BIG TURBO Gbody SBC Monte Carlo blow thru set up! Junkyard build!

This is just a little walk around video of my 1983 Monte Carlo with a 355 small block Chevy 98 mm Turbo couple clips of some tools and a short video of my buddies LS swap 350Z doing some drifting! Please hit subscribe if you like this video! Thank you for watching let me know what you want to see next!

[@jsteed4388]

Stay humble just like you are teach people that want to learn. I love this video because it shows It ain’t about the money. I hear so many making excuses, when I get the money I’m gonna do this or I’m gonna do that. You took what you had, and its running that’s a lot further than most get. Keep up the good work it doesn’t have to be perfect to be enjoyed...

[@tcpowerwashing3674]

You said a mouth full #Bigsalute

[@bigcube501]

Agree! 👌🏾

[@johnnyatkins9097]

Haha buddy you will probably have more fun with that car than if ya had a hunert thousand dollar one. Just keep tuning it and have a good time. It take me back to my youth when all I had was ambition. Good job 👍🏻

[@CarlosTrujillo-vh5dv]

I respect everyone that work on on there cars. i remember 05-08 high school i was the poor transfer kid from mexico pops passed down a 78 pontiac Phoenix coupe..i busted my ass working for my dads friend that had a roofing company..summers were rough out on the roof..i saved my money and i was so excited ordering my first aftermarket parts from jegs..got some good some heads and a cam and my first holly 750 cfm double pumper on a edelbrock performer manifold..i painted my car in autobody class, i remember still driving it daily to school without bumpers and hood and a license plate visible 😂the struggle was real...everyone was so passionate about cars back then especially if they put the work in themselves..i was proud of my 350 i pulled it from my uncles wrecking yard, out of a buick la sabre and built it to run with all the rich kids modern camaro z28,mustang gt,trans ams and c5 corvettes..i could run with the best of them..those were the good o day the car scene was so huge..there were car clubs on every corner lot on our main 4 lane strip..racing was non stop or just cruising cuz gas prices were so low everyone could enjoy bieng out..

[@Maria-hb3kc]

I support anybody that make's it happen with wat little they got. I love the car.

[@DentedDiesel]

thank you

[@jj629ful]

More people should do builds like this and cheap as possible. Btw very nice!

[@geneendicott9228]

Dannnngggg love it most real turbo sbc put together I've seen. Keep going take your time love to see more

[@danstomber1664]

You know I like the fact that your so humble Thank You for the video

[@DentedDiesel]

Thank you! Im glad a couple people actually watched it!

[@boostedrr7205]

These are my absolutely favorite type of builds

[@1953fords]

Love the build bro! Need more of these builds. Ordinary people with a passion and desire to create. No big dollar parts. Run what you brung! Make it happen. I’m the same way. 👍🏻👍🏻

[@diablocustomschoker2058]

Hell yea.buddy👍

[@desifrazier121]

Wow I found what I was looking for proud of you man love the set up I want to do this on my 406 sbc ??? Glad I came across your video sounds like music to my ears

[@shitbox7413]

Right on man, build what you can afford and have fun, that’s what it’s all about. 👍🏻

[@backyardbuilttrucks1]

We have boosted a bone stock 2 bolt main sbc many times . As long as you keep the boost down it will last . Done 8lbs on a roots blower and 10 lbs on turbos and they lived for years .

[@issanova8573]

I’m planing on building a twin turbo sbc , do I have to build the internals or bottom end ?

[@harmankardon478]

@@issanova8573 its about boost level as more boost more temps... stock bottom end youll need to keep the boost about below 7.5 psi for it to last imo. 5 psi would be safe assuming tune is gtg

[@anthonyrobinson6430]

One day at a time bro you’ll get there

[@disguyovahere9376]

This would drop right into the apocalypse

[@twondogg2102]

As a fellow mechanic....... I love this car...it started right up.... Plus all the made it workness...bro I like it..lbs... I hope we run across each other in life an do sum builds and business.... thumbs TF up bro

[@DentedDiesel]

Thanks man your awesome!

[@ericflower9855]

Be proud of that shit...you built it...have fun n learn...got to get a wide band o2 "there's cheap ones on Ebay" to tune it and look into some kind of timing under boost...

[@Helloboby]

That’s freakin awesome bro.

[@DentedDiesel]

thank you

[@evapeters9840]

dang! i love that boost lag!!!!

[@evapeters9840]

I love when the boost starts rolling in and just starts rippin! Awesome build man!

[@brandonlawrence9777]

Tell it like it is bro “it’s not the nicest car… n I don’t have a lot of money…. “. BUT, I do have a HUGE ass turbo on my G body.!! ” 😂👍🏼

[@DentedDiesel]

All facts, no lies.

[@middlesiderrider]

Awesome man. Cars like these are the best when you see them on the street. After doing engine swaps in my'68 Grand Prix and '71 LeMans i initially drove with the hood off for the test drives, and people always dug it. Craning their necks to look in the engine compartment. A big turbo sticking up makes that even better. Some advice: get rid of your engine driven fan and buy a mid90's Taurus 3.8 electric fan. They are two speed and have a three wire oblong connector. I just got another one yesterday for $23 from the U-pull-it. They take about five minutes to remove, very easy. And they flow as much as $300 aftermarket fans, and have curved blades so they are quiet. I've put them on 400-500hp engines with cooling problems, and they never overheat afterward. Plus the fan frees up power and ups fuel economy. I'm getting ready to install my new one on my '82 shortbed K10 to replace the junk flex fan. If you install one it'll make some room for an intercooler too

[@codyschoenen9441]

Dude its sick as hell. embrace that car. Put a sticker on it "The Tractor".. "on my way to plow yo bitch" lmao. Plus its always cool to see a car that oviously hasnt had tens of thousands of dollars dumped into it and its racing with the big boys. Keep at it.

[@DentedDiesel]

love it

[@geneendicott9228]

Love it!!!!

[@ibroughtaturbo-chargerfrom667]

And i want you to do drifts...😁

[@DentedDiesel]

bett

[@ibroughtaturbo-chargerfrom667]

@@DentedDiesel hehe

[@Dude-yo5ec]

it sounds like you either have bad air fuel ratio (little fuel for that much air), or you're getting really hot boost, try tuning the carburetor little bit more, and put an intercooler in if you can. it has nice turbo, but you should be getting a lot more power with it than what it shows in the pulls. I'm looking forward to see more videos !

[@levimccoy4800]

Hell yea! Sounds like a tractor until that boost kicked in and those street signs start flying past. Cool build!

[@DentedDiesel]

Lol thank you!

[@dieselburner4461]

This bad ass. I’m doing the same soon. I got a 350 sbc on my 83 regal grand national clone

[@Rfscoco]

I got just dropped a 350 into my 87 grand national and wanna turbo it too

[@toon_on_24s]

@@Rfscoconice work g body family

[@SOHCGT96]

Work with what ya got my man. As it comes along, you'll have earned every little bit of it.

[@freddiemoralez1536]

Good work, sounds like your kick down cable is not hooked up.no down shift when you punch it

[@DentedDiesel]

it was

[@JP-iu4vz]

Great build! Love to see heaps brought to life a little at a time. Currently working in my own 64 f100 rust bucket

[@HardRockRecords]

I like the weathered look .

[@DentedDiesel]

Thank you!

[@Toomanyprojects1993]

Whatcha running for timing? I absolutely love this car, has so much more character than an off the lot hellcat or something

[@glasserallen]

Wow that's awesome great build I have me a brand new gt35 turbo that I haven't done anything with everyone says they're only for smaller motors and will not work on a V8 it's awesome to see that you prove them wrong great job 👍👍

[@pops3554]

This reminds me of my first Car I built from chevy Buick Ford in 81 firebird with a 78 front-end. I was 15 at time....cool build though!

[@Zelaznogsiul-63]

Quite a unique build, it is like Mad Max moved to Florida and bought a Monte Carlo, I say this as a compliment, kidding aside an Inter cooler could give you some content for your next video, hope to see more of your car, I recently bought a 1980 turbo trans am and is a draw thru system no way to put an intercooler but it is unique and gutless. Great video.

[@rickpenalver3912]

Fuck yeah brother thats bad ass

[@DentedDiesel]

thank you

[@raysason4838]

Great build

[@DentedDiesel]

Thank you! I really appreciate it!

[@stowaway475]

A you should have went with 2 gt35 turbo cause they have a much smaller exhaust housing that gt45 it works but for what you got and with the twins you can use a after cooler from a 300zx and that Holley duel intake hat just a suggestion

[@bigloads3600]

Sounds like it's missing or a dead cylinder on top of the exhaust leaks....

[@DentedDiesel]

your absolutely right on that.

[@Reyo562]

Sounds nice bro

[@1452-w3b]

Dude I actually love the way it sounds too on skullcady crushers it sounds mean!!

[@52felix87]

Really bad lag!! Tune that carb

[@mrbouttabag3995]

You would build up boost a lot faster and be a lot quicker in the streets with a smaller turbo setup but I love the build no doubt thinking about doing my truck

[@christopherhurtado524]

Do you happen to have link to blow off and boost gauge, i have a 87 chevy caprice im trying to put twin turbos but im guessing one will do the job for now, mild stock motor 5,7 w vortec heads.

[@brandonsizemore9211]

I like the video, you should do a video on how you personally made the carb blow thru

[@DentedDiesel]

Im gettin ready to pull the motor again so when the carb is off i can make that video!

[@quicksilver462]

I do not see a boost referenced fuel pressure regulator, and only noticed a stock mechanical fuel pump, stock fuel pumps are good for maybe 7psi n/a, blow through the carb with 7psi boost and fuel pressure will drop to ZERO!

[@DentedDiesel]

I didnt have one yet, I just ran a boost line to the mechanical pump. worked fine for the time.

[@jeffjordan8949]

Hey yours is running

[@rbarker4426]

Run two sets of Mr. Gasket exhaust header gaskets on each side. And retighten after you warm it up. And a few heat cycle's. Retighten. Before you drive it.. recheck exhaust bolts.. Exhaust leaks is a boost Loss you're losing more than half your potential boost through exhaust leaks

[@barneymiller7894]

Bad Ass 👍 real budget street car right there! Get some slicks and a anti roll bar and troll Vettes for 💸💸💸💸

[@lazaro121774]

excellent¡¡¡...

[@jeremiah_c10]

How much whp are you making bro sounds nice ??

[@DentedDiesel]

Not much

[@johnnywrench5579]

A cam and a little more converter will really help

[@stirfry59]

I hope to do this with a gbody cutlass I plan on buying

[@toon_on_24s]

Do it. Each part you add is an important component and investment

[@yomomma1328]

Sounds like it's missing on a couple cylinders. Make sure none of your spark plug wires are grounding out on the headers and all the spark plugs are good. But nice build. Keep doing what your doing.

[@Mpreston89]

Sweeeet

[@marcoguerrero1302]

How do you make the pro form 650 a blow through it trying to do this on my foxbody but lost on the how to blow through

[@joephillips3472]

What a piece of work. I would drive the hell out of that g body. Keep up the work bro. Luv your outlook on it. I luv it!!!!!!

[@DentedDiesel]

Much appreciated

[@_JoeMomma]

I fucking love this. I got an 86 caprice shit box that I plan on putting a turbo in this winter.

[@DentedDiesel]

doooo itttttt.

[@ibroughtaturbo-chargerfrom667]

Is it automatic?(And if it is what Transmission is it?...and I am a 14 year-old but 2 years more and I will start making the car

[@justingrimes8293]

Who’s the hood shut with that?

[@nicholasfarris983]

Did you end up using a boost referenced fuel pressure regulator? Or just straight from the pump

[@creativeexperience6388]

doing the same thing in my 84 buick lesabre with a 355 sbc and a 700r4 trans

[@toon_on_24s]

How is that 700 trans gonna hold up you think

[@creativeexperience6388]

@@toon_on_24s honestly no idea yet

[@Scrildo1]

I’m surprised you’re making boost with so those exhaust leaks also that line needs to go to the bottom port on the wastegate.

[@justinmartinez5952]

Asjust the timing sounds like there's more power advance it more

[@MrJaycocleaning]

Sounds like you need way more back pressure/exhaust.

[@chrisslaughter5482]

Good job man keep up the good work have fun is the most Important

[@jaime13huerta]

What are you using to check afr Nd timing

[@DentedDiesel]

Just Timing light. still getting it figured out! Lol i hate driving it right now.

[@bradleylove4918]

Florida. I ones lived in Jacksonville

[@pjskaggs6093]

Did you lock out the distributor? I’m building a twin turbo 347 and was just curious about that. Awesome build

[@douchebag4057]

Look like Florida

[@thecarbonelsyoutubechannel]

Can you show me the link to that kit ? Please

[@MrJaycocleaning]

But can she NOT race with the kids in the truck....

[@joedrt0013]

I got closed captioning on..... N while the motor jst sitn idling..... Says music is playing..... Luv it👍💯 GTRDUN 🤙😜

[@DentedDiesel]

yesss lol

[@travisy7861]

youre my spirit animal. is this thing still around?

[@RL-bu2ln]

Awesome build how much HP you think your making

[@dirtcheapmedia3390]

Dyno or track e.t?

[@anthonywallace6636]

Have you upgrade your stall converter I think it will help with your launching

[@DentedDiesel]

I agree

[@pmd7771969]

The exaust will go right into the cab

[@DentedDiesel]

I made a new one

[@williepotts2185]

Hell yeah! It's better than nothing, right!

[@willparker3170]

Did someone say turbo lag

[@DentedDiesel]

I like it like that it's like a little surprise for the passenger

[@willparker3170]

DentedDiesel I dig it man. What kind of numbers do you think you are making

[@J2A61]

Is the motor built for boost is the question????? If not your waisting time and money should’ve just bought a junkyard 5.3 that old sbc isn’t going to live long just a lil warning buddy

[@jacklander233]

I am genuinely impressed 👌

[@Voodoo_Mouse]

This is such a rad build man!

[@DentedDiesel]

Thanks man! Ready to rebuild already lol

[@BRUH-mk2vr]

The spiral brake lines add 30hp!

[@toweringhorse2054]

Looks super intimidating

[@ssperformance4507]

Have have been looking to do they say thing do u still have heat ?

[@jdtv...9134]

Invest in a harbor freight welder. Practice on scrap metal if you don't know how weld. I did and it was the best decision I ever made. With that welder alone I could do small jobs to make money for my projects. 🙏

[@206BLOCKMONSTER]

“BRAND NEW PAINT!” Love it !!!!!!!

[@jemelmonger]

Yo this is so nice !

[@terrykarney6466]

I need a turbo setup for my monte but im broke asf and idk how to weld so make an exhaust

[@goodtimeteelsturbobuilds9246]

Hey man I have some questions about what your doing for ignition and timing?

[@bigcube501]

Is it fuel Injected? Or carbureted...I have a 350 small block as well n thinking about turbo'n it...

[@michaelbliss1976]

It’s carbureted

[@bigcube501]

Sweet! I'm carbureted as well! Always thought I had to go fuel injected to do a turbo on it

[@DentedDiesel]

carb

[@fcoedgarmtzn]

Very good afternoon, I had a very good job, I am making a 1999 chevy 350 vortec 5.7 engine in a 1977 nova SS and I have a question, if you could help me solve it, it is in question of the carburetor that I modified, because I saw that they can crush the floats or throw excess gasoline I hope and can help me with that question thanks

[@AnthonysResurrectionGarage]

Love it!

[@youngflaco8585]

Junk

[@donnierogers9064]

Now would this blow through system work with a tbi? I figure its the same deal just on top of a tbi instead of a carb

[@shitbox7413]

It won’t work, don’t waste your time.

[@kmrjeep]

Yes blow thru will work on a tbi just need to increase fuel pressure and play with timing vortech super charger used to make a blow thru kit for tbi's back in the day turbo is the same principal my buddies dad had a vortech charger installed on his small block tbi truck in the early 90's to help out pulling his horse trailer. Tho tbi heads suck I would at least do a head swap and cam and there was a company that made a kit to adapt regular high pressure style injectors to the throttle body you have to swap the pump and regulator to a higher pressure setup but will definitely help with tuning and the injector selection with regular injectors are plentiful and easy to find compared to the handful of regular low pressure injectors available.

[@robbycheaib1719]

So cool bro!

[@EngleRacing]

Dude this is awesome. Half these mechanics couldn't have done that

[@SS_Gang777]

I like it bro nice build

[@DentedDiesel]

Appreciate it

[@jacklawrence2957]

Thought that car looked familiar. DAYTONA

[@1452-w3b]

This thing is sick!!!👍👍👍

[@DentedDiesel]

thankyou

[@Kayaan_thegreat]

Wat carb u got blow thru or regular race carb

[@DentedDiesel]

race carb I converted myself