Big doin’s in the JMR shop

[@rockabilly46]

Jordie, Great videos. You remind me a little of the old days. There weren’t all of those fancy garages and shops. You’re definitely doing it Old School. You should be proud of making things work with limited resources. If I could make a suggestion, there are some racers who might want to have viewers sponsor them thru an Amazon list with parts you might need. I for one helped a little with a racer and Father team in Alabama. They listed some parts they need and viewers purchased and had Amazon deliver to their address which was hidden. Worked out great. I sent them a crank and an Intake manifold. We all want to see you succeed, and I think everyone knows how expensive it is to field a race car today. Again, just a suggestion.

[@SwampWaterInfusions]

Congrats on the new motor. Awesome to see the little guys get some big help.

[@MICMARKMAC]

Hey Jordon get yourself a bag of citric acid crystals. Stuff like rusty hubs. Strip it down, mix up a bucket of hot tap water. 1/2 to a quart of the crystals. Then soak the hub over night. With a rinse off and a green scotch bright they are good enough to paint the centre parts.

[@hollywoodwest9473]

Safety glasses, my friend.. Especially when using the wire brushes on the drill.. I want to see you driving into the winners circle! Keep up the good work!!!

[@markschultheis5931]

Good to see ya Jordan. Keep digging. 👍

[@mjay8128]

You amazed when you worked with HTF. BUT your race car knowledge is just brillint !!!

[@dbsnyder4503]

Another great video Jordan! Already looking forward to the next one! Nice to see you have some sponsors to help you out. You deserve it! This is grassroots racing at it's finest. Best of luck to you young man.

[@joejohnson7097]

I'm glad you are getting some sponsors and help. Thanks for the video and updates.

[@danielweiss144]

I appreciate you thanking us for our time, cause that is the only thing in this world we are in control of. I enjoy watching you cause you are very very smart when it comes to cars, and as your sharing your journey your being so humble. So Thank You for your Time.

[@IsaacandPapa]

You're doing a hell of a job young man! Thanks for the content and keep digging bud!

[@dennyaustin1602]

Thanks for this and all your videos man. We really enjoy them all. Wishing you good luck next time you race. Your awesome and deserve a lot credit for the effort you put into your equipment. Keep it up Jordan and you will be in victory circle in no time. Can't wait to see that happen looking forward to your next videos. Go get them checkers you can do it!

[@mikejohn4155]

Keep on working hard. You have people ready to support you. Your videos are getting better Jordan. Keep up the good work.

[@kevinritchie9227]

Glad to hear you have people who are wanting to help you! Congrats on the monetization!

[@rhodie33]

Stand on it Jordan. Thank you, Mr. Andre.

[@dalejohnson9624]

Doing a hell of a job coming from top notch shop. Do what you got to work with now keeps you humble. Not that you need that cuz you're already pretty humble but keep up the good work

[@bretbarnes2224]

Thanks for your hard work. Gonna be fun to see you on the track.

[@user-lk8yh7bu5o]

GLAD TO SEE YOU ON VIDEO AGAIN JORDON.JOYNORS AND YOU STILL CONNECT? YOU WERE AN ASSET TO THERE TEAM.KEP ON TRUCKN JORDEN. WAYNE MILLSBORO, DE.

[@jb2288]

Great job Jordan keep up the good work... My dad worked under a clear plastic sheet draped over the car for years.

[@bryanslittlegarage5724]

Much love son tough seeing you work on your car in your make shift garage but hey you are doing it and making it work. Much love and good luck ❤❤❤

[@CORNDODGER]

LOL do you really know what the term SHADE TREE MECH comes from HES got a ROOF we crawled around in the STICKERS doing this shit in the 60s

[@bryanslittlegarage5724]

@@CORNDODGER yes sir I still have to do it and it sucks

[@ThebadMAN747]

Jordan please move that right rear chain farther towards center. It will cause wheel hop and also stops the rear ends movement. Stops it from moving left when up on J-bar.. Unless it's set a 2 inches of free play at ride height you might be ok.

[@Gary453]

Nice to see you doing it the way we did it back in the day, I hear you are originally from Pa. Me too I'm in Alabama now 15 minutes from East Alabama motor speedway any chance of coming here to race? I hear they are going to have modified racing next on a couple of occasions?

[@carlandrews6179]

Good luck to you Jordie.

[@scottyd5179]

Keep it up Jordan!

[@rickjones6798]

Yeah the copper works really good for header gaskets I use that stuff don't have to worried about messing with regular gaskets keep up the good work Buddy

[@dougs2742]

Keep digging man!

[@feliciahowell3424]

Good luck to u enjoy ur videos

[@kingsalmon5905]

Keep on keeping on!

[@kingsalmon5905]

One thing Jordan, please interact with your fans here on KZbin. I think that will help you gain more fans. I follow HTF and never see any response from them to their fans. Just nice to be noticed. Thank you.

[@johnapgar7860]

Your the man jordie

[@user-if9ti8ec9k]

Great video I raced asphalt in maine in the1980 back then pro stocks slicks were 125 each you get help from friends family to make it week to week

[@johnhale9892]

Miss seeing you, Jordy. Now I can find you each and every time you drop a video.

[@ScottCzerwinski]

Thank you for keep posting Mr. Miller you are a very intelligent young man wish I was down there to cheer for you do you have merch yet?

[@jasonritchie3238]

Awesome job Jordan

[@garryballentine9151]

Great one man race team!

[@williamcarr8543]

Jorden doing it correctly will pay off for sure at the track.

[@redeyedmongoose2963]

Come on guys if you’re watching this and you like it just push the subscribe button you can help Jordy a lot?

[@vanditravelsnomad9198]

Good Luck Jordon 🏁

[@harryeldridge7895]

Good luck and " Git'er done !!

[@baims8367]

Get u a IMCA HOBBY STOCK and go have some fun !! These cars ain’t worth the headache 🤯🤦🏼

[@ralphwatten2426]

Looks like you need a "Boy Friday" to hold a wrench or turn a bolt or hold a header. My brother was 5 years younger than me so that's what he did. He became a heavy equipment mechanic and electrician. I hope you can get in a real garage soon.

[@daniellueken7820]

👍

[@crouse69]

Get some adhesive remover that they use in paint and body shops.. it will clean all that right off.

[@danielpinne8282]

Hang in there your doing great

[@jeffreymerhar4127]

Motor deal sounds good

[@travisp3725]

What is the new powerplant coming?? Who built it

[@greghall3396]

Go Jordan!!

[@jasonlong3929]

Gl my brother go gettem

[@chrismozingo7674]

Are you still helping the HTF guys?

[@jasondobb4849]

nope

[@CORNDODGER]

WHY HTF Pushed him to the CURB cuz he needed to make a LIVING

[@stephenpierce4804]

You learn to drive yet Son

[@larrycadwallader499]

Good for you Jordan.

[@CORNDODGER]

Got some TED WANG DANG SWEET POONTANG on but hell its all the same