Big Sends at Snetterton Test Day

NORFOLKING ABOUT TEES --- www.dannydc2.com
After a mostly successful race day at Snetterton last week with the BRSCC we return for another weekend of fun this time with the 750mc
The weekend will be split in to 3 videos, this is the first.
Consider supporting the channel by becoming a member on KZbin, or joining my Patreon. You can also buy a T shirt, or a hoody, or if you just want more por gratis, you can check out the Discord server or Spotify playlist below.
Join My Patreon: / dannydc2
Buy Merch: www.dannydc2.com
Discord Server: / discord
Spotify Garage Playlist: open.spotify.c...
Second channel: / @dc2plus

[@dannyDC2]

When Snetterton went from that big scary place to my first pole position NORFOLKING ABOUT T SHIRTS www.dannydc2.com/ next vid is wild Stay tuned 😎

[@stuartwilliams5548]

Who doesn’t get excited when a DDC2 notification pops up. Love the direction this channel has taken. Even the garage videos. Thank you for creating awesome content for us mere mortals. 🚗💨

[@2guysracing252]

Could try putting a straw from an aerosol can under the small end of the CV boot, helps vent them when they get hot. Doubt that's your issue but it can't hurt and does prolong their life

[@dannyDC2]

I had that before but had to remove cos it was leaking

[@2guysracing252]

@@dannyDC2 ahh rats. Must be cause ya driving faster than me

[@DataC0llect0r]

@@dannyDC2 you could try a bit of string too. Some guys at the Nurburgring do that too.

[@TomoHawKzZ]

All these Forever Young edits are gonna put me back into my eurobeat phase

[@TheTechnoaddict]

How this car is still alive amazes me every time😅

[@dannyDC2]

not for long!

[@harleycottrell802]

Yes!!! Been waiting all day for this, cold beer in hand norfolking about this Sunday 👌

[@duncanajpv8]

Another great video. The significant improvement in pace, the excellent use of data, the MR2 always at/beyond the limits of adhesion - love it.

[@brettgump]

Loving the Nofolking around series 👍just ordered a T shirt, look forward to the next video 👍👍👍

[@dannyDC2]

nice one

[@jdm_john8240]

On my k20 ek9 I had a CV boot leak small amounts constantly, it was in good nick and I tried new clips as tight as they would go but it never fixed the issue. In the end a new genuine EP3 inner boot kit and some fresh grease fixed the issue Not sure if it was an issue of the old grease breaking down and being able to escape or maybe just tired rubber even though the old boot looked good

[@jdm_john8240]

Anyway keep it up, these race videos are a class watch, even the misses enjoys watching them!

[@ModFix]

Cracking video bud 👍 Hopefully set you up for an awesome qualifying session 😁👍

[@samuelgarrod8327]

Great stuff. Banging tune on the intro too. Top notch 👏

[@tybgycfmb8697]

Gotta give you some props for the garage playlist on spotty! Mint taste bruv, also loved the video as ever... keep up the good work amigo

[@dannyDC2]

Cheers man need to update that tbh

[@IainLead]

Great content as always. T1 looks a pretty epic corner, big kahunas required! Looking forward to the racings vid 😃

[@dannyDC2]

Yeah it’s tough

[@emmanuelaversa5555]

Can't wait for the next video! Interesting the BMC filter test, i once tried an "aliexpress special maf Adapter" paired with a "Amazon Racing BMC CDA replica" ducted directly from the side vent. Car was going shite in the high rev zone (Mid range was good, definetly more responsive but LTFT were above +10%, intake temp very cool but it was winter so it doesent count much ). I also used a 3d printed 2zz replica maf adapter but didn't work neither. I really don't understand how you and other mr2 championship partecipants are able to make it work 🥲

[@dannyDC2]

You need to be careful with the MAF, keep an eye on the AFR when you make changes

[@ewanturner4381]

@3:27 is that a dark grey Transit I spy in the background? 😉

[@eugenekim87]

The European beat hath intensified on this day

[@mrbakerr1]

My money would be on the drive shaft boot catching on something to bork two of them so quickly

[@dannyDC2]

just coincidence I reckon and old shitters

[@samuelgarrod8327]

Great stuff. Banging tunes too. Top notch 👏

[@maxmoughal5183]

Looking forward to seeing the race 👍🏽

[@peterh1386]

Know this is going to be a banger!

[@Bradp72]

have you tried putting a little breather tube venting the boot at the small end... i use like a pressure can nozzle extension, it lets the boot breathe and stops pressurization

[@dannyDC2]

Yeah doesn’t work on mr2 cos if the tripod design I know why it’s happened now it’s nothing serious

[@martinc8532]

First corner at Snetterton is big boy pants time, I see you use the same line as me with the double apex and occasionally onto the grass. Also changing down through the gears under the bridge into Brundle and Nelson seems to work better, I used to block shift from 5th to 3rd and it always made the car feel unstable. Occasionally I'll go into Brundle in 4th, touch the kerb, straighten the wheel then down into 3rd for Nelson. It's an odd line into the corner and I've never been 100% happy with it.

[@dannyDC2]

I wasn't double apexing, I could never get comfortable going for the first one

[@quicknickdriver8510]

Now then Dan, the Goodwood slide was a peach. You certainly have the measure of mr2’s handling…👌🏻 Disrespected tyres!

[@weaselman24]

MR2 showing that lift off oversteer is as strong as ever.

[@MitchDenham]

Quality media content as per usual 💪 - also it’s sick seeing my name in the list now 😂

[@dannyDC2]

Yeh boi

[@Soulvex]

Car looks good, less skipping about on those nasty corner exits.

[@ganners09]

29:30 Fuuck that might have solved a problem for me. I've destroyed two inner bearings in about 10 KM worth of racing, I thought that they'd be fine sitting in the gear oil but maybe I should have grease on them as well?!

[@dondelchulia3189]

Lol I think the car is asking for a little more rear grip

[@dannyDC2]

Yes the balance is off but that’s how we have them for the championship

[@MKT_19]

On point editing, deffo improving with it 👌What's the song in the intro?

[@dannyDC2]

good question

[@MKT_19]

@@dannyDC2 🙃

[@headleshydra]

The liftoff oversteer @ 9:18

[@dannyDC2]

That’s brakes, I forgot to put pedal cam

[@headleshydra]

@@dannyDC2 (Correct me if I'm wrong, as I'm learning!) You lifted off accelerator to brake mid corner, isn't that the definition of snap-oversteer 😁 You caught it very well either way, epic clip!

[@headleshydra]

e.g: 9:55 you stay on throttle and back end gets back in line

[@headleshydra]

11:25 again - brake on the bend!

[@headleshydra]

18:54 same again....Am I just stating the obvious though? Feels like it at this point - apologies! haha

[@BigAuf_]

DRIVE FAST

[@ChrisBeevor0511]

F1, BTCC and DannyDC2 Norfolking about, all in one day? Pinch me im dreaming!

[@WHO-ze5vn]

been waiting ages for this, Keep up the good content man

[@dannyDC2]

Yeah these are taking a while to assemble but worth it

[@steventhomson7531]

Trailers make the best paddock work benches.

[@threepotMR2]

Been thinking about bolting a vice on the draw bar end somewhere.

[@walkthroughguru]

aye up

[@dannyDC2]

Ye

[@timocallaghan4408]

15:35 why not look at the maf values? That should give you a clear answer on the air filter Would be curious what you do about brake fade, especially on these longer sessions with standard calipers.. Do you not end up with no brakes?

[@dannyDC2]

MAF values, what do you think that is? Brakes are fine. I don't really go fast enough to trouble them. Just need good pads and fluid

[@timocallaghan4408]

@@dannyDC2 I thought with maf values you could see what the throttle body sees.

[@AmirPomen]

Like i said earlier... Just use good brand name 4k dashcam instead of gopro for onboard camera.... Saves the gopro for outside recording.. Cheers 🍻

[@dannyDC2]

No chance, the quality isn’t there. I will use 2x GoPros

[@riskyb100]

Share his videos they deserve more attention

[@dannyDC2]

indeed

[@zezrem6238]

What about a direct cold air feed from the “bonnet” for the filter?

[@dannyDC2]

sounds illegal

[@zezrem6238]

@@dannyDC2 ah right, sorry I’m not too clued up on the regs for racing.

[@mariogocars]

It is like Christmas, every week. Dan, i wanted to ask you a question: Thanks to you Im planning on getting my first racing car project started. Im really into an 190E's, knowing this, what would be the first things I'll need to do? Thanks for you time, Mario

[@dannyDC2]

Bushes bushes and bushes

[@muzzrmuzzracing2394]

Can you do a roof scoop air intake

[@dannyDC2]

no

[@abc123732]

Just started watching this, but how's the screen been so far with the Scruts ? mines slowly resembling yours

[@dannyDC2]

bad

[@saketh546]

Bangers🥵

[@FItAndU]

Ey Dan, do you think the driftings helped you become a better driver on track? Owned a few Clio sports, just downgraded to an e46 330i, still not confident in the rwd holding grip like the 200 or 220 I’ve owned. You think a drift day or few would help me learn this?

[@dannyDC2]

of course

[@jangr3813]

Wait downgraded 😂? Driftday's, and going over the limit where you have space will be needed. Begin with low speeds and build it up. So just practice.

[@thestig886]

Is it just me or does the tire squeal at points does sound exactly like it does in GranTurismo 1? That would mean all the complaints about the sound of GT1 would be obsolete 😅

[@dannyDC2]

Toyo spec

[@JamesSalvation]

What happened next? 🤣

[@yungnelson2oo1]

how does 3 sessions equate to £270?

[@dannyDC2]

It was 360 for the day, 4 session

[@yungnelson2oo1]

@@dannyDC2 fook me didnt realise it was that steep

[@xRichUKx]

Powered by Super EuroBeat

[@feyergaetan]

What bracing do you have on your mr2 ?

[@dannyDC2]

Stock facelift

[@feyergaetan]

@@dannyDC2Amazing , and sway bars ?

[@laserracer6]

Put a snorkel on it....Get as much cold clean air as you want then..could even make one out of PVC pipe

[@dannyDC2]

Illegal

[@oscarzt1652]

judging by the intro, i reckon your rear tyres got a bit hot

[@dannyDC2]

maybe

[@jonwebb9261]

Initial D-an

[@dannyDC2]

interesting

[@ralphmillais5237]

Shouldn't you be trying to avoid all that sliding?

[@dannyDC2]

Of course

[@RHBTurbochargers]

She's just a little loose

[@p55edy]

When that gearbox comes out again for Fuk sake treat them gear shift cables like your banjo. Don’t want to hear for next 2 races you might of kinked cables 😉

[@tybgycfmb8697]

not talking about the stringed instrument im guessing 😂

[@dannyDC2]

Haha yeh won’t be doing that again in a hurry

[@buddha8796]

just drive faster.....

[@dannyDC2]

💪

[@threepotMR2]

Mans got no van, back in the beemer sleeping on the roof. Cruising the luxo barge brimmed full of gear better than being a man in a van?

[@dannyDC2]

barge best

[@VANHAUSConversions]

Check your fookin Instagram messages