Outstanding!! Thank you for posting this! Thank you for taking the time to explain EVERYTHING! You broke everything down into to understandable steps. I don't think you missed a single thing, seriously. Even the direction of the threads on the bolt. How easy that could have caused a problem. Explaining the spines on the punch pins, and which direction on how to strike to remove. Excellent sir, down right perfect. You have a subscriber in me. Thanks again.
@kellyw16482 жыл бұрын
Thanks for posting. I figured out that my pop up pin was broken in half. Now I can fix it myself. Thanks again. Awesome video !!!
@OH8STN Жыл бұрын
Outstanding video. Thanks for sharing the knowledge.
@dstmotion6153 Жыл бұрын
Hey i wanted to ask, for the transfer port part, you unscrewed the bolt with the flathead screwdriver. I was wondering where can I buy that pin/nut/bolt or whatever the name is called?
@mtairgunner4044 Жыл бұрын
I would message Terry at fox air power, he might be able to get you the replacement part you need. foxairpower.com/pages/contact-us
@kellyw1648 Жыл бұрын
I have changed my valve pin like four time and Bin Tac sent me a better valve pin this time, but now when I changed it out my gun is leaking out where you put the fill probe in. I guess that I need to figure that out now. 😮💨
@mtairgunner4044 Жыл бұрын
This brand seems to be a lot of work, but fun when it does work. If this valve pin doesn't hold up you could try ebay seller vstar1100pw. He makes a upgrade valve for these. As for fill leak it if I remember right it should just be an oring inside the the air cylinder piece that your fill probe goes into. Will need a Allen key to pull out the little screw. Sometimes you can also snug up that screw a little and will stop the leak also.
@JeanPhilippeArlet5 күн бұрын
👏🏼hope the disassembly of the sf sniper model is similar or close
@mtairgunner4044Күн бұрын
@@JeanPhilippeArlet it should be really close to the same
@customcutter1002 жыл бұрын
Thanks for sharing! I just had to make a new poppet for my HP carbine. I've been wanting to tear it down further and see how the gun functions. Thinking about trying to make one. Need to tear it down and see how the air feeds from the tank through the poppet to the barrel. On my carbine the poppet face next to the pin shaft had a 45* angle all the way down to the metal pin. Yours appeared very short, about 1/4 the length of my 45* face.
@verdellparentaaawink268 Жыл бұрын
A nice and instructive video thank you
@farnoodbakhshi2 жыл бұрын
Hi, thank you for the great video. Can make a video about the assembly of the gun and general lubrication needed for rebuilding a gun, please?
@farnoodbakhshi2 жыл бұрын
I'm trying to take my HP Carbine apart and reassemble it but not sure what lubrications I need for each parts
@mtairgunner40442 жыл бұрын
I am working for the next week so won't have a chance to do a video for a while, any moving part that is not part of the high pressure air I have been putting wd40 specialist on, it is a dry lube that has been working well. As for in areas that there is air I leave them dry and only oil orings. If you look at the aea mods video I have is show the parts that I oil. For the orings I use superglue oring lubricant, it is safe for use in hpa areas. Hopefully this will help you
@farnoodbakhshi2 жыл бұрын
@MT Airgunner yes it helps thank you very much
@DBRGB6 ай бұрын
Fantastic job!!! And no stupid music. Just great video content that’s informative and step by step instruction. Thank you!!!!!
@thomasliedtke721310 ай бұрын
verry , verry good job !!!! Thank You . greatings from thomas / BERLIN-GERMANY
@captainplanted849810 ай бұрын
GREAT VIDEO!!!. we need more breakdown videos like this. It is very helpful. But more often than not all we ever find on KZbin is bias paid reviews on most things. That have very little information other that how far it will shoot lol. Good job keep up the good work
@blacmex13 Жыл бұрын
What's a good Oring kit? I bought one from Lowes and nothing fits
@mtairgunner4044 Жыл бұрын
You can order individual orings from the oringstore.com, harborfreight.com also has some big kits 1 in a blue box and 1 in a red box that I have had good luck with.
@blacmex13 Жыл бұрын
@@mtairgunner4044 I appreciate it!!
@andybelieves2 жыл бұрын
Thank you for the video, is the black piston that rides on the barrel and operates the bolt plastic or aluminum? Subscribed, keep them coming!
@mtairgunner40442 жыл бұрын
It is plastic
@ciskogreen20762 жыл бұрын
Thank you very much
@drewt88554 ай бұрын
This helped. Where do i find the subsequent re-assembly video?
@danielsegner57022 жыл бұрын
that last screw taken out was geting stuck on the aluminum channel that rides in ripping and gouging aluminum causing the the gun not to cycle than my triger was tering up the aluminum nook it rides in causing it to rock but not slip back to the sear causing it not to fire only shot 350 rounds and owened 2 months befor it quit .30 hp TD $900 I puled it a few days ago found those spots it was hanging up It works fine now but to get it cycling I loaded with a ton of heavy grease
@steverodgers98497 ай бұрын
Can you adjust the hammer spring to increase power?
@DaleAllen Жыл бұрын
Very helpful video! what brand/model of bottle clamp you’re using to attach the bipod. Thanks!
@mtairgunner4044 Жыл бұрын
I got it from bintac @ aeaairgun.net
@TheFowlerAirgunChannel28 күн бұрын
Shakey hands
@mtairgunner404427 күн бұрын
@TheFowlerAirgunChannel Yes, It sucks when having to work with small things but have always had it so am used to it. It can be better some days than others.
@TheFowlerAirgunChannel27 күн бұрын
@@mtairgunner4044 have fun plinking! 💪
@jobikejo14087 ай бұрын
Ara Challenger pro desasambi
@TomE.G.24 күн бұрын
Why are you taking it apart?
@danielsegner57022 жыл бұрын
no you are like me its an ar15 multy tool for taking those off
@john1987742 Жыл бұрын
Hello. Help me understand how the trigger mechanism works. As i understand, nothing holds the sear after the trigger is pulled and the gun is reloaded again after 1st shot, only the sear spring push it up, against the hammer? Is it reliable construction? If the spring will be too soft the gun wil perform full auto?
@arbythepainter Жыл бұрын
What are those cones for?
@mindmanifestations2036 Жыл бұрын
Dude how crazy is it that it takes 5 x the amount of time to strip down my crosman 1332
@mtairgunner4044 Жыл бұрын
These are really simple to work on, which is nice.
@MD-gq6iy2 жыл бұрын
Very nice!…Thank you😁
@customcutter1002 жыл бұрын
Finally decided to tear mine down today. Can't find a video anywhere on the re-assembly. Unfortunately I unscrewed the plastic baffle from the long threaded rod, so I need to figure out the spacing on that for feeding issues. Having some difficulty figuring out how to put the barrel, spring, and long rod assembly back in as a unit? Maybe it goes in individually?
@mtairgunner40442 жыл бұрын
kzbin.info/www/bejne/mp69ZatnhL5-qpI this video might help you put the barrel back on. The plastic baffle you will screw down until the threads of the metal rod are just showing. Hopefully this will help
@customcutter1002 жыл бұрын
@@mtairgunner4044 Thanks for the reply. I finally got it put back together on the 3rd or 4th try. It was a puzzle getting the barrel, rod, spring, clip, nut, and retainer all put back in correct order. I screwed the rod in until it was about 2 threads short of flush on my .25 cal. Just did a function test, and it is cycling, feeding, great. Thanks again for the video and reply.
@troynicolls5377 Жыл бұрын
Thank you!
@cardozopeter80942 жыл бұрын
how much does A EA HP MAX .357 Cal cost
@mtairgunner40442 жыл бұрын
Looks like they cost $599 from www.thepelletshop.com/collections/hp-series/products/hp-series-ss-max-bolt-action-pistol
@Fuerwahrhalunke8 ай бұрын
@@mtairgunner4044 do you know if the disassembly is the same as you have shown here?