Bin / Trash Cabinet

Hello and welcome to Badger Workshop. I needed a bin for the workshop but wanted a cabinet for it so made this.
Tools I use
www.amazon.co....
As an Amazon Associate I earn from qualifying purchases
Support me on Patreon
/ badgerworkshop
Support me with PayPal
paypal.me/badgerworkshop
Social Media
/ badgerworkshop
/ badgerworkshop
www.badgerworks...

[@briansworkshop01]

Nice job looks great thanks for sharing. 🍺🍺👍👍👍

[@Badgerworkshop]

Thank you Brian

[@robertcramb4654]

I just love the casual way you go about your business.

[@Badgerworkshop]

Thank you Robert

[@ochachaway]

Nice, simple and straightforward. Just what I was looking for on you tube. Thank you.

[@paddle_smith]

Nice build, thanks for sharing

[@DariointheWorkshop]

This is actually a very nice bin! It would make for a very nice piece in a kitchen.

[@Badgerworkshop]

Thank you

[@alanmuddypaws3865]

Winging it and using up scraps - my kind of project! Nice job!

[@Badgerworkshop]

Thanks Alan. Mine too

[@markielinhart]

Lovely stuff! 👏🌹🇦🇺✌️

[@StanCrafted]

Lovely build, mate. Looks so much better than a naked rubbish bin.

[@Badgerworkshop]

Thank you

[@jebowlin3879]

A rather beautiful look for a bin, but good on you for using up scraps, a lesson in recycling :D

[@Badgerworkshop]

Thank you

[@MakingItOutOfTheWoods]

trash to treasure? sort of! nice way to use up the scraps! thanks for sharing x

[@Badgerworkshop]

And thank you for watching

[@animationcreations42]

You really squeezed the brass in at the last minute, I was getting worried 😂 I might make one of these for the kitchen, but with one of those push to open catches so I don't have to faff about with the bin lid!

[@bigpete4227]

One of those jobs that we’re all thinking about but never get done.

[@Badgerworkshop]

only taken me 15 months. Not too bad

[@bigpete4227]

Badger Workshop a mere moment in time. Took me 11 years to get around to fixing the sliding cupboard door in the back bedroom and only 15 mins to actually do it. Best not to rush up on these matters I find. The Mrs, she had a different take on the affair.

[@Badgerworkshop]

Got to keep the boss happy

[@user-uh4ld7xx8r]

This is really nice. I wish that I could do this for my kitchen bin. Sigh. Dreams.

[@mountainviewturning5319]

Very nice 👍

[@Badgerworkshop]

Thank you

[@Highlandboxes]

Love this project a great way of using up scrap wood and making a great looking bin store. :-)

[@Badgerworkshop]

Thank you very much.

[@FredMcIntyre]

Nicely done Matt! 😃👍🏻👊🏻

[@Badgerworkshop]

Thank you

[@michaelplays2449]

nice job

[@Badgerworkshop]

Thank you

[@matzmx]

Needs a gloss lacquer to stop the wood drying out.

[@GrumpysWorkshop4]

Great job, i need one of these for my workshop.

[@Badgerworkshop]

Thank you

[@hippoandbearmakes3416]

Came out looking great 👍!! Great use of waste scrap and not a waste at all 😂😂😂

[@Badgerworkshop]

Thank you very much

[@Josh_Luijsterburg]

Hi Matt looks good, perhaps one in the kitchen? It has not ‘bin’ a ‘waste’ 😉

[@Badgerworkshop]

Haha. Yes i might need another

[@InTheWorkshop]

Great job Matt, probably the poshest workshop bin ever 🙂👍👍👍

[@Badgerworkshop]

Thank you very much

[@markgoode4109]

Always very satisfying when those little scraps get used up. Nice bin design and so much nicer than looking at a plastic bin. Best wishes.

[@Badgerworkshop]

Thank you Mark

[@robinaveling5956]

Ok Matt, fab project. Yes I bought the bin twice.... please! Can you supply a cut list for this project as I'd love to recreate it?

[@Badgerworkshop]

I don’t work from cut lists as I use a lot of reclaimed material and make it up as I go

[@raysmith1992]

Nice little project getting rid of off cuts, like the finish, my bin is an Addis plastic one and lives on the decking outside my shed and it even survived storm Ciara when everything else in the garden moved

[@Badgerworkshop]

Thanks Ray. More storms are on the way

[@thegentlemanmaker]

Yours is such a tidy, sawdust free space, it certainly puts mine to shame. I laughed when you said it saves throwing rubbish on the floor as that’s exactly what I do. Best I build a bin box from scrap too!

[@Badgerworkshop]

I tidy up for when i film. I is not like that all the time

[@SMee67]

Not a bad job at all for a make on the fly. 👍🏽 I really like that hard wax colour. 👌🏽

[@Badgerworkshop]

Thanks Bill. Yes i like the colour on this but i did not look right on another project. But you can never have enough cans of finish

[@christopherdean3606]

Love ‘winging it’ projects. My kind of stuff 😂. Great job Matt.

[@Badgerworkshop]

Thank yo very much

[@normanbott]

I put mine on a little wheeled MDF platform because I had some cheap castors I'd never used and the inevitable bit of scrap 18 mm MDF lying about. I like to keep bits off the floor for H&S as well as tidiness. Nice rich brown finish, that hard wax oil looks good on that softwood.

[@Badgerworkshop]

Thank you. Yes the finish covers well

[@Cradley684]

Another good project Matt for tidy workshop, have a nice day !!!

[@Badgerworkshop]

Thank you Brian

[@TheBeerbelly007]

Very good use of scraps Matt---looks great

[@Badgerworkshop]

Thank you

[@tooladdict7463]

Really nice job Matt very posh

[@Badgerworkshop]

Thank you Ben

[@hitmanmb]

It's also a good hight for a shop stool of sorts.

[@Badgerworkshop]

Yes it could be

[@steelpennyforge5152]

Nice way to spruce up a simple bin!

[@Badgerworkshop]

Thank you.

[@hansdegroot8549]

Great bin and good use of all the small strips. Thanks for sharing. Maybe you can make the bin more "sophisticated". Provide it with a remote control (or even better with a kind of speech command opening system) "Open the bin" and you can through whatever you want into the bin from anywhere in the shop.

[@Badgerworkshop]

Haha i think that might be beyond my skill level

[@o.g.bwoodwork]

Great idea for scrap wood. Looks great! Could you put a foot pedal on it so you don’t have to bend down and you could also have your two hands free? Just a thought.

[@Badgerworkshop]

I dont like to over complicate things

[@o.g.bwoodwork]

Badger Workshop fair enough. I would probably be the same if I did that build as well. Sorry to sully a great build with a question of improvement. Loved it!

[@Badgerworkshop]

Thank you

[@mikedeman5351]

Nice design. Works really well :)

[@Badgerworkshop]

Thank you Mike

[@Ema_Punkt]

Great project! Love the recycling, the scraps were really narrow.

[@Badgerworkshop]

Thank you

[@Thesidingsworkshop]

Looks great mate I really must do this

[@Badgerworkshop]

Thank you

[@kalleanka2796]

Looks great. You should have added a way to open it with the foot though, annoying to have to bend over no?

[@Badgerworkshop]

Thank you

[@mixideascreativemic.7341]

Отличная работа! Класс! +

[@Badgerworkshop]

Thank you

[@theislandworkshop8453]

plastic amazon bin, video done, nice one badger thumbs up

[@Badgerworkshop]

Thank you very much

[@theislandworkshop8453]

@@Badgerworkshop hey man are you getting a stall at makers central this year ? we were looking at the smaller hobbyist stalls

[@Badgerworkshop]

I wont make it this year. I went to the first two so taking a year off. Shame as i would like to see your work

[@theislandworkshop8453]

@@Badgerworkshop shame your not coming hopefully you might change your mind

[@Badgerworkshop]

If not i hope to see you next year

[@TheGrantAlexander]

I stopped the at 0:12 perfect, problem solved.. Thank you, plastic one from amazon it is :)

[@Badgerworkshop]

Haha sorted

[@Pete.Ty1]

👍

[@BillHartCooks.]

Nice! You need to do more of the "Fancy Winging it" videos. Sub added.

[@Badgerworkshop]

Thank you Bill

[@stevebosun7410]

Hi Matt, yes, a bit of a time consuming faff using up that strip wood, but what a great recycling project. Looks a bit too posh for a workshop. Well, my workshop at least.

[@Badgerworkshop]

Thank you

[@user-oy4gf6ck5u]

It is no nice that i would use it as a laundry basket in my bathroom . I love it !!!!!!!!!!!!!!

[@Badgerworkshop]

Thank you

[@adammono1839]

I love seeing projects that don't depend on pre dimensioned wood. That's half the work done! Also, no danish oil matt?

[@Badgerworkshop]

Thank you. No oil this week. I thought it would look a little light

[@adammono1839]

Looks great. It's tough to get a good looking dark finish on light wood like that. Is it pine?

[@sumosprojects]

You deserve a bigger workshop, your councils over there must be on drugs to not allow a permit for that, do you really need that lawn space 😮😳🧐, cheers

[@Badgerworkshop]

I would love it to be at least twice the size

[@sumosprojects]

Badger Workshop Council restrictions ?

[@Badgerworkshop]

I would have needed planning permission and to take a tree down

[@sumosprojects]

Badger Workshop If it’s your place it’s worth taking the tree down, you obviously love your woodworking & what’s a tree worth if it’s part of your dream workshop?

[@Badgerworkshop]

I just dont have the money at the moment

[@james6609]

hi matt nice job indeed i see you upgraded your table saw fence can i ask what fence did you use and is it difficult to upgrade it as i have a sheppach table saw similar to yours i commented before on one of your videos about the height of the saw i have put a 100mm base on mine but the fence that you are using is a much better job the fence on the sheppach is a t square type of thing best regards james

[@Badgerworkshop]

I got it from Axminster tools. It is expensive but works great. Just bolt it on. www.amazon.co.uk/shop/badgerworkshop?listId=3MI2F856CUE9O

[@james6609]

hi matt thanks for taking the time to reply to me regards james

[@jamesjames_07]

Amazing bin that. What’s the colour of that finish you used? It’s gorgeous.

[@Badgerworkshop]

It is Fiddes, Rustic Oak

[@alexanderroland9542]

Badger Workshop

[@KataNicole]

How do you keep it from opening when the trash can is full? I’m looking to do something similar, but for shoe storage.

[@Badgerworkshop]

The centre of gravity keeps it closed

[@howardbecdove9780]

Happy hair cut ....... OMG I’ve just become the scary person we all dread. 😩

[@frankves]

I made something similar for my mom once for outdoor use from old pallet wood and Douglas fir. It warped and bowed like crazy. I have no idea how to protect the wood so it won’t move as much. Any thoughts?

[@Badgerworkshop]

I have used garden furniture paint before and it has worked well.

[@himanshusikka9382]

Please upload dimensions, blueprintssn

[@michaelevans1658]

How are you liking the new Clarke saw Matt ?

[@Badgerworkshop]

Its works well now i have done some bits to it

[@BrookesWood]

Ooooo are we going to have a “who can make the shortest & most boring video” competition, challenge accepted!!!

[@BrookesWood]

Badger Workshop not saying this one is your entry bud, it’s a great vid!! 👍🏻😄

[@Badgerworkshop]

Sorry thank you

[@azza1793]

Where was the Indian ink? 😁

[@Badgerworkshop]

Having a week off

[@robinaveling5956]

...and danish oil?😉

[@awantamta]

What a load of rubbish ! Actually that the most beautiful bin cabinet I have ever seen.

[@Badgerworkshop]

Thank you

[@robinaveling5956]

Matt that was a totally rubbish video (well someone had do it) did a lot of footage get binned?😁😁😉😉😉 ...actually it was a real spirt lifter after spending nearly all day the hospital where it's free internet except the useful things like KZbin ☹️

[@Badgerworkshop]

Now i feel i should have used more puns in the video.