Everything you need to know about a surface cleaner in six minutes

Pressure washing and Parking Lot Striping Training courses!
www.billydavidsonvip.com/?r_d...
Looking for a parking lot striping equipment?
www.billydavidsonvip.com/Powe...

[@billydavidsonvip]

www.billydavidsonvip.com/ Check out our website for the most exclusive pressure wash training available online

[@Killuminati2o12]

Incredibly smart and detailed video man! Thank you. You literally explained everything you need to know about a surface cleaner in 6 mins.

[@rome288]

Thank you for your explanation. I appreciate your expertise!

[@666backwood]

Solid video, thank you for input and high quality information.

[@ajohnsonpressurewashllc]

This was so helpful and the best use of 6 minutes I’ve had in 3 months! I am a starting out in the business and needed this information. Thank you 😊

[@wildwestwashservices7612]

Great vid! I needed that info. Thank you.

[@fingolfin9086]

I’ve watched at least for other videos involving whiteboards talking about surface cleaner tabs and this is the first one. I actually understood. Thanks.

[@CleanSurfacePowerWashing]

Another great, informative, much needed video! Thanks 👊🏽😎

[@strawberryshirt87]

Awesome video, thank you Billy !!!

[@I_DELIVER]

Great content Billy, thanks for sharing your knowledge❗💲

[@flatdog691]

Great video thank you and have a great Friday

[@jasonchampion9932]

Good job explaining. The only thing you left out I believe is letting us know what the gallon and the inch ratio he is For running the proper Surface Cleaner for the proper gallons per minute washer. Thanks again for taking time out of your life to help others! 🙏💙✌

[@rustyshaklford5642]

I like the way this man explains things

[@billydavidsonvip]

If there's anything I could ever help you out with don't hesitate to let me know

[@shaunengle]

Thanks for helping me with my new job !!

[@navimonge]

Great info. Thank you

[@mattspontiacta]

Billy I run a 20” surface cleaner with a 4 gpm Hotsy 4000 psi. When I have a driveway that’s not that dirty and I don’t need all that pressure I just throttle back the throttle lever half way and I am good. Appreciate all your videos man. Thanks for doing those they have a lot of good information. Thanks .

[@DyEpAiNtBaLl2020]

I run a 20" whisper wash with 4 3gpm tips on a 12gpm pump and I can literally run and clean concrete! 😆

[@vinceking7878]

@@DyEpAiNtBaLl2020How long do the bearings last on the surface cleaner?

[@wallacewimmer5191]

Gold nugget tips as always Billy 👍💵

[@Al_W_On_The_Trackz]

I appreciate this video. 👍🏽

[@rahmanrucker4408]

Great video thanks

[@Scottchmorsco]

thanks, great info

[@slickspade]

Awesome. Thanks.

[@andyjcoop]

Very glad I watched this video thank you

[@billydavidsonvip]

bit.ly/BillyDavidsonResource

[@richsainsbury2285]

Great info

[@elionelcenturion3525]

Thanks for the information, I've been buying spray nozzles only focusing on their degrees, not the gpm...

[@crovax17]

Reminds me of learning about optics with telescopes and eye peace’s. Focal lengths etc

[@TheGravygun]

Great video Billy. I learned a lot and I've been doing this for 10 years

[@billydavidsonvip]

Thank you

[@TheGravygun]

I've got the new Honda 800 a gallon per minute and I had a driveway that was brand new still had the cream on it. I did two passes and I stopped now I know thank you brother

[@TheGravygun]

How can I lower the pressure on a machine that's a monster like that to do a driveway I've been doing it through the ball valve seems to work

[@TheGravygun]

I have been able to lower it through the ball valve to keep it from coming off the ground

[@tellitlikeitis5028]

Thank you 😊

[@billydavidsonvip]

Looking for our training courses? Please text 985-345-0778

[@andyjcoop]

Hey buddy I am overseas in Australia would be interested in purchasing the link how do I get in touch? I cant call would cost me triple on overseas charges haha.

[@smithdrainsolutions7328]

Good information. I currently own a drain cleaning company that specializes in hydro jetting. Your video has me thinking about adding a service. Thanks!

[@carlossaldua5298]

Thank you Sir always insightful 😎 Do you use an online filter to protect the nozzles and if so which one?

[@BadWeatherfreak]

I have a 16 inch surface cleaning with a 4gpm and it came with 2502. I felt it was too much pressure. Change it to 25025 and it made a big difference

[@michaelrobledo5090]

What brand .?

[@studyrxyoutube]

I subbed because of how technical he got with it lol bad @$$ great video 👏 simple and detailed.

[@davidschmidt270]

Thanks Bill 👍👏

[@billydavidsonvip]

David Schmidt hey if you looking for a way to get a bunch of new work I put together a little video and I’m charging $15 for someone to view it as many times as they want just let me know if you’re interested

[@davidschmidt270]

@@billydavidsonvip I'm started from scratch with next to nothing money but thanks just the same

[@JustinMentionedIt]

Where you get the tips at? Iv googles them for the dewalt and can’t find any

[@jonathanvick2944]

Good!

[@tiqee06]

What’s the optimal height that the tips should be from the concrete? Currently mine are 2 inches from the bottom of the skirting!

[@sneakerheadlowlife4484]

How do u open the tips, do they come with the other sizes?

[@mwunder6358]

Just found your channel today and I love it! As a newbie, what spray type pre wash cleaners (like degreasers, etc) do you recommend for concrete to get it really good and clean? Or do I even need to worry about it if I'm hitting it with 4000psi?

[@billydavidsonvip]

Hey it's awesome to hear from you! If it's just standard concrete with not a lot of stains on it usually you can use just pressurized water to clean it. If it has a bunch of automobile stains on it I would suggest using purple power to spot treat each section then power wash afterwards

[@andreamanning2428]

Nice video!

[@billydavidsonvip]

Thank you!

[@andreamanning2428]

@@billydavidsonvip welcome. Hugs

[@annzhong9591]

I saw a new model that can be used for both cleaning floors and washing underchassis. "EVEAGE Upgrade 2-in-1 Undercarriage & Pressure Washer Surface Cleaner...", have you tried this one? how does it work?

[@ivan_money_bags5295]

What if I were to clean tile and grout what tip would I use

[@Carvalhol10]

Hello buddy, got a 4200 psi machine 16 LPM which will be around 4 gallon a minute so, which is the best deal that i can get? Be is a good brand and good surface? thanks mate =D good video by the way helped a lot! cheers

[@jacobfuchs1955]

What grease do you suggest?

[@NoName-be5ir]

I have a 4gpm 4000 psi PW. And now in the market for a surface cleaner that’s not spending 1000,s on one. Maybe a link to the one you got there . Do you have good control with plastic at high pressure?

[@tocarules]

I always thought the second number was thousands of an inch. Like 11003 means 110 degree spray angle with a 3 thousandth opening. Not like it matters, but you can buy the plastic tips with a stainless or even ceramic insert for a lot less than the "SS" or solid stainless or SS11003. To be honest, I'd experiment with the angle over the size of the orifice. Go with an 6004 or wider like an 8004 that will stop leaving streaks as the fan is so much wider. It would be quicker as well.

[@jj-vn9hl]

does your surface cleaner psi have to exactly match your pressure washer machine psi?

[@bryanhryb3598]

It shouldn’t split the PSI in half if your running 4 gpm tips and have a 8 gpm your pressure will still be at 3500 PSI. If you were to use bigger tips it would lower ur pressure but you should be getting 3500 psi with the 4 gpm tips.

[@buyteslastonk]

I've been learning a lot and was confused the first few times I watched this and I was about to say the same thing.. tips split gpm not psi. Glad someone else was paying attention.

[@austinprescott4039]

So does that mean when you put the larger tips on your a little higher than 800-900 psi?

[@whitecliff4361]

Do they come already greased when new ?

[@pumpman8170]

I bought a 12gpm 2500 psi machine to use for sewer jetting and just washing down pump stations for sewer plants. I dunno how i came across your channel. But after watching alot of your videos. I feel like a expert in pressure washing and its not even what i do.

[@billydavidsonvip]

Brandon Martin thanks for those kind words

[@jbrwing937]

Very thorough explanation. Can you suggest a surface cleaner to use with our gasoline powered Troy Bilt Honda engine 2600 psi 2.3 GPM power washer? Thank you

[@billydavidsonvip]

Hey given those parameters and specifications of your particular machine I wouldn't recommend getting anything over a 15 inch surface cleaner. Usually you can buy those units at Home Depot or Lowe's for about $100

[@stevesimonetti9669]

Great info. Question....I have used several different brands of these. All work great day 1 but then the spin rate drops making them useless. What am I doing wrong?

[@bcnewsvideo]

If you want the Rolls Royce of surface cleaners, buy a Mosmatic. I bought they're 21 inch Surface Cleaner, and been using it for 3 years. It's never broken down and doesn't need to be lubed.

[@mohamedbazzaz447]

What is your machine is rated 4200 psi but the surface cleaner is advertised as 4000psi. Can you still use it? Is there anything else to know?

[@josephbailey7408]

How tight should you put them in? Like high should the tip be from the ground after they are in? I tightened mine till it was hard to move, while still lining up the bar and the nozzles

[@billydavidsonvip]

Yes that is the correct way to do it. If you over tighten it it could actually break the threads

[@micahmore2645]

What about a 3.5 gpm 3400 psi dors that matter tips wise like do,you need to,change em

[@ju4st14]

Does my pressure washer matter to find the right surface cleaner? If yes or no. Can you help me find a really good and cheap one? Like around $90-130 I'm really in a budget right now. My pressure washer is: 2300 PSI. 1.2 GPM. Thank you!

[@BadWeatherfreak]

What is your take on 2 tips vs 4 tips surface cleaner?

[@billydavidsonvip]

Bad Weatherfreak I really don’t like 4 tips

[@IamLegend-1985]

Hey Billy, I run a 5gpm machine with this surface cleaner, when I'm worried about the integrity of concrete I dial back the pressure valve (black knob) in fear of etching, is this efficient or is it pointless, I definitely feel less pressure and lift from SC so it feels like a correct adjustment? Thanks brother, love the videos.

[@billydavidsonvip]

Yes that is definitely one way to lower the pressure, you could also use larger spray tips if you want to get better flow rate

[@MannyAguilarJr]

25035 or 40035 should get you at about 2000 psi as long as the unloader is set to the pump head pressure when the gun is released.

[@kimjordan1516]

I just bought a 22” surface cleaner, I don’t know which water hose to use!

[@nicholastedeschi2867]

Hey Billy can you help me with my surface cleaner please? I have a Simpson 4400 psi 4gpm belt drive unit and I use a 20” Simpson surface cleaner. Now when I use this it lifts off the ground. What tips do you recommend I used so I don’t damage the concrete? Thank you for your video.

[@billydavidsonvip]

I would recommend using a 25030 This would allow 3 gallons per minute per spray tip. Even though you only have a 4 gallon per minute machine this would lower the psi pro tip If you are doing extremely old concrete then you could use 15030 this would increase the psi per spray tip

[@amandamcbride256]

Hi. Newbie here. Can these be used on tiles and slightly uneven surfaces? Or, should i purchase one with caster wheels? Just hope caster wheel one would work for flat concrete later too. Thank you! Great info.

[@billydavidsonvip]

Yes if you get one with caster wheels it does work a little better on uneven surfaces Before using it on any type of tiles you will have to make sure that there are no loose or broken pieces

[@amandamcbride256]

@@billydavidsonvip ok. Thank you ssoooooo much for getting back to me. I will be sure to. Just starting out. First official job is a big one.

[@jon2786]

Could you just use a ball valve at the end of the hose and adjust it accordingly with stock 25 degree tips??

[@billydavidsonvip]

We don't recommend doing that because it constricts the pump and pushes it into bypass mode. Also the ball valve only cuts down on flow not psi

[@jon2786]

Got it thank you! I won’t do that then! I could rinse with a ball valve and male quick connect though correct? Or what is the best to rinse with?

[@peterbuilt1506]

What kind of tip would I use for pavers that are mildewed.

[@billydavidsonvip]

Use double the size tip recommend it for your pressure washer flow

[@robertomacias2394]

What’s a good tip for oil stains ??? Great videos

[@billydavidsonvip]

We really like purple power degreaser

[@robertomacias2394]

Thank you 🙏

[@ShadowTetsuo9999]

I have a mi - t-m 20 inch , it was given to me. The only difference between it and yours is on the bottom of mine there are two holes at the bottom of the swivel that let a lot of water out. Is that normal or is that a sign it needs to be replaced / repaired?

[@billydavidsonvip]

Yes basically that it is a sign that the swivel or either of the O-rings inside the swivel are blown. Probably be best just to replace that swivel

[@r.a.m.productions1229]

Do you use different-sized tips in the surface cleaners? We're trying to do our homework.

[@billydavidsonvip]

Yes depending on the surface you were cleaning and the power of your pressure washer you may have to switch out your tips. But both tips will be identical under your surface cleaner you cannot mismatch tip sizes

[@wesleyjohnson5854]

Do you put teflon tape on those tips when you screw them in and do the suppose to screw all the way down. I have a m-i-tm 20in and when I put teflon tape on my new tips they would no screw all the way down. It's still works with no leaks but does this affect my cleaning

[@billydavidsonvip]

Yes we always use to have lawn just get them really tight but make sure the slot is straight in line with the spray bar. It would be possible to over tighten it so don't go crazy with it but just a good 40 or 50 pounds of torque should be sufficient

[@wesleyjohnson5854]

@@billydavidsonvip yes sir slot is striaght in line with the bar

[@mikemartinez5020]

Where do you get your tips?

[@billydavidsonvip]

Pressure TEK

[@nesnej]

Would this work for parking stalls at a gas station?

[@billydavidsonvip]

Yes but it would be a great idea to apply a good degrees or first

[@ElMANCHILD]

Hey Mr. Davidson so I have a horsepower 4000 psi 4.0 gpm, and I’m only getting 3,200 psi to my 20 inche Northstar surface cleaner I change the nozzle tips and still getting the same pressure. When I hook up the power washing gun, I get the full 4000 psi. What do you think is going on? Thank you so much.

[@MannyAguilarJr]

Could be the guns. Concrete Cleaning is recommended around 2000-2500 psi so you're looking at 25025 or 40025

[@ElMANCHILD]

@@MannyAguilarJr gotcha, thank you

[@michaelc7283]

Hi Billy Davidson, I have a few questions. I purchased a 24 inch surface cleaner from a craigslist sale. It has a 3 bar and 3 tips. Each are label 15015 and they where not set at 12 & 6 (parallel to bar) I'm going to use a 4200 psi with 4.0 gpm pressure washer. Would i need to change the tips on the 24" surface cleaner to 2502 × (3) = 6 gpm for soft washing on newer concrete? Again, it has 3 tips. Like you mention don't want to cause any damage. What tips would you recommend on corrugated (rock exposure) driveway and walkways? Also what type or of grease and brand would you use for the 20" surface cleaner? I thought the motor is enclosed greased unit. I think i will also buy a 20" surface cleaner like the one in your video. Any information will be helpful. Thanks

[@dustinboram]

Im using 4gpm 4400psi machine. 16" BE. Mine came with 25020? Am i good?

[@MannyAguilarJr]

I'd say go with 25025 or 40025

[@davidk6264]

I used this surface cleaner with a 4.5 gallon/min machine, using the original tips. I went over a patch of newer concrete (a year old) on a driveway and scoured it badly. Is this what you mean by new concrete? I hear it can take a year to bond properly, is that true? The homeowner said it was probably just poor concrete.

[@billydavidsonvip]

It does depend on a lot of factors most likely your surface cleaner did scored a new concrete. Whenever you doing new concrete you need to double the original size of your surface cleaner tips. Overtime the scorn marks should start to blend in and not be so visible. Usually this takes about two months

[@urfavoritedetailerurfavori6726]

Billy I have a gx390 I think pushing 4 gpm with a 20 inch be surface cleaner. The problem I’m having is it feels sluggish. Should I change tips if so witch tips. Thanks 🙏

[@jacobmoore7556]

What did you finally do?

[@DjBlaze604]

Too big surface cleaner for your machine. Best is 16 or 18 max. Once you go to 20 you sacrifice speed over cleaning circumference. Rule of thumb is 4inches per gpm (4 gpm x 4 inches = 16)

[@angrypotato-kw7fn]

what should i do if i have a 3.5 gpm and 3400 psi? i think i have the same Surface cleaner, the BE. any tips i should get?

[@MannyAguilarJr]

25025 or 40025 should get you at 2000 psi I don't think they exist but 250225 or 400225 would be 2500 psi

[@joegraham9765]

I have a surface cleaner like that. Mine has wheels on it. Did u take your wheels off

[@billydavidsonvip]

No, sir, some surface cleaners come with the caster wheels and others do not. It really depends on your preference.

[@MannyAguilarJr]

There's a model with and without wheels. I believe the last part of the model 407 without 411 with.

[@mjsavea3269]

Can you use the 16” surface cleaner with a 4200 Psi machine?

[@billydavidsonvip]

In my opinion it's not recommended because the surface cleaner will turn to many RPMs in wear out quickly

[@pi3ladbd417]

I've got a 21ltr 200bar Honda gx390 what would be the best tips for me pal thanks

[@billydavidsonvip]

25020

[@bennybenny7217]

035

[@dk4622]

I have a small 14" whirl a way that connects to your gun. It has a grease fitting, but, the fitting is flush to the bearing housing. Nothing is sticking up to attach the gun to. It has a little ball in the center but is flat to the body. Have you seen that before and how do I grease that? Thanks.

[@billydavidsonvip]

There should be a needle valve that you can place on the end of your grease gun

[@dk4622]

@@billydavidsonvip Shouldn't there be a rubber seal? The little ball only pushes in a short ways. My other machines have a standard nipple. I will probably just take it apart since there's not much to it and re-grease it. In one video they took it apart and the bearings had plastic covers still on them so grease could never get to them anyway. Might be better to take a look. Just bought this small one to use on top of brick walls and try it on wooden fences. It's so light it takes off from the ground with any amount of pressure Lol. I'm going to build a solid tube Wand/handle with the hose sliding thru the long handle and quick connected behind me with a ball valve. A gun may not be sturdy enough. Thanks for getting back to me.

[@billydavidsonvip]

Yes I was just looking online to see if I can find something similar but I couldn't. Text me a picture of it my phone number is 985-345-0778

[@dk4622]

@@billydavidsonvip Just look up 14" whirl a way on youtube or Ebay. If your talking about the fitting, it's just a flush circle with a little ball in the center. This thing can handle full pressure but will probably not last.

[@AlexanderClark-zv9ne]

I've used this sprayer several times now on brick pavers, a wood deck, patio, and a driveway. kzbin.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX It has performed as expected on all surfaces. For larger areas like the decks and patios, I think I will be looking into a surface cleaner attachment to speed up the job, or at least make it a little easier. Hose and sprayer connections are tool-less, tight, and quick. I used the yellow nozzle on the concrete/brick surfaces, and the pressure was adequate for cleaning those surfaces.I am disappointed that these units are still being shipped with a nozzle storage holder that allows them to vibrate out of the holder way too easily and become lost, but I don't want to knock off a star for that reason. The functional part of the washer works very well, so I would recommend this product.

[@garyflisram9050]

I have the same unit after 1 use its not spinning ,any advice?

[@billydavidsonvip]

It's most likely your spray chips. If you go to the description of this video you'll find my website. On that website is my personal phone number. If you could text me a short video of the surface cleaner not working I should be able to diagnose the problem

[@couptubegaymer1364]

can i use a 4000 psi 8 gpm surface cleaner with a machine thats 4000 psi but 4 gpm?

[@billydavidsonvip]

Yes just use the appropriate tips size in your surface cleaner to accommodate your pressure wash flow

[@alvchriss2917]

what tips for the surface cleaner would you recommend? if the pressure washer is 4000 psi and 4 Gpm?

[@NouriGains]

I got a 20" whisper wash stock tips, and a 4 gpm "4400" psi simpson... Should I change out the tips?

[@NouriGains]

1502 tips for older concrete, but what would you recommend for new construction concrete?

[@billydavidsonvip]

2504

[@billydavidsonvip]

Double the size of your original tip size for a brand new concrete

[@NouriGains]

@@billydavidsonvip Thank you sir. Take this like/sub. What tip for older concrete? 1502??

[@erikservices]

mine leaking grease at the bottom above the bar. how do I fix it

[@billydavidsonvip]

It's most likely a damaged O-ring and some spinner models can be rebuilt with a kit but most often it's more efficient just to replace the spinner unit

[@erikservices]

@@billydavidsonvip ok thanks

[@zacharycolasanto5292]

Great fucking video man

[@billydavidsonvip]

Thank you

[@sctony2000]

How old does concrete have to be so it is not considered new?

[@zachsheffee8458]

Probably about five years.

[@saulpaul7263]

What tips would I buy for a 5.5gpm

[@billydavidsonvip]

15030

[@saulpaul7263]

@@billydavidsonvip - thank you!

[@studyrxyoutube]

Any thoughts from the community on how big of a surface cleaner I can push with a 3300 PSI, 2.5GPM? 😳

[@billydavidsonvip]

Hey thanks for leaving us a comment. Am I opinion with that size of a pressure washer I would recommend using a surface cleaner that is about 12 inches in diameter

[@Noneofyourbusiness-rq9jq]

Would that fit a will usa tx625

[@billydavidsonvip]

Yes it should

[@Noneofyourbusiness-rq9jq]

@@billydavidsonvip thanks for the reply

[@billcoley8520]

I used 40 degree tips

[@drewlou2]

ANOTHER video Mentioned To Remove The Plastic Seals On The Barring, , Is That Just Bogus!

[@duartepaintinghandymanservices]

For a video about everything that you need to know it sure missing alot of things

[@billydavidsonvip]

I think that's all you really need to know. We could really go deep into surface cleaner science and Hydro dynamics but it would just complicate things. For beginners that's all you need to know to get started! Thanks for watching

[@curtiscook8130]

Great info. Please use a different camera guy. Too much movement.

[@user-we6fd4wv8p]

U lost me...speak English!

[@minhajmunaz]

what do you use to grease it with

[@billydavidsonvip]

We use just a white lithium grease

[@mariuso4879]

Hi Billy, quick question: I've been looking at these cleaners and the majority of them top up at 4000psi with the GPM varying up and down depending on the model. I have a 4400 PSI 4 GPM pressure washer and it's hard to find a cleaner that passes that 4000psi max pressure mark. Any modifications I could make to use one of these at 4400 PSI and 4 GPM ? Thanks.

[@billydavidsonvip]

Yes you can still use a surface cleaner that is rated for 4000 PSI when the PSI is calculated and rated for your specific machine it is measured at the pump under optimal conditions. Such as 60 pounds per square inch of water pressure going into the inlet side of the pump "which is uncommon on most facets" in addition they measure the outgoing psi directly at the pump without any pressure hose. That being said if you hook to a standard garden hose that is 100 feet long to feed your pressure washer you're not going to receive 60 psi on the inlet side that will reduce your psi by at least 200 psi. They get you down to about 4200 psi on the outlet side. Now let's remember the psi is measured at the pump with no pressure hose and that's how the manufacture comes up with this number. Once you put on a 50 feet or a 100 foot pressure hose and a wand then the psi is reduced even more! 100 feet of pressure hose reduces the pressure by approximately 300 psi in addition the water Hass to make to make a 90° turn to go through the wand. This again reduces the pressure by another 150 psi anytime this water hast to make a 90° turn. Therefore lowering your realistic pressure to probably just over 3700 psi which is well within the range of a 4000 PSI rated surface cleaner. I apologize for this long message in any typos but if you need any other help just let me know

[@Autobotsunited]

@@billydavidsonvip that’s an excellent explanation. Thank you.