F-Zero Full Assembly | Unboxing | Motorized Bike | Bike Berry

[@TheBigred1781]

Make sure to loc-tite the bolts that go through the rotors & motor sprocket. They WILL back out. Also, check the wheels closely. I had to take both to a bike shop to have them trued & dished. They were way out of wack straight out of the box. Plus 1 of the pedals broke the first time I put pressure on it. It's not a bad start but for the money, shouldn't have to drop more $ before it's rideable.

[@tonytaylor5087]

Thanks for sharing your experience! This one is pretty close but still needs some work. I’m going to cover truing up the wheels in a future video. In this hobby it’s something we should all know how to do because it’s part of the build process.

[@perheiro]

I'm building an F-Zero from the ground up (first full build) and I say thank you, thank you, thank you Tony. This is the only video in the solar system that explains the triple tree assembly correctly. This super helpful video is my owners manual. Again thanks.

[@ogremgtow990]

The bike they sold me the tire blew while putting air in it. I found the rubber gasket that goes over the spoke screws was not there. I used electrical tape to fix that and put on a new tube. The kick stand was far to long and the bike fell over in the opposite direction . While putting the 32 tooth sprocket on the rear wheel the axle broke so I ordered another rear wheel. the engine bolts that mount the engine to the mounting plate were not included in my kit. Overall I will replace the garbage with a Huffy or a Murry from Walmart. it can't be as bad as the what Bike Berry sold me.

[@JoseDiaz-hr1rb]

Bike Berry acts like all there shit is full proof, when reality says otherwise

[@MotoredLife]

I'm a huge fan of this frame!

[@tonytaylor5087]

Me too brother!

[@edwardbeierlein2587]

Expert assembly! How can you go wrong with Don Knotts looking over your shoulder?

[@tonytaylor5087]

Love how you caught that 😅

[@atheistconservative6211]

I love the handlebars. I know many guys don't like drag bars but I do

[@tonytaylor5087]

I dig ‘em!

[@bmaluginthevanishingman6034]

What's up Tony I just previously ordered the BBR tuning got it on the bike started right up but it has no power I have to get it going a certain speed to get it going when it stops it dies. Any suggestions

[@rubentrevino2372]

Informative. 👍 Thanks for the how to video, Tony. Signed: Future purchase of F-Zero Thanks again for being out there in motorized bicycle community.🙂

[@tonytaylor5087]

Thank you so much Ruben!

[@CMG78]

if you plan on going 50 on this thing you will need better breaks the ones that are on the F-zero do not have an adjustment bolt for adjusting the gap on the break pads. I almost rolled down a hill onto US highway 51 because these brakes we're unable to provide adequate stoping force. for any speed over 25 your going to want Shimano hydraulic breaks ,Gemini rims and a proper set of down hill forks. and that is still stretching it. At the end of the day these are still bicycles of dubious quality and they are not designed to go this fast for long hauls. please don't misunderstand me I love this hobby but I have seen many horror stories and pictures from other builders to not respect the fact that speed kills.

[@tonytaylor5087]

Definitely. Fast speeds require serious build skills to accomplish. I noticed on these brakes a silver adjustment screw on the stationary side that had a dab of locktight that I had to break loose.

[@michaelabbas7910]

Where did you get this exact seat? I like the look and how it isn’t super long.

[@WredFawks]

I still can't get over the backwards handlebars.

[@t.a.caudill3194]

Bikeberry sent me my Fzero brush aluminum stage 4 performance Bike with deep scratches and tank dents. Up to now the refuse to exchange..they offer $50 store credit for me to keep this scratched and dented bike...im not asking for credit or discount...im not asking for full refund...all i want is the bike i bought and paid for...the one WITHOUT SCRATCHES AND DENTS.

[@bluetimes1]

I have a question. I bought a felt faker and my fork looks like yours but the piece that goes up in the bike the piece you will eventually screw to hold everything together, mine is much longer and the knuckles go way below that piece. Is there something wrong with the fork? Thank you for this video. It is the best.

[@beaubrummelmotorizedbicycles]

Great assembly video on the F - Zero, but Tony put a 4 stroke on it please, either the HS 49 cc or the P 79 cc. No mas 2 stroke.

[@tonytaylor5087]

Your wish is granted! 4 stroke is on the way 😃

[@beaubrummelmotorizedbicycles]

@@tonytaylor5087 Thank you, looking forward to a great bike build.

[@motorizedbicyclenation53cu90]

@@tonytaylor5087 try upgrading a cylinder if ya want torque and speed these port durations are what ya need 160/120/20 or 160/110/25 ex/trans/BD. Or go 165/120/22.5 they should get ya 43-47mph depending on gearing and cylinder choice

[@motorizedbicyclenation53cu90]

Also get a boost port 160+ for higher rpm

[@joejanitor8410]

Ordered a full setup for sons build and may buy a full bike if all goes well !

[@LeSiZmOr]

Nice job on vid. Interesting terminology.

[@pewpewbbqs]

Hey. I just ordered this bike from Bike Berry yesterday... Right off the rip, I wanna replace those headset bearings with a sealed bearing headset... can you tell me the size I need to order? I know it's a 1 1/8th headtube , but is it 34mm , 50mm, something else?

[@tiger7777]

Thanks again Tony Taylor. Really been perplexed about these felt faker knock-off frames. Keegan and LA Hover have said that these BBR F-ZERO frames are good and tough. Also been looking at the Zeda Dawn , only thing is that that one has 14G spokes???? Are they the same frame?

[@turkeysandwiche8552]

That is slick

[@josephdale5400]

What type of rear hub assembly comes with this kit rag joint ?? Or hub adapter?? I'm getting ready to buy this bike and really need to know soon can someone answer this question for me thanks

[@brandenvargas4268]

Is there any videos how people put the motor on this bike

[@tonytaylor5087]

Coming up in the next few weeks.

[@jamesshawger1083]

Hey Tony question can u fit a 3inch wide front wheel to this fzero frame

[@motorizedbicyclenation53cu90]

Don’t go 50 on those forks best to get rigid forks and better down tube bearing set up better whatcha call it ya tighten the tube down with also.

[@rubentrevino2372]

BB#1

[@larryshaver3568]

does that red grease lubricate for a long time?

[@tonytaylor5087]

Yes, I love it!

[@Matthew-wj8cm]

I'd love an F-zero bike. Noone will import it to czech republic I'm afraid

[@dalemcminnis2821]

I bought a packaged deal of a felt faker and zeda 100 the vidieo I was directed to didnt come near explaining like this one is there a video showing hoe to mount a two stroke on a felt fake the one he had had a mount on the frame mone dont and its being very frustrating. Thanks.

[@diggingthewest7981]

Having major issues installing the rear wheel on the Fzeroseries. I see nothing in the videos, thats pretty important. Wheel rubs brake disk no matter what we do.

[@aryanahmedayan6561]

Did you delivery on other countries like Romania?

[@wesleystepp30]

Can u put different handle bars on f zero.

[@scootertuningfl2174]

Hey Tony you put the bars on wrong they go towards the front you have them upside down the mount always goes at the back of the bars

[@tonytaylor5087]

I know. They’re much more comfortable closer to the seat.

[@scootertuningfl2174]

@@tonytaylor5087 can't argue with that lol

[@CMG78]

@@tonytaylor5087 that bike needs all the help it can get as far as comfort is bar none the most uncomfortable bike I have ever sat on.

[@tonytaylor5087]

Haha it’s definitely not a beach cruiser! Overall I’m liking it. The seat could use some cushion tho 😅

[@matthewhorsman9562]

How can I get one those kind bike

[@stelthcamo357]

My 18T sprocket came broke had some bearings that fell out of it on the back wheel

[@drohrstestes]

Bought a bare F-zero frame on sale. Looking for the seat. Seems BB sells the seat but no hardware comes with it. Where can i get the full kit like the one you have there?

[@tomperalta8551]

I love mine I need to find rain guard for the front wheel when it rain it socks need help

[@MierCatCustomz]

anyone know what max safe speed for F-zero is / is is suitable for 50 MPH builds ?

[@motorizedbicyclenation53cu90]

Wel… with heavy duty wheels I’d say 40- 45 is safe over that sketchy but get ya some old moped wheels 19”-21” and run those it’ll be perfect for up to 70!

[@motorizedbicyclenation53cu90]

Good spoke moped wheels and tires if ya go over 40 get the tires for it! Get the best tires continental or Kevlar heavy duty tubes and tires. If ya can find a moped wheel to fit like a 22-24” wheel go for it

[@motorizedbicyclenation53cu90]

Also I hear those Gemini guns are great if ya feel like waiting for it

[@motorizedbicyclenation53cu90]

Gemini wheels

[@larkbrinkley3584]

Just got mine today! Everything is broken(seat, wheels, kickstand, brakes, and frame damaged).

[@conniejarrett8749]

This video doesn't show how to mount the chain and rear wheel? Anyone have any ideas? We didn't get the instructions with the bike.

[@LeoAnastasopoulos]

My chain and rear wheel didn’t come attached?

[@motorizedbicyclenation53cu90]

Not super tech.. well better than lithium grease but not good in wheels

[@tonytaylor5087]

What’s better?

[@lokeyzkeyzsquad3866]

Mine didn’t come like that black bottom bearing housing is not pressed on bike so can’t use

[@stelthcamo357]

You can use threaded rod with a nut and washer on both ends and press it on or use a big c-clamp that's how mine came and I pressed it right on

[@kristoferavilez541]

That's mean looking bike without the motor. It's only going to get better.

[@tonytaylor5087]

It sure is!

[@johnpg4093]

Anyone ever put a 4 stroke 79 cc on one of these??

[@johnpg4093]

Hey, how do I claim the prize?

[@johnpg4093]

Or are you a scam? Different name than the channel name

[@motorizedbicyclenation53cu90]

Try red n tacky spend an extra dollar man get the good shit

[@tonytaylor5087]

Link?

[@motorizedbicyclenation53cu90]

@@tonytaylor5087 link? Walmart autozone oreillys Amazon red n tacky high temp grease Or a heavy duty grease usually green must have high drop temp of 375+ 4-600 degreeF is best

[@motorizedbicyclenation53cu90]

Get the Lucas red n tacky # 2 thicker stays in place better

[@tonytaylor5087]

Nice! I’ll check it out next time I’m in town.

[@motorizedbicyclenation53cu90]

The reason I say red n tack is it’s the best for the price or ya can get a small tube of the Lucas heavy duty same brand little better but red n tacky holds up to more heat the best is royal purple that shits great

[@JoseDiaz-ug1xo]

Man!, what a Major Bummer, too hear all the stuff, that can be wrong with these bikes!, I'm glad too!, cause I was just bout to buy one!, I ve gotten motors from them, that were pretty good, but dam shame to hear bout these bikes, that's a lot of money too spend and not right there wrong!, shame on you Bike Berry!

[@reymarley736]

What do you hear?

[@JoseDiaz-ug1xo]

@@reymarley736 about leaks, chain hitting tires, could you put bigger tires on them? ,cause I'd really like ti invest in one

[@atheistconservative6211]

Watch out for the Telegram scammers

[@tracyisaac5266]

James if bikeberry selling it and you plan on going 50mph make sure you make your will out to your love ones.you will die buy bikeberry products.

[@tonytaylor5087]

Gee wiz tracy