BinTac: AEA power enhance kit test on big bore 45LS

[@dakotaburnette5353]

This is amazing power for that grain slug. Will be a great deer rifle

[@martimadi3285]

Thanks for this video and all the time you spend helping your customers Bin. I was waiting for this.

[@Bigbopperairguns]

What will happen if I put 3 washers in on a max power kit? 457 caliber

[@dougiefresh3767]

Nice Vid Pete & Bin! I cant wait to get me 1. I just ordered the Big 9 today. I might have to get some of those washers for mine. 😁👌

[@BombsAwayMineCraft]

Did you ever put washers in it, I just got my big 9 today and would like any info

[@dougiefresh3767]

@@BombsAwayMineCraft Yeah I put the washers in and it basically shaved the trigger sear, and started shooting on its own when ever id cock it. I had to send it back to get it fixed, so I wouldn't recommend. Plus I didn't get any more speed maybe like 10fps but I don't even think it was that much. Stock it gets over 320fpe with a 150 grain bullet. That's plenty good I think. Hope this helps you. Let me know what happens or what you plain to do.

[@BombsAwayMineCraft]

@@dougiefresh3767 if I'm getting that much FPE, I will definitely be leaving it stock

[@dougiefresh3767]

@@BombsAwayMineCraft Yeah I lied. Lol! I was getting 328fpe with a 125 grain NSA not a 150 grain, so you should definitely get that with a 150 grain.

[@briancampbell6898]

Hello sir, I purchased the AEA .50 cal Challenger from Terry at Fox air power .. Can I send you money for this mod for .50 cal???

[@mackattack8627]

Thanks bin from my Mighty Los Angeles 🔫✌️

[@johnmccoy3365]

Is it worth putting on a challenger pro 35 caliber or can you put these on the 357 .pro

[@quantumenergysolutions9128]

Dear Mr Bin. When will the world see a regulated semi auto, with a vertical stick mag of 25x .45cal that has 2500cc of air @5000psi ,something that can do 700-1200 fps? And is a great price?

[@alexw1877]

Hallo, What size do the rings have?

[@airpower7692]

that's plenty power with out the upgrade think I'll leave mine stock and maybe it'll last longer but thanks for the info

[@lindseyzacek5211]

Are you still selling washers for the 50 cal Challenger..I would like an order...of four washers

[@Matthew-wn8oq]

Somebody is gonna blow their head off with that guage on the end of the barrel. I know they are being manufactured on the side of the receiver now but there are a whole lot of guns out there with the dial on the end of the bang tube.

[@gregmcb5305]

Will this effect the total life expectancy of the spring? Is it under constant pressure now?

[@fatimaahmex8469]

Where can I buy the washers for myself how many mm

[@4shinta]

Where did you get them? I tried googling it and nothing comes up. Thank you in advance.

[@donwilson350]

Hey Will those washers also work on the 50 cal air rifle because the one I ordered supposed to been at 4500 PSI and I did not get the gun I ordered I got a gun you guys sent out at 3600psi with the weak spring in it but I am not happy about this one bit I ordered this through Terry he advertise the air rifle is being a 4500 PSI he said it had a 32-inch barrel I am very disappointed in this I did not get what I paid for

[@sigshooter6213]

Yep it works on all bog bore

[@user-se4zb3hq7y]

報哥 為何AEA challenger Pro 灌氣完會從灌氣嘴漏氣

[@roonimac]

What size are these washers?

[@michaelvw11]

Are there kits for the aea hp ss plus 0.30 cal?

[@airpower7692]

where do you get these washers

[@bloodops3751]

Nice job 😄😄

[@nunya6874]

Awesome!!!!! Will send you a PayPal tmorrow! Can you share with us what brand/type bipod will fit on these guns?

[@gmsantafeairgunner2169]

I have a 3 questions First question is do you have washers for the 30 cal bullpup hevi hammer to increase the power also do they make a conversion kit to change the bolt lever into a side lever on the 30 caliber Also is do you have washers for the the 25 Cal varmint or a heavier hammer spring

[@sigshooter6213]

My friend this only works for big bore like Big9,45 and 50 not for rest of challengers

[@gmsantafeairgunner2169]

Let me know if they come out with any upgrades thank you also you said you would check if you had a 500cc tank for the 30 caliber Challenger bullpup

[@jeffreystroman2811]

@@gmsantafeairgunner2169 I have an assine 25 cal with varmint barrel kit. If you unscrew the stock and remove the hammer spring, take it to your local ACE hardware store. I did and for less than 20 bucks I left with about 2 dozen springs the same diameter. By cutting those hardware store springs and mixing and matching I'm able to send a 25 cal 49 grain "projectile" through the thick metal of a 55 gallon barrel. Hey Bin, what I gotta do to get those 30 cal HP mag springs in the mail??

[@gmsantafeairgunner2169]

@@jeffreystroman2811 I love the aea products the only thing I don't like cuz you can't get upgrades and a lot of the vendors don't have parts like a upgraded hammer spring you have to do it on your own I guess I don't see no danger any harm in putting a little heavier hammer spring to increase power foot-pounds and speed thank you my friend I will do that

[@jeffreystroman2811]

@@gmsantafeairgunner2169 try first finding a few springs that easily fit inside where the hammer spring goes, then make sure there's no binding on the guide pin. Then, rather than swapping the entire spring cut a 1/2" off a new spring with approximately same rate (spring rate ie tention) and just add it like a spacer behind the stock spring. See where that gets you then go from there. You'll be surprised how little it takes to make huge differences.

[@naunmartinez629]

He bin is this for the 50 cal also ?

[@sigshooter6213]

Yep my friend

[@pneumaticfanatic7835]

2121 fps damn!! lol awesome work bin when will these be up on your site ?

[@sigshooter6213]

That is a funny nunber

[@tirospcpdeensenada2197]

where can i buy that

[@rickymeredith3918]

Aah sooo their is a secret laboratory !! Hahaha hahaha 😂😂😂😂

[@BakerFarias]

busy but happy

[@sigshooter6213]

Thank you buddy

[@lukes-uf4bc]

Try the 355grs please

[@sigshooter6213]

Of course we will do that later

[@ShootTechSysteminc]

You don't need to Exhaust the air when you do this, but must decock the gun.

[@sigshooter6213]

You do not know what people will do. Haha they do all crazy stuff

[@eddiemoit3633]

Can you send me some washer for my 50 cal I just bought

[@sigshooter6213]

Of course

[@eddiemoit3633]

You have my address thank you

[@user-jk6tj5kw7c]

报哥今日头条怎么不更新了

[@hehengyi7079]

报哥想看点中文的视频了

[@rockpauly3200]

These work on terminators

[@smokeairmd6077]

The 30 or 357 cal?

[@smokeairmd6077]

Did you try them yourself? And how did it perform?

[@user-xo1ep1gc9d]

果然你们都是高手

[@rubenortiz2795]

Vv