MUST HAVE locks for your expensive Hitches! InfiniteRule for B&W and BULLETPROOF HITCHES

InfiniteRule Locks
www.etrailer.com/s.aspx?qry=I...
#rv #towing #trucks
Wife’s channel: / mrsbtbrv
Instagram: / bigtruckbigrv
Facebook: / bigtruckbigrv
Links to many of the accessories I review and use from etrailer!
www.etrailer.com/infm-big-tru...
RV Towing Upgrades
*Reese Goosebox Gen2: www.etrailer.com/Fifth-Wheel-...
*B&W OEM Gooseball: www.etrailer.com/Gooseneck/B-...
*B&W Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*B&W Sliding Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*Equalizer Weight Distribution Hitch: www.etrailer.com/Weight-Distr...
*B&W Tow and Stow Hitch: www.etrailer.com/Ball-Mounts/...
*Curt Drop Hitch: www.etrailer.com/Drop-Hitch/C...
RV and Trailer Equipment Upgrades
*RoadArmor Suspension Equalizer: www.etrailer.com/Trailer-Leaf...
*HD Shackle Straps and Wet Bolts: www.etrailer.com/Trailer-Leaf...
*RV Suspension Upgrade (travel trailer, Cargo Trailer): www.etrailer.com/Trailer-Leaf...
*16” G Rated Wheel Tire Combo: www.etrailer.com/Boat-Trailer...
*Goodyear Endurance 15” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Goodyear Endurance 16” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Furrion Wireless Backup Camera: www.etrailer.com/RV-Camera/Fu...
*Furrion Wireless Side and Rear Cameras: www.etrailer.com/RV-Camera/Fu...
*Phoenix Electric Trailer Jack 4,000 lbs: www.etrailer.com/Trailer-Jack...
*GlowStep Revolution Steps: www.etrailer.com/RV-and-Campe...
*LCI Solid Steps: www.etrailer.com/RV-and-Campe...
*LCI AutoLeveling System: www.etrailer.com/Camper-Jacks...
*Reese Fifth Wheel Dual Motor Landing Gear: www.etrailer.com/Camper-Jack/...
Must Have Equipment!
*6000 Watt Generator Kit: www.etrailer.com/Generators/e...
*3200 Watt Inverter Generator: www.etrailer.com/Generators/e...
*2000 Watt Inverter Generator: www.etrailer.com/Generators/e...
*30amp to 50amp Power Cord: www.etrailer.com/RV-Wiring/Mi...
*LED RV Replacement Taillights: www.etrailer.com/Trailer-Ligh...
*Fastway Tire Chocks: www.etrailer.com/Camper-Jack/...
*RV Foam Sprayer: www.etrailer.com/Car-Cleaner/...
*RV Soap: www.etrailer.com/Car-Cleaner/...
Truck Upgrades
*Airlift 5000 Airbag Kit: www.etrailer.com/dept-pg-Vehi...
*Airlift Wireless Air Controller: www.etrailer.com/Accessories-...
*Access Toolbox Bed Cover: www.etrailer.com/Tonneau-Cove...
*Bedrug Bed Liner: www.etrailer.com/dept-pg-Truc...
*Floormats: www.etrailer.com/s.aspx?qry=F...
*Etrailer.com is the official sponsor of my channel. Equipment reviewed may have been provided by them as part of that sponsorship. All reviews are honest and unbiased. This channel is for entertainment purposes, and you should always do your own research prior to making a decision!
Sponsored items may be in this video. Always research multiple sources before making a purchasing decision. As an Amazon Associate, I earn commission from qualifying purchases.

[@fuser4397]

7:15 your welcome 🙅🏻‍♂️

[@kenpolzel412]

Thanks for sharing the furnace repair

[@classicrocker81]

Infinite Rule has some great products for sure! Ive had my locking hitch pin for around the same amount of time and its held up well. No complaints at all

[@classicrocker81]

Ended up ordering a brand new set of the stainless ones for my Andersen Rapid Hitch and im glad I did. I really didnt think the quality could get any better but somehow they surpassed my expectations for it. Totally worth the money!

[@akbychoice]

I would clean up the corrosion and hang on to that board. Doesn’t look like it’s in the best spot to avoid moisture damage.

[@bishopgeorge1333]

Awesome, I will be getting the tow&stow B&W hitch for my Denali I want to get those.

[@scottmuesse4738]

The Furnace on my Brookstone 398MBL did the exact same thing. The water is coming in around where the furnace is screwed into the side of the rv. Remove those screws, bend the tabs down and that plastic piece will come off. Run a bead of silicone around it and put it back. Problem solved. I had mentioned this in the comments when you first mentioned this issue around a year ago. I'm betting your new board will mess up once the next heavy rain comes in because that box is not sealed from Coachman.

[@TimHollingsworth-zy7mn]

I think the small white ring/tube that was in the package with your control board for your furnace was to slip over the four corner post to release the clips so the board could slide up and free of the pins. I would’t bet the farm on it but that was just a guess. Have a good day!

[@servicetrucker5564]

BOLT hitch locks are the way to go. Use the truck key instead of adding another to my overloaded keychain

[@brianm1916]

Does anyone know why they are using old style through hole components on the circuit board instead of surface mount?

[@craigwilliams1073]

Happy Thanksgiving!!!

[@josephpuchel6497]

Hey Just came across this video. I like the circuit board change out. How much was it? If it were one on a house furnace it be $1500-$2000 dollars. The BW needs total of 4 locking pins doesn’t it. Excellent video

[@JM-mp4dm]

Is it necessary to lock the attachment? It can’t be removed

[@bradnone1945]

How well are pins holding up ?

[@ericbowers71]

Ha… those wafer core locks can be picked in about 30 seconds.

[@dandennis8465]

What keeps the shield over the exhaust from flopping in the wind while towing?

[@BigTruckBigRV]

It is held in place by springs. I'm guessing the vented nature of the cover allows air to flow through it.

[@richardclayton2622]

Do you ever use an impact driver to run screws in and out?

[@richardclayton2622]

@btbrv1414 I used to use drills then a contractor friend let me use his impact. Could never go back. I use Ridgid, lifetime warranty tool and battery

[@richardclayton2622]

@btbrv1414 all the time, try it, you'll love it

[@foreverfixin]

You have a scammer offering gifts buddy just thought you should know

[@sheldonfocht2166]

Your trailer link does not work. Good video

[@stevehorrocks8029]

Don't show the locks to @lockpickinglawyer!🤣

[@bryanthornton6787]

Took him 30 secs without even trying...

[@i70show]

You should of unscrewed the locks so we could see the thickness underneath the locking mechanism. Come on man ! lol

[@i70show]

Dumb location to keep the board dry…. How long will it last ? Nobody knows because it is crappy engineering !

[@curry7500]

Cover it with aluminum foil