like us can build them. I know you were kicking yourself in the ass for not doing those coolant lines the first time that was a whole Lotta bleeps. Have a happy new year.

[@StayTunedTA]

HAHA I was NOT thrilled. I also was up until 3AM making sure we got this thing down the road today for the video! Happy New Year!

[@chadwickciampo3634]

Tony and his crew Rock! Feel like they are my spirit animal...if thats a thing.

[@revolutioniscoming]

I'm hunting me down a Marlboro Cyclone they made only 10 . Well Marlboro had them built from the factory as give aways.. has anyone else heard of them.. killer episode as always, thanks tony and crew for putting out yet another great vlog..

[@StayTunedTA]

Good luck! I have seen only one for sale. It think Mclaren/ASC did them, they are sickkkkk!

[@BillyJoeJimBob28]

Well, you could just clone one like our Man Tony did! 😎👍

[@brianlafollette7530]

This one looks like how my projects are going

[@vwbyoy88]

FINALLY Tony went off!! I SO FELT THAT!! Working on cars can be so rewarding and insanely frustrating.

[@alovero2]

the sound of the hand pump for the cooling system pressure test brought back memories. First generation porsche water cooling glued in coolant pipes. You guys are living the 996 dream! God speed, its a great analog and simple car!!!

[@johnhoward5367]

I really needed that long string of beeps it killed me. Finally I have something aside from debt I share with youtube car guys

[@crottemole]

I really felt that long bleep moment. Encapsulate perfectly what working on an old neglected pos feels like 🥰. Having to redo the same job twice because; "nah, they'll be fine"

[@stokerdon1020]

Some conversions fight you every inch of the way. Glad you stuck with it and got it all fixed. I can't believe you had to replace every piece of coolant pipe in the car, that's crazy! Looking forward to the tuning and finishing touches!

[@AutoAppraisalGuy]

Come eat, come on. - Tony with a Steak That hit. These guys are so awesome. Love that Tony has fostered this awesome community, just too cool, wish we had something like that here!

[@StayTunedTA]

Thanks! Appreciate the support!

[@AutoAppraisalGuy]

@@StayTunedTA absolutely 💯 you guys are bomb! Keep it up and hopefully we'll make it to sick week this year!

[@sporty196071]

You and your crew got it going on!! You guys really hook stuff up, and I'm learning new stuff

[@tomisamish]

Listening to tony curse like Ralphie's dad from a Christmas story makes this the best Christmas KZbin video

[@timtompkins150]

Fantastic show. I truly hate for it to be over. I enjoy all of it. I really feel like part of the team. Thank you

[@Terrycrackcorn]

Cool new Bridgeport! Right on!

[@patrickfeuillet6878]

Fantastic project, thanks Tony😀

[@shaunelder8950]

You all da bomb Tony (and crew)! You all inspire me to get projects on the road, fight through the pain...and coolant leaks.

[@davidmcnett2602]

Sick, sick, sick. Love this build and channel!!

[@jameskellison9342]

Yay! Killing it per usual! Love the creativity! The Kraut looks and sounds mean!

[@StayTunedTA]

Appreciate that big time!

[@mspellman562]

Got to say, happy to see that even you guys have random issues that pop up. I have had countless projects that get derailed bc of bs issues… I thought it was me being a rookie…

[@user-xm2ew1lg8w]

I look forward to seeing your post every Friday. The Powerkraut is an awesome build! You do awesome work!

[@talontsi92]

Note to self, If I am ever LS Swapping a 99 Porsche Carrera, replace all coolant pipes. Thanks for doing all the hard work for us Tony.

[@usjosharmy]

Love the fresh content guys! Much appreciated

[@alanthompson7777]

Love what you guys do, Nice work , thanks for entertaining us with uploads it's much appreciated.

[@StayTunedTA]

Thanks! Appreciate it!

[@cliqboom1088]

That is the Porsche needed for the American market 👍👍...Want to drive it badly, great job guys

[@andrewhigdon8346]

The prolonged bleeps at the discovery of the “new” leak had me cracking up while also feeling for your frustration. Goes to show you how when the automaker specs certain things, sometimes it’s because they know what they are doing. Now about that 90% water I’ve got in my Burban. Damn. Time for a flush. Chemistry is a mofo.

[@tonypozzini4724]

I feel your pain Tony! Chasing down those coolant leaks was a LOT of work! To hopefully ease your pain I ordered one of your cool Stay Tuned Richardson trucker hats! Keep on rocking the great content and May you and your guys and your families have a Happy and prosperous New Year!

[@RoninDosho]

THAT, was incredibly satisfying to watch. Thanks.

[@StayTunedTA]

Glad you enjoyed it! Appreciate it.

[@kellyj1464]

Love seeing this build, can't wait to see how it does on the track! Please do a 1/4 mile soon!

[@josephkelly4893]

Wheels and tyres make the build, love the extra sidewall, looks like an old school ripper!!! Tony you nailed it again brother

[@JC-gy4xs]

Best episode yet! The team is incredible and the content is on point!

[@stefantrnacek1394]

Of all the vehicles you have done, this is by far my favourite one. It's just awesome, and that sound ❤.

[@user-cb3ti8qt1w]

Nice work you guys. Love all that big sound and power from that little car.

[@joeboonen7421]

Compliments of the season Tony and crew! Love your content and personalities That Porsche is awesome.

[@davidcombs8458]

Oh yeah! More Powerkraut! Let’s go!!

[@StayTunedTA]

Let"s GO bud!

[@davidcombs8458]

@@StayTunedTAWheel payoff worth the wait! Those are sick!

[@georgebrown7557]

Congrats you got the best of both worlds there all that hard work paid off 👍 Killer ride Keep those videos rolling

[@charleshuffman6982]

Entertaining and interesting too. Thanks for publishing your trails with German engineering. I run a set of Falken Azenis RT660's for autocrossing currently. Ran a set of Falken's over 10 years ago on my '98 Expresso Coupe for autocrossing then the original BFG RIvals and then RE-71R's until the Neon went past 216,000 miles and I gave it to my nephew (which he still drives) and bought a WRX to replace the Neon. Steak and asparagus - good pairing!

[@Seelingfahne]

Hope the show keeps growing, always liked that we see the whole process and hilarious setbacks. Its kinda cursed as far as swaps go, meaning more entertainment for us 😂

[@ericvaught2111]

I thought I heard some air flow noise during the vacuum process and that beautiful vocabulary after the leak was all the validation anyone could ever ask for.

[@GerardBendotti]

that giggle when you floored it 😂

[@jasontaylor8296]

Great job man. Looks like a lot of fun!

[@alwood2270]

Can’t wait to see this thing on the Dyno and then the track. Awesome build on an awesome car!

[@bgee461]

Nice job gentlemen!! You guys do great work together. Happy new year!

[@ShaunHensley]

“We’re gonna do what?”😂 2:46

[@paulmarglin6286]

love the extended beep session

[@jamesmiles1456]

Looking good! Sounds better!

[@DavidTYork]

Superb build - look forward to more.

[@jamieweirdworld]

Thanks, Tony and Stay Tuned Team. Great episode.

[@user-pb3wm3dq7t]

Crazy hearing it sound like, love it

[@RexCars1]

EXCELLENT.. Great Build.. Well Done TA..

[@samuelcookphippen]

Hell Yeah! Awesomeness!

[@GiancarloFloyd]

It’s cool to see this project come together I worked for a Porsche shop and a guy brought pretty much the same project in but he ran out of money and we never got to finish it. It’s cool to see one driving around finally.

[@mlivshiz]

Awesome car. Can’t wait to see more of it. Love this channel.

[@rexcramer65]

Thanks for the effort from you and the fellas. Congrats on 12/29 upload!

[@jasonaldenhaley1]

Damn Tony, looks RAD A.F.!! I bet Fahrvergnugen becomes Nearvergnugen REAL quick!!!

[@carywhozawhastit2024]

He who makes the best stuff wins!