BilliB Grandfather Clock setup video

Setting up a BilliB grandfather clock is not difficult and this video will show you how. If you are looking at buying a grandfather clock then come and see our range at www.billib.co.uk or even arrange to come and visit our showroom in Bournemouth.
BilliB clocks are constructed with the consumer in mind giving ease and simplicity
Remove the clock from the shipping carton after ensuring all the staples are safely removed to avoid scratching the clock
Open the back or side panels of the clock to see the movement.
Remove the cardboard and or chime rod protectors from around the chime rods; slide the cardboard band down and off the chime rods.
Lift the chime hammer transit bars, (if applicable) which will release the chime hammers or cut the band enabling the hammers to move freely.
Replace the back and or side panels.
Move the clock to its final location, now hang the pendulum.
Hang the weights, making sure the clock is square and level.
Now give the pendulum a good swing, all BilliB clocks will go straight into balance* and start chiming.
*Automatic balance Feature is standard on most BilliB clocks

[@janicebrowningaquino792]

I have wished for a grandfather clock for more years than I care to admit. I especially love the bonnet top apparently cherry finished clock. I will watch this video whenever I am longing to hear these sounds. Perhaps one day....

[@richardkendrick2109]

Hi Janice, when yo are ready, please let us know & we will more than happy to help. BilliB.

[@Rhythmman14]

@@richardkendrick2109 hi, getting a grandfather clock is something i’m thinking about (i have to save money first) but as soon as i have enough, i’ll definitely go for billib :)

[@kennethkriegshauser5599]

2:05 chain driven 4:57 cable driven 7:54 hands on guide 1:38 setting up

[@bigben1859]

Bigbemn,,,kkkko

[@cobesclocks1949]

@@bigben1859 what

[@tehseen]

So nicely demonstrated.

[@muhammadnurlailul3368]

I love clock

[@kennethbeckham7720]

To restart a clock try the following. Be sure that the chains are pulled straight down and the weights are at or near the top. Do not set the time. Start the pendulum swinging. This may take many tries before the clock will continue to run. Now stop the clock when the time it reads at a time when you can work with it again. Start the pendulum swinging about 15 minutes before what the clock reads. Stay close. It may need to be restarted again. After it is running OK, move the minute hand backward slowly to the correct time. Good luck.

[@bfdiaandblueyfan2024]

Smiling cats

[@8901WCTENNESSEE]

every 15 minutes how do you sleep?

[@3nd0net36]

i like it

[@Benicio_Fols]

i love this video

[@cobesclocks1949]

Ok

[@user-rq9po2zv4k]

Дякую вам за працю 😊❤

[@shawnmccori]

One day I will time my car engine valves with a grandfather clock design. Some guy will come around and say his grandaders made that and he has been running it for billions of years after he builded it.

[@user-xx2vt5um3s]

I have a watch with the same description, but this is very old, but there is no heart case. The clock from 1890 is older than this year of manufacture.

[@3nd0net36]

I will Choose the cable driven

[@ALMAHDI86]

Greetings from Indonesian antique clock collectors

[@collinsnwagu1149]

How do you adjust the chain

[@josephfrye7342]

hey there i realized sligh clocks and your clock billib clocks brands are using hermle german movements. and hello from america.

[@Animedudeingmango]

Cute😊❤

[@Joseph-fd8bp]

wowwww

[@josevalenzueladiaz4631]

Como puedo comprar uno de estos bellos relojes?

[@InezRobinson-yn8yk]

I'm trying to figure out how to put the pendulum The benjamins on the grandfather

[@charlesbri147]

I have a 3 weight driven wall clock. 2 of them have the same weight and the other is more heavy. Which position shall I attach the weights?

[@phyllisslattery8048]

The heavy one is to be hung on the right side as you stand in front of it.

[@cailinevelyn]

The heviest (not sure if said it correctly) weight need to be at the right.

[@jakejayjay283]

Grandfather clocks by Billib are made by sligh

[@billibclock]

Not correct. Sligh haven't produced clocks for BilliB for over 15 years

[@playerone988]

@@billibclock cool

[@MikeV8652]

@@billibclock Then, why does it say "Sligh" at the top of the face on some of the clocks in the video?

[@scottymcdonald126]

What if the chains are pulled out of the clock?

[@tuileriesantiques9057]

You will either have to get them replaced, get an expert, or re - string them yourself

[@Normal762]

Im in phillipines but i wish i had that

[@bfdiaandblueyfan2024]

BilliB Truman Clock

[@Mikko1234]

Kellot

[@irenealonso9233]

My chains camo of all 3 took the clock apart but can't figure out how to put them on any one help

[@doloreslopezparras8314]

Por favor decírmelo en Español....no entiendo el ingles

[@nickdorfnus]

hello. my kids pulled on the chain so that the weights are at the highest point. I cannot get them down. How do you reverse the direction of the weights

[@Brooks_Adams]

Nick Daddario let the clock run for a while then it will be better

[@thersdiary2562]

How much please ?

[@yaser65]

عندي منها اريد تصليح

[@doloreslopezparras8314]

Mi reloj carrillon de tres pesas no toca las campanadas. Me pueden ayudar a solucionarlo?

[@LibertariosAlGobiernoMilei2023]

Llévalo a un buen relojero, es la mejor opción.

[@hieptranthanh9081]

I was in Vietnam, I can order the how this clock?

[@dariowiter3078]

It's "I am in Vietnam," dummy, not "I was in Vietnam." If you can't write English properly, then stop learning English altogether. 😠😠😠😠😠

[@thersdiary2562]

Dario Witer according to me , understanding his meaning is more important than English grammar . Anyway , English language is not his mother language. I still can understand what he means. It is the important purpose of the question !

[@christallane8542]

@@dariowiter3078 it's just a question what's wrong with you? like do you need help because there is someone called a doctor.

[@jasonshorologicalplace9459]

@@dariowiter3078 what is wrong with you idiot it was just a question

[@V.G.F.]

@@dariowiter3078you good?

[@user-bd8ob6ty2d]

Сколько стоят эти часы

[@e205536]

2:44 Dat Facez

[@bfdiaandblueyfan2024]

0:49 bill

[@ahmedalzobidi9592]

هل يوجد محل اوشركه في بغداد اوفرع لمنتجاتكم ممكن رد

[@bfdiaandblueyfan2024]

0:50 mind

[@doloreslopezparras8314]

En ESPAÑOL

[@imtheman9303]

I love

[@imtheman9303]

O

[@imtheman9303]

Q

[@imtheman9303]

Pop

[@ridwan6959]

Ridwan

[@AhmadDjazuli-lr8wm]

Maaf nada musiknya solmisasi atau doremifasolnya kok kabur tida jelas seperti jam younghans kuno itu.

[@onlyonejennymarie]

The clock isn’t chiming 😔

[@jadeyrogers8681]

Same here. Ours arrived this week. Did you find the answer?

[@V.G.F.]

@@jadeyrogers8681is the chime switc on the “Silent” or “Off” position?

[@svenjahaemhouts3925]

wij werken aan een nieuwe baan in het buitenland te studeren

[@e205536]

Screw Setting Up The Tall Clocks, It Would Be A Waste Of Energy, Well, At Least I Don’t Have To Do It Edit: Welp?. I Wanna Build A Grandfather Clock Now

[@imtheman9303]

P

[@superredyoshiryuto6092]

Sad Intro Song

[@steveamies238]

The gloves what a wank