Bin AEA: Finally we found one with problem

[@preciadocisco]

I have spent over 10k on expensive air rifles like Brockock, FX, RTI Prophet that failed only after a few months, but your guns are so easy to repair and powerful and reasonably priced. I really appreciate that. That's why your stuff is selling out like hot cakes. Thank you.

[@preciadocisco]

You guys are funny and cool. Thank you for all the tips. Easy guns to repair and very little o-rings. Like a Russian AK.

[@preciadocisco]

K.I.S.S. Kept it simple stupid, I like the way you think. Airguns should be less complicated and easy to fix for the average person. You are really onto something. Like I said, I feel your guns are like a Russian AK 47, tough and easy to repair.

[@tomc7777]

@sigshooter I have a chance to buy same gun with same issue…. Is the valve pin the likely solution?

[@Chosenbygod1010]

I just came into some money and I’m actually planning on buying a few rigs and upgrading. Like a terminator, a S45 and a megalodon or a harpoon. I’m completely up in the air. Advice would be great

[@tbane8913]

i got hp max .357 barrel leaking when filling, now what?

[@bobbygeneperry2589]

I have been very indecisive about what pcp brand and gun I want to buy. so much so that i have been looking and researching for the last year. Your customer service , quality , power and acracy of your guns have made up my mind. although funds are tight at the moment your prices are affordable. Thank you for making such a product that is relatively affordable.

[@brocwavra8813]

Think long and hard

[@Chosenbygod1010]

What’s your website?

[@DYS_72]

Nice pellet trap, is that homemade?

[@richiegoodman9715]

I have 2, I've got a 30cal sniper and just bought a 22cal standard. My 30cal shoots perfect, lights out, but my 22cal shoots a mag great then goes automatic, a 3 or 4 round burst. I've adjusted the regulator up and down and the power wheel both ways and can't get it to stop going automatic. What should I do?

[@sigshooter6213]

Contact us if brought directly from us or contact the dealer you brought from

[@antongonist8294]

What pressure are you at when this happens. In other semi-auto AEA gun this happen when you shoot at too low pressure.

[@richiegoodman9715]

@@antongonist8294 I don't get through the first magazine most of the time after a full 300bar fill.

[@antongonist8294]

@@richiegoodman9715 I think operating pressure for these semi guns is 250 to 150 bar. Do you have problems within that range?

[@richiegoodman9715]

@@antongonist8294 yes

[@nizzmo100]

Hey Bin , maybe you should ship the guns with out the bolt fitted and put It in the bag with the fill probe . Just sayin .

[@sigshooter6213]

Yep buddy we did before, but some customers complained they do not know how to put on. It is really hard to do situations. Thanks for this advise my friend

[@adrianstuart921]

Or package it up for shipping better!

[@Chosenbygod1010]

Hey I’m looking to get a few air guns. I’m looking for a terminator gen 2. Any chance you know who has one in stock?

[@hunterdunlap6566]

Common sense isn't so common now days. Please don't let mechanically changed people drive up the price. I appreciate the service you provide to our community.

[@commonsense818]

Daddy, why is it that when I try to screw on my rifle? But it will not align with the rifle on the final twist. It still cocked out to the right side

[@tirospcpdeensenada2197]

I have a problem with my AEA rifle hp ss Max 357 in the first shot all the air escapes and the air tank is almost empty

[@erics7076]

Mine does it too did you ever figure out what happened

[@Howitzer09]

Bought a Terminator 357 gen 2. Problems started already on day one..😂 Magazine quality is pretty low…

[@preciadocisco]

Question? Can I convert my .30cal HP Max to semiauto?

[@wearisomenomad7946]

When will the 2021 batch be available in the states? I just placed an order for the .30 cal semi auto pistol. Also, how much FPE does the .30 cal version have?

[@sigshooter6213]

It will be in soon. The specifications are on my website

[@IronMan-co8du]

@@sigshooter6213 what is your website and how do I send you private messages about your products? I am looking to buy

[@sigshooter6213]

@@IronMan-co8du my website aeaairgun.net

[@despraterado588]

I know my HPSS is such trash from the factory I'm cutting it up to make it better because absolutely nobody from customer service can be contacted in America. So now I'm making it smaller to make it easier to return in person.

[@scottbolden1]

SOMETHING BLEW WHEN i FILLED IT WITH AIR 21 BAR. what BLEW??

[@harrior931]

When is the AEA one gun coming

[@sigshooter6213]

Please check pcpcom.us

[@小帥哥-g4o]

請問我的aea覺得扳機太重，有無法子能調整

[@一友难求不二人生]

在其他评论看到可调，具体最好联系博主

[@makro921]

Don't be so sure my friend...

[@harteverett]

Planning an AEA purchase soon

[@sigshooter6213]

Thank you my friend, contact me when you are ready for good deal

[@makro921]

A year later..."Finally we found one without a problem"

[@SuperBenjamin1965]

My safety is stuck only had the AEA HP 25 SS for a week oiled no movement I usually shoot when it’s filled will call company and see if they Send a new one a big pain in the rear end It’s probably an easy fix but I really do not want to go inside the gun Box was not damaged I will not place it with the mag in my backpack could be a liability if I decide to keep it I will call the gun lethal injection but I’m definitely sending it back a new gun should run properly other than that I put a Donnie FL Ronan and it runs smoothly no jams no nothing for the price point you cannot beat it I only fill it to about 3450 that’s the sweet spot I keep it on max velocity pretty much for Pest control after one mag I fill it right back up I have hunted for 57 years since I was six so the safety is a priority without that it’s like lighting a cigarette without matches thank you for your time

[@brocwavra8813]

My AEA Carbine is doing the same thing..

[@zhizhizhizhi-zr9nf]

How much。

[@winkydinkandyou]

These are junk. My valve pin broke from sitting. Now it shots only after you cock it each time. Constantly having to fix

[@Tonyncher]

I have one with multiple problems

[@Machster10]

Is this described in your user manual and is it properly translated to English speakers? You sound very snarky.

[@samuelhorowitz5029PLUMBCRAZY]

Key hole

[@Xingbee2019]

like cool

[@davidmurphy5405]

Have you shot the 1800 fps. Full auto 100 round 90 caliber 3 oz slug .. we put a 50 gallon titanium tank on my back and a regulated line to the port... it would have worked well except my brother had it on full auto and when he turned the barrel up to look at the gauge... well it emptied in his eye... funerals next week... so I thought you all would like to make sure yer cocked and locked with yer mags in before you look down the barrel to see if its loaded or not.. that bolt of yours is obviously made of the same crap as the old $29 crossman pump up 850 times and it makes it across the room ... I shot one at a rat... he threw the bullet Back at me Can you believe the nerve . .

[@grandamishwizard1584]

Stop breathing and typing david