Rock bucket finish up and try out

[@RisenPhoenix67]

I've been following your progress of that bucket! That's so awesome to see it in action! I love watching your different projects! Rock on Bill!

[@robertagnarp7502]

You have done very good job on this and it works :) have a good time Bill! !!!

[@IRONMAN-kb4su]

That worked and looks friggin awesome Bill great job Son lmao

[@sk84life0]

it works awesome bill . great job my friend

[@SarahJane148]

That was a good idea getting dilly that bike he looks so happy riding it

[@8517mjg]

Thanks Bill, good video

[@thestuffz]

Well Bill, I'd say that was a success!

[@bcarbaugh]

Good job Bill on that sifter bucket

[@eweezy946]

NIce Looks fun as all heck i could mess with that all day lol

[@kadejagodzinski12]

love it bill keep them coming

[@born2flyau]

Bill, For that sharp edge on both sides instead of running a bead along it get a piece of pipe and cut a slot along the length of the pipe with the plasma cutter the length of the bucket edge and slide it over the rough edge an you will have a nice rounded edge to work with.

[@marksheridan5617]

Well done bill, bet your well proud of yourself, also another great video :) keep it up :)

[@fivehigh4718]

looks good bill , turned out really well... got any idea's for a new project in the works, that being tractor attachments that is... looks good man very WELL done

[@scratch1676]

enjoy your video's.

[@mrbluenun]

I was thinking whether you want to try to prevent the ‘Lever mechanism’ on the tractor from going wrong and wearing out using the rock bucket. Maybe an old motor with a lump of steel welded to one side of the shaft so it vibrate might be the answer to vibrate the soil through, and have a one pole switch in the cab area to turn it on when you have a full bucket perhaps?

[@1Ocqueoc]

Q: Why the bar across the top of the tines? Would have been better to cut notches into the tines and lay the bar in them?

[@zx8401ztv]

Bill that was excellent :-)), worked like a dream :-) Dilly is really getting good, he fails when you get too close bill, he dont want to hit you.

[@fillg]

*squeak* I'm not sure why but that little squeak your welding mask makes when you put it up and down cracks me up. *squeak* Good job on the bucket/sifter dooey. *squeak*

[@Blast357]

he doesnt paint thing because he doesnt want to paint them in the first place... even if he look not sure in front of the camera. he doesnt clean things either ;) but things seem to work for him and he is happy, that's the more important. (not saying I would do things like him but Oh well... to each is own)

[@jeremylee99100]

bill will you put another plate for strength on the mounting on doie? like you did on the last bucket?

[@fivehigh4718]

should plug the square metal .. so bees don't make a home in it

[@Seegalgalguntijak]

You could build a copper coil out of the rest of this wire. Play a bit with electricity, making ultra high voltage or whatever. But then, you'd need to use it for something, too...

[@IceMistEclipse]

Is your miller running at the 100% duty cycle? also what polarity are you running at? DCEP? Direct current electro positive?

[@hddm3]

NICE WORK

[@Nortekj]

A good gas shield nozzle anti spatter is nothing other than Vicks Vaporub, it will keep the spatter from actually "melting" into the nozzle shield and the contact tip too. Just a tap on the side of nozzle will cause any inside the nozzle to fall out. A far cry cheaper and better anti spatter that the welding supply stores sells. Plus it will also keep your sinus's open too LOL

[@ke4yoi]

Instead of bouncing the bucket so much, maybe you need to add a vibrator hyd motor to the bucket

[@FishFind3000]

Hey bill if you want you could prob make an insert for the rock bucket for finer rocks/weeks with one of those wire mesh like things I'm not sure what you call it but it's a steel screen you could toss on there

[@IceMistEclipse]

Also, is the miller a Push/Pull Wire feed or just push?

[@kyleshores432]

rofl go dilly,give dad a sobriety test at every turn,gotta make sure he aint spiking the mc-cafe's

[@job38four10]

Now add a grapple lid on it and see if it will scoop up firewood with out dirt, if it does then you really have something, a multi purpose bucket, and then I'll make one.

[@fivehigh4718]

after that you pretty much got all you need to do you're job in the comfort of ur tractor seat ehh... keep on welding buddy ur a good fabricator ... just put more love into you're measurements and making sure things are square really makes life easier .

[@liamcobb3870]

Have u ever tried dual shielded welding

[@TheMetalButcher]

I dunno why you put that solid bar in there. That ruins the whole bucket IMO. Instead of the rocks sliding up on the smooth and going into the back catching part, it looks like it will get stuck on the bar.

[@finpainter1]

nice bucket Bill

[@IceMistEclipse]

I've heard from 3 different farmers saying a rock bucket is very hard on the equipment and to expect stuff to break often? Heard this from 3 farmers that have "used" this attachment not just hear say!

[@Will-jb6kr]

You can take rattle can paint and paint your weld nozzle that will help. Doesn't last forever but helps keep the slag off.

[@ExploringCabinsandMines]

Hmm good idea!

[@mdlovi]

can u try out the new farming simulator 2013 titanium edition

[@KarasCyborg]

How long did it take you to build the bucket? Have you see Robo The Rock Picker?

[@M4runner4x41983]

thats good mechanics wire bill.. hold up calipers an such

[@naterade21]

ever think of puttin a performance exhaust on dillys bike?

[@hitmynuts11]

where do you buy your wire?

[@theinqwest]

have you found any bodies when you been sifting yet?

[@Kronkus36Outdoors]

Good day Billy !

[@KohalaIronWorksCase]

Like having a "Grizzly" but portable...

[@IRONMAN-kb4su]

Oh and Dillan HIGH 5's buddy like a boss !!!

[@Marshmouse100]

Check Dilly's jump at the 35:24 mark... He's gotta be 4 feet in the air! You were busy with the next to last bucket lift..

[@TheDanblack]

just to let u know bill welding on the tractor like that can short out the battery or worse mate

[@jeremylee99100]

bill you didnt by more to put in stock?

[@ShotGuntomy]

bill did you get the bridge don ?

[@patamos7019]

Looks good.....why buy when ya can build!

[@soundman115]

the helmet sound in fast motion at 18:00mins in is pretty funny

[@Redgonetogray]

Ok, so when can I come buy that rock bucket from ya?

[@PorcupineLawnSnow]

Paint it hot pink!!!! ;)

[@fivehigh4718]

how does it defeat the purpose? its 2 inchs wide lol, it does nothing but make the bucket structurally sound.

[@Fitmamatinc]

Dropp the add.. but do like those too!!! KK

[@billstmaxx]

i think the fork project get that going

[@theredneckgarage6976]

I've been looking on here like did he start it yet darn no!!!!!!! but I want to make a pair of forks for my ford tractor for the 3 point do you think that will work

[@theredneckgarage6976]

hey bill dilly is like he was ment for a driving a dirt bike hey PS this is josh from Facebook and ill be posting some vids of the shil here soon

[@marcuswhite8532]

If u get an excavator u could buy a rock bucket with it

[@devinjsmith8]

Do a farm sim multiplayer

[@rexbecker3419]

What is the bucket supposed to do

[@MrTrollHunter]

Success :D But why do you call your son stinky?

[@nahtan14]

why dont you paint them before you use them so they dont rust

[@nahtan14]

no shit sherlock but the parts that scrub off will usually stay shiney from the use the other part wont rust cause it would have paint on it

[@cdub8200]

Good day tubes? How is she goin?

[@nicholashubbard9026]

its called expanded steel

[@Blazeoak1]

looks like a gient cat litter scoper

[@Fitmamatinc]

check your spelling OKK Mr Bill the Friednly Fan!!! and Friends!!! cool stuff! make sure you make it watchable for all... language is a bit harsh...lol. :-)

[@billstmaxx]

both

[@charleslambeth4358]

now that's done lets build a bridge...

[@Bullwinkle39]

the paint just scrubs off with use

[@watchthe1369]

Lindt? That ain't Lindt chocolate!

[@shrimp1037]

hi

[@Chevy5Speed]

Hi

[@kiknlif]

Hey what happened to "Gooday tubes! how's she goin?"??????????????

[@billstmaxx]

1.50/lb x 44lbs = 66.00

[@mynameisnobody4409]

........but no rocks, wtf ?

[@nickwest3157]

don't give dilly any bad ideas

[@ethanwaldron]

how much whould you sell that old atv for bill and you should have your daughter drive the dirt bike

[@xpack10034]

do you work in a grave yard

[@bryantchase9432]

yes he does

[@ChampTruex]

frig rights

[@MrOly0001]

gee thats what i said

[@billstmaxx]

jeez im not to sure

[@tgddcv1]

take the rapping off first then put it on bill

[@umvhu]

Have you ever come across the phrase 'over - engineered' :-D

[@Tristan102100]

you stole the words right out of my mouth!

[@Jda9905]

that cemetery is full of little kids hes run down on dirt bikes making videos

[@yougoon5115]

you do more talking then working but I know your trying to tell ppl about how to make something now get working