BIG Turbo Inlet Pipe Install!

Today we install the oversize TIP from Creation Motorsport on my 1.8T AUM (Ko3s) GTI. It's not a very fun job and you need to make a few adjustments to get it to fit, but we got there in the end! Let me know if you've installed one, or if you're going too. It may be easier on some engines than others!
Link to the TIP: creationsmotorsport.com/index....
Or you can spend an extra £100 to go for the SFS inlet pipe, which may be slightly better fitment, but I can't be sure as I have never seen one!
➤Follow me on Instagram!: / bradwtv
➤ Follow me on Twitter!: / bradwtv98
➤Add me on snapchat!: BradWTV
➤Like my facebook page! / bradwantstovlog
Almost all of my music comes from these guys:
Lakey Inspired:
/ @lakeyinspired
DJ Quads:
/ channel

[@BWTV]

Do I have a notification squad yet? 👀

[@Ghost-_-94]

Yeah mate! Keep up the good work !

[@BWTV]

Thanks man! 🤙

[@waqashussain5888]

Sure thing

[@zak2175]

BWTV damn right you do. Keep up the good work I love watching your vids 👍👍👍

[@archeksb]

yeah, after some mods, downpiped it, you should remap computer. It will solve problems

[@James-ki6kj]

I love this channel because of the often uploads, the car and your content and it's quality. Also I have a mk4 golf as my first car 😁

[@ADI-pv1ll]

Atleast it still runs brother, cant wait until you get it mapped. As always lit video and keep it up man!!! ;)

[@ixeqilibrium]

"I got my little helper with me today, I don't really know what im doin, so i can't even help myself" xD Haha go on lad, best way to learn them things, is doing them yourself, spot on! Bring on the remap :D

[@BWTV]

Cheers man! appreciate the support

[@aidankingman1316]

Mine boosts to 22psi on a good day, but the bleeding thing jumps into limp mode constantly. Been having fuel issues recently where if the car is under any sort of g, whether cornering or acceleration, the fuel gauge drops, often to 0, and the starves the car of fuel, which then puts the bastard into limp mode again. Not sure if you know what it could be 🤷🏻‍♂️

[@callumbrennan7581]

I had the same problem using the creation motorsport tip but I bent my water line as well, I removed the gear selector to allow more access

[@harryjarvis4452]

Again, another awsome video 👌

[@RainingInHD]

Did you notice any difference after installing this ? Looking to do it on my A4 1.8T remapped

[@matthewcharles2526]

Hi there where did you get the piece of pipe so that you could fit your induction kit..

[@andyslater9067]

If you're still using the standard recirc valve, then get an aftermarket one. Because it won't hold much boost if you map it

[@TheNorville2]

Hello, i need to buy a set of Jubilee clips for my install. Can you tell me the size i need to buy?. Thanks

[@IamNotInIlluminati]

Do you think I could fit this to my agu engine?

[@rsyt3113]

I got mad exited when I clicked on this because I didn't see 'pipe' in the thumbnail , so I just read big turbo install 😂

[@davebob5877]

New to your channel and only watched a couple of your video but they are awesome love them

[@BWTV]

Thanks bro! Appreciate it 🤙

[@mk3caddy100]

stage 2 map will give you a big smile now

[@BWTV]

I can't wait 😁🤙

[@genzblooming7584]

this is factual my gti is pushing 22 pounds of boost and i stay with a smile ear to ear

[@carloscharre662]

Genz Blooming what mods u got in ur car? My car pushing 18psi and it wants more lol

[@lukestanley8945]

Genz Blooming e

[@dani390z]

What is a reasonable fitting time estimation? Never done this. I am more interested in the SFS oversized one tbh.

[@shyam8102]

Is your turbo inlet pipe going into a K03 turbo?

[@luisg1653]

Have you checked the code for your check engine light? If you have a leak it may explain why boost didn't peak. Enjoying your videos, that's a good looking MK4 and same color as mine. 👍

[@4nish1993]

Have you considered doing a boost leak test?

[@rossgibson6097]

How much did you cut off ? 5mm..10mm?

[@Bendidormweirdos]

Where did you get them rear lights?

[@TheSavageGarage]

I don know if it's my iPad playing up but there isn't any sound?

[@BWTV]

The Savage Garage may be your ipad, there's sound for me 🤷‍♂️

[@4den63]

Honestly speaking are golf 4 8v gti turbos good cars for beginners..?

[@ashhaque9352]

Great work bro! Get it mapped now! Haha

[@BWTV]

Cheers mate i will do 😛

[@itzblitzyv3664]

That noise is turbo flutter?

[@gnarshread]

Its great to see young bloods getting their hands dirty. Props!

[@Jhonnynova]

What is that black pipe? Coolant? pcv??

[@JDMJake182]

nice video, need to hurry up and get it mapped though, can't wait for that one.

[@BWTV]

Cheers man, I'm super excited 👌

[@javi.280.3]

70mm a 80mm? Caudalimetro en 80 mm? Opinión?

[@the1ghost1of1caveman]

sick

[@dyllman98]

unfortunately in the states we cannot use the oversized silicone pipe due to the master cylinder being in the way :(

[@Gypsyjohn476]

I race my 1.8t mk4 golf up and down sunbury cross high road , where the fire station used to be and the petrol garage .

[@kevenmimeault298]

Valve cover is leaking!

[@markusjohansson5114]

Dude, I have a Seat Leon 1M 20vt4 -01 with an AUQ engine (KO3s turbo) and ARY gearbox, literally the same as a Golf mk4 (just the 180hp engine). I tried for 4 hours to get it on, I cut of as mush excess silicone from the pipe as I could to get it on to the turbo, but somehow one of the lines/wires between the gearbox and lever is in in the way, I also think the bracket that holds the 2 lines were rubbing against the pipe. Anything that you remember you had trouble with when you fitted this?

[@BWTV]

Reading this seriously made me have bad flashbacks of installing the pipe xD All I can really remember is trying to squeeze it between the coolant pipe (which i ended up bending forward a little) and snipping a bit off the front and end of the pipe. It was a tough thing to do, having 2 people helps as you have to be up top then below ect. Wish I could help more, good luck with it!

[@markusjohansson5114]

@@BWTV I'm sorry 😅 Yea I don't know what to do, I can't deform my coolant pipe any more, but I don't think that's the issue right now. Also since mine is a 4 wheel drive I have a lot of clearence issues from the bottom 😬 I might try it again but I think I'll try to undo the gear line bracket on the gearbox to get some more clearence.

[@shiftinggears9896]

Brad why didn't you do what I said unbolt the 2 water pipes metal screws that hold that mental pipe onto the engine side.. If you did that 1st and then bent it you wouldn't have had half the problem.. The turbo intake pipe is under pressure you gotta make sure you have a good sill.. If you dont your turbo will be pulling in Unmetered air and will affect your fuel trims

[@mrnurse4479]

hey, did u feel any big difference from the stock?

[@protonicstorm7228]

According to forge there is 12 bhp gain over stock intake pipe.

[@jeffledger846]

What’s the big chrome pipe next to the one your installing bud ??

[@WaelElkassem]

@Zero719 😂😂😂

[@mrn9211]

Remap next cant wait

[@BWTV]

So close 👌

[@adamcross8612]

MRN fuel pump 1st

[@insidebyte8561]

Brad a 100% serious tip, everytime you change something disconnect the red/postive battery terminal for 30seconds or so, it resets the ecu and it learns what mods you have done, not as much as a map but it will run better!

[@BWTV]

Will give it a try tomorrow actually, it has been running slightly weird. Cheers for the advice!

[@insidebyte8561]

BWTV No problem, it might not make a difference straight away, my fiesta diesel takes about a 100miles ish to feel proper but it might be different for your car, hope it helps :)

[@jm4gaming886]

I know it’s been a while but would this work with the throttle body after disconnecting it?

[@turbowarrior44ashg24]

I know it’s late lol but did you do all the deletes without mappin and was it still drivable or did you map out but by bit or all after

[@BWTV]

It ran okay without a map but it will come up with an engine light and some codes

[@turbowarrior44ashg24]

@@BWTV no worries mate thanks,I’ll sub

[@andrewwright.]

Get it mapped and I'll race you in my MK1 Leon 1.8t.

[@shiftinggears9896]

I have to stick up for Creation Motorsport here and say they make a good product especially for the money. It's definitely not a fun job to fit and respect for trying. I found it funny watching you struggle as I have one on mine and understand they're a nightmare. Loosen the waterpipe bolts that hold that pipe against the engine.. That will release alot of tension and then bend the pipe slightly.. After doing that you will have enough room.. Get yourself a new creation Motorsport tip as that one has definitely had it mate.. Do you have VAG com?

[@BWTV]

Ian Janane yeah oh well it's on and done now. It's running fine and it needed to be cut slightly to fit. Seems to be good and hope it holds. And no i dont have vagcom 😛

[@shiftinggears9896]

Vagcom is really simple to use and great for working out when we have problems with cars.. Its like a tech computer. You can run it off your laptop. It's free or you can buy the full version for around £300 all you need for the free version is the obd2 cable which goes to your laptop and some software it costs £10. You can look at car values and delete codes.. You can also unlock hidden features in the car that you had no idea were there lol I was surprised.. Check it out mate

[@shiftinggears9896]

Check out Ross tech it's great for us.. You can buy the obd there

[@tbonez8043]

100% mate, love your channel and how you and your girl work on your car, Cheer's!!

[@BWTV]

Cheers man! Appreciate it 🤙

[@redneckserviver3822]

That noise is called turbo flutter

[@Eagle_Eye_Detailing]

The only oversized tip you should be getting is a badger 5 ... Full 3 inch one the only one that's proven gains and isn't restricted..... look it up

[@BWTV]

They don't do a ko3/ko3s tip, only ko4. Looked up all the makes and this was best for the price

[@MrAidenCrocker]

13mm bolt on the block holding the hardline in place, undo that and then throw spacers in behind it. Also creation motorsports tips are ass. mine split after 6months. dont buy forge either, well overpriced.

[@chinoespinoza7801]

Get side skirts

[@madcat4563]

7:17, wot racism?

[@adamcross8612]

Should of got a ford

[@BWTV]

Rather have my old Peugeot back 😂😛