Bingo Airsoftworks Mancraft PDiK HPA Engine Review

[@achilles_kbab]

Great video man! This has been super helpful to me. Would you possibly consider doing the same style video on the newer version?

[@Nerolit1995]

Funny thing: in Poland strongest mancraft conversion had around 1000 fps at 40.g bb's. Ppl here usually use it with a&k svd or JG m24. Standard fps range is 550-700, but once i saw a guy who had 850 on chrono. Thank god that there aren't ready-to-go guns with mancraft installed because a rich kid running with 700 fps sniper rifle is just dangerous...

[@BingoAirsoftworks]

Are you talking about the Mancraft PDiK or the SDiK?

[@Nerolit1995]

SDiK

[@TheZiggerot]

no kidding, 1000 fps is the speed of a handgun bullet. standard eyepro probably won't protect from that

[@Nerolit1995]

+TheZiggerot Nah, gunfire shop used mancraft tuned up to 1k fps + to test revison ballistic glasses...it didnt penetrate..

[@TheZiggerot]

Nerolit1995 but can you say the same about the softer, cheaper plastics surrounding the lense on a common paintball mask? I could imagine it punching right through and knocking a tooth out

[@andrewshie224]

BingoAirsoftworks how good do you think this engine is? Compared to P* SMP V12? Is it worth it?

[@mikleman996]

interesting, im a semi only player so no full auto does not bother me, looks like a cool little unit, i really wish they would a V3 version as i really want to HPA my ICS GALIL but a wolverine unit is £330 here in the UK

[@MrBombilder]

+Michael Grant they do a version 3 in their other version but it is currently sold out.

[@kyleeaton7939]

Hey! Could you tell what type of range you could get with this set up? i really want a good DMR and I was hoping this system would work well as an engine for my DMR build. Love your videos!

[@kidsphonenh]

Do you thing you could fit it in a v7 gearbox

[@jounatanleonardo1332]

Bro how much like that?

[@airsoftghillie3370]

Lol that trigger pull. Do you think you can do a review on their SDiK ? I received mine and I love it but I want to see what your opinion is about it.

[@seshollowaterboyz7721]

Thinking about buying one, cheap for $243!!! Link to buy?

[@facundocorradini]

Looks great. Extremely consistent and really quiet. Not my cup of tea (I like GBB, the more recoil and the louder, the better), but I certainly recognize Mancraft did a really good job on this one.

[@djxandman99]

This looks alot like the internals of an old Kokusai crimebuster Engine. Back in the day people would convert them to fit in AEG bodies. With thtis it looks just like a Crimebuste engine but made to fit in a V2 gearbox shape to eliminate the modding of a body,

[@NepaAirsoft]

Y-Adapter is something you put on it? Would you be able to put a MP5 Selector Plate on it and Nozzle and 'maybe' have ti work?

[@BingoAirsoftworks]

NepaAirsoft The "Y" adapter comes with the engine. An MP5 would be a bit of work. The trigger would have to be transferred and would need to verify it worked. There is a pass through hole for the fire select, but the largest problem would be the mounting system, since the MP5 doesn't use a trigger pin or rear body pin, a new under carriage would have to be fabricated.

[@NepaAirsoft]

MP5s are awesome, just more work upgrading is all. : )

[@ScoutSniperMC]

I'm more interested in the Bolt action sniper rifle version, the SDiK. Seems like it would be a bit more suiting, and its only about 150$. + a 60$ AGM sniper rifle, + some other goodies, you'd have a pretty kick ass sniper rifle!

[@airsoftghillie3370]

Seems like it would be very successful, where did you find that price at ?

[@ScoutSniperMC]

bit.ly/1yahn1q Convert Polish PLN to USD, through multiple websites. Shipping not included

[@airsoftghillie3370]

wait..lol 500,00 ? 50k or 500k ?

[@ScoutSniperMC]

Direct exchange from website. i.imgur.com/lEJdXdj.png Currency option in upper right hand corner.

[@airsoftghillie3370]

I saw the SDiK on the website, and translated it to english, but the prices were never an option, thanks :)

[@BingoAirsoftworks]

Note that Mancraft has updated the PDiK to eliminate the dual air lines. See www.bingoairsoftworks.com/mancraft-pdik-hpa-engine-review/

[@airsoftghillie3370]

Do you think you can put this in a L85 ?

[@BingoAirsoftworks]

AirsoftGhillie Probably. It would be a bit of custom work to get the trigger valve to operate correctly though.

[@airsoftghillie3370]

Ah okay thanks, do you think you could ever try it ?

[@knightmoritz1895]

talk to mancraft directly. They like to do custom stuff, at least they liked to do it.

[@62heliman]

What jewel rate was it shooting at?

[@billnye4548]

Hey, I've been playing airsoft for a couple years now, have a complete loadout and I'm a big gas blowback use all my rifles are gas blowback. Would you recommend this to someone of my level? I'm intrested in hpa but not really willing to spend money on a polarstar

[@BingoAirsoftworks]

If you only shoot semi-only and are using the M4 platform, the PDiK is a really good option for you when going HPA. You'll still need an air rig and tank that delivers < 120 psi to the Engine. But with the PDiK you won't need to worry about batteries or electronics.

[@iBagBodies]

What's the lowest and the maximum PSI the system can operate at? I like it, but the two point mounting system for the engine seems like it could have alignment issues.

[@BingoAirsoftworks]

Unfortunately I don't have the engine any longer (it was sold a few minutes after I demonstrated it, heh), but based on the design, I'm sure it can go to 40 psi or maybe lower and still operate fine. It only needs enough pressure to retract the nozzle, so it would easy to get the engine below 300 FPS w/.2g bbs, for example.

[@BingoAirsoftworks]

I'm not sure on the maximum, but it would be limited by pressure ratings of the nylon tubing. I'm sure the engine could go to 150 psi with no problem.

[@ronpaulprez12]

how much would one of these cost?

[@ljudevitbinder9114]

Those hoses seem like they will come off any time and they are cramped inside the grip. That is the only thing that bothers me. Other than that,this is great. And much,much quieter than the others. Pure mechanics,no electronics means excellent reliability. Excellent

It seems the trigger throw is not that much once you put the trigger pin that holds it back, in.

[@Z3BES]

Is there any cheaper alternative to an hpa engine? They're badass but....I'm poor.

[@PaperScarecrow]

The is the cheapest one out there right now. But with the growing popularity of the HPA systems there might be some cheaper versions coming out of china in the future.

[@frittev]

Ok the polish produced mancraft PDIK looks like a semi sniper dream if you could just do something about the trigger pull... that unit how does it fit in a 417.... that is the real question ;)

[@MriTryHard1232]

Hey Bingo, how do you suppose i attach a 4mm hose to a 6mm sized valve on my HPA RedLine Regulator.

[@BingoAirsoftworks]

See www.mcmaster.com part 5225K946.for a 4mm to 6mm connector, or use a 4mm to 1/8 NPT thread connector part 5225K711.

[@MriTryHard1232]

BingoAirsoftworks So the first part just simply connects the 2 air hoses together and the second part would just go on my regulator and i put the 4mm line right into it?

[@MriTryHard1232]

Hey bingo, do you know how long it took to ship to you? I'm considering buying a kit for my l96.

[@BingoAirsoftworks]

It was about a week once it was available (I pre-ordered before it was released).

[@jamesgunn8544]

Went to the website, wanted the version 3 for my vss vintorez, but the vintorez uses an offset nozzle, any suggestion for Mancraft hpa?

[@caydenhunter665]

+James Gunn Im pretty sure you can use age nozzles in them...don't quote me though

[@jamesgunn8544]

I may have to stick with my svd and put in the sdik. The vintorez has a custom gearbox and nozzle because barrel is lower than that of an ak47.

[@caydenhunter665]

Oh I see... but doesn't the svd have a specific gearbox not a v3....i only wonder because i was wanting to do a sr-25 build but would much prefer an svd

[@jamesgunn8544]

I have the A&K SVD spring power, no gearbox. My spring svd was a really good price. I would have preferred a semi auto svd, but the svd is a sniper.

[@willshootforfoods]

Awesome videos and awesome jobs on guns! Keep it up!

[@mikegerrard7741]

Well since I'm a mechanical engineer and I have access to University cnc mills I'm just gunnah build one instead of paying the lunatic bill of 350 when I can build this exact piece for maybe 30 40 dollars

[@chotipongiamsamanrg3474]

Hey man can you make a 3d cad of this thing and share to me. Sry for my​ bad ​english​

[@rangerup100]

Out of curiosity, i know it is all in metric so what would i have to do to be able to use my Redline with it?

[@BingoAirsoftworks]

+Shameless Inc. Which redline product? The Firebase? The firebase comes with a connector for 6mm OD air line with a Foster 23-2 plug. You might need another size to match the PDiK air line, but most connectors use a 1/8 NPT thread to connect between them.

[@rangerup100]

It is a firebase but i bought it used, do you know where i could get the 6mm connector?

[@BingoAirsoftworks]

+Shameless Inc. Check www.mcmaster.com part 5225K712

[@theemrtaco]

so what exactly is needed to use this on a sr25? i checked the site and didnt see anything thats sr25 specific like the extention you mentioned. any help?

[@bingoairsoftdesigns4115]

I'm not entirely sure since they've changed the kit to use a gearbox shell now (I haven't seen the new kit yet). But they do list this part: shop-mancraft.com/en/pdik-parts/67-v2long-assembly.html which is what you would use for an SR25. You'll have to ask Mancraft how that part is used with their PDiKs kit, and if you would use the SR25 gearbox shell.

[@theemrtaco]

my sr25 uses v2 gb, its a g&g, thats why this version in the video appealed to me so much since it solved the need for a spacer with the extension but yea

[@theemrtaco]

i emailed them, ill post any updates here in case anyone else is wanting the same thing

[@masterpenguinonpc]

Can I please have the link for this?

[@BingoAirsoftworks]

Jack Albertson Please see video description.

[@liquidflorian]

Would something like this work in a G3?

[@krookimuss]

Yes

[@knightmoritz1895]

any V2 and V3 :)

[@daggermdk118]

Fantastic Review! Not a fan of the product, but the video was very well done! You got a "like" from me! Will be back for more of you vids.

[@eduardoner]

Vídeo please mod one line

[@NoahBoner]

Thank god you cant put a speed trigger, I'm tired of that shit lol.

[@_Fox_Dye]

Not bad..Good FPS but definitely not wort my $

[@RandomloserDK]

For anyone in Europe, this is a cheap alternative to a P*(~625$) or SMP(~500$) as we can get this for only ~267$.

[@_Fox_Dye]

BuMS if you only play Mil- definitely is wort it..

[@jojimughal]

pmed

[@preston2571]

12:19 DEEZ NUTS