Binder Attachments for Sewing Machine

[@SailriteDIY]

If you use a medium or heavy binding that is not possible. But if you use a soft binding you can sometimes create a 90 degree turn by bunching up the binding (because it is so pliable). If you make an internal 90 degree turn you can sometimes pull the fabric so it becomes almost straight then sew the binding on (but if it is a medium or heavy binding the fabric will not every lay down flat again doing that). I hope this helps.

[@carolentin8346]

I have a 1" Swing-Away binder and had hoped to use it with homemade bias tape from rip-stop nylon, 100% cotton, or gros grain ribbon - all of which are thinner than the standard binding tape I purchased from Sailrite. The Sailrite binding is the only product that has worked for me thus far, but it is thicker than I prefer for my applications. When using the Non-Sailrite products (described above) the tape creeps from left to right off the topside to the underside and eventually creeps from under the needle on the top! I have experimented with double layers of fabric, but without success. I have placed the long white magnet along the right side hoping it would be a barrier to the creeping tape - no luck. Is there some concept I'm missing that is preventing success with the bindings that are not from Sailrite? I got the impression that I could make my own and use them.

[@carolentin8346]

I should add that today, I tried your polyester grosgrain binding product on my Ultrafeed LSZ-1 and it slipped from left to right within the first 3-4 inches of stitching. You hinted that you have a solution 6 years ago to someone named Jen. I have an account with you.

[@bschonec]

I have the same problem.

[@Pjwhaletailgmail]

Is there a way of going around a corner in a continuous fashion? (i.e. not cutting the binding and starting again on the next side...)

[@heidimansdoerfer1976]

? Can you turn a sharp corner and make a neat bind at a point. Using this binder?

[@SailriteDIY]

Yes, you can drill and tap the holes yourself. Use a 6-40 tap.

[@chatorosales866]

Hello, I’m trying to bind a western hat. However, I’m having one heck of a time. Any help would be greatly appreciated. Thank you.

[@liveinthemomentnow]

Just got my swing binder from sailnet. This video was very helpful in making adjustments to the Binder Attachment. I wonder if I need to change the tension on my machine when using this attachment.

[@hellobro1341]

S Blair jJ

[@SailriteDIY]

If your domestic sewing machine has two threaded holes about 1 1/4 to 1 1/2" away from the presser foot to the right (as seen in the video) then yes.

[@Eussub40]

can it work on a cylinder arm walking foot machine? New tech GC-8B

[@maggieguidry556]

Would this work for a baby lock brilliant?

[@jij1976]

Hi...I am looking for binder/folder attachment for making carry bag handles by folding 3 inch cloth. can you help me out please?

[@SailriteDIY]

Sorry, we do not have that type of binder/folder.

[@dennisyoung4631]

How *DO* you feed those multiple layers into the binder attachment? I have *HUGE* trouble getting multiple layers of fabric into the binder attachment *consistently* - as in it’s pure luck to get it all the way in, regardless of how hard I try!

[@SailriteDIY]

You may be trying to feed the fabric assembly in at the entry point of the binder rather than the exiting point of the binder. Always pay attention to the exiting end of the binder when pushing your fabric assembly into the fold of the binding. If you simply watch the entry point, which is curved inwards to the left, (designed to help work out kinks in the binding as it feeds, but pushes the fabric assembly away from the fold of the binding) you will miss the edge of your fabric assembly every time. So only pay attention to the exiting point when pushing your fabric assembly up into the binder and you will have much better luck.

[@dennisyoung4631]

@@SailriteDIY I *was* paying attention to the exit point! I watched the vid multiple times - will watch it again later. I feel like a total Klutz (not just in this matter - in general, with almost everything.) Note that I have a *much* easier time with smaller (and thinner) pieces of fabric, e.g. two thicknesses of 1000 d. Cordura, with both pieces being scraps about the size of a hand. Then, I more or less duplicate the results in the video. The things I have trouble with are fairly sizable, e.g. messenger bags, soft luggage, and yesterday, a backpack - and I struggle to control the mass of fabric - in all senses, and not just with edge-binding.

[@khadijamarshal160]

Can i use in jack mashien also?

[@Celticswynd]

It should then because I have two threaded holes in her to attatch a seam guide. It's an old Singer 66 from the 1920s.

[@dianadivadiamond]

Loving this attachment. Would it work for BROTHER BM3700?

[@AandF]

I have a thick 2 mm mil spec webbing that I would like to bind with this what is the max thickness binding it can fit without having issues? Thank you, great product.

[@SailriteDIY]

I have tested the binder with webbing that is up to 1 mm but 2 mm would probably be too thick and not fold over correctly. I would recommend it for webbing up to 1 mm.

[@senensaldonmontes8441]

How to order, I've been looking for this kind of binder, for my vest jacket

[@SailriteDIY]

You can order here: www.sailrite.com/Sewing-Machines/Sailrite-Sewing-Machine-Parts/Binders

[@globalmilitarycollections4591]

Do you have an attachment that can turn fabric into 1 inch webbing?

[@SailriteDIY]

Sorry, we do not.

[@radscoot]

How do you determine which width of binding to use? Is there a calculator?

[@SailriteDIY]

Sorry, not calculator for which binding width to use. If you like you can email us and tell us about your project and we can recommend a width of binding for your particular project. email at [e-mail]

[@adriananavarro9550]

Hola,esa máquina hay en ARGENTINA??,GRACIAS.

[@hennacorrie7345]

Will it work on Zoje zj9513 straight machine?

[@SailriteDIY]

Yes, it should.

[@wendylittleh3209]

hi I am looking for a binder for my industrial machine to use with light cotton self made bias tape will your product also do lighter weight fabrics.

[@SailriteDIY]

It will for the most part work with lighter weight bindings. I have not yet found a light weight fabric that will not work in the binder attachments. If it does not work you may return it for a full refund within 30 days of purchase (minus shipping).

[@Celticswynd]

Will these work on domestic machines as well?

[@marionlewis4703]

Only if you have 2 screw holes to the right of the presser foot.

[@exoticbandage3198]

Can this fit a janome cover pro 1000

[@Pjwhaletailgmail]

Thanks - I'm used to making mitered corner on quilt bindings but this is more heavy duty...

[@moyertubin]

What if I don't have the screw holes? Can I put them in myself?

[@InFlorida4252]

Will the binder attachment fit a Consew 206RB-4 machine? There is a 1" diameter metal plate with 2 screws in it at 5/8" distance from the center's of both screws. there are 2 small holes, spaced 1/2" apart just below those 2 screws. Thank you, Betty

[@SailriteDIY]

Hi Betty, Yes, the binder should fit that sewing machine.

[@vieuxacadian9455]

Thanks for all of the videos

[@moyertubin]

So if I want my bias to end up being 1/2 inch what size binder would I need?

[@4570Govt]

Will these swing-away binders work on other straight-stitch and/or walking food machines, such as Juki's, Pfaff, Consew, etc?

[@SailriteDIY]

In most cases, yes, they will work on other brand sewing machines. If your sewing machine has two threaded holes to the right of the presser foot (about 1 1/4" away from the foot), then chances are high that they will work great with those sewing machine brands.

[@jens9432]

I purchased one of these and I'm having issues with the bias tape staying even on both sides and also the bias tape is bunching. Is there a reason why this might be happening? It's very frustrating...

[@SailriteDIY]

Hi Jen, I can help you solve that issue. However, I did not see an order in our database from you (using your name as the search), did you purchase the binder and binding from Sailrite? If so, please provide me the order number and I will be glad to help you solve this issue.

[@carolentin8346]

@@SailriteDIY This looks like the same problem I, (Carol Entin) described on March 4, 2023. I have a Sailrite Ultrafeed LSZ-1 machine and your swing away binder. Since you have hinted that you know how to solve this problem, could you please share the solution? I am using YOUR polyester grosgrain product and it slips from left to right to the underside of the fabric as I sew. This migration occurs within the first 3-4 inches.

[@Dottie237]

I have a Innovis 1500D sewing machine ( embroidery/sewing machine) it has the snap-on feet. Will your binder fit on this machine?

[@SailriteDIY]

If your sewing machine has two threaded holes to the right of the presser feet (about 1 to 1 1/4" away) it is possible it will work. If not, you may return it within 30 days for a full refund (60 days for store credit), minus shipping.

[@josephinem1790]

hello can i use the binder to do swimwear using lyrca ? i would any other advise you can give

[@SailriteDIY]

Josephine - I have not used the binder to sew swimwear made from lyrca. However, my bet is that it would work. If not you can return the binder in 30 days for a full refund to Sailrite (minus shipping).

[@salamm5300]

Sailrite sugano

[@MegaBull8]

Do you have attahments for folding jeans seam?

[@fludrbywest3886]

If that worked with a singer or another machine it’s awesome 👏 thank you for sharing , I wish I had your machien 😘

[@kamalsagwara133]

nice How I cane buy

[@barbarathurston4760]

How do I put a binder on aJanome 4120QDC sewing Machine

[@SailriteDIY]

email us a photo of your sewing machines needle plate area and we will respond. Email us at [e-mail]

[@fb932]

Hello je ne sais pas parler English pourriez vous me dire la marque de votre machine a coudre merci

[@SailriteDIY]

Bonjour, La machine à coudre que nous utilisons dans cette vidéo est la Sailrite Ultrafeed LSZ-1. Voici un lien vers cette machine à coudre: www.sailrite.com/Sewing-Machines/Portable-Heavy-Deav-Sewing-Machines

[@fb932]

@@SailriteDIY merci c gentil(le) de votre part bien à vous

[@djworld222]

I want....how will I get

[@SailriteDIY]

You will get here: www.sailrite.com/Sewing-Machines/Sailrite-Sewing-Machine-Parts/Binders

[@sovonpersians3868]

Is this a needle feed machine? I'm looking for a binder for my brother 742, I've been told they're impossible to find for a needle feeder, is this correct?

[@SailriteDIY]

No, this is not a needle feed sewing machine. However, we do use this binder on our Sailrite Fabricator Sewing Machine with is a needle feed or compound walking foot and it works great. I can't say for sure it would work on your machine, but you can try it and if not return it within 30 days for a refund, if not.

[@kathyakers9014]

Will this binder work on a janome 9500 sew & embroidery machine?

[@SailriteDIY]

In most cases, yes, they will work on other brand sewing machines. However, I am not sure if your Janome 9500 has two threaded holes to the right of the presser foot, if not, it will not work. If your sewing machine has two threaded holes to the right of the presser foot (about 1 1/4" + - away from the foot), then chances are high that they will work great with those sewing machine brands.

[@bennieslagter7543]

What machine is that? Looks great!!

[@SailriteDIY]

+Bennie Slagter You can find out more information about that sewing machine here: www.sailrite.com/Sewing-Machines/Portable-Heavy-Duty-Sewing-Machines/Ultrafeed-LSZ-1-Sewing-Machine

[@bennieslagter7543]

+Sailrite what a fab machine, 2 bad the shipping costs are making it way over my budget!!

[@hmongyanggirl]

Will this binder fits the Juki 1500 coverstitch machine?

[@SailriteDIY]

I do not think it will. Does your sewing machine have two threaded holes about 1 to 1 1/2" away from the presser foot on the right?

[@skateboarddman]

CAN I USE THINS BINDER ATT TO A DOUBLE NEEDLE MACHINE?

[@SailriteDIY]

Yes, you can. It should attach to the base of the machine just as it did in the video above. You may not be able to get two stitches into the width of binding, but it you will at least get one stitch into the binding.

[@itsastitchup]

If I was binding a quilt, how would I turn a corner?

[@barbarak413]

Linda's Luscious Lathers look a Bernina demo

[@betonarchese]

Can I do hat brims with this?

[@SailriteDIY]

+betonarchese Yes, we do have customers doing that with this binder.

[@parveenlata2824]

Can we use it with any brand sewing machine

[@SailriteDIY]

If your sewing machine has two threaded holes about 1 1/4" to 1 1/2" to the right of the presser foot then this binder should work.

[@SailriteDIY]

You can purchase these binders at sailrite.com. Just type "binder" in the search at the Sailrite site.

[@radheshyamsharma1276]

Haw purchase binders in India have you any dealar in India?

[@SailriteDIY]

No, we do not have dealers in India, but we do ship worldwide.

[@MegaBull8]

Where do I buy these attachments?

[@Ethelem312]

Where do you find the binding tape?

[@SailriteDIY]

You can find the binding tapes at this link: www.sailrite.com/easearch#!&ea_q=binding

[@SailriteDIY]

If you want the binding to end up a 1/2 inch on the top side and 1/2 inch on the bottom side then you need to order a 1 inch binder.

[@sajidansari8761]

How can I buy this in India....

[@sirajuddinbablu9265]

sajid bhai aap 9993138481 phone laga kar binder ( Folder ) banvasakte ho

[@garmentsprocessdevelopment4376]

Where I buy this binder

[@SailriteDIY]

You can buy them here: www.sailrite.com/search?keywords=binder

[@mariajesuinavieiralima8933]

Olá amei. Aonde compra

[@SailriteDIY]

Você pode ver os preços aqui: www.sailrite.com/Sewing-Machines/Sailrite-Sewing-Machine-Parts/Binders

[@Diybauen]

Hi! How do these feet work with curves? I'm looking to add binding around tight curves (baby bibs). Thanks!

[@SailriteDIY]

This video may help with the curves you need to do: kzbin.info/www/bejne/Y2eTomt5rrSZe6s

[@maryochoa991]

donde puedo comprar esa máquina soy.de nicaragua

[@luiscano412]

Mary Ochoa no es la máquina es el dispositivo para adaptarlo a una máquina.

[@atastyspamwich]

I know they are high quality, but really? 125 usd for a 2 inch binder! That like a quarter the cost of the machine itself.

[@SailriteDIY]

Yes, that type of binder is expensive. But it also works.

[@raufjaleel8317]

Make one for yourself.

[@julungwangi3440]

Saya minat..Belinya di mana..?

[@SailriteDIY]

Anda bisa membelinya di sini: www.sailrite.com/search?keywords=binder

[@julungwangi3440]

Sailrite terima kasih infonya..

[@achmadyanichannel2679]

nice funnel sir

[@anamariadecarvalhopignolat5589]

Eu quero quanto custa?

[@SailriteDIY]

Aqui está um link para nossos fichários com preços: www.sailrite.com/Sewing-Machines/Sailrite-Sewing-Machine-Parts/Binders Here is a link to our binders with pricing: www.sailrite.com/Sewing-Machines/Sailrite-Sewing-Machine-Parts/Binders

[@sailingguy8778]

Can these be used for binding carpet?

[@laverneh2030]

Nice machine!

[@vilsonkushwaha7965]

10 Inch binding

[@khadijamarshal160]

Oh wow!!!

[@kamalkamel6185]

Machine à coudre à gants en cuir mince

[@zaibwanis9918]

Good

[@rustammd1926]

Rustam

[@sureshdabhi4624]

👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼

[@maricelasalazar7480]

hi maricela Salazar i like

[@fatimafatoma2873]

magnificence

[@barby88ful]

QUIERO 1!!!!!!

[@master.afzaal]

,.👍

[@tifokalid2593]

😂😂😂😂😂👍

[@chrisyates8115]

What a voice! Yuk!

[@cmetube]

Very crappy and cheap knock off of professional binders. These aren't worth beans and only simply confuse novices and the general public by ripping them off entirely.

[@SailriteDIY]

I think you are mistaken. Yes, you will find a lot of cheap binders on the market, but not the Sailrite binders. The Sailrite binders are made in Japan for Sailrite. I would love to have you send me a link to the professional binders you are referring to above. Hopefully that link will include some videos showing how they work. If you can't I will assume you were mistaken.

[@cmetube]

no, you are mistaken and clearly selling inferior products to novices and people who have no way of knowing any better. Of course you do have an incentive to make money and cannot be but biased and self-serving

[@SailriteDIY]

So... do you have a video link to the binder you are recommending? If it proves to be a good binder maybe we will start selling it also. We always want to sell the best products to our customers and we strive to accomplish that task. Otherwise I don't believe you can beat our for the price and performance!

[@dclopton2]

Another great video from Sailrite. Thanks for the quality machines and accessories. I own another brand of industrial sewing machine but am saving for a portable Sailrite machine. A satisfied accessory and supply customer.

[@Happybidr]

cmetube You sound like an emotionally biased person who was...fired by the company at some point? Because you're all accusations and zero facts or evidence. Sailrite's products and videos have always delivered exactly what they say they will. Top quality, reliable. Time for you to put up or shut up.

[@user-wf1yh2cr9f]

How we can buy like this blender ?

[@kamalkamel6185]

Machine à coudre à gants en cuir mince